Harald Harmuth

101 - 200 out of 295Page size: 100

Research output

  1. 2015
  2. Published

    Growth and shrinkage of particles in slags

    Gamsjäger, E., Kircher, V. & Harmuth, H. (Co-editor), 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  3. Published

    HIGH TEMPERATURE MICROSCOPIC INVESTIGATIONS IN THE FIELD OF CERAMICS – AN OVERVIEW

    Kircher, V., Kölbl, N., Marschall, I. & Harmuth, H., 2015, Mitteilungen der Österreichischen Mineralogischen Gesellschaft. Ö. M. G. (ed.). Wien: Eigenverlag, Vol. 161. p. 59 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  4. Published

    INFLUENCE OF CREEP ON THE THERMOMECHANICAL BEHAVIOR OF A RH-SNORKEL

    Jin, S., Harmuth, H. (Co-editor), Gruber, D. (Co-editor) & Roessler, R. (Co-editor), 2015, UNITERC 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Influence of specimen shape and the specimen/pressure plate interface on the cold crushing strength

    Gruber, D., Harmuth, H., Urbanek, G. & Sharma, V., 2015, UNITECR 2015. 14th Biennial Worldwide Congress (ed.). Wien, 5 p. 96

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    In situ observation of slag crystallization

    Kölbl, N., Harmuth, H. & Kircher, V., 2015, Mitteilungen der Österreichischen Mineralogischen Gesellschaft. Österreichische Mineralogische Gesellschaft (ed.). Wien: Eigenverlag, Vol. 161. p. 64 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  7. Published

    Interaction steel/slag/submerged entry nozzle and its impact on refractory wear - thermochemical process simulation

    Harmuth, H. & Xia, G., 2015, In: ISIJ international. 55, 4, p. 775-780 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Investigation of Magnesia Chromite Brick Wear Phenomena - Post Mortem Analysis From a Lead Recycling Furnace

    Gregurek, D., Majcenovic, C., Reinharter, K., Reiter, V., Wenzl, C., Spanring, A. & Harmuth, H., 2015, In: RHI bulletin : the journal of refractory innovations. 2/2015, p. 24-28 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Investigation of refractories for the bottom casting of special steel grades / Untersuchung von Feuerfeststoffen für den steigenden Guss von Spezialstählen

    Auer, T., Harmuth, H. & Löcker, C., 2015. 1 p.

    Research output: Contribution to conference › Paper › peer-review

  10. Published

    Nonoxides in ordinary refractory ceramics - phases, compositions and analysis

    Atzenhofer, C., Gschiel, S. & Harmuth, H., 2015, Mitteilungen der Österreichischen Mineralogischen Gesellschaft. Österreichische Mineralogische Gesellschaft (ed.). Wien: Eigenverlag, Vol. 161. p. 17 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  11. Published

    Phase formation in mould powders and mould slags during service

    Marschall, I. & Harmuth, H., 2015, Mitteilung der Österreichischen Mineralogischen Gesellschaft. Österreichische Mineralogische Gesellschaft (ed.). Wien: Eigenverlag, Vol. 161. p. 83 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  12. Published

    Phase formation in mould powders and mould slags during service

    Marschall, I. & Harmuth, H., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  13. Published

    Premature wear in the hearth of a blast furnance and its diminution by the application of titanium dioxide

    Fünders, D., Harmuth, H. & Pötschke, J., 2015, UNITECR 2015. 14th Biennial Worldwide Congress (ed.). Wien, 3 p. 62

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    TENSILE AND COMPRESSIVE CREEP TESTING OF REFRACTORIES AT SERVICE RELATED LOADS

    Sidi Mammar, A., Jin, S., Harmuth, H. & Gruber, D., 2015, UNITERC 2015. 14th Biennial Worldwide Congress (ed.). 1 p. 186

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Toward CFD Modeling of Slag Entertainment in Gas Stirred Ladles

    Huang, A., Harmuth, H., Doletschek, M., Vollmann, S. & Feng, X., 2015, In: Steel research international. 86, 12, p. 1447-1454 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Wear of magnesia bricks in the permanent lining of a ladle tank degassing unit

    Harmuth, H., Auer, T. & Bertignol, M., 2015, UNITECR 2015. 14th Biennial Worldwide Congress (ed.). Wien, 3 p. 90

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. 2014
  18. Published

    Change of mold slag composition during slab casting of steel with high Al content

    Harmuth, H. & Xia, G., 24 Oct 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, 11, p. 447-453

    Research output: Contribution to journal › Article › Research

  19. Published

    Thermomechanical behavior of steel ladle linings and the influence of insulations

    Gruber, D. & Harmuth, H., 1 Apr 2014, In: Steel research international. 85, 4, p. 512-518 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    A laser irradiation disc test for fracture testing of refractory fine ceramics

    Gruber, D. & Harmuth, H., 2014, In: Journal of the European Ceramic Society. 34, p. 4021-4029

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Change of mold slag composition during slab casting of steel with high Al content

    Harmuth, H. & Xia, G., 2014, 8th European Continuous Casting Conference. p. 952-961

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Compressive creep testing of refractories at elevated loads-Device, material law and evaluation techniques

    Jin, S., Harmuth, H. & Gruber, D., 2014, In: Journal of the European Ceramic Society. 34, p. 4037-4042

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Creep testing of refractories at service related load levels and application for material simulation

    Jin, S., Harmuth, H. & Gruber, D., 2014, Advances in Science and Technology. p. 221-225

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Determination of Young's modulus, fracture energy and tensile strength of refractories by inverse estimation of a wedge splitting procedure

    Jin, S., Gruber, D. & Harmuth, H., 2014, In: Engineering Fracture Mechanics. 116, p. 228-236

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Fractographic and Fracture Mechanical Invstigations of Refractories under Different Loading Conditions

    Harmuth, H. & Tschegg, E. K., 2014, In: China's refractories. 23, p. 19-23

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Impact of an increase of Al2O3, TiO2 and ZrO2 on mold slag properties

    Kircher, V., Marschall, I., Kölbl, N. & Harmuth, H., 2014, Proceedings - 8th European Continuous Casting Conference. p. 1050-1059

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Mathematical Modelling of Slag Entrainment in a Gas Stirred Ladle by LES

    Huang, A., Vollmann, S. & Harmuth, H., 2014, 10th India International Refractories Congress - IREFCON14. p. 200-203

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Optimisation of monolithic lining concepts of channel induction furnace

    Jin, S., Gruber, D., Harmuth, H., Soudier, J., Meunier, P. & lemaistre, H., 2014, In: International journal of cast metals research. 27, 6, p. 336 - 340

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Refractory Corrosion by Dissolution in Slags - Challenges and Trends of Present Fundamental Research

    Harmuth, H. & Vollmann, S., 2014, In: Iron & [and] steel review. 58, 4, p. 157 - 170

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Simulation of refractory fracture as a tool for advanced material testing

    Harmuth, H., Gruber, D. & Jin, S., 2014, Advances in Science and Technology . Vol. 92. p. 232-241

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Steel ladle linings – key issues regarding thermomechanical behaviour

    Gruber, D. & Harmuth, H., 2014, In: RHI bulletin : the journal of refractory innovations. p. 19-23

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Thermochemical wear of refractory linings associated to gas firing in metallurgical plants

    Rieger, J., Drozd-Rys, M., Weiß, C. & Harmuth, H., 2014, In: Steel research international. 85, p. 527-536

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Thermomechanical Behaviour of Steel Ladle Linings and the Influence of Insulations

    Gruber, D. & Harmuth, H., 2014, In: Steel research international. 85, p. 512-518

    Research output: Contribution to journal › Article › Research › peer-review

  34. 2013
  35. Published

    The mechanical fracture characterization of non-linear flexible ceramics using digital image correlation

    Belrhiti, Y., Pop, I. O., Doumalin, P., Dupre, J. C., Auer, T., Gruber, D., Harmuth, H., Huger, M. & Chotard, T., 1 Jan 2013, p. 3587-3595. 9 p.

    Research output: Contribution to conference › Paper › peer-review

  36. Published

    A Glance on Turbulence Modelling in Simulating Bubble Stirred Ladle Flow

    Pirker, S., König, B., Puttinger, S., Doletschek, M. & Harmuth, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 472-474

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Investigation of Continuous Casting Slag Films Sampled on Site and Comparison with Laboratory Results

    Marschall, I., Kölbl, N., Harmuth, H. & Xia, G., 2013, In: Journal for manufacturing science & production. 13, p. 103-114

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Main Mechanisms of SEN Slag Band Corrosion as Observed by Post Mortem Investigations

    Harmuth, H., Kircher, V., Kölbl, N., Antczak, M. & Xia, G., 2013, Proceedings of the Unified International Technical Conference on Refractories: UNITECR 2013. p. 000730-000735

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Marangoni Convection as a Contribution to Refractory Corrosion - CFD Simulation and Analytical Approaches

    Vollmann, S. & Harmuth, H., 2013, Marangoni Convection as a Contribution to Refractory Corrosion - CFD Simulation and Analytical Approaches. p. 000781-000786

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Simulation of the steel ladle preheating process

    Drozd-Rys, M., Harmuth, H. & Rössler, R., 2013, Simulation of the steel ladle preheating process. p. 764-769

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Tensile behaviour of magnesia-spinel refractories: Comparison of tensile and wedge splitting tests

    Grasset-Bourdel, R., Alzina, A., Huger, M., Chotard, T., Obenaus-Emler, R., Gruber, D. & Harmuth, H., 2013, In: Journal of the European Ceramic Society. 33, p. 913-923

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Thermochemischer Angriff von Rauchgaskomponenten auf die Feuerfestausmauerung und den Stahlmantel metallurgischer Anlagen

    Rieger, J., Drozd-Rys, M., Weiß, C. & Harmuth, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 466-467

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Thermomechanical Behaviour of Steel Ladle Linings and the Influence of Insulations

    Gruber, D. & Harmuth, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 470-471

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    The Role of Turbulence Modelling in Picturing Gas Stirred Steel Ladle Flow

    Doletschek, M., Pirker, S. & Harmuth, H., 2013, The Role of Turbulence Modelling in Picturing Gas Stirred Steel Ladle Flow. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Towards Modelling of Slag Entrainment in Gas Stirred Ladles by LES

    Huang, A., Vollmann, S. & Harmuth, H., 2013, Towards Modelling of Slag Entrainment in Gas Stirred Ladles by LES. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. 2012
  47. Published

    CFD Simulation of Mass Transfer Coefficients Relevant for Refractory Wear

    Vollmann, S. & Harmuth, H., 2012, In: Interceram / Refractories manual. p. 19-21

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Comparison of High Temperature Methods for the Investigation of Melting and Crystallisation Behaviour of Mould Powders

    Kölbl, N., Marschall, I., Harmuth, H., Buchberger, B. & Reiter, J., 2012, FRAY INTERNATIONAL SYMPOSIUM. p. 381-394

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  49. Published

    Corrosion mechanisms of SEN slagband materials

    Harmuth, H., Kölbl, N., Rollinger, B. & Xia, G., 2012, Proceedings of the 6th international symposium on refractories. p. 477-480

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    For an Educational and Industrial Partnership in a Coopetitive World: FIRE

    Rigaud, M., Zhou, N. & Harmuth, H., 2012, Proceedings of the 6th international symposium on refractories. p. 61-63

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Fractographic and fracture mechanical investigations of refractories under different loading conditions

    Harmuth, H. & Tschegg, E. K., 2012, Proceedings of the 6th international symposium on refractories. p. 485-488

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Influence of thermal damage occurrence at microstructural scale on the thermomechanical behaviour of magnesia-spinel refractories

    Grasset-Bourdel, R., Alzina, A., Huger, M., Chotard, T., Gruber, D. & Harmuth, H., 2012, In: Journal of the European Ceramic Society. 32, p. 989-999

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Investigation of continuous casting slag films sampled on site and comparison with laboratory results

    Marschall, I., Kölbl, N., Harmuth, H. & Xia, G., 2012, Ninth International Conference on Molten Slags, Fluxes and Salts (Molten 12). p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Investigation of MgALON formation under different conditions and refractory application

    Gschiel, S., Harmuth, H., Lences, Z., Sajgalik, P. & Ye, G., 2012, Proceedings of the 6th international symposium on refractories. p. 489-492

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Microstructure of solidified mold slag and comparison with laboratory specimens

    Marschall, I., Kölbl, N., Harmuth, H. & Xia, G., 2012, Fray International Symposium. Vol. 2. p. 213-224

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Preliminary investigations of the production of MgAlON bonded refractories

    Pichlbauer, S., Harmuth, H., Lenčéš, Z. & Šajgalîk, P., 2012, In: Journal of the European Ceramic Society. 32, 9, p. 2013-2018

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Production of MgAlON Bonded Alumina Refractories

    Gschiel, S., Harmuth, H., Lenčéš, Z. & Šajgalîk, P., 2012, In: Interceram / Refractories manual. 1, p. 48-51

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    SIMULATION OF MOULDING – INFLUENCING FACTORS AND RESULTS FOR COLLECTOR NOZZLES

    Gruber, D., Harmuth, H. & Michelitsch, A., 2012, Proceedings of International Colloquium on Refractories . p. 112-115

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Thermomechanical Modelling of a Channel Induction Furnace

    Jin, S., Gruber, D., Harmuth, H., Soudier, J., Meunier, P. & Lemaistre, H., 2012, Proceedings of ALAFAR Congress 2012. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Thermo-Mechanical Modelling of Steel Ladle Process Cycles

    Jin, S., Auer, T., Gruber, D., Harmuth, H., Fréchette, M. H. & Li, Y., 2012, In: Interceram / Refractories manual. p. 37-41

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Thermomechanical Steel Ladle Simulation Including a Mohr-Coulomb Plasticity Failure Model

    Jin, S., Gruber, D., Harmuth, H. & Fréchette, M.-H., 2012, In: RHI bulletin : the journal of refractory innovations. 1, p. 39-43

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Zum Gedenken an Felix Trojer

    Harmuth, H., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 459-467

    Research output: Contribution to journal › Article › Research › peer-review

  63. 2011
  64. Published

    Classification of thermomechnical impact factors and prediction model for ladle preheating

    Jin, S., Harmuth, H., Gruber, D., Auer, T. & Li, Y., 2011, In: Journal of Wuhan University of Technology. 34, 1, p. 28-31

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Corrosion Mechanisms of Refractory Materials Used in Secondary Metallurgy

    Melcher, F. & Harmuth, H., 2011, In: Refractories worldforum. 3, p. 99-104

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Corrosive wear of refractories in steel ladles - Part I: Fundamentals

    Harmuth, H., Vollmann, S. & Rössler, R., 2011, Refractories-Technology to Sustain the Global Environment. p. 74-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Corrosive wear of refractories in steel ladles - Part II: Influence of Fluid Flow

    Vollmann, S., Harmuth, H. & Kronthaler, A., 2011, Refractories-Technology to Sustain the Global Environment. p. 75-75

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Evaluation of the Drucker-Prager parameters at elevated temperatures of two refractories

    Dahlem, E., Gruber, D., Auer, T., Harmuth, H., Huger, M. & Chotard, T., 2011, Evaluation of the Drucker-Prager parameters at elevated temperatures of two refractories. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Evaluation of the Drucker-Prager Parameters (Cohesion and Friction Angle) at Elevated Temperature for two Refractories

    Dahlem, E., Gruber, D., Auer, T., Harmuth, H., Huger, M. & Chotard, T., 2011, Refractories-Technology to Sustain the Global Environment. p. 93-93

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Investigation of mold powder crystallization – evaluation and interpretation of measurements from laboratory and production site

    Harmuth, H., Kölbl, N., Marschall, I. & Brandl, W., 2011, Investigation of mold powder crystallization – evaluation and interpretation of measurements from laboratory and production site. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Melt corrosion of refractories in the nonferrous industry and the electric arc furnace: A thermochemical approach

    Reiter, V. & Harmuth, H., 2011, In: Pure and Applied Chemistry. p. 1093-1104

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Micromechanical modelling of magnesia-spinel refractories: from thermal damage to damaging elastic behaviour

    Grasset-Bourdel, R., Alzina, A., Huger, M., Chotard, T., Gruber, D. & Harmuth, H., 2011, Micromechanical modelling of magnesia-spinel refractories: from thermal damage to damaging elastic behaviour. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Modélisation micro-mécanique de réfractaires magnésie-spinelle: de l'endommagement dû au différentiel de dilatation pendant l'étape de refroidissement au comportement élastique endommageable en traction

    Grasset-Bourdel, R., Alzina, A., Huger, M., Chotard, T., Gruber, D. & Harmuth, H., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  74. Published

    Naturwissenschaftliche Untersuchungsergebnisse an Gebrauchskeramiken vom mittelbronzezeitlichen Arbeits- und Siedlungsplatz Schlosser/KG Schwarzenbach/OG Trieben

    Presslinger, H., Eibner, C. & Harmuth, H., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. p. 28-33

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    New methods for the determination of cohesion and friction angle of refractories at elevated temperatures

    Dahlem, E., Gruber, D., Auer, T., Harmuth, H., Huger, M. & Chotard, T., 2011, In: Interceram. p. 129-134

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Optimisation d'une géométrie d'éprouvette pour l'évaluation à haute température des paramétres de Drucker-Prager sur des matériaux réfractaires

    Dahlem, E., Gruber, D., Auer, T., Harmuth, H., Huger, M. & Chotard, T., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  77. Published

    Optimization of 3D RVE for anisotropy index reduction in modelling thermoelastic properties of two-phase composites using a periodic homogenisation method

    Grasset-Bourdel, R., Alzina, A., Tessier-Doyen, N., Huger, M., Chotard, T., Schmitt, N., Gruber, D. & Harmuth, H., 2011, In: Computational materials science. 50, p. 3136-3144

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Simulation of the Thermomechanical Behaviour of Magnesia-Spinel Refractories

    Grasset-Bourdel, R., Alzina, A., Huger, M., Chotard, T., Gruber, D. & Harmuth, H., 2011, Refractories-Technology to Sustain the Global Environment. p. 111-111

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    Single Hot Thermocouple Technique for the Characterization of the Crystallization Behavior of Transparent or Translucent Liquids

    Kölbl, N., Marschall, I. & Harmuth, H., 2011, In: Journal of materials science. 46, p. 6248-6254

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    The fracture resistance of refractories

    Bradt, R. C. & Harmuth, H., 2011, In: Refractories worldforum. 3, p. 129-135

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Thermochemical and Fluid-Dynamical Investigations of Refractory Wear by Ladle Slags

    Harmuth, H. & Vollmann, S., 2011, In: Interceram. p. 88-90

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Thermo-mechanical Modeling of a Complete Steel Ladle Process

    Jin, S., Auer, T., Gruber, D., Harmuth, H., Fréchette, M. H. & Li, Y., 2011, Refractories-Technology to Sustain the Global Environment. p. 10-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Thermo-mechanical simulation of a steel ladle process cycle with special emphasis on the preheating process

    Auer, T., Gruber, D., Harmuth, H., Jin, S. & Kronthaler, A., 2011, Refractories for Industrials. p. 39-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. 2010
  85. Published

    Application of Electric Voltages for Improved Protection of MgO Refractory Material

    Sauerbrey, R., Mori, G., Majcenovic, C. & Harmuth, H., 2010, In: Refractories worldforum. 2, p. 105-110

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Characterisation of the fracture path in ‘flexible’ refractories

    Harmuth, H., 2010, Refractories: recent developments in materials, production and use : selected papers from the 12th International Ceramics Congress, part of CIMTEC 2010-12th International Ceramics Congress and 5th Forum on New Materials, Montecatini Terme, Italy, June 6 - 11, 2010 ; part I including Symposium CL . p. 30-36 (Advances in science and technology; vol. 70).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    Comparison of the slag rim formation of two different mould powders

    Marschall, I., Kölbl, N. & Harmuth, H., 2010, Proceedings of the International Conference on Materials Science & Technology (MS&T'10) . p. 1591-1600

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Computational fluid dynamics simulations of mass transfer coefficients in gas purged steel ladles.

    Vollmann, S. & Harmuth, H., 2010, Computational fluid dynamics simulations of mass transfer coefficients in gas purged steel ladles.. p. 441-451

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Corrosive mass transfer in steel ladles.

    Vollmann, S. & Harmuth, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  90. Published

    Development of a Microstructural Methodology to Establish Structur/Property Relations of Refractories and First Results for Magnesia Spinel Materials

    Grasset-Bourdel, R., Gruber, D., Harmuth, H., Huger, M., Emler, R. & Chotard, T., 2010, Proceedings of the 49th Conference of Metallurgists; Advances in Refractories V. p. 425-440

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Die Single Hot Thermocouple Technique zur Charakterisierung des Kristallisationsverhaltens transparenter Schmelzen

    Kölbl, N., Marschall, I. & Harmuth, H., 2010, Stranggießen. p. 81-86

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    "Flexibility" of refractories - fracture mechanical and microscopic investigations

    Harmuth, H., 2010, Proceedings of the International Scientific Conference Refractories, Furnaces and Thermal Insulations. p. 36-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Investigation of Refractory Brittleness by Fracture Mechanical and Fractographic Methods

    Harmuth, H. & Bradt, R. C., 2010, In: Interceram / Refractories manual. p. 6-10

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Investigation of Refractory Corrosion of a Gas-stirred Steel Ladle by Simulation.

    Vollmann, S. & Harmuth, H., 2010, 12th International Ceramics Congress Part I. p. 199-204

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Investigation of Refractory Corrosion of a Gas-stirred Steel Ladle by Simulation.

    Vollmann, S. & Harmuth, H., 2010, Refractories: recent developments in materials, production and use : selected papers from the 12th International Ceramics Congress, part of CIMTEC 2010-12th International Ceramics Congress and 5th Forum on New Materials, Montecatini Terme, Italy, June 6 - 11, 2010 ; part I including Symposium CL . p. 199-204 (Advances in science and technology; vol. 70).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Investigation of the rotary slagging test by computational fluid dynamics calculations

    Vollmann, S. & Harmuth, H., 2010, In: Journal of the Technical Association of Refractories. 30, p. 10-18

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Melt corrosion of refractories in the non-ferrous industry and the electric arc furnace: A thermochemical approach

    Reiter, V. & Harmuth, H., 2010, 14th International Symposium on Solubility Phenomena ISSP 2010. p. 34-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Microstructural and thermochemical analysis of spinel castables used in steel ladles

    Melcher, F. & Harmuth, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  99. Published

    Modélisation des propriétés d'élasticité de matériaux réfractaires modéles par homogénéisation périodique

    Grasset-Bourdel, R., Gruber, D., Harmuth, H., Schmitt, N., Alzina, A., Huger, M. & Chotard, T., 2010, Modélisation des propriétés d'élasticité de matériaux réfractaires modéles par homogénéisation périodique. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    New methode to Determine the Cohesion and the Friction Angle of Refractory Materials ar Room Temperature and at Elevated Temperature

    Dahlem, E., Gruber, D., Auer, T., Harmuth, H., Huger, M. & Chotard, T., 2010, Proceedings of the 49th Conference of Metallurgists; Advances in Refractories V. p. 497-504

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Optimisation d’une géométrie d’éprouvette pour essai sous sollicitation combinée compression-cisaillement de matériaux réfractaires

    Dahlem, E., Gruber, D., Auer, T., Harmuth, H., Huger, M. & Chotard, T., 2010, Materiaux 2010. p. 97-99

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Predicition of volatile recirculation in cement clinker burning systems by means of process simulation

    Emler, R. & Harmuth, H., 2010, 14th International Symposium on Solubility Phenomena ISSP 2010. p. 35-35

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Propriétés thermomécaniques de réfractaires magnésie/spinelle modèles

    Grasset-Bourdel, R., Emler, R., Gruber, D., Harmuth, H., Huger, M. & Chotard, T., 2010, Propriétés thermomécaniques de réfractaires magnésie/spinelle modèles. p. 100-102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    Relevance of numerical simulation for refractory corrosion in steel industry

    Harmuth, H., Vollmann, S., Melcher, F., Gruber, D. & Majcenovic, C., 2010, Advances in Refractories V, 5th International Symposium, The Michel Rigaud Symposium. p. 453-463

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. Published

    Simulation of moulding of refractory bricks

    Gruber, D. & Harmuth, H., 2010, Refractories: recent developments in materials, production and use : selected papers from the 12th International Ceramics Congress, part of CIMTEC 2010-12th International Ceramics Congress and 5th Forum on New Materials, Montecatini Terme, Italy, June 6 - 11, 2010 ; part I including Symposium CL . p. 167-172 (Advances in science and technology; vol. 70).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  106. Published

    Simulation of moulding of Refractory bricks

    Gruber, D. & Harmuth, H., 2010, CIMTEC, 12th International Ceramics Congress Part I. p. 167-172

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 Next
View graph of relations

Contact

Phone: 3200

Latest Research Output

View more (295)