Peter Hans Supancic

1 - 50 out of 178Page size: 50

Research output

  1. 2025
  2. Published

    Towards high-strength electrolyte-supported solid oxide fuel cells

    Jana, A., Kraleva, I., Schlacher, J., Supancic, P., Egger, A., Bucher, E. & Bermejo, R., Feb 2025, In: Journal of the European Ceramic Society. 45, 2, 116929.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Estimation of residual stresses in single crystal sapphire wafers through eigenmode analysis

    Gruber, M., Kreith, J., Lohrasbi, S., Bermejo, R. & Supancic, P. H., 9 Jan 2025, In: Scripta Materialia. 259.2025, 1 April, 5 p., 116538.

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2024
  5. Published

    Biaxial bending strength testing of uniaxially curved thin plates using a modified ball on three balls test

    Supancic, P., Maurer, F. & Danzer, R., 1 Sept 2024, In: Journal of non-crystalline solids. 639, 123067.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    The Ball-on-Three-Balls strength test: Effective volumes and surfaces for Weibull strength scaling

    Staudacher, M., Eggel, A. E., Supancic, P. H. & Lube, T., 2024, In: Journal of the European Ceramic Society. 44.2024, 1, p. 173-183 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2023
  8. Published

    The Ball-on-Ring-test: Enhancing an analytical solution by numerical analysis for elastic deformation and small displacements

    Staudacher, M., Supancic, P. & Lube, T., 16 Aug 2023, In: Journal of the European Ceramic Society. 43.2023, 15, p. 7167-7177 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    The B3B Strength test

    Staudacher, M., Lube, T. & Supancic, P. H., 30 Mar 2023.

    Research output: Contribution to conference › Poster › Research

  10. Published

    The Ball-on-Three-Balls strength test for discs and plates: Extending and simplifying stress evaluation

    Staudacher, M., Lube, T. & Supancic, P. H., Feb 2023, In: Journal of the European Ceramic Society. 43.2023, 2, p. 648-660 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. 2022
  12. Published

    Theory of asymmetric and piezotronically modified double Schottky barriers

    Kaufmann, B. & Supancic, P., 14 Oct 2022, In: Journal of applied physics. 132, 14

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Effect of crystal orientation on the hardness and strength of piezoelectric LiNbO3 substrates for microelectronic applications

    Gruber, M., Leitner, A., Kiener, D., Supancic, P. & Bermejo, R., 2022, In: Materials and Design. 213, 110306.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Understanding and controlling inversion boundaries in ZnO

    Scheiber, D., Popov, M. N., Supancic, P. & Spitaler, J., 2022, In: Acta materialia. 229, 117804.

    Research output: Contribution to journal › Article › Research › peer-review

  15. 2021
  16. Published

    A modelling approach to describe the DC current-voltage behaviour of low-voltage zinc oxide varistors

    Kaufmann, B., Billovits, T., Kratzer, M., Teichert, C. & Supancic, P., Jun 2021, In: Open ceramics. 6, June, 11 p., 100113.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Comparison of biaxial strength measured with the Ball-on-Three-Balls- and the Ring-on-Ring-test

    Staudacher, M., Lube, T., Schlacher, J. & Supancic, P., Jun 2021, In: Open ceramics. 6, June, 10 p., 100101.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Local-probe based electrical characterization of a multiphase intermetallic γ-TiAl based alloy

    Kratzer, M., Huszar, M., Tengg, L. M., Billovits, T., Kaufmann, B., Supancic, P., Clemens, H., Mayer, S. & Teichert, C., 26 May 2021, In: Journal of applied physics. 129.2021, 20, 205107.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Measurement of the piezotronic effect on single grain boundaries in zinc oxide Varistors

    Billovits, T., Kaufmann, B. & Supancic, P., 26 May 2021, In: Open ceramics. 6, 100125.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Fabrication of 3D metal-ceramic (Al-AlN) architectures using laser-powder bed fusion process

    Wallis, C., Buchmayr, B., Bermejo, R. & Supancic, P., 2021, In: Additive Manufacturing. 38.2021, February, 14 p., 101799.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Observation of an electrical breakdown at ZnO Schottky contacts in varistors

    Kaufmann, B., Billovits, T. & Supancic, P., 2021, In: Journal of the European Ceramic Society. 41, 3, p. 1969-1974

    Research output: Contribution to journal › Article › Research › peer-review

  22. 2020
  23. Published

    A novel approach to assess the mechanical reliability of thin, ceramic-based multilayer architectures

    Gruber, M., Kraleva, I. R., Supancic, P. H., Danzer, R. & Bermejo, R., Nov 2020, In: Journal of the European Ceramic Society. 40, 14, p. 4727-4736 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Investigation of schottky barriers at Pd-ZnO junctions in varistors

    Kaufmann, B., Raidl, N. & Supancic, P. H., 2020, In: Journal of the European Ceramic Society. 40, 11, p. 3771-3775

    Research output: Contribution to journal › Article › Research › peer-review

  25. 2019
  26. Published

    Modelling of the highly non-linear electrical behavior of ZnO varistor ceramics

    Kaufmann, B. & Supancic, P. H., 6 May 2019.

    Research output: Contribution to conference › Poster › Research

  27. Published

    Biaxiale Festigkeitsprüfung von Keramiken

    Supancic, P. H., Lube, T. & Danzer, R., 13 Feb 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    Fatigue behaviour of WC-Co hard metal under stress ratio and effectively loaded volume relevant to metalworking tool failure

    Klünsner, T., Jonke, M., Supancic, P., Gettinger, C., Krobath, M., Lube, T., Marsoner, S. & Glätzle, J., 4 Jan 2019, In: International Journal of Refractory Metals and Hard Materials. 80, p. 97-103 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. 2018
  30. Published

    Incipient plasticity and surface damage in LiTaO3 and LiNbO3 single crystals

    Gruber, M., Leitner, A., Kiener, D., Supancic, P. & Bermejo, R., 5 Sept 2018, In: Materials and Design. 153, p. 221-231 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Understanding the effect of surface flaws on the strength distribution of brittle single crystals

    Gruber, M., Leitner, A., Kraleva, I. R., Kiener, D., Supancic, P. H. & Bermejo, R., 28 May 2018, In: Journal of the American Ceramic Society. 101, p. 5705–5716

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Atomistic origins of the differences in anisotropic fracture behaviour of LiTaO3 and LiNbO3 single crystals

    Gruber, M., Konetschnik, R., Popov, M., Spitaler, J., Supancic, P. H., Kiener, D. & Bermejo, R., 15 May 2018, In: Acta Materialia. 150, p. 373-380 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Moderne Methoden zur mikroskopischen Charakterisierung von ZnO Varistor-Korngrenzen

    Raidl, N., Sartory, B., Supancic, P. & Danzer, R., 1 Apr 2018, In: Praktische Metallographie/Practical Metallography. 55, 4, p. 192-202 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Auswirkungen von Oberflächenschädigung auf die Festigkeit in spröden Einkristallen für mikroelektronische Anwendungen

    Gruber, M., Leitner, A., Bermejo, R., Supancic, P., Gindel, T., Kraleva, I. & Danzer, R., 2018, Praktische Metallographie Sonderband. Vol. 52. p. 241-246

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Corrigendum to "Surface Crack in Tension or in Bending - A Reassessment of the Newman and Raju Formula in Respect to Fracture Toughness Measurements in Brittle Materials" [J. Eur. Ceram. Soc. 32 (8) (2012) 1491–1501]

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2018, In: Journal of the European Ceramic Society. p. 355-358 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Current dominating paths through ZnO varistor ceramics

    Kaufmann, B., Hofstätter, M., Raidl, N. & Supancic, P. H., 2018.

    Research output: Contribution to conference › Paper

  37. Published

    Failure of Varistor Ceramics

    Danzer, R. & Supancic, P. H., 2018.

    Research output: Contribution to conference › Paper

  38. Published

    Fracture toughness of silicon nitride balls via thermal shock

    Strobl, S., Adlmann, F. A., Supancic, P., Lube, T., Danzer, R. & Schöppl, O., 2018, In: Journal of the European Ceramic Society. p. 1278–1287

    Research output: Contribution to journal › Article › Research › peer-review

  39. 2017
  40. Published

    Strength distribution and fracture analyses of LiNbO3 and LiTaO3 single crystals under biaxial loading

    Gruber, M., Kraleva, I., Supancic, P., Bielen, J., Kiener, D. & Bermejo, R., Nov 2017, In: Journal of the European Ceramic Society. 37, 14, p. 4397-4406

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Influence of Surface Damage and Residual Stress on Strength of WC-Co Hard Metals under Biaxial Loading Conditions

    Harrer, W. S., Klünsner, T., Supancic, P. H., Jonke, M., Glätzle, J. & Barbist, R., 29 May 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Effect of metallization on the strength and fracture behaviour of functional co-fired multilayer ceramics

    Gruber, M., Supancic, P., Aldrian, F. & Bermejo, R., 2017, In: Journal of the European Ceramic Society.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Influence of ferroelectric domain texture on the performance of multilayer piezoelectric actuators

    Kaufmann, P., Röhrig, S., Supancic, P. & Deluca, M., 2017, In: Journal of the European Ceramic Society. 37, p. 2039-2046 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Influence of surface damage and residual stress on strength of WC-Co hard metals under biaxial loading conditions

    Harrer, W., Klünsner, T., Jonke, M., Supancic, P., Glätzle, J. & Barbist, R., 2017

    Research output: Non-textual form › Web publication/site › Research

  45. Published

    Influence of the scatter of strength and of measurement uncertainties on the determination of the subcritical crack growth exponent in ceramics and glasses

    Krautgasser, C., Bermejo, R., Supancic, P. & Danzer, R., 2017, In: Journal of the European Ceramic Society. 37, p. 1873-1878 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Moderne Methoden zur mikroskopischen Charakterisierung von ZnO Varistor-Korngrenzen

    Raidl, N., Sartory, B., Supancic, P. H. & Danzer, R., 2017, Praktische Metallographie Sonderband. Vol. 51. p. 85-90

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Piezotronic Effect on Electrical Characteristics of Bulk ZnO Varistors

    Raidl, N., Hofstätter, M. & Supancic, P. H., 2017, In: Advanced engineering materials. 19, 4

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Strength of WC-Co hard metals as a function of the effectively loaded volume

    Jonke, M., Klünsner, T., Supancic, P., Harrer, W., Glätzle, J., Barbist, R. & Ebner, R., 2017, In: International journal of refractory metals & hard materials. 64, p. 219-224 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Surface strength of balls made of five structural ceramic materials evaluated with the Notched Ball Test (NBT)

    Strobl, S., Lube, T., Supancic, P., Schöppl, O. & Danzer, R., 2017, In: Journal of the European Ceramic Society. 37, 15, p. 5065-5070 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. 2016
  51. Published

    Effects of subcritical crack growth on the determination of fracture toughness in brittle materials

    Krautgasser, C., Chlup, Z., Supancic, P., Danzer, R. & Bermejo, R., 2016, In: Journal of the European Ceramic Society. 36, p. 1307-1312 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Evaluation of Mechanical Strength of Miniaturized Functional Substrates and Components in Different Environments

    Bermejo, R., Krautgasser, C., Deluca, M., Pletz, M., Supancic, P., Aldrian, F. & Danzer, R., 2016, In: Journal of Microelectronics and Electronic Packaging. 13, 1, p. 17-22 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Subcritical crack growth in multilayer Low Temperature Co-fired Ceramics designed with surface compressive stresses

    Krautgasser, C., Danzer, R., Deluca, M., Supancic, P., Aldrian, F. & Bermejo, R., 2016, In: Journal of the European Ceramic Society. 36, p. 4095-4105 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. 2015
  55. Published

    Thermography and complementary measurements as tools to detect micro-irregularities in electronic components

    Röhrig, S., Petschenig, I., Bermejo, R., Hofstätter, M., Aldrian, F., Danzer, R. & Supancic, P., Dec 2015, In: Journal of ceramic science and technology. 6, 4, p. 255-260 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Mechanical testing and fracture analyses of miniaturized ZnO-based multilayer components

    Macurova, K., Gruber, M., Pletz, M., Supancic, P., Danzer, R., Aldrian, F. & Bermejo, R., 26 Oct 2015

    Research output: Other contribution › Research

  57. Published

    Piezotronically Modified I-V Characteristics of ZnO Varistor Ceramics

    Hofstätter, M., Raidl, N. & Supancic, P., 25 Jun 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  58. Published

    Heat development at the microscale in ceramic components - thermography and complementary tools

    Röhrig, S., Petschenig, I., Bermejo, R., Hofstätter, M., Aldrian, F., Danzer, R. & Supancic, P., 1 Apr 2015

    Research output: Other contribution › Research

  59. Published

    Mechanical characterization of miniaturized functional substrates and components in different environments

    Bermejo, R., Krautgasser, C., Deluca, M., Pletz, M., Supancic, P., Aldrian, F. & Danzer, R., 1 Apr 2015

    Research output: Other contribution › Research

  60. Published

    Impact of the Piezotronic Effect on Metal-Oxide Varistor Properties

    Raidl, N., Hofstätter, M. & Supancic, P., 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  61. Published

    Influence of temperature and humidity on the strength of Low Temperature Co-fired Ceramics

    Krautgasser, C., Danzer, R., Supancic, P. & Bermejo, R., 2015, In: Journal of the European Ceramic Society. 35, p. 1823–1830

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 Next
View graph of relations

Contact

Phone: 4109

Latest Research Output

View more (178)