Journal articles

1. Shahroodi, Z, Zidar, D, Momeni, V, Arbeiter, F, Duretek, I, Krempl, N, Berger-Weber, G & Holzer, C 2025, 'Tailored Recycled Composites: Enhancing the Performance of Injection Moulded Post-Consumer Polypropylene Composites Using Box-Behnken Design', Polymer Testing, vol. 144.2025, no. March, 108743. https://doi.org/10.1016/j.polymertesting.2025.108743
2. Waly, C, Schulnig, S & Arbeiter, F 2024, 'Strain rate-dependent failure modes of material extrusion-based additively manufactured PETG: A study on crack deflection and penetration', Theoretical and Applied Fracture Mechanics, vol. 136.2025, no. April, 104834. https://doi.org/10.1016/j.tafmec.2024.104834
3. Waly, C, Höller, R, Griesser, T & Arbeiter, F 2024, 'Deformation and fracture of lithosphere-inspired polymeric multi-layer composites', Results in Engineering, vol. 24.2024, no. December, 103519. https://doi.org/10.1016/j.rineng.2024.103519
4. Messiha, M, Wiener, J, Arbeiter, F & Pinter, G 2024, 'Data-driven evaluation of the Paris’ law parameters in polyethylene pipe grades — Increasing the precision of fracture mechanical lifetime estimation', Engineering Fracture Mechanics, vol. 311.2024, no. 25 November, 110540. https://doi.org/10.1016/j.engfracmech.2024.110540
5. Shahroodi, Z, Krempl, N, Zidar, D, Mayrhofer, T, Kirschnick, U, Arbeiter, F, Duretek, I & Holzer, C 2024, 'Waste-to-Value Feasibility Study: Assessing the Viability and Quality of Incorporating Different Postindustrial Glass-Fiber Composites into Postconsumer Recycled Polypropylene', ACS Sustainable Chemistry and Engineering, vol. 12.2024, no. 33, pp. 12619-12631. https://doi.org/10.1021/acssuschemeng.4c04645
6. Bergoglio, M, Rossegger, E, Schlögl, S, Griesser, T, Waly, C, Arbeiter, F & Sangermano, M 2024, 'Multi-Material 3D Printing of Biobased Epoxy Resins', Polymers, vol. 16.2024, no. 11, 1510. https://doi.org/10.3390/polym16111510
7. Gao, X, Guo, J, Zhang, D, Li, J, Su, Y, Arbeiter, F & Li, H 2024, 'Reducing part deformation of isotactic polypropylene specimens fabricated with powder bed fusion technique through controlling crystallization behaviors', Journal of polymer science, vol. 62.2024, no. 13, pp. 3025-3037. https://doi.org/10.1002/pol.20240121
8. Arbeiter, F, Schachinger, T, Wenighofer, R, Rieß, G, Steiner, M, Micic Batka, V, Griebaum, M, Laufer, V & Galler, R 2023, 'Maßgeschneiderte Sanierungsverfahren für die Tunnelentwässerung - "DrainRepair": Teil 2: Ergebnisbericht', Berg- und hüttenmännische Monatshefte : BHM, vol. 168.2023, no. 12, pp. 566-571. https://doi.org/10.1007/s00501-023-01406-8
9. Wainstein, J, Wiener, J, Arbeiter, F & Frontini, PM 2023, 'Determination of creep crack growth kinetics of ABS via the C* approach at different temperatures', Results in Engineering, vol. 20.2023, no. December, 101481. https://doi.org/10.1016/j.rineng.2023.101481
10. Waly, C, Petersmann, S & Arbeiter, F 2023, 'Crack penetration versus deflection in extrusion-based additive manufacturing – Impact of nozzle temperature and morphology', Theoretical and Applied Fracture Mechanics, vol. 127.2023, no. October, 104032. https://doi.org/10.1016/j.tafmec.2023.104032
11. de Carvalho, WS, Marzemin, F, Belei, C, Petersmann, S, Arbeiter, F & de Traglia Amancio-Filho, S 2023, 'Statistical-based optimization of fused filament fabrication parameters for short-carbon-fiber-reinforced poly-ether-ether-ketone considering multiple loading conditions', Polymer Testing, vol. 128.2023, no. November, 108207. https://doi.org/10.1016/j.polymertesting.2023.108207
12. Wiener, J, Arbeiter, F & Pinter, GG 2023, 'Concepts towards bio-inspired multilayered polymer-composites', Procedia Structural Integrity, vol. 2023, no. 47, pp. 253-260. https://doi.org/10.1016/j.prostr.2023.07.018
13. Eder, S, Kuchler, L, Katschnig, M, Brandl, B, Wolfgang, M, Koutsamanis, I, Hentschel, L, Arbeiter, F, Roblegg, E & Spoerk, M 2023, 'Personalization of Complex Vaginal Inserts of Ethylene Vinyl Acetate via 3D-Printing', Advanced Materials Technologies, vol. 8.2023, no. 17, 2300237. https://doi.org/10.1002/admt.202300237
14. Schwaiger, M, Waly, C, Huszar, M, Oreski, G, Feuchter, M, Arbeiter, F & Resch-Fauster, K 2023, 'Bioinspired fracture toughness enhancement of a fully bio-based epoxy resin', Polymer Testing, vol. 124.2023, no. July, 108098. https://doi.org/10.1016/j.polymertesting.2023.108098
15. Trávníček, L, Poduška, J, Messiha, M, Arbeiter, F, Pinter, GG, Náhlík, L & Hutař, P 2023, 'Effect of recycled material on failure by slow crack growth in multi-layer polyethylene pipes', Engineering Fracture Mechanics, vol. 289.2023, no. 1 September, 109423. https://doi.org/10.1016/j.engfracmech.2023.109423
16. Petersmann, S, Huemer, M, Hentschel, L & Arbeiter, F 2023, 'Effects of simulated body fluid on the mechanical properties of polycarbonate polyurethane produced via material jetting', Polymer Testing, vol. 120.2023, no. March, 107977. https://doi.org/10.1016/j.polymertesting.2023.107977
17. Petersmann, S, Smith, JA, Schäfer, U & Arbeiter, F 2023, 'Material extrusion-based additive manufacturing of polyetheretherketone cranial implants: Mechanical performance and print quality', Journal of Materials Research and Technology, vol. 22.2023, no. January-February, pp. 642-657. https://doi.org/10.1016/j.jmrt.2022.11.143
18. Varsavas, SD, Riemelmoser, F, Arbeiter, F & Faller, LM 2022, 'A review of parameters affecting success of lower-limb prosthetic socket and liners and implementation of 3D printing technologies', Materials Today: Proceedings, vol. 70.2022, pp. 425-430. https://doi.org/10.1016/j.matpr.2022.09.280
19. Wiener, J, Arbeiter, F, Kolednik, O & Pinter, G 2022, 'Influence of layer architecture on fracture toughness and specimen stiffness in polymer multilayer composites', Materials and Design, vol. 219.2022, no. July, 110828. https://doi.org/10.1016/j.matdes.2022.110828
20. Messiha, M, Frank, A, Arbeiter, F & Pinter, G 2022, 'On the slow crack growth process and associated structure–property relationships in polyamide 12 grades', Journal of applied polymer science, vol. 139.2022, no. 24, 52357. https://doi.org/10.1002/app.52357
21. Hentschel, L, Petersmann, S, Gonzalez-Gutierrez, J, Kynast, F, Schäfer, U, Arbeiter, F & Holzer, C 2022, 'Parameter Optimization of the ARBURG Plastic Freeforming Process by Means of a Design of Experiments Approach', Advanced engineering materials, vol. 24.2022, 2200279. https://doi.org/10.1002/adem.202200279
22. Petersmann, S, Hentschel, L, Gonzalez-Gutierrez, J, Tödtling, M, Schäfer, U, Arbeiter, F & Üçal, M 2022, 'The Effects of Washing and Formaldehyde Sterilization on the Mechanical Performance of Poly(methyl Methacrylate) (PMMA) Parts Produced by Material Extrusion-Based Additive Manufacturing or Material Jetting', Advanced engineering materials, vol. 24.2022, 2200225. https://doi.org/10.1002/adem.202200225
23. Pletz, M & Arbeiter, FJ 2022, 'Combined Crack Initiation and Crack Growth Model for Multi-Layer Polymer Materials', Materials, vol. 15.2022, no. 9, 3273. https://doi.org/10.3390/ma15093273
24. Eder, S, Wiltschko, L, Koutsamanis, I, Afonso Urich, JA, Arbeiter, F, Roblegg, E & Spoerk, M 2022, 'Toward a new generation of vaginal pessaries via 3D-printing: Concomitant mechanical support and drug delivery', European Journal of Pharmaceutics and Biopharmaceutics, vol. 174.2022, no. May, pp. 77-89. https://doi.org/10.1016/j.ejpb.2022.04.001
25. Wiener, J, Preissegger, F, Plank, B, Arbeiter, F, Kolednik, O & Pinter, G 2022, 'Characterization methods for strain-induced damage in polypropylene', Polymer Engineering and Science, vol. 62.2022, no. 6, pp. 1959-1973. https://doi.org/10.1002/pen.25979
26. Waly, C, Petersmann, S & Arbeiter, F 2022, 'Multimaterial Extrusion-Based Additive Manufacturing of Compliant Crack Arrester: Influence of Interlayer Length, Thickness, and Applied Strain Rate', Advanced engineering materials, vol. 2022, 2101703. https://doi.org/10.1002/adem.202101703
27. Messiha, M, Frank, A, Heimink, J, Arbeiter, F & Pinter, G 2022, 'Mechanisms of rapid fracture in PA12 grades', Theoretical and Applied Fracture Mechanics, vol. 117.2022, no. February, 103145. https://doi.org/10.1016/j.tafmec.2021.103145
28. Messiha, M, Frank, A, Arbeiter, F & Pinter, G 2022, 'How hydrogen bonds influence the slow crack growth resistance of polyamide 12', Polymer, vol. 239.2022, no. 17 January, 124437. https://doi.org/10.1016/j.polymer.2021.124437
29. Arbeiter, F, Schachinger, T, Wenighofer, R, Rieß, G, Steiner, M, Schoen, A, Griebaum, M, Laufer, V & Galler, R 2021, 'Maßgeschneiderte Sanierungsverfahren für die Tunnelentwässerung – DrainRepair', Berg- und hüttenmännische Monatshefte : BHM, vol. 166.2021, no. 12, pp. 583-588. https://doi.org/10.1007/s00501-021-01173-4
30. Spoerk, M, Arbeiter, F, Koutsamanis, I, Cajner, H, Katschnig, M & Eder, S 2021, 'Personalised urethra pessaries prepared by material extrusion-based additive manufacturing', International Journal of Pharmaceutics, vol. 608.2021, no. 25 October, 121112. https://doi.org/10.1016/j.ijpharm.2021.121112
31. Messiha, M, Frank, A, Heimink, J, Arbeiter, F & Pinter, G 2021, 'Structure-Property Relationships of Polyamide 12 Grades Exposed to Rapid Crack Extension', Materials, vol. 14.2021, no. 19, 5899. https://doi.org/10.3390/ma14195899
32. Gonzalez-Gutierrez, J, Cano Cano, S, Ecker, JV, Kitzmantel, M, Arbeiter, F, Kukla, C & Holzer, C 2021, 'Bending Properties of Lightweight Copper Specimens with Different Infill Patterns Produced by Material Extrusion Additive Manufacturing, Solvent Debinding and Sintering', Applied Sciences : open access journal, vol. 11, no. 16, 7262. https://doi.org/10.3390/app11167262
33. Rueda, F, Rull, N, Quintana, C, Torres, JP, Messiah, M, Frank, A, Arbeiter, F, Frontini, PM & Pinter, G 2021, 'Modelling Failure Of Polymers: An Optimization Strategy Based on Genetic Algorithms and Instrumented Impact Tests', Journal of dynamic behavior of materials. https://doi.org/10.1007/s40870-021-00297-5
34. Gosch, A, Arbeiter, FJ, Agnelli, S, Berer, M & Baldi, F 2021, 'Size-Induced Constraint Effects on Crack Initiation and Propagation Parameters in Ductile Polymers', Materials, vol. 14.2021, no. 8, 1945. https://doi.org/10.3390/ma14081945
35. Frank, A, Messiha, M, Koch, T, Poduška, J, Hutař, P, Arbeiter, F & Pinter, G 2021, 'Correlation of the cyclic cracked round bar test and hydrostatic pressure test for unplasticized polyvinylchloride', Polymer Testing, vol. 95.2021, no. March, 107125. https://doi.org/10.1016/j.polymertesting.2021.107125
36. Wiener, J, Kaineder, H, Kolednik, O & Arbeiter, F 2021, 'Optimization of Mechanical Properties and Damage Tolerance in Polymer-Mineral Multilayer Composites', Materials, vol. 14.2021, no. 4, 725, pp. 1-19. https://doi.org/10.3390/ma14040725
37. Gosch, A, Arbeiter, F, Berer, M, Vojtek, T, Hutař, P & Pinter, GG 2020, 'Fatigue characterization of polyethylene under mixed mode I/III conditions', International Journal of Fatigue, vol. 145.2021, no. April, 106084. https://doi.org/10.1016/j.ijfatigue.2020.106084
38. Koutsamanis, I, Spoerk, M, Arbeiter, F, Eder, S & Roblegg, E 2020, 'Development of Porous Polyurethane Implants Manufactured via Hot-Melt Extrusion', Polymers, vol. 12.2020, no. 12, 2950, pp. 1-22. https://doi.org/10.3390/polym12122950
39. Gosch, A, Geier, J, Arbeiter, F, Berer, M & Pinter, GG 2020, 'Methods for automated crack length detection in fracture mechanical fatigue tests of unreinforced polymers', Procedia structural integrity / ESIS, European Structural Integrity Society, vol. 28.2020, pp. 1184-1192. https://doi.org/10.1016/j.prostr.2020.11.100
40. Arbeiter, F, Trávníček, L, Petersmann, S, Dlhý, P, Spoerk, M, Pinter, G & Hutař, P 2020, 'Damage tolerance-based methodology for fatigue lifetime estimation of a structural component produced by material extrusion-based additive manufacturing', Additive Manufacturing, vol. 36, 101730. https://doi.org/10.1016/j.addma.2020.101730
41. Messiha, M, Frank, A, Koch, T, Arbeiter, F & Pinter, G 2020, 'Effect of polyethylene and polypropylene cross-contamination on slow crack growth resistance', International journal of polymer analysis and characterization, vol. 25, no. 8, pp. 649-666. https://doi.org/10.1080/1023666X.2020.1833143
42. Arbeiter, F, Eichinger, S, Rieß, G, Schachinger, T, Boch, R, Wenighofer, R, Galler, R, Hausberger, A, Strobl, E, Stur, M, Saliger, F, Steiner, M, Dietzel, M & Pinter, G 2020, 'Optimierte Polymer-Rohrwerkstoffe für effiziente Drainagesysteme in Tunnelbauwerken—PolyDrain Teil II', Berg- und hüttenmännische Monatshefte : BHM, vol. 165.2020, no. 11, pp. 623-630. https://doi.org/10.1007/s00501-020-01045-3
43. Arbeiter, F, Petersmann, S, Wiener, J, Oesterreicher, F, Spörk, M & Pinter, GG 2020, 'Using Compliant Interlayers as Crack Arresters in 3-D-Printed Polymeric Structures', Materials Performance and Characterization, vol. 9, no. 5. https://doi.org/doi:10.1520/MPC20190201
44. Gosch, A, Arbeiter, FJ, Agnelli, S, Berer, M, Pinter, G & Baldi, F 2020, 'J-testing of polymers via the load separation criterion based ESIS TC4 procedure: Effect of the specimen size', Polymer Testing, vol. 89, no. September, 106637. https://doi.org/10.1016/j.polymertesting.2020.106637
45. Petersmann, S, Spörk-Erdely, P, Feuchter, M, Wieme, T, Arbeiter, F & Spörk, M 2020, 'Process-induced morphological features in material extrusion-based additive manufacturing of polypropylene', Additive Manufacturing, vol. 35.2020, no. October, 101384. https://doi.org/10.1016/j.addma.2020.101384
46. Petersmann, S, Spörk, M, Van De Steene, W, Üçal, M, Wiener, J, Pinter, GG & Arbeiter, F 2020, 'Mechanical properties of polymeric implant materials produced by extrusion-based additive manufacturing', Journal of the Mechanical Behavior of Biomedical Materials, vol. 104.2020, no. April, 103611. https://doi.org/10.1016/j.jmbbm.2019.103611
47. Hennen, D, Hartmann, D, Rieger, PH, Oesterreicher, A, Wiener, J, Arbeiter, F, Feuchter, M, Fröhlich, E, Pichelmayer, M, Schlögl, S & Griesser, T 2020, 'Exploiting the Carbon and Oxa Michael Addition Reaction for the Synthesis of Yne Monomers: Towards the Conversion of Acrylates to Biocompatible Building Blocks', ChemPhotoChem , vol. 4.2020, no. 7, pp. 476-480. https://doi.org/10.1002/cptc.201900199
48. Messiha, M, Gerets, B, Heimink, J, Frank, A, Arbeiter, F & Engelsing, K 2020, 'Slow crack growth resistance of modern PA-U12 grades measured by cyclic cracked round bar tests and strain hardening tests', Polymer Testing, vol. 86.2020, no. June, 106468. https://doi.org/10.1016/j.polymertesting.2020.106468
49. Tiwari, A, Wiener, J, Arbeiter, F, Pinter, G & Kolednik, O 2019, 'Application of the material inhomogeneity effect for the improvement of fracture toughness of a brittle polymer', Engineering Fracture Mechanics, vol. 224.2020, no. March, 106776. https://doi.org/10.1016/j.engfracmech.2019.106776
50. Wiener, J, Arbeiter, F, Tiwari, A, Kolednik, O & Pinter, G 2019, 'Bioinspired toughness improvement through soft interlayers in mineral reinforced polypropylene', Mechanics of materials, vol. 140.2020, no. January, 103243. https://doi.org/10.1016/j.mechmat.2019.103243
51. Arbeiter, F, Eichinger, S, Rieß, G, Schachinger, T, Boch, R, Wenighofer, R, Galler, R, Hausberger, A, Strobl, E, Stur, M, Saliger, F, Steiner, M, Dietzel, M & Pinter, GG 2019, 'Optimierte Polymer-Rohrwerkstoffe für effiziente Drainagesysteme in Tunnelbauwerken - PolyDrain', Berg- und hüttenmännische Monatshefte : BHM, vol. 164.2019, no. 12, pp. 545-551. https://doi.org/10.1007/s00501-019-00918-6
52. Schachinger, T, Arbeiter, F, Eichinger, S & Saliger, F 2019, 'Research on pipe materials for tunnel drainage by the ÖBB Task Force Drainage', Geomechanics and tunnelling = Geomechanik und Tunnelbau, vol. 12.2019, no. 5, pp. 467-471. https://doi.org/10.1002/geot.201900022
53. Gosch, A, Berer, M, Hutař, P, Slavik, O, Vojtek, T, Arbeiter, F & Pinter, GG 2019, 'Mixed Mode I/III fatigue fracture characterization of Polyoxymethylene', International Journal of Fatigue, vol. 130.2020, no. January, pp. 105269. https://doi.org/10.1016/j.ijfatigue.2019.105269
54. Petersmann, S, Spoerk, M, Huber, P, Lang, M, Pinter, G & Arbeiter, F 2019, 'Impact Optimization of 3D‐Printed Poly(methyl methacrylate) for Cranial Implants', Macromolecular materials and engineering, vol. 304.2019, no. 11, 1900263. https://doi.org/10.1002/mame.201900263
55. Spörk, M, Arbeiter, F, Raguz, I, Holzer, C & Gonzales-Gutierrez, J 2019, 'Mechanical Recyclability of Polypropylene Composites Produced by Material Extrusion-Based Additive Manufacturing', Polymers, vol. 11.2019, no. 8, 1318. https://doi.org/10.3390/polym11081318
56. Khudiakova, A, Arbeiter, F, Spoerk, M, Wolfahrt, M, Godec, D & Pinter, G 2019, 'Inter-layer bonding characterisation between materials with different degrees of stiffness processed by fused filament fabrication', Additive Manufacturing, vol. 28.2019, no. August, pp. 184-193. https://doi.org/10.1016/j.addma.2019.05.006
57. Gonzalez-Gutierrez, J, Arbeiter, F, Schlauf, T, Kukla, C & Holzer, C 2019, 'Tensile properties of sintered 17-4PH stainless steel fabricated by material extrusion additive manufacturing', Materials letters, vol. 248.2019, no. 1 August, pp. 165-168. https://doi.org/10.1016/j.matlet.2019.04.024
58. Cano Cano, S, Gonzalez-Gutierrez, J, Sapkota, J, Spörk, M, Arbeiter, F, Schuschnigg, S, Holzer, C & Kukla, C 2019, 'Additive manufacturing of zirconia parts by fused filament fabrication and solvent debinding: Selection of binder formulation', Additive Manufacturing, vol. 26.2019, no. March, pp. 117–128. https://doi.org/10.1016/j.addma.2019.01.001
59. Frank, A, Arbeiter, FJ, Berger, IJ, Hutar, P, Náhlík, L & Pinter, G 2019, 'Fracture Mechanics Lifetime Prediction of Polyethylene Pipes', Journal of Pipeline Systems Engineering and Practice, vol. 10.2019, no. 1, 04018030. https://doi.org/10.1061/(ASCE)PS.1949-1204.0000356
60. Gosch, A, Arbeiter, FJ, Berer, M & Pinter, G 2018, 'Comparison of J-integral methods for the characterization of tough polypropylene grades close to the glass transition temperature', Engineering Fracture Mechanics, vol. 203.2018, no. November, pp. 2-17. https://doi.org/10.1016/j.engfracmech.2018.06.002
61. Spoerk, M, Savandaiah, C, Arbeiter, F, Traxler, G, Cardon, L, Holzer, C & Sapkota, J 2018, 'Anisotropic properties of oriented short carbon fibre filled polypropylene parts fabricated by extrusion-based additive manufacturing', Composites Part A: Applied Science and Manufacturing, vol. 113.2018, no. October, pp. 95-104. https://doi.org/10.1016/j.compositesa.2018.06.018
62. Hergan, P, Li, Y, Zaloznik, L, Kaynak, B, Arbeiter, F, Fauster, E & Schledjewski, R 2018, 'Using (VA)RTM with a Rigid Mould to Produce Fibre Metal Laminates with Proven Impact Strength', Journal of Manufacturing and Materials Processing, vol. 2.2018, no. 2, 38. https://doi.org/10.3390/jmmp2020038
63. Spörk, M, Arbeiter, F, Raguž, I, Weingrill, G, Fischinger, T, Traxler, G, Schuschnigg, S, Cardon, L & Holzer, C 2018, 'Polypropylene Filled With Glass Spheres in Extrusion‐Based Additive Manufacturing: Effect of Filler Size and Printing Chamber Temperature', Macromolecular materials and engineering, vol. 303.2018, no. 7, 1800179. https://doi.org/10.1002/mame.201800179
64. Fleischmann, DD, Arbeiter, F, Schaller, R, Holzner, A, Kern, W & Schlögl, S 2018, 'Influence of crosslinker and water on cyclic properties of carboxylated nitrile butadiene rubber (XNBR)', Polymer Testing, vol. 67.2018, no. May, pp. 309-321. https://doi.org/10.1016/j.polymertesting.2018.03.021
65. Arbeiter, F, Spoerk, M, Wiener, J, Gosch, A & Pinter, G 2018, 'Fracture mechanical characterization and lifetime estimation of near-homogeneous components produced by fused filament fabrication', Polymer Testing, vol. 66.2018, no. April, pp. 105-113. https://doi.org/10.1016/j.polymertesting.2018.01.002
66. Fleischmann, DD, Ayalur-Karunakaran, S, Arbeiter, F, Schaller, R, Holzner, A, Kern, W & Schlögl, S 2018, 'Influence of crosslinker and water on mechanical properties of carboxylated nitrile butadiene rubber (XNBR)', Polymer Testing, vol. 66.2018, no. April, pp. 24-31. https://doi.org/10.1016/j.polymertesting.2018.01.001
67. Spörk, M, Savandaiah, C, Arbeiter, F, Sapkota, J & Holzer, C 2017, 'Optimization of Mechanical Properties of Glass-Spheres-Filled Polypropylene Composites for Extrusion-Based Additive Manufacturing', Polymer Composites, vol. 40.2019, no. 2, pp. 638-651. https://doi.org/10.1002/pc.24701
68. Spörk, M, Sapkota, J, Weingrill, G, Fischinger, T, Arbeiter, F & Holzer, C 2017, 'Shrinkage and Warpage Optimization of Expanded-Perlite-Filled Polypropylene Composites in Extrusion-Based Additive Manufacturing', Macromolecular materials and engineering, vol. 302.2017, no. 10, 1700143. https://doi.org/10.1002/mame.201700143
69. Spörk, M, Arbeiter, F, Cajner, H, Sapkota, J & Holzer, C 2017, 'Parametric optimization of intra- and inter-layer strengths in parts produced by extrusion-based additive manufacturing of poly(lactic acid)', Journal of Applied Polymer Science, vol. 134.2017, no. 41, 45401. https://doi.org/10.1002/app.45401
70. Katschnig, M, Arbeiter, F, Haar, B, von Campe, G & Holzer, C 2016, 'Cranial Polypropylene Implants by Fused Filament Fabrication', Advanced engineering materials, vol. 19.2017, no. 4, 1600676. https://doi.org/10.1002/adem.201600676
71. Arbeiter, F, Frank, A & Pinter, GG 2016, 'Influence of molecular structure and reinforcement on fatigue behavior of tough polypropylene materials', Journal of Applied Polymer Science, vol. 133.2016, no. 38, 43948. https://doi.org/10.1002/app.43948
72. Salazar, A, Rodríguez, J, Arbeiter, F, Pinter, GG & Martínez, AB 2016, 'Fracture toughness of high density polyethylene: Fatigue pre-cracking versus femtolaser, razor sharpening and broaching', Engineering Fracture Mechanics, vol. 149.2015, no. November, pp. 199-213. https://doi.org/10.1016/j.engfracmech.2015.07.016
73. Mikula, J, Hutař, P, Nezbedová, E, Lach, R, Arbeiter, F, Ševčík, M, Pinter, G, Grellmann, W & Náhlík, L 2015, 'On crack propagation in the welded polyolefin pipes with and without the presence of weld beads', Materials & design, vol. 87, pp. 95-104. https://doi.org/10.1016/j.matdes.2015.07.131
74. Arbeiter, F, Schrittesser, B, Frank, A, Berer, M & Pinter, G 2015, 'Cyclic tests on cracked round bars as a quick tool to assess the long term behaviour of thermoplastics and elastomers', Polymer Testing, vol. 45, 4441, pp. 83-92. https://doi.org/10.1016/j.polymertesting.2015.05.008
75. Frank, A, Berger, I, Arbeiter, F & Pinter, G 2015, 'Beschleunigte Werkstoffqualifizierung mit dem zyklischen CRB-Test', 3 R, no. 04-05 2015, pp. 74-80. <https://www.di-verlag.de/de/Zeitschriften/3R/2015/04-05/Beschleunigte-Werkstoffqualifizierung-mit-dem-Zyklischen-CRB-Test>
76. Arbeiter, F, Pinter, G & Frank, A 2014, 'Characterisation of quasi-brittle fatigue crack growth in pipe grade polypropylene block copolymer', Polymer Testing, vol. 37, pp. 186-192. https://doi.org/10.1016/j.polymertesting.2014.05.016
77. Brunbauer, J, Arbeiter, F, Stelzer, S & Pinter, G 2014, 'Stiffness based fatigue characterisation of CFRP', Advanced materials research, pp. 166-171. https://doi.org/10.4028/www.scientific.net/AMR.891-892.166
78. Arbeiter, F, Pinter, G, Redhead, A & Frank, A 2012, 'Kunststofftechnik Leoben: Rohrexpertise in Spanien Präsentiert', VLK-News, pp. 18-18.

Activities

1. Department of Materials Science and Engineering, Ghent University

   Arbeiter, F. (Visiting researcher)

   15 Oct 2019 → 17 Oct 2019

2. Institute of Physics of Materials of the Academy of Sciences of the Czech Republic

   Arbeiter, F. (Visiting researcher)

   16 Feb 2017

3. Institute of Physics of Materials of the Academy of Sciences of the Czech Republic

   Arbeiter, F. (Visiting researcher)

   4 Mar 2019 → 22 Mar 2019

4. Institute of Physics of Materials of the Academy of Sciences of the Czech Republic

   Arbeiter, F. (Visiting researcher)

   13 Jan 2015

5. Institute of Physics of Materials of the Academy of Sciences of the Czech Republic

   Arbeiter, F. (Visiting researcher), Maurer, C. (Visiting researcher), Zach, D. (Visiting researcher) & Huszar, M. (Visiting researcher)

   18 Mar 2025 → 19 Mar 2025

6. Università degli Studi di Brescia

   Arbeiter, F. (Visiting researcher)

   8 Mar 2018 → 9 Mar 2018

7. 17-4PH Steel Parts Prodouced via Mateiral Extrusion Additive Manufacturing, Debindling and Sintering

   Holzer, C. (Speaker), Gonzales-Gutierrez, J. (contributor), Kukla, C. (contributor), Arbeiter, F. (contributor) & Schlauf, T. (contributor)

   18 Sept 2019

8. Analyzing and Predicting Failure Modes in Mono- and Multi-Material Extrusion-based Additive Manufactured Structures

   Waly, C. (Speaker), Schulnig, S. (contributor) & Arbeiter, F. (contributor)

   21 Nov 2024 → 22 Nov 2024

9. Deformation and fracture of lithomers - a novel class of polymeric multilayer composite materials

   Waly, C. (Speaker), Höller, R. (contributor), Pletz, M. (contributor), Griesser, T. (contributor) & Arbeiter, F. (contributor)

   24 Mar 2024 → 28 Mar 2024

10. Exploring the Interplay Between Process, Structure, and Resulting Properties in Polymeric Multi-material Composites Inspired by Lithomimetics Principle

    Waly, C. (Speaker) & Arbeiter, F. (contributor)

    19 May 2024 → 23 May 2024

11. Grabungsfreie Rohrsanierungstechnologien und deren Einsetzbarkeit für Tunneldrainagen

    Griebaum, M. (contributor) & Arbeiter, F. (Speaker)

    6 Jul 2022 → 8 Jul 2022

12. 17th International Conference on Deformation, Yield and Fracture of Polymers

    Arbeiter, F. (Invited speaker)

    27 Mar 2018

13. An Investigation on the Effects of Post-industrial Glass Fiber Flakes on the Properties of Recycled Polypopylene

    Raguz, I. (Speaker), Shahroodi, Z. (contributor), Krempl, N. (contributor), Arbeiter, F. (contributor), Friesenbichler, W. (contributor) & Holzer, C. (contributor)

    23 May 2024

14. EXPERIMENTAL INVESTIGATION INTO THE FRACTURE BEHAVIOR OF LAYERED POLYMERS

    Arbeiter, F. (Invited speaker), Waly, C. (contributor), Wiener, J. (contributor) & Pletz, M. (contributor)

    3 Jul 2024

15. Fracture of layered polymers

    Arbeiter, F. (Speaker)

    1 Sept 2021

16. Influence of crosslinker and water on mechanical properties of carboxylated nitrile butadiene rubber (XNBR)

    Fleischmann, D. D. (Speaker), Arbeiter, F. (contributor), Kern, W. (contributor) & Schlögl, S. (contributor)

    23 Apr 2018 → 25 Apr 2018

17. Methodische und werkstoffliche Besonderheiten bei der Bruchsicherheitsbewertung und Lebensdauerabschätzung von Polymerwerkstoffen mittels zyklischer mechanischer Beanspruchung

    Arbeiter, F. (Invited speaker), Frank, A. (contributor), Schrittesser, B. (contributor), Berer, M. (contributor), Hutař, P. (contributor) & Pinter, G. G. (contributor)

    28 Mar 2019

18. 29th Colloquium on Fatigue Mechanisms

    Arbeiter, F. (Participant)

    21 Mar 2019 → 22 Mar 2019

19. 8. Internationale Tagung Kunststoffe im Anlagenbau

    Arbeiter, F. (Invited speaker)

    10 Oct 2023 → 11 Oct 2023

20. A cracking approach to inventing tough new materials: fracture stranger than friction

    Arbeiter, F. (Participant)

    20 Sept 2021 → 21 Sept 2021

21. International Symposium on Smart Materials

    Arbeiter, F. (Speaker)

    14 Jun 2023 → 15 Jun 2023

22. PSM Vortragsveranstaltung: Lebensdauerabschätzung von Polymerwerkstoffen

    Arbeiter, F. (Invited speaker)

    28 Mar 2019

23. 16th International Conference on Deformation, Yield and Fracture of Polymers

    Arbeiter, F. (Speaker)

    29 Mar 2015 → 2 Apr 2015

24. 17th International Conference on Deformation, Yield and Fracture of Polymers

    Arbeiter, F. (Speaker)

    25 Mar 2018 → 29 Mar 2018

25. 18th European Mechanics of Materials Conference

    Arbeiter, F. (Speaker) & Wiener, J. (Speaker)

    4 Apr 2022 → 6 Apr 2022

26. 18th International Conference on Deformation, Yield and Fracture of Polymers

    Arbeiter, F. (Invited speaker)

    13 Apr 2022

27. 19th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics

    Arbeiter, F. (Speaker)

    15 May 2019 → 17 May 2019

28. 1st Virtual ESIS TC4 Conference on Fracture of Polymers, Composites and Adhesives

    Gosch, A. (Speaker) & Arbeiter, F. (Speaker)

    28 Sept 2021 → 29 Sept 2021

29. 1st Virtual European Conference on Fracture - VECF1

    Arbeiter, F. (Speaker)

    29 Jun 2020 → 1 Jul 2020

30. 22. Leobener Kunststoff-Kolloquium "Oberflächen und Grenzflächen in der Polymertechnologie"

    Arbeiter, F. (Speaker)

    14 Nov 2013 → 15 Nov 2013

31. 27. Leobener Kunststoff-Kolloquium

    Arbeiter, F. (Invited speaker)

    19 Apr 2018 → 20 Apr 2018

32. 28. Leobener Kunststoff-Kolloquium 2019

    Arbeiter, F. (Invited speaker)

    25 Apr 2019 → 26 Apr 2019

33. 29. Leobener Kunststoff-Kolloquium

    Arbeiter, F. (Participant)

    15 Sept 2021 → 16 Sept 2021

34. 32. Leobener Kunststoffkolloquium - 32nd Leoben-Conference on Polymer Engineering and Science 'New Materials – New Perspectives'

    Arbeiter, F. (Member of programme committee)

    21 Nov 2024

35. 32. Leobener Kunststoffkolloquium - 32nd Leoben-Conference on Polymer Engineering and Science 'New Materials – New Perspectives'

    Arbeiter, F. (Speaker)

    21 Nov 2024

36. 4a Technology Day 2020

    Arbeiter, F. (Speaker)

    3 Mar 2020 → 4 Mar 2020

37. 4th International Conference on Polymer Process Innovation (PPI)

    Arbeiter, F. (Member of programme committee)

    18 Sept 2024 → 20 Sept 2024

38. 68. Geomechanik-Kolloquium 2019

    Schachinger, T. (Speaker), Arbeiter, F. (Speaker), Eichinger, S. (Participant) & Saliger, F. (Participant)

    10 Oct 2019

39. 7th International Conference on Fracture of Polymers, Composites and Adhesives

    Arbeiter, F. (Speaker)

    14 Sept 2014 → 18 Sept 2014

40. 7th International Conference on Fracture of Polymers, Composites and Adhesives

    Arbeiter, F. (Speaker)

    17 Sept 2014

41. 8th International Conference on Fracture of Polymers, Composites and Adhesives

    Arbeiter, F. (Participant)

    10 Sept 2017 → 14 Sept 2017

42. 9th International Conference on the Fracture of Polymers and Composites

    Arbeiter, F. (Speaker)

    24 Mar 2024 → 27 Mar 2024

43. 9th International Conference on the Fracture of Polymers and Composites

    Arbeiter, F. (Chair)

    24 Mar 2024 → 27 Mar 2024

44. Advances in Polymer Science and Technology (APST) 3

    Arbeiter, F. (Speaker)

    9 Sept 2013 → 10 Sept 2013

45. ASPM2013 - Austrian Slovenian Polymer Meeting

    Arbeiter, F. (Speaker)

    3 Apr 2013 → 5 Apr 2013

46. Danube Vltava Sava Polymer Meeting - DVSPM 2017

    Arbeiter, F. (Speaker)

    6 Sept 2017

47. Danube Vltava Sava Polymer Meeting - DVSPM 2017

    Arbeiter, F. (Speaker)

    6 Sept 2017

48. ESIAM21 - Second European Conference on Structural Integrity of Additively Manufactured Materials

    Arbeiter, F. (Speaker)

    8 Sept 2021 → 10 Sept 2021

49. Eurotec 2013

    Arbeiter, F. (Speaker)

    4 Jul 2013 → 5 Jul 2013

50. Fatigue 2014

    Arbeiter, F. (Speaker)

    2 Mar 2014 → 7 Mar 2014

51. Frontiers in polymer science

    Arbeiter, F. (Participant)

    20 May 2015 → 22 May 2015

52. Plastic Pipes in Infrastructure

    Arbeiter, F. (Speaker)

    19 Apr 2016 → 21 Apr 2016

53. Plastic Pipes XVI

    Arbeiter, F. (Speaker)

    24 Sept 2012 → 26 Sept 2012

54. Plastic Pipes XVII

    Arbeiter, F. (Speaker)

    22 Sept 2014 → 24 Sept 2014

55. Plastic Pipes XVIII

    Arbeiter, F. (Speaker)

    14 Sept 2016

56. Polymer Meeting 14

    Arbeiter, F. (Invited speaker)

    30 Aug 2021 → 2 Sept 2021

57. Polymertec 2014

    Arbeiter, F. (Speaker)

    25 Jun 2014 → 27 Jun 2014

58. PPS2015 - Polymer Processing Society Conference 2015

    Arbeiter, F. (Speaker)

    21 Sept 2015 → 25 Sept 2015

59. SPE ANTEC 2017

    Arbeiter, F. (Speaker)

    8 May 2017 → 10 May 2017

60. SPE ANTEC 2017

    Arbeiter, F. (Speaker)

    9 May 2017

61. SPE ANTEC 2018

    Arbeiter, F. (Speaker)

    6 May 2018 → 10 May 2018

62. SPE ANTEC 2018

    Gosch, A. (Speaker), Arbeiter, F. (Speaker), Berer, M. (Speaker), Wiener, J. (Speaker), Frank, A. (Speaker) & Pinter, G. G. (Speaker)

    8 May 2018