Harald Harmuth

201 - 295 out of 295Page size: 100

Research output

  1. 2010
  2. Published

    Thermomechanical Failure Modes of Steel Ladles

    Gruber, D., Auer, T. & Harmuth, H., 2010, Proceedings of the 49th Conference of Metallurgists; Advances in Refractories V,. p. 465-476

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Thermo-mechanical simulation of two alternative steel ladle linings

    Auer, T., Gruber, D. & Harmuth, H., 2010, Refractories for Metallurgy. p. 94-97

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Untersuchung der Sprödigkeit feuerfester Baustoffe mit bruchmechanischen und fraktographischen Methoden

    Harmuth, H. & Bradt, R. C., 2010, In: Keramische Zeitschrift. 62, p. 264-269

    Research output: Contribution to journal › Article › Research › peer-review

  5. 2009
  6. Published

    An Austrian experience with identification and assessment of alkali-aggregate reaction in motorways

    Fischböck, E. K. & Harmuth, H., 2009, Proceedings of the international conference on concrete repair, rehabilitation and retrofitting 2008. p. 441-447

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Application of attenuation of resonant frequencies for characterisation of alkali-silica reaction

    Fischböck, E., Harmuth, H. & Eberl, S., 2009, Concrete Durability and Service Life Planning -ConcreteLife'09. p. 196-203

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Basic understanding of wear of refractories in metallurgical vessels

    Gruber, D. & Harmuth, H., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  9. Published

    Corrosion mechanisms of magnesia chromite bricks in contact with a secondary steelmaking slag

    Melcher, F., Harmuth, H., Pichlbauer, S., Neuböck, R. & Rössler, R., 2009, 11th Biennal Worldwide Congress on Refractories. p. 26-CD

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Corrosion protection of MgO electrodes at 1400 °C

    Sauerbrey, R., Mori, G., Majcenovic, C. & Harmuth, H., 2009, In: Corrosion science. p. 1-5

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Does combination of different materials influence thermomechanical lining behaviour? A case study for a torpedo ladle

    Auer, T., Gruber, D., Harmuth, H. & Glaser, M., 2009, Refractories in a Shifting Globalized World. p. 23-23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Fractographic investigation of refractories

    Harmuth, H. & Manhart, C., 2009, UNITECR 2009 Summary Booklet. p. 26-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Fractographic investigations of ordinary ceramic refractory materials with reduced brittleness

    Harmuth, H. & Manhart, C., 2009, Fractography of Advanced Ceramics III. p. 209-215

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Influence of burning conditions on beta-SiAlON bond of Al2O3 refractories

    Pichlbauer, S., Harmuth, H., Lenčéš, Z., Šajgalîk, P. & Petrušková, V., 2009, UNITECR 2009 - Unified International Technical Conference on Refractories - 11th Biennial Worldwide Congress. p. 15-dig. CD

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Investigation of slag corrosion by CFD calculations

    Vollmann, S. & Harmuth, H., 2009, Investigation of slag corrosion by CFD calculations. ASMET, p. digital-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Investigation of slag corrosion by fluid dynamics calculations

    Vollmann, S., Harmuth, H. & Gruber, D., 2009, UNITECR ´09 - Unified International Technical Conference on Refractories. p. 25-25

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Investigation of the influence of fluid flow on slag corrosion of refractories by CFD calculations

    Vollmann, S., Harmuth, H. & Buchberger, B., 2009, Proceedings 52th International Colloquium on Refractories, Aachen, Germany. p. 102-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Investigation of the melting behaviour of mould powders

    Kölbl, N., Marschall, I. & Harmuth, H., 2009, Molten 2009, Proceedings of the Viii International Conference on Molten Slags, Fluxes and Salts. p. 1031-1040

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Preparation of β-sialon bonded Al2O3-refractories in different atmospheres

    Pichlbauer, S., Harmuth, H., Lenčéš, Z., Šajgalîk, P. & Petrušková, V., 2009, ECERS - 11th International Conference and Exhibition of the European Ceramic Society. p. 179-CD

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    RESONANT FREQUENCY AND DAMPING ANALYSIS OF REFRACTORIES WITH AND WITHOUT REDUCED BRITTLENESS

    Manhart, C. & Harmuth, H., 2009, Refractories in a Shifting Globalized World. p. 14-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Simulation of refractories resonance frequency

    Gruber, D., Auer, T. & Harmuth, H., 2009, UNITECR'09, 11th Biannial Worldwide Congress. p. 27-dig.-CD

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Uniaxial and biaxial fracture behaviour of refractory materials

    Tschegg, E., Fendt, K. T., Manhart, C. & Harmuth, H., 2009, In: Engineering Fracture Mechanics. 76, p. 2249-2259

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Untersuchungen zur Anwendung der Dämpfung von Resonanzfrequenzen zur Bewertung der Alkali-Kieselsäurereaktion

    Fischböck, E. & Harmuth, H., 2009, 17. Internationale Baustofftagung IBAUSIL 23.-25.9.2009, Weimar. p. 2-0277-2-0281

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. 2008
  25. Published

    Characterisation of the melting behaviour of mould powders

    Marschall, I., Kölbl, N. & Harmuth, H., 2008, 6th European Conference on Continuous Casting 2008. p. 17-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Corrosion of magnesia chromite refractories in the RH-degasser

    Melcher, F., Reiter, V. & Harmuth, H., 2008, 51st International colloquium on refractories. p. 121-124

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Durability of Brick Lined Steel Ladles from a Mechanical point of View

    Gruber, D. & Harmuth, H., 2008, In: Steel research international. p. 913-917

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Hot stage microscopy for in situ observations of the melting and crystallisation behaviour of mould powders

    Kölbl, N. & Harmuth, H., 2008, Scanmet III 3rd International Conference on Process Development in Iron and Steelmaking. p. 73-81

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Identifikation und Beurteilung der Alkali-Gesteinskörnungs-Reaktion

    Harmuth, H. & Fischböck, E. K., 2008, In: FSV aktuell : Mitteilungen der Österreichischen Forschungsgemeinschaft Straße und Verkehr (FSV). März 08, p. 3-4

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Influence of an irreversible expansion of a teeming ladle lining on its thermo-mechanical behaviour

    Gruber, D., Auer, T., Harmuth, H. & Buchebner, G., 2008, Refractories in Metallurgy, 51st International Colloquium on Refractories. p. 73-75

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Investigation of Slag Rim Growth in the Continuous Casting Process

    Marschall, I. & Harmuth, H., 2008, Scanmet III 3rd International Conference on Process Development in Iron and Steelmaking Volume 2. p. 419-425

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Mechanisms to reduce cracking in interior plasters attached to cement bonded permanent shuttering panels

    Kirschner, A. & Harmuth, H., 2008, In: Construction & building materials (Construction and building materials). 22, p. 99-105

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Microstructal and thermochemical analysis of spinel castables used in steel ladles

    Melcher, F., Harmuth, H. & Reiter, V., 2008, In: Interceram. p. 257-260 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Microstructural and thermochemical analysis of alumina spinel castables used in steel ladles

    Melcher, F., Harmuth, H. & Reiter, V., 2008, XVI International Conference on Refractories Proceedings. p. 206-212

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Microstructural and Thermochemical Analysis of Spinel Castables Used in Steel ladles

    Melcher, F., Harmuth, H. & Reiter, V., 2008, In: Interceram. p. 257-260

    Research output: Contribution to journal › Article › Research › peer-review

  36. 2007
  37. Published

    Charakterisierung der Produktgleichmäßigkeit am Beispiel der Frühfestigkeit von Zement

    Schnedl, G. & Harmuth, H., 2007, In: Cement, lime, gypsum = Zement, Kalk, Gips : ZKG international. 12, p. 96-103

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Development of a device and method for fractographic investigations of refractories

    Manhart, C. & Harmuth, H., 2007, Unified International technical Conference on Refractories UNITECR'07. p. 494-497

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Die Verschleißfutterzustellung des "Franzisci-Hochofens" in Möderbrugg (Steiermark)

    Presslinger, H., Harmuth, H. & Neuper, W., 2007, In: Res montanarum : Zeitschrift des Montanhistorischen Vereins für Österreich. p. 60-63

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Endbericht zum Bridgeprojekt " Verschleiß von Feuerfestmaterialien durch Stahlwerksschlacken"

    Melcher, F. & Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Finite Element investigation of the crack formation in the slag line of a teeming ladle

    Gruber, D., Auer, T., Harmuth, H. & Rotsch, J., 2007, Unified International technical Conference on Refractories UNITECR'07. p. 182-185

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Fracture Mechanical Characterisation of Refractories and Application for Assessment and Simulation of the Thermal Shock Behaviour

    Harmuth, H., Manhart, C., Auer, T. & Gruber, D., 2007, In: Ceramic forum international (CFI). p. E80-E86

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Identifikation von treibenden Zuschlagkomponenten bei zwei zementgebundenen Probekörpern mit besonderen Zuschlägen

    Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Investigation of Refractory/Slag Equilibria in Steel Ladles

    Melcher, F., Reiter, V. & Harmuth, H., 2007, Calphad XXXVI. p. 72-73

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Investigations of corrosionof different alumina spinel castables by ladle slags

    Melcher, F., Reiter, V., Harmuth, H., Rössler, R., Ecker, M. & Molinari, T., 2007, Unitecr '07, Unified International Technical Conference on Refractories. p. 230-233

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Microstructural assessment of alumina porcellain specimens

    Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Microstructural Investigation of four porcellain specimens

    Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Numerical analysis of the thermomechanical behaviour of an EAF roof delta piece

    Auer, T., Gruber, D. & Harmuth, H., 2007, Unified International technical Conference on Refractories UNITECR'07. p. 174-177

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Prediction of the chemical loading of refractories in a cement rotary kiln by means of process simulation

    Emler, R., Harmuth, H. & Nievoll, J., 2007, UNITECR '07 - Unified International Technical Conference on Refractories. p. 577-580

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Prediction of the chemical loading of refractories in cement rotary kilns by means of process simulation

    Emler, R. & Harmuth, H., 2007, 9th Annual GTT-Technologies Workshop. p. 8-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Thermal modelling of a 300t torpedo ladle with Finite Element Methods

    Auer, T., Gruber, D., Harmuth, H. & Zirkl, R., 2007, Thermal modelling of a 300t torpedo ladle with Finite Element Methods. p. 159-163

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Thermochemical characterisation of fayalite slags of the non-ferrous industry and refractory/slag equilibria

    Reiter, V., Melcher, F. & Harmuth, H., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  53. Published

    Thermochemical Modeling of EAF Slags and Refractory/Slag equilibria

    Reiter, V., Melcher, F., Harmuth, H. & Netzer, W., 2007, Unitecr '07, Unified International Technical Conference on Refractories. p. 170-173

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Thermo-mechanical FE-Simulation of a teeming ladle slag line

    Gruber, D., Auer, T., Harmuth, H. & Rotsch, J., 2007, STEELSIM 2007. p. 291-294

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Untersuchung der Rissbildung an 4 zementgebundenen Probekörpern mit besonderen Zuschlägen

    Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  56. Published

    Untersuchung der Rissbildung an zementgebundenen Probekörpern

    Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  57. Published

    Untersuchung eines Ansatzringes aus dem Zementrotierofen eines südamerikanischen Zementherstellers

    Harmuth, H. & Kölbl, N., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  58. Published

    Untersuchungen zur Verminderung der Rissbildungsneigung des modularen Fertigbausystems "Heraklith H-TH"

    Harmuth, H. & Fischböck, E. K., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  59. Published

    Untersuchung synthetischer Zuschläge in Hinblick auf potenziell treibende Bestandteile bei der Verwendung als Zuschlag in zementgebundenen Baustoffen

    Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  60. Published

    Untersuchung von Bohrkernen aus einer Ortbetonleitwand von der A1-Westautobahn nähe Haag Richtungsfahrbahn Wien

    Fischböck, E. K. & Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  61. Published

    Untersuchung von Grundstoffen für die Mineralfaserproduktion in Hinblick auf ihr Schmelzverhalten

    Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  62. 2006
  63. Published

    Fem based thermo-mechanical investigations of RH-snorkels

    Gruber, D., Auer, T., Harmuth, H. & Sormann, A., 30 Mar 2006, UNITECR '05 - Proceedings of the Unified International Technical Conference on Refractories: 9th Biennial Worldwide Congress on Refractories. Smith, J. D. (ed.). p. 970-974 5 p. (UNITECR '05 - Proceedings of the Unified International Technical Conference on Refractories: 9th Biennial Worldwide Congress on Refractories).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Numerical investigations of mechanical behaviour of refractories

    Auer, T., Gruber, D., Harmuth, H. & Triessnig, A., 30 Mar 2006, UNITECR '05 - Proceedings of the Unified International Technical Conference on Refractories: 9th Biennial Worldwide Congress on Refractories. Smith, J. D. (ed.). p. 985-989 5 p. (UNITECR '05 - Proceedings of the Unified International Technical Conference on Refractories: 9th Biennial Worldwide Congress on Refractories).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Thermal and thermo-mechanical modeling of a 300t torpedo ladle

    Gruber, D., Auer, T., Harmuth, H. & Zirkl, R., 30 Mar 2006, UNITECR '05 - Proceedings of the Unified International Technical Conference on Refractories: 9th Biennial Worldwide Congress on Refractories. Smith, J. D. (ed.). p. 896-899 4 p. (UNITECR '05 - Proceedings of the Unified International Technical Conference on Refractories: 9th Biennial Worldwide Congress on Refractories).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Anwendung eines stereoskopischen Verfahrens zur fraktografischen Charakterisierung von grobkeramischen Baustoffen

    Manhart, C. & Harmuth, H., 2006, In: Practical metallography = Praktische Metallographie.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Application of fluorine containing raw materials in the cement industry

    Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  68. Published

    Beurteilung von drei Feuerfeststeinen in Hinblick auf den Einsatz der Sorten im Maerzofen

    Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  69. Published

    Contributions to Refractory Fracture Mechanical and Fractographic Investigations

    Auer, T., Manhart, C. & Harmuth, H., 2006, In: RHI bulletin : the journal of refractory innovations. 1, p. 38-42 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Ermittlung der Viskosität bei 1400 °C einer Glasphasen- und Schlackenprobe (Untersuchung der Problematik der Messbarkeit)

    Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  71. Published

    Identifikation und Beurteilung der Alkali-Zuschlag-Reaktion

    Harmuth, H. & Fischböck, E. K., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  72. Published

    Identifikation und Beurteilung der Alkali-Zuschlag-Reaktion.

    Harmuth, H. & Fischböck, E. K., 2006, In: Straßenforschung. p. 5-42

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Identifikation und Beurteilung der Alkali-Zuschlag-Reaktion. Endbericht Mai 2006

    Fischböck, E. K. & Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  74. Published

    Identifikation und Beurteilung der Alkali-Zuschlag-Reaktion. Projektbericht April 2006

    Fischböck, E. K. & Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  75. Published

    Identifikation und Beurteilung der Alkali-Zuschlag-Reaktion. Projektbericht Februar 2006

    Fischböck, E. K. & Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  76. Published

    Numerical failure analysis for the refractory lining of a tundish

    Auer, T., Gruber, D. & Harmuth, H., 2006, 49th International Colloquium on Refractories. p. 194-196

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Numerical simulation of a fracture test for brittle disordered materials

    Auer, T. & Harmuth, H., 2006, Fracture of Nano and Engeneering Materials and Structures. p. 591-592

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Quarterly Report Q2– Simulation activities GHI-RRC

    Gruber, D., Auer, T., Gerer, S. & Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  79. Published

    Quarterly Report Q3– Simulation activities GHI-RRC

    Gruber, D., Auer, T., Gerer, S. & Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  80. Published

    Tätigkeitsbericht des Christian-Doppler-Labors für eigenschaftsoptimierte Baustoffe für die Laufzeit vom 01.04.1999 bis 31.03.2006

    Kirschner, A., Harmuth, H., Manhart, C., Gruber, D., Auer, T. & Marschall, I., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  81. Published

    Universitärer Forschungscluster "Sustainable Technologies in Metal Production and Processing" (STMP)

    Antrekowitsch, H., Biedermann, H., Buchmayr, B., Ebner, F., Eichlseder, W., Harmuth, H., Kepplinger, W., Kessler, F., Krieger, W., Lorber, K. & Ludwig, A., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 263-265

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Untersuchung des Verschleißes der feuerfesten Zustellung in den Düsenrohren eines Hochofens

    Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  83. Published

    Untersuchung einer Keramikprobe in Hinblick auf den Restquarzgehalt

    Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  84. Published

    Untersuchung eines als Bettasche bezeichneten Materials aus der Müllverbrennung in Hinblick auf potentiell treibende Bestandteile

    Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  85. Published

    Untersuchung eines gebrauchten und eines ungebrauchten Monoblockstopfens industrieller Fertigung in Hinblick auf die Ursache des Stopfenbruches

    Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  86. Published

    Untersuchung von LD-Schlacken in Hinblick auf treibende CaO-reiche Phasen, die die Verwendbarkeit als Baustoff einschränken

    Harmuth, H., Melcher, F. & Reiter, V., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  87. Published

    Untersuchung von zwei Keramikproben in Hinblick auf unterschiedlichen Restquarzgehalt

    Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  88. 2005
  89. Published

    FEM based thermomechanical investigations of RH-snorkels

    Gruber, D., Auer, T., Harmuth, H. & Sormann, A., 8 Nov 2005, Proceedings of the UNITECR'05. Orlando, USA, p. 970-974 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Numerical investigation of mechanical behaviour of refractories

    Auer, T., Gruber, D., Harmuth, H. & Triessnig, A., 8 Nov 2005, Proceedings of the UNITECR'05. Orlando, USA, p. 985-989 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Contributions to the Fracture Mechanical and Fractographic Investigation of Refractories

    Auer, T., Manhart, C. & Harmuth, H., 2005, In: RHI bulletin : the journal of refractory innovations. p. 38-42

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Die Entwicklung der Feuerfestindustrie im Spiegel von 150 Jahren BHM

    Harmuth, H. & Pirker, S., 2005, In: Berg- und hüttenmännische Monatshefte : BHM. p. 45-50

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Fraktografische Untersuchung zur Charakterisierung von Baustoffen mit grobkeramischer Struktur

    Manhart, C. & Harmuth, H., 2005, Fortschritte in der Metallographie, Sonderbände der Praktischen Metallographie, Band 37. p. 223-228

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  94. Published

    Mechanical and fracture mechanical characterization of building materials used for external thermal insulation composite systems

    Nilica, R. & Harmuth, H., 2005, In: Cement and concrete research. p. 1641-1645

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Thermal and Thermomechanical FE-modelling of a 300 t Torpedo Ladle

    Gruber, D., Auer, T., Harmuth, H. & Zirkl, R., 2005, Proceedings of the conference UNITECR'05. p. 896-899

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. 2004
  97. Published

    FEM simulation of the thermomechanical behaviour of the refractory lining of a blast furnace

    Gruber, D., Harmuth, H. & Andreev, K., 2004, In: Journal of materials processing technology. 155-146, p. 1539-1543

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Investigation of geopolymer binders with respect to their application for building materials

    Harmuth, H. & Kirschner, A., 2004, In: Ceramics Silikáty. 48.2004, 3, p. 117-120 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Optimisation of the lining design of a BOF converter by finite element simulations

    Gruber, D., Harmuth, H. & Andreev, K., 2004, In: Steel research international. 75, p. 451-457

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Thermo-mechanical behaviour of the refractory lining of a BOF-converter – a numerical study

    Gruber, D., Andreev, K., Harmuth, H. & Presslinger, H., 2004, In: Taikabutsu = Refractories / Taikabutsu gijutsu kyōkai. 561, 10, p. 478-482

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Untersuchungen zur Schadensbildung an Wärmedämmverbundsystem

    Harmuth, H. & Nilica, R., 2004, 11 p. Institut für Gesteinshüttenkunde

    Research output: Other contribution › Research

  102. 2003
  103. Published

    Untersuchung des thermomechanischen Verhaltens der RH-Anlage Donawitz mit der Methode der Finiten Elemente

    Gruber, D., Andreev, K. & Harmuth, H., 2003, GHC 2003. Montanuniversität Leoben, Institut für Gesteinshüttenkunde, p. 33-43

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 Next
View graph of relations

Contact

Phone: 3200

Latest Research Output

View more (295)