Lukas Hentschel

(Former)

1 - 20 out of 20Page size: 50

Research output

  1. 2024
  2. Published

    Simulation of the Melting Region in Additive Manufacturing Material Extrusion Dies for Highly Filled Feedstocks

    Schuschnigg, S., Hentschel, L. & Holzer, C., 19 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  3. Published

    Multi-Material Implant Structures with Medical-Grade Polyurethane via Additive Manufacturing

    Hentschel, L., Petersmann, S., Gradischar, A., Lebschy, C., Lindenmann, J., Smolle-Juettner, F., Gonzalez-Gutierrez, J., Dias, A., Kynast, F., Hammer, N., Schäfer, U. & Holzer, C., 8 May 2024, In: AIP Conference Proceedings. 3158, 1, 150005.

    Research output: Contribution to journal › Conference article › peer-review

  4. Published

    Material Selection and Process Development of Droplet Based Additive Manufacturing for Medical Implants

    Hentschel, L., 2024

    Research output: Thesis › Doctoral Thesis

  5. 2023
  6. Published

    The effect of coalescence and diffusion on the part generation in the ARBURG plastic freeforming

    Hentschel, L., Maurer, C., Gonzalez-Gutierrez, J., Kynast, F., Schäfer, U. & Holzer, C., 7 Sept 2023, p. 1-1. 1 p.

    Research output: Contribution to conference › Poster › Research

  7. Published

    Personalization of Complex Vaginal Inserts of Ethylene Vinyl Acetate via 3D-Printing

    Eder, S., Kuchler, L., Katschnig, M., Brandl, B., Wolfgang, M., Koutsamanis, I., Hentschel, L., Arbeiter, F., Roblegg, E. & Spoerk, M., 13 Jul 2023, In: Advanced Materials Technologies. 8.2023, 17, 15 p., 2300237.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Effects of Different Polypropylene (PP)-Backbones in Aluminium Feedstock for Fused Filament Fabrication (FFF)

    Momeni, V., Shahroodi, Z., Gonzalez-Gutierrez, J., Hentschel, L., Duretek, I., Schuschnigg, S., Kukla, C. & Holzer, C., 11 Jul 2023, In: Polymers. 15.2023, 4, 18 p., 3007.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Multifunctional Ti3AlC2-Based Composites via Fused Filament Fabrication and 3D Printing Technology

    Liu, D., Hentschel, L., Lin, G., Kukla, C., Schuschnigg, S., Ma, N., Wallis, C., Momeni, V., Kitzmantel, M. & Sui, G., 25 Apr 2023, In: Journal of Materials Engineering and Performance. 32.2023, 20, p. 9174-9181 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Effects of simulated body fluid on the mechanical properties of polycarbonate polyurethane produced via material jetting

    Petersmann, S., Huemer, M., Hentschel, L. & Arbeiter, F., 6 Mar 2023, In: Polymer Testing. 120.2023, March, 10 p., 107977.

    Research output: Contribution to journal › Article › Research › peer-review

  11. 2022
  12. Published

    Freeformer im OP: Projekt CAMed: Implementierung additiver Fertigung im klinischen Bereich.

    Hentschel, L., 1 Aug 2022, In: today. Das ARBURG Magazin. 2022, 80, p. 16-17 2 p.

    Research output: Contribution to journal › Article › Research

  13. Published

    Parameter Optimization of the ARBURG Plastic Freeforming Process by Means of a Design of Experiments Approach

    Hentschel, L., Petersmann, S., Gonzalez-Gutierrez, J., Kynast, F., Schäfer, U., Arbeiter, F. & Holzer, C., 31 May 2022, In: Advanced engineering materials. 24.2022, 11 p., 2200279.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    The Effects of Washing and Formaldehyde Sterilization on the Mechanical Performance of Poly(methyl Methacrylate) (PMMA) Parts Produced by Material Extrusion-Based Additive Manufacturing or Material Jetting

    Petersmann, S., Hentschel, L., Gonzalez-Gutierrez, J., Tödtling, M., Schäfer, U., Arbeiter, F. & Üçal, M., 13 May 2022, In: Advanced engineering materials. 24.2022, 2200225.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Simulations of the filament printing of metal feedstocks with different nozzle designs

    Schuschnigg, S., Hubmann, M., Cano Cano, S., Hentschel, L., Holzer, C. & Gonzalez-Gutierrez, J., 2022, Proceedings of the WorldPM 2022, Lyon.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. 2021
  17. Published

    Extrusion and Additive Manufacturing

    Schuschnigg, S., Hentschel, L., Cano Cano, S. & Momeni, V., 15 Sept 2021.

    Research output: Contribution to conference › Poster › Research

  18. Published

    Thermal conductive, electrically insulating polymer compounds using material extrusion additive manufacturing for electronic parts

    Holzer, C., Cano Cano, S., Schuschnigg, S. & Hentschel, L., 2 Sept 2021, p. 32-32. 1 p.

    Research output: Contribution to conference › Abstract

  19. Published

    Suitability of Recycled PLA Filament Application in Fused Filament Fabrication Process

    Breški, T., Hentschel, L., Godec, D. & Duretek, I., 2021, In: Technical journal : scientific professional journal of University North . 15.2021, 4, p. 491-497 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. 2020
  21. Published

    Processing Conditions of a Medical Grade Poly(Methyl Methacrylate) with the Arburg Plastic Freeforming Additive Manufacturing Process

    Hentschel, L., Kynast, F., Petersmann, S., Holzer, C. & Gonzalez-Gutierrez, J., 2 Nov 2020, In: Polymers. 12, 11, p. 1-15 15 p., 2677.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Factors Affecting the Properties of POM-based Feedstocks for Fused Filament Fabrication/FFF

    Kukla, C., Hentschel, L., Cano Cano, S., Kitzmantel, M., Holzer, C. & Gonzalez-Gutierrez, J., 5 Oct 2020. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  23. Published

    Eingliederung von Additiven Fertigungstechnologien in einen klinischen Prozess zur Herstellung von medizinischen Implantaten

    Hentschel, L., Gonzalez-Gutierrez, J. & Holzer, C., 1 Oct 2020, In: Jahresmagazin Kunststofftechnik : Ingenieurwissenschaften ... : im Fokus . 2020, p. 56-61

    Research output: Contribution to journal › Article › Research

  24. Published

    Qualifizierung von Materialien für medizinische Anwendungen mittels des Arburg Freeformers

    Holzer, C., Hentschel, L., Kynast, F., Schuschnigg, S. & Gonzalez-Gutierrez, J., 15 May 2020. 2 p.

    Research output: Contribution to conference › Abstract

  25. 2019
  26. Published

    Development of feedstocks for extrusion based additive manufacturing for catalytic debinding

    Hentschel, L., 2019

    Research output: Thesis › Master's Thesis

View graph of relations

Latest Research Output

View more (20)