Florian Arbeiter

101 - 178 out of 178Page size: 100

Research output

  1. 2018
  2. Published

    Material selection, testing and validation of additively manufactured components

    Wiener, J., Arbeiter, F., Spörk, M., Gosch, A. & Pinter, G. G., 9 May 2018.

    Research output: Contribution to conference › Paper › peer-review

  3. Published

    Application of J-integral methods to tough pipe materials

    Gosch, A., Arbeiter, F., Berer, M., Wiener, J., Frank, A. & Pinter, G. G., 7 May 2018.

    Research output: Contribution to conference › Paper › peer-review

  4. Published

    Fracture mechanic principles for multi-layer pipe-wall design

    Arbeiter, F., Gosch, A., Wiener, J., Frank, A. & Pinter, G. G., 7 May 2018, p. 1. 4 p.

    Research output: Contribution to conference › Paper › peer-review

  5. Published

    Anforderungen an die Aufbereitung von Polyamid-Altpulver zur Wiederverwendung im SLS Prozess

    Berer, M., Schrank, T., Hendlich, M., Meier, G., Arbeiter, F., Lackner, J. & Kraschitzer, W., 20 Apr 2018.

    Research output: Contribution to conference › Paper

  6. Published

    Strukturbauteile aus dem 3D-Drucker: begleitende Werkstoffprüfung zur Eigenschaftsoptimierung

    Arbeiter, F., Wiener, J., Spörk, M. & Pinter, G. G., 20 Apr 2018, p. 1. 4 p.

    Research output: Contribution to conference › Paper

  7. Published

    Factors influencing CRB test results

    Poduska, J., Hutař, P., Kucera, J., Frank, A., Arbeiter, F. & Náhlík, L., 11 Apr 2018, p. 105. 109 p.

    Research output: Contribution to conference › Paper

  8. Published

    Study of mixed mode crack propagation in pipe type specimen

    Slavik, O., Hutar, P., Berer, M., Gosch, A., Arbeiter, F. & Náhlík, L., 11 Apr 2018, p. 133. 138 p.

    Research output: Contribution to conference › Paper

  9. Published

    Influence of strand orientation on mechanical properties in near homogeneous FFF produced PLA parts

    Wiener, J., Arbeiter, F., Spörk, M., Gosch, A. & Pinter, G. G., 27 Mar 2018.

    Research output: Contribution to conference › Poster › Research

  10. Published

    Toughening of polymeric materials by utilizing spatial material property variations: Towards bio-inspired multi-layered materials

    Arbeiter, F., Wiener, J., Gosch, A., Pinter, G. G. & Kolednik, O., 25 Mar 2018, p. 1. 4 p.

    Research output: Contribution to conference › Paper

  11. Published

    Influence of crosslinker and water on cyclic properties of carboxylated nitrile butadiene rubber (XNBR)

    Fleischmann, D. D., Arbeiter, F., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 12 Mar 2018, In: Polymer Testing. 67.2018, May, p. 309-321 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Fracture mechanical characterization and lifetime estimation of near-homogeneous components produced by fused filament fabrication

    Arbeiter, F., Spoerk, M., Wiener, J., Gosch, A. & Pinter, G., 5 Jan 2018, In: Polymer Testing. 66.2018, April, p. 105-113 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Influence of crosslinker and water on mechanical properties of carboxylated nitrile butadiene rubber (XNBR)

    Fleischmann, D. D., Ayalur-Karunakaran, S., Arbeiter, F., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 5 Jan 2018, In: Polymer Testing. 66.2018, April, p. 24-31 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Biomimetic Design Concepts for the Pipe Architecture of Tomorrow

    Pinter, G. G., Arbeiter, F., Wiener, J., Frank, A. & Kolednik, O., 2018, Proceedings Plastics Pipes XIX. 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Control of Material Behavior and Media Resistance of Carboxylated Nitrile Butadiene Rubber (XNBR)

    Fleischmann, D. D., Schlögl, S., Arbeiter, F. & Kern, W., 2018.

    Research output: Contribution to conference › Poster › Research

  16. Published

    Determination of the Slow Crack Growth Resistance of PA12 Pipe Grades

    Messiha, M., Frank, A., Berger, I. J., Heimink, J., van Laak, H., Arbeiter, F. & Pinter, G. G., 2018, Proceedings Plastics Pipes XIX. 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Fracture mechanical characterization of non-virgin pipe materials

    Frank, A., Berger, I. J., Koch, T., Arbeiter, F. & Pinter, G. G., 2018, Proceedings ANTEC 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Mode III fatigue in technical thermoplastics

    Gosch, A., Berer, M., Dlhy, P., Hutar, P., Arbeiter, F. & Pinter, G. G., 2018.

    Research output: Contribution to conference › Poster › Research

  19. Published

    Slow Crack Growth Resistance of Non-Vorgin Polymers

    Frank, A., Berger, I. J., Messiha, M., Arbeiter, F., Koch, T. & Pinter, G. G., 2018, Procedings Plastics Pipes XIX. 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. 2017
  21. Published

    Optimization of Mechanical Properties of Glass-Spheres-Filled Polypropylene Composites for Extrusion-Based Additive Manufacturing

    Spörk, M., Savandaiah, C., Arbeiter, F., Sapkota, J. & Holzer, C., 26 Dec 2017, In: Polymer Composites. 40.2019, 2, p. 638-651 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Special Binder Systems for Metal Powders in Highly Filled Filaments for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Cano Cano, S., Ecker, J., Arbeiter, F., Burkhardt, C., Hampel, S., Kukla, C. & Holzer, C., 14 Dec 2017, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  23. Published

    Special Binder Systems for the Use with Metal Powders for Highly Filled Filaments for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Kukla, C., Arbeiter, F. & Holzer, C., 14 Dec 2017, 33rd Annual Meeting of the Polymer Processing Society. Cancun, Mexico, Vol. 33. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Experimental methods to characterize the nonlinear elastic plastic fracture behaviour of polymers, as a starting point for the description of multi-layered structures

    Gosch, A., Arbeiter, F. & Pinter, G. G., 10 Sept 2017.

    Research output: Contribution to conference › Abstract

  25. Published

    Material behavior of carboxylated nitrile butadiene rubber (XNBR) in dependence on crosslinker and medium

    Fleischmann, D. D., Arbeiter, F., Schlögl, S. & Kern, W., 5 Sept 2017.

    Research output: Contribution to conference › Poster › Research

  26. E-pub ahead of print

    Shrinkage and Warpage Optimization of Expanded-Perlite-Filled Polypropylene Composites in Extrusion-Based Additive Manufacturing

    Spörk, M., Sapkota, J., Weingrill, G., Fischinger, T., Arbeiter, F. & Holzer, C., 4 Jul 2017, (E-pub ahead of print) In: Macromolecular materials and engineering. 302.2017, 10, 13 p., 1700143.

    Research output: Contribution to journal › Article › Research › peer-review

  27. E-pub ahead of print

    Parametric optimization of intra- and inter-layer strengths in parts produced by extrusion-based additive manufacturing of poly(lactic acid)

    Spörk, M., Arbeiter, F., Cajner, H., Sapkota, J. & Holzer, C., 26 Jun 2017, (E-pub ahead of print) In: Journal of Applied Polymer Science. 134.2017, 41, 15 p., 45401.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    FILLER CONTENT AND PROPERTIES OF HIGHLY FILLED FILAMENTS FOR FUSED FILAMENT FABRICATION OF MAGNETS

    Gonzalez-Gutierrez, J., Duretek, I., Arbeiter, F., Kukla, C. & Holzer, C., 9 May 2017, ANTEC® 2017. Anaheim, California, USA, 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Influence of long-term annealing on residual stress distribution and quasi-brittle failure properties of talcum reinforced pipe grade polypropylene

    Arbeiter, F., Pinter, G. & Frank, A., 9 May 2017.

    Research output: Contribution to conference › Paper › peer-review

  30. Published

    Characterization of slow crack growth resistance of polyethylene pipe grades with cyclic cracked round bar (CRB) test in correlation to strain hardening (SH) test

    Berger, I. J., Frank, A., Arbeiter, F. & Pinter, G., 8 May 2017.

    Research output: Contribution to conference › Paper › peer-review

  31. Published

    The Cyclic Cracked Round Bar Test as a new standard for accelerated material ranking of polyethylene pipe grades

    Frank, A., Berger, I. J., Arbeiter, F. & Pinter, G., 8 May 2017.

    Research output: Contribution to conference › Paper › peer-review

  32. Published

    Properties of glass filled polypropylene for Fused Filament Fabrication

    Spörk, M., Savandaiah, C., Arbeiter, F., Schuschnigg, S. & Holzer, C., May 2017.

    Research output: Contribution to conference › Paper › peer-review

  33. Published

    Fracture mechanics methods to assess the lifetime of thermoplastic pipes

    Arbeiter, F., Pinter, G., Lang, R. W. & Frank, A., 2017, Springer Series in Materials Science. Springer Berlin, Vol. 247. p. 33-54 22 p. (Springer Series in Materials Science; vol. 247).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  34. Published

    Influence of long-term annealing on residual stress distribution and quasi-brittle failure properties of talcum reinforced pipe grade polyproyplene

    Arbeiter, F. J., Pinter, G. & Frank, A., 2017, 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017. Vol. 2017-May. p. 1989-1993 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. 2016
  36. Published

    Cranial Polypropylene Implants by Fused Filament Fabrication

    Katschnig, M., Arbeiter, F., Haar, B., von Campe, G. & Holzer, C., 2 Dec 2016, In: Advanced engineering materials. 19.2017, 4, 5 p., 1600676.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Influence of molecular structure and reinforcement on fatigue behavior of tough polypropylene materials

    Arbeiter, F., Frank, A. & Pinter, G. G., 10 Oct 2016, In: Journal of Applied Polymer Science. 133.2016, 38, 16 p., 43948.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Bonding Forces in Fused Filament Fabrication

    Spörk, M., Schuschnigg, S., Holzer, C., Arbeiter, F. & Berger, G., 23 Sept 2016.

    Research output: Contribution to conference › Abstract › peer-review

  39. Published

    Fast comparison of different polymeric pipe materials: Extending the use of the cyclic CRB-Test (ISO 18489)

    Arbeiter, F., 14 Sept 2016. 1 p.

    Research output: Contribution to conference › Presentation › Research

  40. Published

    Lifetime Prediction of PE100 and PE100 RC Pipes based on Slow Crack Growth Resistance

    Frank, A., Berger, I. J., Hutař, P., Arbeiter, F. & Pinter, G., 14 Sept 2016, Proceedings of the 18th Plastic Pipes Conference. Plastics Pipes Conference Association, Vol. 18. 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    POLYPROPYLENE MULTI-LAYER-PIPES - 100 YEAR LIFETIME ASSESSMENT USING LINEAR ELASTIC FRACTURE MECHANICS

    Pappler, U., Arbeiter, F. & Pinter, G., 14 Sept 2016, Proceedings of the 18th Plastic Pipes Conference . Plastics Pipes Conference Association, Vol. 18. 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    FAST COMPARISON OF DIFFERENT POLYMERIC PIPE MATERIALS: EXTENDING THE USE OF THE CYCLIC CRBTEST (ISO 18489)

    Arbeiter, F., Pinter, G. & Frank, A., Sept 2016, Proceedings of the 18th Plastic Pipes Conference. Plastics Pipes Conference Association, Vol. 18. 10 p. 118

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. E-pub ahead of print

    Fracture toughness of high density polyethylene: Fatigue pre-cracking versus femtolaser, razor sharpening and broaching

    Salazar, A., Rodríguez, J., Arbeiter, F., Pinter, G. G. & Martínez, A. B., 13 Jul 2016, (E-pub ahead of print) In: Engineering Fracture Mechanics. 149.2015, November, p. 199-213 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Multi-layer sewer pipes: long-term performance and influence of artificial ageing

    Arbeiter, F., 21 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  45. 2015
  46. Published

    On crack propagation in the welded polyolefin pipes with and without the presence of weld beads

    Mikula, J., Hutař, P., Nezbedová, E., Lach, R., Arbeiter, F., Ševčík, M., Pinter, G., Grellmann, W. & Náhlík, L., 15 Dec 2015, In: Materials & design. 87, p. 95-104 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    The Cyclic CRB Test – A Quick Test for Assessing Long Term Fracture Behaviour of Polymers

    Pinter, G., Arbeiter, F., Berer, M., Schrittesser, B. & Frank, A., 25 Sept 2015, PPS 2015 - Book of Abstracts. p. 104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Optimization of the Long Term Performance of Pipes by Multilayer Build Ups

    Arbeiter, F., Ševčík, M., Hutař, P., Feuchter, M., Bruckmoser, K. & Pinter, G., 23 Sept 2015, PPS 2015 - Book of Abstracts. p. 134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    The Cyclic CRB Test - A Quick Test for Assessing the Long Term Fracture Behaviour of Polymers

    Pinter, G., Arbeiter, F., Berer, M., Schrittesser, B. & Frank, A., 23 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  50. Published

    Optimization of the Long Term Performance of Pipes by Multilayer Build Ups

    Arbeiter, F., Sevcik, M., Hutař, P., Feuchter, M., Bruckmoser, K. & Pinter, G., 22 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  51. Published

    Cyclic tests on cracked round bars as a quick tool to assess the long term behaviour of thermoplastics and elastomers

    Arbeiter, F., Schrittesser, B., Frank, A., Berer, M. & Pinter, G., 3 Jun 2015, In: Polymer Testing. 45, p. 83-92 10 p., 4441.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Damage propagation in reinforced pipe grade polypropylene under fatigue loads

    Arbeiter, F., Schwab, M., Pinter, G. & Frank, A., 21 May 2015.

    Research output: Contribution to conference › Poster › Research

  53. Published

    Investigation of interface properties of polypropylene multi-layer pipes via Raman-spectroscopy and X-ray scattering techniques

    Feuchter, M., Bruckmoser, K., Arbeiter, F. & Pinter, G., 21 May 2015.

    Research output: Contribution to conference › Poster › Research

  54. Published

    Beschleunigte Werkstoffqualifizierung mit dem zyklischen CRB-Test

    Frank, A., Berger, I., Arbeiter, F. & Pinter, G., Apr 2015, In: 3 R. 04-05 2015, p. 74-80

    Research output: Contribution to journal › Article › Research

  55. Published

    Linear elastic fracture mechanics: a useful tool for lifetime estimation of structures made from thermoplastic polymers

    Arbeiter, F., Berer, M. & Pinter, G., 30 Mar 2015.

    Research output: Contribution to conference › Poster › Research

  56. Published

    Evaluation of long-term properties of polymeric pipe grade materials using fatigue tests and fracture mechanics

    Arbeiter, F., 2015

    Research output: Thesis › Doctoral Thesis

  57. 2014
  58. Published

    Definition of stress intensity factor development and determination of crack growth kinetics in multi layer polypropylene pipes

    Arbeiter, F., Hutař, P., Pinter, G. & Frank, A., 17 Sept 2014.

    Research output: Contribution to conference › Presentation › Research

  59. Published

    Fracture toughness of high density polyethylene: Fatigue precracking versus femtolaser, razor sharpening and broaching

    Salazar, A., Rodriguez, J., Arbeiter, F., Pinter, G. & Martínez, A. B., 17 Sept 2014.

    Research output: Contribution to conference › Presentation › Research

  60. Published

    Untersuchungen von stumpfgeschweißten PE-Rohren mit bruchmechanischen Methoden

    Arbeiter, F., 14 Jun 2014.

    Research output: Contribution to conference › Presentation › Research

  61. Published

    Bruchmechanische Methoden zur Abschätzung der Lebensdauer von thermoplastischen Rohrwerkstoffen

    Pinter, G., Frank, A. & Arbeiter, F., 2014, Tagungsband Polymertec 2014. p. 142-145

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Characterisation of quasi-brittle fatigue crack growth in pipe grade polypropylene block copolymer

    Arbeiter, F., Pinter, G. & Frank, A., 2014, In: Polymer Testing. 37, p. 186-192

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Characterization of Crack Initiation and Slow Crack Growth Resistance of PE100 and PE100-RC pipe Grades with Cyclic Cracked Round Bar Tests

    Frank, A., Berger, I. J., Arbeiter, F. & Pinter, G., 2014, Proceedings of the 17 th Plastic Pipes Conference PPXVII. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Correlation of Fracture Mechanics Based Lifetime Prediction and Internal Pipe Pressure Tests

    Pinter, G., Frank, A., Berger, I. J. & Arbeiter, F., 2014, Proceedings of the 17 th Plastic Pipes Conference PPXVII. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Polypropylene Multi Layer Pipe Lifetime Assessment Under Realistic Loading Conditions

    Arbeiter, F., Ševčík, M., Pinter, G., Frank, A. & Hutar, P., 2014, Proceedings of the 17 th Plastic Pipes Conference PPXVII. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Stiffness based fatigue characterisation of CFRP

    Brunbauer, J., Arbeiter, F., Stelzer, S. & Pinter, G., 2014, In: Advanced materials research. p. 166-171

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Stiffness based fatigue characterisation of CFRP

    Maier, J., Arbeiter, F., Stelzer, S. & Pinter, G., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  68. Published

    The effect of soil load on fracture behaviour of three-layer polymer pipe for non-pressurised applications

    Ševčík, M., Arbeiter, F., Hutar, P., Pinter, G. & Luboš, N., 2014, Key engineering materials. Vol. 627. p. 197-200 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  69. Published

    Untersuchungen von stumpfgeschweißten PE-Rohren mit bruchmechanischen Methoden

    Arbeiter, F., Pinter, G. & Frank, A., 2014, Tagungsband Polymertec 2014. p. 175-182

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. 2013
  71. Published

    Bruchmechanik an Grenzflächen - Lebensdauervorhersagekonzepte für mehrschichtige Kunststoffkomponenten

    Arbeiter, F., 14 Nov 2013.

    Research output: Contribution to conference › Presentation › Research

  72. Published

    Comparison of fracture times of PE-HD pressure pipes and PP-Multilayer pipes using linear elastic fracture mechanics

    Arbeiter, F., 9 Sept 2013.

    Research output: Contribution to conference › Presentation › Research

  73. Published

    Bruchmechanik an Grenzflächen - Lebensdauervorhersagekonzepte für mehrschichtige Kunststoffkomponenten

    Arbeiter, F., Pinter, G., Lach, R., Grellmann, W. & Hutar, P., 2013, 22. Leobener Kunststoff-Kolloquium: Oberflächen und Grenzflächen in der Polymertechnologie. p. 228-238

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Comparison of crack growth kinetics in different polypropylene grades using linear elastic fracture mechanics

    Arbeiter, F., Pinter, G. & Frank, A., 2013, The Proceedings of The Austrian Slovenian Polymer Meeting 2013. p. 62-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Comparison of crack growth kinetics in different polypropylene grades using linear elastic fracture mechanics

    Arbeiter, F., 2013.

    Research output: Contribution to conference › Presentation › Research

  76. Published

    IMPACT OF SINGLE AND DUAL PRESSURE BUTT-WELDING PROCEDURES ON THE RELIABILITY OF PE 100 PIPE WELDS

    Arbeiter, F., Pinter, G. & Frank, A., 2013, Proceedings of Eurotec 2013.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Impact of varying between single and dual pressure butt-welding procedures for small scale pipes on short- and long-term fracture properties of PE 100 pipe welds

    Arbeiter, F., 2013.

    Research output: Contribution to conference › Presentation › Research

  78. Published

    Interface thickness determination of mineral reinforced multilayer polypropylene pipes using Raman spectroscopy

    Arbeiter, F., Bruckmoser, K. & Pinter, G., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  79. 2012
  80. Published

    Comparison of long-term-properties of polyolefin pipe grades using linear elastic fracture mechanics

    Arbeiter, F., Sept 2012.

    Research output: Contribution to conference › Presentation › Research

  81. Published

    Comparison of long-term-properties of polyolefin pipe grades using linear elastic fracture mechanics

    Arbeiter, F., Frank, A. & Pinter, G., 2012, proceedings of Plastic Pipes XVI Conference 2012. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Kunststofftechnik Leoben: Rohrexpertise in Spanien Präsentiert

    Arbeiter, F., Pinter, G., Redhead, A. & Frank, A., 2012, In: VLK-News. p. 18-18

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Lifetime prediction of multi-layer polyolefin pipes

    Arbeiter, F. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  84. Published

    Thermische und optische Untersuchungen an mit INDUCON-Verfahren gefertigten Schweißnähten

    Arbeiter, F. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  85. 2011
  86. Published

    Morphologische Charakterisierung von Stumpfschweißverbindungen in Polyethylen-Rohrleitungen

    Arbeiter, F., 2011

    Research output: Thesis › Master's Thesis

Previous 1 2 Next
View graph of relations

Contact

Phone: 2122

Curriculum vitae

Florian Arbeiter public CV

Latest Research Output

View more (178)