Harald Harmuth

201 - 250 out of 295Page size: 50

Research output

  1. 2010
  2. Published

    Thermomechanical Failure Modes of Steel Ladles

    Gruber, D., Auer, T. & Harmuth, H., 2010, Proceedings of the 49th Conference of Metallurgists; Advances in Refractories V,. p. 465-476

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Thermo-mechanical simulation of two alternative steel ladle linings

    Auer, T., Gruber, D. & Harmuth, H., 2010, Refractories for Metallurgy. p. 94-97

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Untersuchung der Sprödigkeit feuerfester Baustoffe mit bruchmechanischen und fraktographischen Methoden

    Harmuth, H. & Bradt, R. C., 2010, In: Keramische Zeitschrift. 62, p. 264-269

    Research output: Contribution to journal › Article › Research › peer-review

  5. 2009
  6. Published

    An Austrian experience with identification and assessment of alkali-aggregate reaction in motorways

    Fischböck, E. K. & Harmuth, H., 2009, Proceedings of the international conference on concrete repair, rehabilitation and retrofitting 2008. p. 441-447

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Application of attenuation of resonant frequencies for characterisation of alkali-silica reaction

    Fischböck, E., Harmuth, H. & Eberl, S., 2009, Concrete Durability and Service Life Planning -ConcreteLife'09. p. 196-203

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Basic understanding of wear of refractories in metallurgical vessels

    Gruber, D. & Harmuth, H., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  9. Published

    Corrosion mechanisms of magnesia chromite bricks in contact with a secondary steelmaking slag

    Melcher, F., Harmuth, H., Pichlbauer, S., Neuböck, R. & Rössler, R., 2009, 11th Biennal Worldwide Congress on Refractories. p. 26-CD

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Corrosion protection of MgO electrodes at 1400 °C

    Sauerbrey, R., Mori, G., Majcenovic, C. & Harmuth, H., 2009, In: Corrosion science. p. 1-5

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Does combination of different materials influence thermomechanical lining behaviour? A case study for a torpedo ladle

    Auer, T., Gruber, D., Harmuth, H. & Glaser, M., 2009, Refractories in a Shifting Globalized World. p. 23-23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Fractographic investigation of refractories

    Harmuth, H. & Manhart, C., 2009, UNITECR 2009 Summary Booklet. p. 26-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Fractographic investigations of ordinary ceramic refractory materials with reduced brittleness

    Harmuth, H. & Manhart, C., 2009, Fractography of Advanced Ceramics III. p. 209-215

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Influence of burning conditions on beta-SiAlON bond of Al2O3 refractories

    Pichlbauer, S., Harmuth, H., Lenčéš, Z., Šajgalîk, P. & Petrušková, V., 2009, UNITECR 2009 - Unified International Technical Conference on Refractories - 11th Biennial Worldwide Congress. p. 15-dig. CD

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Investigation of slag corrosion by CFD calculations

    Vollmann, S. & Harmuth, H., 2009, Investigation of slag corrosion by CFD calculations. ASMET, p. digital-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Investigation of slag corrosion by fluid dynamics calculations

    Vollmann, S., Harmuth, H. & Gruber, D., 2009, UNITECR ´09 - Unified International Technical Conference on Refractories. p. 25-25

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Investigation of the influence of fluid flow on slag corrosion of refractories by CFD calculations

    Vollmann, S., Harmuth, H. & Buchberger, B., 2009, Proceedings 52th International Colloquium on Refractories, Aachen, Germany. p. 102-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Investigation of the melting behaviour of mould powders

    Kölbl, N., Marschall, I. & Harmuth, H., 2009, Molten 2009, Proceedings of the Viii International Conference on Molten Slags, Fluxes and Salts. p. 1031-1040

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Preparation of β-sialon bonded Al2O3-refractories in different atmospheres

    Pichlbauer, S., Harmuth, H., Lenčéš, Z., Šajgalîk, P. & Petrušková, V., 2009, ECERS - 11th International Conference and Exhibition of the European Ceramic Society. p. 179-CD

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    RESONANT FREQUENCY AND DAMPING ANALYSIS OF REFRACTORIES WITH AND WITHOUT REDUCED BRITTLENESS

    Manhart, C. & Harmuth, H., 2009, Refractories in a Shifting Globalized World. p. 14-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Simulation of refractories resonance frequency

    Gruber, D., Auer, T. & Harmuth, H., 2009, UNITECR'09, 11th Biannial Worldwide Congress. p. 27-dig.-CD

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Uniaxial and biaxial fracture behaviour of refractory materials

    Tschegg, E., Fendt, K. T., Manhart, C. & Harmuth, H., 2009, In: Engineering Fracture Mechanics. 76, p. 2249-2259

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Untersuchungen zur Anwendung der Dämpfung von Resonanzfrequenzen zur Bewertung der Alkali-Kieselsäurereaktion

    Fischböck, E. & Harmuth, H., 2009, 17. Internationale Baustofftagung IBAUSIL 23.-25.9.2009, Weimar. p. 2-0277-2-0281

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. 2008
  25. Published

    Characterisation of the melting behaviour of mould powders

    Marschall, I., Kölbl, N. & Harmuth, H., 2008, 6th European Conference on Continuous Casting 2008. p. 17-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Corrosion of magnesia chromite refractories in the RH-degasser

    Melcher, F., Reiter, V. & Harmuth, H., 2008, 51st International colloquium on refractories. p. 121-124

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Durability of Brick Lined Steel Ladles from a Mechanical point of View

    Gruber, D. & Harmuth, H., 2008, In: Steel research international. p. 913-917

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Hot stage microscopy for in situ observations of the melting and crystallisation behaviour of mould powders

    Kölbl, N. & Harmuth, H., 2008, Scanmet III 3rd International Conference on Process Development in Iron and Steelmaking. p. 73-81

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Identifikation und Beurteilung der Alkali-Gesteinskörnungs-Reaktion

    Harmuth, H. & Fischböck, E. K., 2008, In: FSV aktuell : Mitteilungen der Österreichischen Forschungsgemeinschaft Straße und Verkehr (FSV). März 08, p. 3-4

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Influence of an irreversible expansion of a teeming ladle lining on its thermo-mechanical behaviour

    Gruber, D., Auer, T., Harmuth, H. & Buchebner, G., 2008, Refractories in Metallurgy, 51st International Colloquium on Refractories. p. 73-75

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Investigation of Slag Rim Growth in the Continuous Casting Process

    Marschall, I. & Harmuth, H., 2008, Scanmet III 3rd International Conference on Process Development in Iron and Steelmaking Volume 2. p. 419-425

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Mechanisms to reduce cracking in interior plasters attached to cement bonded permanent shuttering panels

    Kirschner, A. & Harmuth, H., 2008, In: Construction & building materials (Construction and building materials). 22, p. 99-105

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Microstructal and thermochemical analysis of spinel castables used in steel ladles

    Melcher, F., Harmuth, H. & Reiter, V., 2008, In: Interceram. p. 257-260 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Microstructural and thermochemical analysis of alumina spinel castables used in steel ladles

    Melcher, F., Harmuth, H. & Reiter, V., 2008, XVI International Conference on Refractories Proceedings. p. 206-212

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Microstructural and Thermochemical Analysis of Spinel Castables Used in Steel ladles

    Melcher, F., Harmuth, H. & Reiter, V., 2008, In: Interceram. p. 257-260

    Research output: Contribution to journal › Article › Research › peer-review

  36. 2007
  37. Published

    Charakterisierung der Produktgleichmäßigkeit am Beispiel der Frühfestigkeit von Zement

    Schnedl, G. & Harmuth, H., 2007, In: Cement, lime, gypsum = Zement, Kalk, Gips : ZKG international. 12, p. 96-103

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Development of a device and method for fractographic investigations of refractories

    Manhart, C. & Harmuth, H., 2007, Unified International technical Conference on Refractories UNITECR'07. p. 494-497

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Die Verschleißfutterzustellung des "Franzisci-Hochofens" in Möderbrugg (Steiermark)

    Presslinger, H., Harmuth, H. & Neuper, W., 2007, In: Res montanarum : Zeitschrift des Montanhistorischen Vereins für Österreich. p. 60-63

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Endbericht zum Bridgeprojekt " Verschleiß von Feuerfestmaterialien durch Stahlwerksschlacken"

    Melcher, F. & Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Finite Element investigation of the crack formation in the slag line of a teeming ladle

    Gruber, D., Auer, T., Harmuth, H. & Rotsch, J., 2007, Unified International technical Conference on Refractories UNITECR'07. p. 182-185

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Fracture Mechanical Characterisation of Refractories and Application for Assessment and Simulation of the Thermal Shock Behaviour

    Harmuth, H., Manhart, C., Auer, T. & Gruber, D., 2007, In: Ceramic forum international (CFI). p. E80-E86

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Identifikation von treibenden Zuschlagkomponenten bei zwei zementgebundenen Probekörpern mit besonderen Zuschlägen

    Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Investigation of Refractory/Slag Equilibria in Steel Ladles

    Melcher, F., Reiter, V. & Harmuth, H., 2007, Calphad XXXVI. p. 72-73

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Investigations of corrosionof different alumina spinel castables by ladle slags

    Melcher, F., Reiter, V., Harmuth, H., Rössler, R., Ecker, M. & Molinari, T., 2007, Unitecr '07, Unified International Technical Conference on Refractories. p. 230-233

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Microstructural assessment of alumina porcellain specimens

    Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Microstructural Investigation of four porcellain specimens

    Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Numerical analysis of the thermomechanical behaviour of an EAF roof delta piece

    Auer, T., Gruber, D. & Harmuth, H., 2007, Unified International technical Conference on Refractories UNITECR'07. p. 174-177

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Prediction of the chemical loading of refractories in a cement rotary kiln by means of process simulation

    Emler, R., Harmuth, H. & Nievoll, J., 2007, UNITECR '07 - Unified International Technical Conference on Refractories. p. 577-580

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Prediction of the chemical loading of refractories in cement rotary kilns by means of process simulation

    Emler, R. & Harmuth, H., 2007, 9th Annual GTT-Technologies Workshop. p. 8-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Thermal modelling of a 300t torpedo ladle with Finite Element Methods

    Auer, T., Gruber, D., Harmuth, H. & Zirkl, R., 2007, Thermal modelling of a 300t torpedo ladle with Finite Element Methods. p. 159-163

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Thermochemical characterisation of fayalite slags of the non-ferrous industry and refractory/slag equilibria

    Reiter, V., Melcher, F. & Harmuth, H., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  53. Published

    Thermochemical Modeling of EAF Slags and Refractory/Slag equilibria

    Reiter, V., Melcher, F., Harmuth, H. & Netzer, W., 2007, Unitecr '07, Unified International Technical Conference on Refractories. p. 170-173

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Thermo-mechanical FE-Simulation of a teeming ladle slag line

    Gruber, D., Auer, T., Harmuth, H. & Rotsch, J., 2007, STEELSIM 2007. p. 291-294

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 6 Next
View graph of relations

Contact

Phone: 3200

Latest Research Output

View more (295)