Florian Arbeiter

1 - 178 out of 178Page size: 500

Research output

  1. 2025
  2. Published

    Tailored Recycled Composites: Enhancing the Performance of Injection Moulded Post-Consumer Polypropylene Composites Using Box-Behnken Design

    Shahroodi, Z., Zidar, D., Momeni, V., Arbeiter, F., Duretek, I., Krempl, N., Berger-Weber, G. & Holzer, C., 15 Feb 2025, In: Polymer Testing. 144.2025, March, 13 p., 108743.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2024
  4. Published

    Strain rate-dependent failure modes of material extrusion-based additively manufactured PETG: A study on crack deflection and penetration

    Waly, C., Schulnig, S. & Arbeiter, F., 18 Dec 2024, In: Theoretical and Applied Fracture Mechanics. 136.2025, April, 15 p., 104834.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Deformation and fracture of lithosphere-inspired polymeric multi-layer composites

    Waly, C., Höller, R., Griesser, T. & Arbeiter, F., Dec 2024, In: Results in Engineering. 24.2024, December, 9 p., 103519.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Data-driven evaluation of the Paris’ law parameters in polyethylene pipe grades — Increasing the precision of fracture mechanical lifetime estimation

    Messiha, M., Wiener, J., Arbeiter, F. & Pinter, G., 25 Nov 2024, In: Engineering Fracture Mechanics. 311.2024, 25 November, 18 p., 110540.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Polyethylene pipes for distribution of gaseous hydrogen

    Arbeiter, F., Bredács, M., Fechtig, D. & Bradler, P., 22 Nov 2024, p. 1. 6 p.

    Research output: Contribution to conference › Paper

  8. Published

    Christian Doppler Laboratory for Impact of Recycled Materials on the mechanical lifetime estimation of polymers

    Maurer, C., Zach, D., Travnicek, L. & Arbeiter, F., 21 Nov 2024, p. 1-1.

    Research output: Contribution to conference › Poster › Research

  9. Published

    Numerical simulation of non-pressure polypropylene pipes in underground operating conditions

    Travnicek, L., Arbeiter, F. & Poduška, J., 21 Nov 2024, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  10. Published

    Waste-to-Value Feasibility Study: Assessing the Viability and Quality of Incorporating Different Postindustrial Glass-Fiber Composites into Postconsumer Recycled Polypropylene

    Shahroodi, Z., Krempl, N., Zidar, D., Mayrhofer, T., Kirschnick, U., Arbeiter, F., Duretek, I. & Holzer, C., 7 Aug 2024, In: ACS Sustainable Chemistry and Engineering. 12.2024, 33, p. 12619-12631 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Multi-Material 3D Printing of Biobased Epoxy Resins

    Bergoglio, M., Rossegger, E., Schlögl, S., Griesser, T., Waly, C., Arbeiter, F. & Sangermano, M., 27 May 2024, In: Polymers. 16.2024, 11, 18 p., 1510.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    An Investigation on The Effects of Post-industrial Glass Fiber Flakes on the Properties of Recycled Polypropylene

    Raguz, I., Shahroodi, Z., Krempl, N., Arbeiter, F., Friesenbichler, W. & Holzer, C., 23 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  13. Published

    Reducing part deformation of isotactic polypropylene specimens fabricated with powder bed fusion technique through controlling crystallization behaviors

    Gao, X., Guo, J., Zhang, D., Li, J., Su, Y., Arbeiter, F. & Li, H., 24 Apr 2024, In: Journal of polymer science. 62.2024, 13, p. 3025-3037 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Effects of Printing Direction and Multi-material on Hardness of Additively Manufactured Thermoplastic Elastomers for Comfortable Orthoses and Prostheses

    Michalec, P., Varsavas, S. D., Arbeiter, F., Weidner, R. & Faller, L.-M., 2024, Additive Manufacturing in Multidisciplinary Cooperation and Production. Drstvensek, I., Pal, S. & Ihan Hren, N. (eds.). Cham: Springer International Publishing, p. 33-41 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  15. 2023
  16. Published

    Maßgeschneiderte Sanierungsverfahren für die Tunnelentwässerung - "DrainRepair": Teil 2: Ergebnisbericht

    Arbeiter, F., Schachinger, T., Wenighofer, R., Rieß, G., Steiner, M., Micic Batka, V., Griebaum, M., Laufer, V. & Galler, R., 7 Dec 2023, In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 12, p. 566-571 5 p.

    Research output: Contribution to journal › Article › Research

  17. Published

    Determination of creep crack growth kinetics of ABS via the C* approach at different temperatures

    Wainstein, J., Wiener, J., Arbeiter, F. & Frontini, P. M., Dec 2023, In: Results in Engineering. 20.2023, December, 9 p., 101481.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Crack penetration versus deflection in extrusion-based additive manufacturing – Impact of nozzle temperature and morphology

    Waly, C., Petersmann, S. & Arbeiter, F., Oct 2023, In: Theoretical and Applied Fracture Mechanics. 127.2023, October, 13 p., 104032.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Statistical-based optimization of fused filament fabrication parameters for short-carbon-fiber-reinforced poly-ether-ether-ketone considering multiple loading conditions

    de Carvalho, W. S., Marzemin, F., Belei, C., Petersmann, S., Arbeiter, F. & de Traglia Amancio-Filho, S., 15 Sept 2023, In: Polymer Testing. 128.2023, November, 13 p., 108207.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Optimization and manufacture of polyetheretherketone patient specific cranial implants by material extrusion: A clinical perspective

    Smith, J. A., Petersmann, S., Arbeiter, F. & Schäfer, U., Aug 2023, In: Journal of the Mechanical Behavior of Biomedical Materials. 144.2023, August, 25 p., 105965.

    Research output: Contribution to journal › Review article › peer-review

  21. E-pub ahead of print

    Concepts towards bio-inspired multilayered polymer-composites

    Wiener, J., Arbeiter, F. & Pinter, G. G., 21 Jul 2023, (E-pub ahead of print) In: Procedia Structural Integrity. 2023, 47, p. 253-260 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Personalization of Complex Vaginal Inserts of Ethylene Vinyl Acetate via 3D-Printing

    Eder, S., Kuchler, L., Katschnig, M., Brandl, B., Wolfgang, M., Koutsamanis, I., Hentschel, L., Arbeiter, F., Roblegg, E. & Spoerk, M., 13 Jul 2023, In: Advanced Materials Technologies. 8.2023, 17, 15 p., 2300237.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Bioinspired fracture toughness enhancement of a fully bio-based epoxy resin

    Schwaiger, M., Waly, C., Huszar, M., Oreski, G., Feuchter, M., Arbeiter, F. & Resch-Fauster, K., Jul 2023, In: Polymer Testing. 124.2023, July, 10 p., 108098.

    Research output: Contribution to journal › Article › Research › peer-review

  24. E-pub ahead of print

    Effect of recycled material on failure by slow crack growth in multi-layer polyethylene pipes

    Trávníček, L., Poduška, J., Messiha, M., Arbeiter, F., Pinter, G. G., Náhlík, L. & Hutař, P., 14 Jun 2023, (E-pub ahead of print) In: Engineering Fracture Mechanics. 289.2023, 1 September, 18 p., 109423.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Effects of simulated body fluid on the mechanical properties of polycarbonate polyurethane produced via material jetting

    Petersmann, S., Huemer, M., Hentschel, L. & Arbeiter, F., 6 Mar 2023, In: Polymer Testing. 120.2023, March, 10 p., 107977.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Corrigendum to “Personalised urethra pessaries prepared by material extrusion-based additive manufacturing” [Int. J. Pharm. 608 (2021) 121112] (International Journal of Pharmaceutics (2021) 608, (S0378517321009182), (10.1016/j.ijpharm.2021.121112))

    Spörk, M., Arbeiter, F., Koutsamanis, I., Cajner, H., Katschnig, M. & Eder, S., 25 Jan 2023, In: International Journal of Pharmaceutics. 631.2023, 25 January, 1 p., 122548.

    Research output: Contribution to journal › Comment/debate › peer-review

  27. Published

    Material extrusion-based additive manufacturing of polyetheretherketone cranial implants: Mechanical performance and print quality

    Petersmann, S., Smith, J. A., Schäfer, U. & Arbeiter, F., Jan 2023, In: Journal of Materials Research and Technology. 22.2023, January-February, p. 642-657 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    ESTIMATION OF THE LIFE TIME OF 3D-PRINTED CONTINUOUS FIBER-REINFORCED COMPONENTS

    Petersmann, S., Kaylani, D., Stadler, G., Leßlhumer, J., Lammer, H., Arbeiter, F. & Pinter, G., 2023.

    Research output: Contribution to conference › Paper › peer-review

  29. 2022
  30. E-pub ahead of print

    A review of parameters affecting success of lower-limb prosthetic socket and liners and implementation of 3D printing technologies

    Varsavas, S. D., Riemelmoser, F., Arbeiter, F. & Faller, L. M., 22 Sept 2022, (E-pub ahead of print) In: Materials Today: Proceedings. 70.2022, p. 425-430 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Ermüdungsverhalten von 3D-gedrucktem endlosfaserverstärktem Polylactid

    Petersmann, S., Primetzhofer, A., Habicher, M., Lammer, H., Leßlhumer, J. & Arbeiter, F., 21 Jul 2022, Book of Abstracts Verbund 2022.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Influence of layer architecture on fracture toughness and specimen stiffness in polymer multilayer composites

    Wiener, J., Arbeiter, F., Kolednik, O. & Pinter, G., Jul 2022, In: Materials and Design. 219.2022, July, 10 p., 110828.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    On the slow crack growth process and associated structure–property relationships in polyamide 12 grades

    Messiha, M., Frank, A., Arbeiter, F. & Pinter, G., 20 Jun 2022, In: Journal of applied polymer science. 139.2022, 24, 15 p., 52357.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Parameter Optimization of the ARBURG Plastic Freeforming Process by Means of a Design of Experiments Approach

    Hentschel, L., Petersmann, S., Gonzalez-Gutierrez, J., Kynast, F., Schäfer, U., Arbeiter, F. & Holzer, C., 31 May 2022, In: Advanced engineering materials. 24.2022, 11 p., 2200279.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    The Effects of Washing and Formaldehyde Sterilization on the Mechanical Performance of Poly(methyl Methacrylate) (PMMA) Parts Produced by Material Extrusion-Based Additive Manufacturing or Material Jetting

    Petersmann, S., Hentschel, L., Gonzalez-Gutierrez, J., Tödtling, M., Schäfer, U., Arbeiter, F. & Üçal, M., 13 May 2022, In: Advanced engineering materials. 24.2022, 2200225.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Combined Crack Initiation and Crack Growth Model for Multi-Layer Polymer Materials

    Pletz, M. & Arbeiter, F. J., 3 May 2022, In: Materials. 15.2022, 9, 13 p., 3273.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Toward a new generation of vaginal pessaries via 3D-printing: Concomitant mechanical support and drug delivery

    Eder, S., Wiltschko, L., Koutsamanis, I., Afonso Urich, J. A., Arbeiter, F., Roblegg, E. & Spoerk, M., May 2022, In: European Journal of Pharmaceutics and Biopharmaceutics. 174.2022, May, p. 77-89 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Fatigue behaviour of thermoplastic bulk materials under mixed mode loading conditions

    Gosch, A., Arbeiter, F., Berer, M., Vojtek, T., Hutař, P. & Pinter, G. G., 14 Apr 2022, 18th International Conference on Deformation, Yield and Fracture of Polymers.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Effect of die temperature on the fatigue behaviour of PLA produced by means of fused filament fabrication

    Petersmann, S., Primetzhofer, A., Habicher, M., Leßlhumer, J., Lammer, H. & Arbeiter, F., 11 Apr 2022.

    Research output: Contribution to conference › Poster › Research

  40. Published

    Effect of die temperature on the fatigue behaviour of PLA produced by means of fused filament fabrication

    Petersmann, S., Primetzhofer, A., Habicher, M., Leßlhumer, J., Lammer, H. & Arbeiter, F., 11 Apr 2022, Book of abstracts from 18th International Conference on Deformation, Yield and Fracture of Polymers.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Mechanical properties of additively manufactured polymeric implant materials in dependence of microstructure, temperature and strain-rate

    Petersmann, S., Spörk, M., Van De Steene, W., Üçal, M., Wiener, J., Pinter, G. G. & Arbeiter, F., 5 Apr 2022, Abstract Book of 18th European Mechanics of Materials Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. E-pub ahead of print

    Characterization methods for strain-induced damage in polypropylene

    Wiener, J., Preissegger, F., Plank, B., Arbeiter, F., Kolednik, O. & Pinter, G., 4 Apr 2022, (E-pub ahead of print) In: Polymer Engineering and Science. 62.2022, 6, p. 1959-1973 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Multimaterial Extrusion-Based Additive Manufacturing of Compliant Crack Arrester: Influence of Interlayer Length, Thickness, and Applied Strain Rate

    Waly, C., Petersmann, S. & Arbeiter, F., 23 Feb 2022, In: Advanced engineering materials. 2022, 11 p., 2101703.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Mechanisms of rapid fracture in PA12 grades

    Messiha, M., Frank, A., Heimink, J., Arbeiter, F. & Pinter, G., Feb 2022, In: Theoretical and Applied Fracture Mechanics. 117.2022, February, 11 p., 103145.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    How hydrogen bonds influence the slow crack growth resistance of polyamide 12

    Messiha, M., Frank, A., Arbeiter, F. & Pinter, G., 17 Jan 2022, In: Polymer. 239.2022, 17 January, 10 p., 124437.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    LIFE TIME ESTIMATION OF 3D-PRINTED CONTINUOUS FIBER REINFORCED PARTS UNDER FATIGUE LOADING

    Primetzhofer, A., Petermann, S., Dietsch, R., Leßlhumer, J., Arbeiter, F. & Pinter, G., 2022, Characterization. Vassilopoulos, A. P. & Michaud, V. (eds.). p. 791-797 7 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. 2021
  48. Published

    Correction to: Modelling Failure Of Polymers: An Optimization Strategy Based on Genetic Algorithms and Instrumented Impact Tests (Journal of Dynamic Behavior of Materials, (2021), 7, 4, (538-552), 10.1007/s40870-021-00297-5)

    Rueda, F., Rull, N., Quintana, C., Torres, J. P., Messiha, M., Frank, A., Arbeiter, F., Frontini, P. M. & Pinter, G., Dec 2021, In: Journal of dynamic behavior of materials. 7, 4, p. 628 1 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  49. Published

    Maßgeschneiderte Sanierungsverfahren für die Tunnelentwässerung – DrainRepair

    Arbeiter, F., Schachinger, T., Wenighofer, R., Rieß, G., Steiner, M., Schoen, A., Griebaum, M., Laufer, V. & Galler, R., 30 Nov 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 12, p. 583-588 6 p.

    Research output: Contribution to journal › Article › Research

  50. Published

    Personalised urethra pessaries prepared by material extrusion-based additive manufacturing

    Spoerk, M., Arbeiter, F., Koutsamanis, I., Cajner, H., Katschnig, M. & Eder, S., 25 Oct 2021, In: International Journal of Pharmaceutics. 608.2021, 25 October, 13 p., 121112.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Structure-Property Relationships of Polyamide 12 Grades Exposed to Rapid Crack Extension

    Messiha, M., Frank, A., Heimink, J., Arbeiter, F. & Pinter, G., 8 Oct 2021, In: Materials. 14.2021, 19, 12 p., 5899.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    A combined experimental and simulation-based approach towards toughness optimized polymeric multi-layer structures

    Arbeiter, F., Wiener, J., Tiwari, A., Pinter, G. G. & Kolednik, O., 28 Sept 2021.

    Research output: Contribution to conference › Poster › Research

  53. Published

    Effect of the specimen size on the applicability of the load separation criterion in J-testing of polymers

    Gosch, A., Arbeiter, F., Berer, M., Agnelli, S., Baldi, F. & Pinter, G. G., 28 Sept 2021, Book of abstracts - 1st Virtual ESIS TC4 Conference on Fracture of Polymers, Composites and Adhesives.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Damage tolerance and fracture properties in fused filament fabrication - trends, limitations and possibilities

    Arbeiter, F., 8 Sept 2021, Abstract Book of the Second European Conference on Structural Integrity of Additively Manufactured Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Morphology and Weld Strength of a Semi-Crystalline Polymer Produced via Material Extrusion-Based Additive Manufacturing

    Petersmann, S., Primetzhofer, A., Lammer, H., Leßlhumer, J., Pinter, G. G. & Arbeiter, F., 8 Sept 2021, Abstract Book of the Second European Conference on Structural Integrity of Additively Manufactured Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Fracture of layered polymers

    Arbeiter, F., Petersmann, S., Wiener, J. & Spoerk, M., 31 Aug 2021.

    Research output: Contribution to conference › Abstract

  57. Published

    Changing morphological features in a semi-crystalline polymer in material-extrusion based additive manufacturing

    Petersmann, S., Spörk-Erdely, P., Feuchter, M., Wieme, T., Arbeiter, F. & Spoerk, M., 30 Aug 2021, Polymer Meeting 14: Book of Abstracts. Slugovec, C. & Trimmel, G. (eds.). TU Graz, p. 60 CL-A4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Bending Properties of Lightweight Copper Specimens with Different Infill Patterns Produced by Material Extrusion Additive Manufacturing, Solvent Debinding and Sintering

    Gonzalez-Gutierrez, J., Cano Cano, S., Ecker, J. V., Kitzmantel, M., Arbeiter, F., Kukla, C. & Holzer, C., 6 Aug 2021, In: Applied Sciences : open access journal. 11, 16, 7262.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Modelling Failure Of Polymers: An Optimization Strategy Based on Genetic Algorithms and Instrumented Impact Tests

    Rueda, F., Rull, N., Quintana, C., Torres, J. P., Messiah, M., Frank, A., Arbeiter, F., Frontini, P. M. & Pinter, G., 30 Apr 2021, In: Journal of dynamic behavior of materials.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Size-Induced Constraint Effects on Crack Initiation and Propagation Parameters in Ductile Polymers

    Gosch, A., Arbeiter, F. J., Agnelli, S., Berer, M. & Baldi, F., 13 Apr 2021, In: Materials. 14.2021, 8, 23 p., 1945.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Correlation of the cyclic cracked round bar test and hydrostatic pressure test for unplasticized polyvinylchloride

    Frank, A., Messiha, M., Koch, T., Poduška, J., Hutař, P., Arbeiter, F. & Pinter, G., 19 Feb 2021, In: Polymer Testing. 95.2021, March, 7 p., 107125.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Optimization of Mechanical Properties and Damage Tolerance in Polymer-Mineral Multilayer Composites

    Wiener, J., Kaineder, H., Kolednik, O. & Arbeiter, F., 4 Feb 2021, In: Materials. 14.2021, 4, p. 1-19 19 p., 725.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Mechanical properties of layered polymers

    Arbeiter, F., 2021

    Research output: Thesis › Habilitation thesis › peer-review

  64. 2020
  65. Published

    Fatigue characterization of polyethylene under mixed mode I/III conditions

    Gosch, A., Arbeiter, F., Berer, M., Vojtek, T., Hutař, P. & Pinter, G. G., 15 Dec 2020, In: International Journal of Fatigue. 145.2021, April, 13 p., 106084.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Development of Porous Polyurethane Implants Manufactured via Hot-Melt Extrusion

    Koutsamanis, I., Spoerk, M., Arbeiter, F., Eder, S. & Roblegg, E., 10 Dec 2020, In: Polymers. 12.2020, 12, p. 1-22 22 p., 2950.

    Research output: Contribution to journal › Article › Research › peer-review

  67. E-pub ahead of print

    Methods for automated crack length detection in fracture mechanical fatigue tests of unreinforced polymers

    Gosch, A., Geier, J., Arbeiter, F., Berer, M. & Pinter, G. G., 1 Dec 2020, (E-pub ahead of print) In: Procedia structural integrity / ESIS, European Structural Integrity Society. 28.2020, p. 1184-1192 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Damage tolerance-based methodology for fatigue lifetime estimation of a structural component produced by material extrusion-based additive manufacturing

    Arbeiter, F., Trávníček, L., Petersmann, S., Dlhý, P., Spoerk, M., Pinter, G. & Hutař, P., Dec 2020, In: Additive Manufacturing. 36, 101730.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Effect of polyethylene and polypropylene cross-contamination on slow crack growth resistance

    Messiha, M., Frank, A., Koch, T., Arbeiter, F. & Pinter, G., 16 Nov 2020, In: International journal of polymer analysis and characterization. 25, 8, p. 649-666 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Optimierte Polymer-Rohrwerkstoffe für effiziente Drainagesysteme in Tunnelbauwerken—PolyDrain Teil II

    Arbeiter, F., Eichinger, S., Rieß, G., Schachinger, T., Boch, R., Wenighofer, R., Galler, R., Hausberger, A., Strobl, E., Stur, M., Saliger, F., Steiner, M., Dietzel, M. & Pinter, G., 6 Nov 2020, In: Berg- und hüttenmännische Monatshefte : BHM. 165.2020, 11, p. 623-630 8 p.

    Research output: Contribution to journal › Article › Research

  71. Published

    Using Compliant Interlayers as Crack Arresters in 3-D-Printed Polymeric Structures

    Arbeiter, F., Petersmann, S., Wiener, J., Oesterreicher, F., Spörk, M. & Pinter, G. G., 1 Nov 2020, In: Materials Performance and Characterization. 9, 5, 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    J-testing of polymers via the load separation criterion based ESIS TC4 procedure: Effect of the specimen size

    Gosch, A., Arbeiter, F. J., Agnelli, S., Berer, M., Pinter, G. & Baldi, F., Sept 2020, In: Polymer Testing. 89, September, 10 p., 106637.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Applicability of the load separation criterion in J-testing of polymers: Effect of the specimen size

    Gosch, A., Arbeiter, F., Agnelli, S., Berer, M., Pinter, G. G. & Baldi, F., 29 Jun 2020.

    Research output: Contribution to conference › Abstract

  74. Published

    Process-induced morphological features in material extrusion-based additive manufacturing of polypropylene

    Petersmann, S., Spörk-Erdely, P., Feuchter, M., Wieme, T., Arbeiter, F. & Spörk, M., 18 Jun 2020, In: Additive Manufacturing. 35.2020, October, 16 p., 101384.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Mechanical properties of polymeric implant materials produced by extrusion-based additive manufacturing

    Petersmann, S., Spörk, M., Van De Steene, W., Üçal, M., Wiener, J., Pinter, G. G. & Arbeiter, F., 1 Apr 2020, In: Journal of the Mechanical Behavior of Biomedical Materials. 104.2020, April, 13 p., 103611.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Exploiting the Carbon and Oxa Michael Addition Reaction for the Synthesis of Yne Monomers: Towards the Conversion of Acrylates to Biocompatible Building Blocks

    Hennen, D., Hartmann, D., Rieger, P. H., Oesterreicher, A., Wiener, J., Arbeiter, F., Feuchter, M., Fröhlich, E., Pichelmayer, M., Schlögl, S. & Griesser, T., 20 Mar 2020, In: ChemPhotoChem . 4.2020, 7, p. 476-480 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Slow crack growth resistance of modern PA-U12 grades measured by cyclic cracked round bar tests and strain hardening tests

    Messiha, M., Gerets, B., Heimink, J., Frank, A., Arbeiter, F. & Engelsing, K., 3 Mar 2020, In: Polymer Testing. 86.2020, June, 11 p., 106468.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Methods for automated crack length detection in fracture mechanical fatigue tests of unreinforced polymers

    Gosch, A., Geier, J., Arbeiter, F., Berer, M. & Pinter, G., 2020, In: Procedia Structural Integrity. 28, p. 1184-1192 9 p.

    Research output: Contribution to journal › Conference article › peer-review

  79. Published

    Stress intensity factors in novel specimens for crack propagation under loading conditions II+III in polymers

    Slavik, O., Hutař, P., Berer, M., Gosch, A., Vojtek, T., Arbeiter, F. & Náhlík, L., 2020, AIP Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Accepted/In press

    Structural integrity of shrinkage and warpage optimized polypropylene produced by material extrusion-based additive manufacturing

    Petersmann, S., Spörk, M., Wiener, J., Pinter, G. G. & Arbeiter, F., 2020, (Accepted/In press).

    Research output: Contribution to conference › Abstract › peer-review

  81. Published

    Tailoring composite architecture to improve the toughness of pipe grade materials

    Wiener, J., Arbeiter, F., Frank, A. & Pinter, G., 2020, SPE ANTEC 2020: The Annual Technical Conference for Plastic Professionals. p. 782-786 5 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. 2019
  83. Published

    Fatigue Crack Propagation under Mixed Mode I and III in Polyoxymethelene Homopolymer

    Slavik, O., Hutař, P., Gosch, A., Berer, M., Vojtek, T., Arbeiter, F., Pinter, G. G. & Nahlik, L., 13 Dec 2019, Key Engineering Materials. 827 ed. Vol. 2019. p. 404-409 6 p. (Key Engineering Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  84. E-pub ahead of print

    Application of the material inhomogeneity effect for the improvement of fracture toughness of a brittle polymer

    Tiwari, A., Wiener, J., Arbeiter, F., Pinter, G. & Kolednik, O., 4 Dec 2019, (E-pub ahead of print) In: Engineering Fracture Mechanics. 224.2020, March, 16 p., 106776.

    Research output: Contribution to journal › Article › Research › peer-review

  85. E-pub ahead of print

    Bioinspired toughness improvement through soft interlayers in mineral reinforced polypropylene

    Wiener, J., Arbeiter, F., Tiwari, A., Kolednik, O. & Pinter, G., 19 Nov 2019, (E-pub ahead of print) In: Mechanics of materials. 140.2020, January, 13 p., 103243.

    Research output: Contribution to journal › Article › Research › peer-review

  86. E-pub ahead of print

    Optimierte Polymer-Rohrwerkstoffe für effiziente Drainagesysteme in Tunnelbauwerken - PolyDrain

    Arbeiter, F., Eichinger, S., Rieß, G., Schachinger, T., Boch, R., Wenighofer, R., Galler, R., Hausberger, A., Strobl, E., Stur, M., Saliger, F., Steiner, M., Dietzel, M. & Pinter, G. G., 18 Nov 2019, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 12, p. 545-551 7 p.

    Research output: Contribution to journal › Article › Research

  87. Published

    Destroying or Enhancing the Mechanical Properties of Carbon Fibre Filled PA12 filaments for Additive Manufacturing?

    Holzer, C., Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Arbeiter, F., Liu, D., Wuzella, G. H. & Lammer, H., 7 Nov 2019, p. 59-59. 1 p.

    Research output: Contribution to conference › Abstract › peer-review

  88. Published

    Research on pipe materials for tunnel drainage by the ÖBB Task Force Drainage

    Schachinger, T., Arbeiter, F., Eichinger, S. & Saliger, F., 1 Oct 2019, In: Geomechanics and tunnelling = Geomechanik und Tunnelbau. 12.2019, 5, p. 467-471 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. E-pub ahead of print

    Mixed Mode I/III fatigue fracture characterization of Polyoxymethylene

    Gosch, A., Berer, M., Hutař, P., Slavik, O., Vojtek, T., Arbeiter, F. & Pinter, G. G., 13 Sept 2019, (E-pub ahead of print) In: International Journal of Fatigue. 130.2020, January, p. 105269 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Influencing carbonate scaling by tailored drainage materials in tunnels - an experimental approach

    Eichinger, S., Arbeiter, F., Boch, R., Schachinger, T. & Dietzel, M., 6 Sept 2019.

    Research output: Contribution to conference › Poster › Research

  91. E-pub ahead of print

    Impact Optimization of 3D‐Printed Poly(methyl methacrylate) for Cranial Implants

    Petersmann, S., Spoerk, M., Huber, P., Lang, M., Pinter, G. & Arbeiter, F., 30 Aug 2019, (E-pub ahead of print) In: Macromolecular materials and engineering. 304.2019, 11, 10 p., 1900263.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Finite element model to describe crack deflection and constrained micro-cracking

    Tauscher, M., Pletz, M., Arbeiter, F. & Schuecker, C., 28 Aug 2019, p. 371-374. 4 p.

    Research output: Contribution to conference › Paper

  93. Published

    Mechanical Recyclability of Polypropylene Composites Produced by Material Extrusion-Based Additive Manufacturing

    Spörk, M., Arbeiter, F., Raguz, I., Holzer, C. & Gonzales-Gutierrez, J., 7 Aug 2019, In: Polymers. 11.2019, 8, 18 p., 1318.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Inter-layer bonding characterisation between materials with different degrees of stiffness processed by fused filament fabrication

    Khudiakova, A., Arbeiter, F., Spoerk, M., Wolfahrt, M., Godec, D. & Pinter, G., 1 Aug 2019, In: Additive Manufacturing. 28.2019, August, p. 184-193 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Using soft interlayers as crack arrester in polymeric 3D-printed structures

    Arbeiter, F., Spörk, M., Wiener, J., Oesterreicher, F. & Pinter, G. G., 17 May 2019, 19th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics. p. 1 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Erhöhung der Bruchzähigkeit durch Multischichtaufbau

    Arbeiter, F., Oesterreicher, F., Wiener, J., Spörk, M. & Pinter, G. G., 26 Apr 2019, 28. Leobener Kunststoff-Kolloquium 2019. 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Tensile properties of sintered 17-4PH stainless steel fabricated by material extrusion additive manufacturing

    Gonzalez-Gutierrez, J., Arbeiter, F., Schlauf, T., Kukla, C. & Holzer, C., 8 Apr 2019, In: Materials letters. 248.2019, 1 August, p. 165-168 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Additive manufacturing of zirconia parts by fused filament fabrication and solvent debinding: Selection of binder formulation

    Cano Cano, S., Gonzalez-Gutierrez, J., Sapkota, J., Spörk, M., Arbeiter, F., Schuschnigg, S., Holzer, C. & Kukla, C., 1 Mar 2019, In: Additive Manufacturing. 26.2019, March, p. 117–128 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Fracture Mechanics Lifetime Prediction of Polyethylene Pipes

    Frank, A., Arbeiter, F. J., Berger, I. J., Hutar, P., Náhlík, L. & Pinter, G., 1 Feb 2019, In: Journal of Pipeline Systems Engineering and Practice. 10.2019, 1, 04018030.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Differences and similarities in fatigue failure mechanisms of PA12 pipe grades compared to modern PE pipe grades

    Messiha, M., Frank, A., Berger, I., Heimink, J., Van Laak, H., Pinter, G. & Arbeiter, F., 1 Jan 2019.

    Research output: Contribution to conference › Paper › peer-review

  101. Published

    Mechanical Characterization of PMMA Produced by Fused Filament Fabrication as a Potential Material for Cranial Bone Reconstruction

    Petersmann, S., Spörk, M., Lang, M. C., Moser, C., Pinter, G. G. & Arbeiter, F., 2019, Abstract Book of the First European Conference on Structural Integrity of Additively Manufactured Materials. 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. 2018
  103. Published

    The consequences of different printing chamber temperatures in extrusion-based additive manufacturing

    Spörk, M., Arbeiter, F., Raguz, I., Traxler, G., Schuschnigg, S., Cardon, L. & Holzer, C., 21 Sept 2018.

    Research output: Contribution to conference › Paper › peer-review

  104. Published

    Numerical Modelling of Cylindrical Specimen under Mixed-Mode Loading Conditions

    Slavik, O., Hutar, P., Berer, M., Gosch, A., Arbeiter, F., Pinter, G. G. & Nahlik, L., 2 Aug 2018, p. 325. 330 p.

    Research output: Contribution to conference › Paper › peer-review

  105. Published

    Comparison of J-integral methods for the characterization of tough polypropylene grades close to the glass transition temperature

    Gosch, A., Arbeiter, F. J., Berer, M. & Pinter, G., 22 Jun 2018, In: Engineering Fracture Mechanics. 203.2018, November, p. 2-17 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Anisotropic properties of oriented short carbon fibre filled polypropylene parts fabricated by extrusion-based additive manufacturing

    Spoerk, M., Savandaiah, C., Arbeiter, F., Traxler, G., Cardon, L., Holzer, C. & Sapkota, J., 11 Jun 2018, In: Composites Part A: Applied Science and Manufacturing. 113.2018, October, p. 95-104 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    Using (VA)RTM with a Rigid Mould to Produce Fibre Metal Laminates with Proven Impact Strength

    Hergan, P., Li, Y., Zaloznik, L., Kaynak, B., Arbeiter, F., Fauster, E. & Schledjewski, R., 11 Jun 2018, In: Journal of Manufacturing and Materials Processing. 2.2018, 2, 12 p., 38.

    Research output: Contribution to journal › Article › Research › peer-review

  108. Published

    Polypropylene Filled With Glass Spheres in Extrusion‐Based Additive Manufacturing: Effect of Filler Size and Printing Chamber Temperature

    Spörk, M., Arbeiter, F., Raguž, I., Weingrill, G., Fischinger, T., Traxler, G., Schuschnigg, S., Cardon, L. & Holzer, C., 16 May 2018, In: Macromolecular materials and engineering. 303.2018, 7, 15 p., 1800179.

    Research output: Contribution to journal › Article › Research › peer-review

  109. Published

    Material selection, testing and validation of additively manufactured components

    Wiener, J., Arbeiter, F., Spörk, M., Gosch, A. & Pinter, G. G., 9 May 2018.

    Research output: Contribution to conference › Paper › peer-review

  110. Published

    Application of J-integral methods to tough pipe materials

    Gosch, A., Arbeiter, F., Berer, M., Wiener, J., Frank, A. & Pinter, G. G., 7 May 2018.

    Research output: Contribution to conference › Paper › peer-review

  111. Published

    Fracture mechanic principles for multi-layer pipe-wall design

    Arbeiter, F., Gosch, A., Wiener, J., Frank, A. & Pinter, G. G., 7 May 2018, p. 1. 4 p.

    Research output: Contribution to conference › Paper › peer-review

  112. Published

    Anforderungen an die Aufbereitung von Polyamid-Altpulver zur Wiederverwendung im SLS Prozess

    Berer, M., Schrank, T., Hendlich, M., Meier, G., Arbeiter, F., Lackner, J. & Kraschitzer, W., 20 Apr 2018.

    Research output: Contribution to conference › Paper

  113. Published

    Strukturbauteile aus dem 3D-Drucker: begleitende Werkstoffprüfung zur Eigenschaftsoptimierung

    Arbeiter, F., Wiener, J., Spörk, M. & Pinter, G. G., 20 Apr 2018, p. 1. 4 p.

    Research output: Contribution to conference › Paper

  114. Published

    Factors influencing CRB test results

    Poduska, J., Hutař, P., Kucera, J., Frank, A., Arbeiter, F. & Náhlík, L., 11 Apr 2018, p. 105. 109 p.

    Research output: Contribution to conference › Paper

  115. Published

    Study of mixed mode crack propagation in pipe type specimen

    Slavik, O., Hutar, P., Berer, M., Gosch, A., Arbeiter, F. & Náhlík, L., 11 Apr 2018, p. 133. 138 p.

    Research output: Contribution to conference › Paper

  116. Published

    Influence of strand orientation on mechanical properties in near homogeneous FFF produced PLA parts

    Wiener, J., Arbeiter, F., Spörk, M., Gosch, A. & Pinter, G. G., 27 Mar 2018.

    Research output: Contribution to conference › Poster › Research

  117. Published

    Toughening of polymeric materials by utilizing spatial material property variations: Towards bio-inspired multi-layered materials

    Arbeiter, F., Wiener, J., Gosch, A., Pinter, G. G. & Kolednik, O., 25 Mar 2018, p. 1. 4 p.

    Research output: Contribution to conference › Paper

  118. Published

    Influence of crosslinker and water on cyclic properties of carboxylated nitrile butadiene rubber (XNBR)

    Fleischmann, D. D., Arbeiter, F., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 12 Mar 2018, In: Polymer Testing. 67.2018, May, p. 309-321 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  119. Published

    Fracture mechanical characterization and lifetime estimation of near-homogeneous components produced by fused filament fabrication

    Arbeiter, F., Spoerk, M., Wiener, J., Gosch, A. & Pinter, G., 5 Jan 2018, In: Polymer Testing. 66.2018, April, p. 105-113 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  120. Published

    Influence of crosslinker and water on mechanical properties of carboxylated nitrile butadiene rubber (XNBR)

    Fleischmann, D. D., Ayalur-Karunakaran, S., Arbeiter, F., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 5 Jan 2018, In: Polymer Testing. 66.2018, April, p. 24-31 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  121. Published

    Biomimetic Design Concepts for the Pipe Architecture of Tomorrow

    Pinter, G. G., Arbeiter, F., Wiener, J., Frank, A. & Kolednik, O., 2018, Proceedings Plastics Pipes XIX. 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  122. Published

    Control of Material Behavior and Media Resistance of Carboxylated Nitrile Butadiene Rubber (XNBR)

    Fleischmann, D. D., Schlögl, S., Arbeiter, F. & Kern, W., 2018.

    Research output: Contribution to conference › Poster › Research

  123. Published

    Determination of the Slow Crack Growth Resistance of PA12 Pipe Grades

    Messiha, M., Frank, A., Berger, I. J., Heimink, J., van Laak, H., Arbeiter, F. & Pinter, G. G., 2018, Proceedings Plastics Pipes XIX. 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  124. Published

    Fracture mechanical characterization of non-virgin pipe materials

    Frank, A., Berger, I. J., Koch, T., Arbeiter, F. & Pinter, G. G., 2018, Proceedings ANTEC 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  125. Published

    Mode III fatigue in technical thermoplastics

    Gosch, A., Berer, M., Dlhy, P., Hutar, P., Arbeiter, F. & Pinter, G. G., 2018.

    Research output: Contribution to conference › Poster › Research

  126. Published

    Slow Crack Growth Resistance of Non-Vorgin Polymers

    Frank, A., Berger, I. J., Messiha, M., Arbeiter, F., Koch, T. & Pinter, G. G., 2018, Procedings Plastics Pipes XIX. 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  127. 2017
  128. Published

    Optimization of Mechanical Properties of Glass-Spheres-Filled Polypropylene Composites for Extrusion-Based Additive Manufacturing

    Spörk, M., Savandaiah, C., Arbeiter, F., Sapkota, J. & Holzer, C., 26 Dec 2017, In: Polymer Composites. 40.2019, 2, p. 638-651 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  129. Published

    Special Binder Systems for Metal Powders in Highly Filled Filaments for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Cano Cano, S., Ecker, J., Arbeiter, F., Burkhardt, C., Hampel, S., Kukla, C. & Holzer, C., 14 Dec 2017, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  130. Published

    Special Binder Systems for the Use with Metal Powders for Highly Filled Filaments for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Kukla, C., Arbeiter, F. & Holzer, C., 14 Dec 2017, 33rd Annual Meeting of the Polymer Processing Society. Cancun, Mexico, Vol. 33. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  131. Published

    Experimental methods to characterize the nonlinear elastic plastic fracture behaviour of polymers, as a starting point for the description of multi-layered structures

    Gosch, A., Arbeiter, F. & Pinter, G. G., 10 Sept 2017.

    Research output: Contribution to conference › Abstract

  132. Published

    Material behavior of carboxylated nitrile butadiene rubber (XNBR) in dependence on crosslinker and medium

    Fleischmann, D. D., Arbeiter, F., Schlögl, S. & Kern, W., 5 Sept 2017.

    Research output: Contribution to conference › Poster › Research

  133. E-pub ahead of print

    Shrinkage and Warpage Optimization of Expanded-Perlite-Filled Polypropylene Composites in Extrusion-Based Additive Manufacturing

    Spörk, M., Sapkota, J., Weingrill, G., Fischinger, T., Arbeiter, F. & Holzer, C., 4 Jul 2017, (E-pub ahead of print) In: Macromolecular materials and engineering. 302.2017, 10, 13 p., 1700143.

    Research output: Contribution to journal › Article › Research › peer-review

  134. E-pub ahead of print

    Parametric optimization of intra- and inter-layer strengths in parts produced by extrusion-based additive manufacturing of poly(lactic acid)

    Spörk, M., Arbeiter, F., Cajner, H., Sapkota, J. & Holzer, C., 26 Jun 2017, (E-pub ahead of print) In: Journal of Applied Polymer Science. 134.2017, 41, 15 p., 45401.

    Research output: Contribution to journal › Article › Research › peer-review

  135. Published

    FILLER CONTENT AND PROPERTIES OF HIGHLY FILLED FILAMENTS FOR FUSED FILAMENT FABRICATION OF MAGNETS

    Gonzalez-Gutierrez, J., Duretek, I., Arbeiter, F., Kukla, C. & Holzer, C., 9 May 2017, ANTEC® 2017. Anaheim, California, USA, 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  136. Published

    Influence of long-term annealing on residual stress distribution and quasi-brittle failure properties of talcum reinforced pipe grade polypropylene

    Arbeiter, F., Pinter, G. & Frank, A., 9 May 2017.

    Research output: Contribution to conference › Paper › peer-review

  137. Published

    Characterization of slow crack growth resistance of polyethylene pipe grades with cyclic cracked round bar (CRB) test in correlation to strain hardening (SH) test

    Berger, I. J., Frank, A., Arbeiter, F. & Pinter, G., 8 May 2017.

    Research output: Contribution to conference › Paper › peer-review

  138. Published

    The Cyclic Cracked Round Bar Test as a new standard for accelerated material ranking of polyethylene pipe grades

    Frank, A., Berger, I. J., Arbeiter, F. & Pinter, G., 8 May 2017.

    Research output: Contribution to conference › Paper › peer-review

  139. Published

    Properties of glass filled polypropylene for Fused Filament Fabrication

    Spörk, M., Savandaiah, C., Arbeiter, F., Schuschnigg, S. & Holzer, C., May 2017.

    Research output: Contribution to conference › Paper › peer-review

  140. Published

    Fracture mechanics methods to assess the lifetime of thermoplastic pipes

    Arbeiter, F., Pinter, G., Lang, R. W. & Frank, A., 2017, Springer Series in Materials Science. Springer Berlin, Vol. 247. p. 33-54 22 p. (Springer Series in Materials Science; vol. 247).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  141. Published

    Influence of long-term annealing on residual stress distribution and quasi-brittle failure properties of talcum reinforced pipe grade polyproyplene

    Arbeiter, F. J., Pinter, G. & Frank, A., 2017, 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017. Vol. 2017-May. p. 1989-1993 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  142. 2016
  143. Published

    Cranial Polypropylene Implants by Fused Filament Fabrication

    Katschnig, M., Arbeiter, F., Haar, B., von Campe, G. & Holzer, C., 2 Dec 2016, In: Advanced engineering materials. 19.2017, 4, 5 p., 1600676.

    Research output: Contribution to journal › Article › Research › peer-review

  144. Published

    Influence of molecular structure and reinforcement on fatigue behavior of tough polypropylene materials

    Arbeiter, F., Frank, A. & Pinter, G. G., 10 Oct 2016, In: Journal of Applied Polymer Science. 133.2016, 38, 16 p., 43948.

    Research output: Contribution to journal › Article › Research › peer-review

  145. Published

    Bonding Forces in Fused Filament Fabrication

    Spörk, M., Schuschnigg, S., Holzer, C., Arbeiter, F. & Berger, G., 23 Sept 2016.

    Research output: Contribution to conference › Abstract › peer-review

  146. Published

    Fast comparison of different polymeric pipe materials: Extending the use of the cyclic CRB-Test (ISO 18489)

    Arbeiter, F., 14 Sept 2016. 1 p.

    Research output: Contribution to conference › Presentation › Research

  147. Published

    Lifetime Prediction of PE100 and PE100 RC Pipes based on Slow Crack Growth Resistance

    Frank, A., Berger, I. J., Hutař, P., Arbeiter, F. & Pinter, G., 14 Sept 2016, Proceedings of the 18th Plastic Pipes Conference. Plastics Pipes Conference Association, Vol. 18. 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  148. Published

    POLYPROPYLENE MULTI-LAYER-PIPES - 100 YEAR LIFETIME ASSESSMENT USING LINEAR ELASTIC FRACTURE MECHANICS

    Pappler, U., Arbeiter, F. & Pinter, G., 14 Sept 2016, Proceedings of the 18th Plastic Pipes Conference . Plastics Pipes Conference Association, Vol. 18. 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  149. Published

    FAST COMPARISON OF DIFFERENT POLYMERIC PIPE MATERIALS: EXTENDING THE USE OF THE CYCLIC CRBTEST (ISO 18489)

    Arbeiter, F., Pinter, G. & Frank, A., Sept 2016, Proceedings of the 18th Plastic Pipes Conference. Plastics Pipes Conference Association, Vol. 18. 10 p. 118

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  150. E-pub ahead of print

    Fracture toughness of high density polyethylene: Fatigue pre-cracking versus femtolaser, razor sharpening and broaching

    Salazar, A., Rodríguez, J., Arbeiter, F., Pinter, G. G. & Martínez, A. B., 13 Jul 2016, (E-pub ahead of print) In: Engineering Fracture Mechanics. 149.2015, November, p. 199-213 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  151. Published

    Multi-layer sewer pipes: long-term performance and influence of artificial ageing

    Arbeiter, F., 21 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  152. 2015
  153. Published

    On crack propagation in the welded polyolefin pipes with and without the presence of weld beads

    Mikula, J., Hutař, P., Nezbedová, E., Lach, R., Arbeiter, F., Ševčík, M., Pinter, G., Grellmann, W. & Náhlík, L., 15 Dec 2015, In: Materials & design. 87, p. 95-104 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  154. Published

    The Cyclic CRB Test – A Quick Test for Assessing Long Term Fracture Behaviour of Polymers

    Pinter, G., Arbeiter, F., Berer, M., Schrittesser, B. & Frank, A., 25 Sept 2015, PPS 2015 - Book of Abstracts. p. 104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  155. Published

    Optimization of the Long Term Performance of Pipes by Multilayer Build Ups

    Arbeiter, F., Ševčík, M., Hutař, P., Feuchter, M., Bruckmoser, K. & Pinter, G., 23 Sept 2015, PPS 2015 - Book of Abstracts. p. 134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  156. Published

    The Cyclic CRB Test - A Quick Test for Assessing the Long Term Fracture Behaviour of Polymers

    Pinter, G., Arbeiter, F., Berer, M., Schrittesser, B. & Frank, A., 23 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  157. Published

    Optimization of the Long Term Performance of Pipes by Multilayer Build Ups

    Arbeiter, F., Sevcik, M., Hutař, P., Feuchter, M., Bruckmoser, K. & Pinter, G., 22 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  158. Published

    Cyclic tests on cracked round bars as a quick tool to assess the long term behaviour of thermoplastics and elastomers

    Arbeiter, F., Schrittesser, B., Frank, A., Berer, M. & Pinter, G., 3 Jun 2015, In: Polymer Testing. 45, p. 83-92 10 p., 4441.

    Research output: Contribution to journal › Article › Research › peer-review

  159. Published

    Damage propagation in reinforced pipe grade polypropylene under fatigue loads

    Arbeiter, F., Schwab, M., Pinter, G. & Frank, A., 21 May 2015.

    Research output: Contribution to conference › Poster › Research

  160. Published

    Investigation of interface properties of polypropylene multi-layer pipes via Raman-spectroscopy and X-ray scattering techniques

    Feuchter, M., Bruckmoser, K., Arbeiter, F. & Pinter, G., 21 May 2015.

    Research output: Contribution to conference › Poster › Research

  161. Published

    Beschleunigte Werkstoffqualifizierung mit dem zyklischen CRB-Test

    Frank, A., Berger, I., Arbeiter, F. & Pinter, G., Apr 2015, In: 3 R. 04-05 2015, p. 74-80

    Research output: Contribution to journal › Article › Research

  162. Published

    Linear elastic fracture mechanics: a useful tool for lifetime estimation of structures made from thermoplastic polymers

    Arbeiter, F., Berer, M. & Pinter, G., 30 Mar 2015.

    Research output: Contribution to conference › Poster › Research

  163. Published

    Evaluation of long-term properties of polymeric pipe grade materials using fatigue tests and fracture mechanics

    Arbeiter, F., 2015

    Research output: Thesis › Doctoral Thesis

  164. 2014
  165. Published

    Definition of stress intensity factor development and determination of crack growth kinetics in multi layer polypropylene pipes

    Arbeiter, F., Hutař, P., Pinter, G. & Frank, A., 17 Sept 2014.

    Research output: Contribution to conference › Presentation › Research

  166. Published

    Fracture toughness of high density polyethylene: Fatigue precracking versus femtolaser, razor sharpening and broaching

    Salazar, A., Rodriguez, J., Arbeiter, F., Pinter, G. & Martínez, A. B., 17 Sept 2014.

    Research output: Contribution to conference › Presentation › Research

  167. Published

    Untersuchungen von stumpfgeschweißten PE-Rohren mit bruchmechanischen Methoden

    Arbeiter, F., 14 Jun 2014.

    Research output: Contribution to conference › Presentation › Research

  168. Published

    Bruchmechanische Methoden zur Abschätzung der Lebensdauer von thermoplastischen Rohrwerkstoffen

    Pinter, G., Frank, A. & Arbeiter, F., 2014, Tagungsband Polymertec 2014. p. 142-145

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  169. Published

    Characterisation of quasi-brittle fatigue crack growth in pipe grade polypropylene block copolymer

    Arbeiter, F., Pinter, G. & Frank, A., 2014, In: Polymer Testing. 37, p. 186-192

    Research output: Contribution to journal › Article › Research › peer-review

  170. Published

    Characterization of Crack Initiation and Slow Crack Growth Resistance of PE100 and PE100-RC pipe Grades with Cyclic Cracked Round Bar Tests

    Frank, A., Berger, I. J., Arbeiter, F. & Pinter, G., 2014, Proceedings of the 17 th Plastic Pipes Conference PPXVII. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  171. Published

    Correlation of Fracture Mechanics Based Lifetime Prediction and Internal Pipe Pressure Tests

    Pinter, G., Frank, A., Berger, I. J. & Arbeiter, F., 2014, Proceedings of the 17 th Plastic Pipes Conference PPXVII. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  172. Published

    Polypropylene Multi Layer Pipe Lifetime Assessment Under Realistic Loading Conditions

    Arbeiter, F., Ševčík, M., Pinter, G., Frank, A. & Hutar, P., 2014, Proceedings of the 17 th Plastic Pipes Conference PPXVII. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  173. Published

    Stiffness based fatigue characterisation of CFRP

    Brunbauer, J., Arbeiter, F., Stelzer, S. & Pinter, G., 2014, In: Advanced materials research. p. 166-171

    Research output: Contribution to journal › Article › Research › peer-review

  174. Published

    Stiffness based fatigue characterisation of CFRP

    Maier, J., Arbeiter, F., Stelzer, S. & Pinter, G., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  175. Published

    The effect of soil load on fracture behaviour of three-layer polymer pipe for non-pressurised applications

    Ševčík, M., Arbeiter, F., Hutar, P., Pinter, G. & Luboš, N., 2014, Key engineering materials. Vol. 627. p. 197-200 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  176. Published

    Untersuchungen von stumpfgeschweißten PE-Rohren mit bruchmechanischen Methoden

    Arbeiter, F., Pinter, G. & Frank, A., 2014, Tagungsband Polymertec 2014. p. 175-182

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  177. 2013
  178. Published

    Bruchmechanik an Grenzflächen - Lebensdauervorhersagekonzepte für mehrschichtige Kunststoffkomponenten

    Arbeiter, F., 14 Nov 2013.

    Research output: Contribution to conference › Presentation › Research

  179. Published

    Comparison of fracture times of PE-HD pressure pipes and PP-Multilayer pipes using linear elastic fracture mechanics

    Arbeiter, F., 9 Sept 2013.

    Research output: Contribution to conference › Presentation › Research

  180. Published

    Bruchmechanik an Grenzflächen - Lebensdauervorhersagekonzepte für mehrschichtige Kunststoffkomponenten

    Arbeiter, F., Pinter, G., Lach, R., Grellmann, W. & Hutar, P., 2013, 22. Leobener Kunststoff-Kolloquium: Oberflächen und Grenzflächen in der Polymertechnologie. p. 228-238

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  181. Published

    Comparison of crack growth kinetics in different polypropylene grades using linear elastic fracture mechanics

    Arbeiter, F., Pinter, G. & Frank, A., 2013, The Proceedings of The Austrian Slovenian Polymer Meeting 2013. p. 62-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  182. Published

    Comparison of crack growth kinetics in different polypropylene grades using linear elastic fracture mechanics

    Arbeiter, F., 2013.

    Research output: Contribution to conference › Presentation › Research

  183. Published

    IMPACT OF SINGLE AND DUAL PRESSURE BUTT-WELDING PROCEDURES ON THE RELIABILITY OF PE 100 PIPE WELDS

    Arbeiter, F., Pinter, G. & Frank, A., 2013, Proceedings of Eurotec 2013.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  184. Published

    Impact of varying between single and dual pressure butt-welding procedures for small scale pipes on short- and long-term fracture properties of PE 100 pipe welds

    Arbeiter, F., 2013.

    Research output: Contribution to conference › Presentation › Research

  185. Published

    Interface thickness determination of mineral reinforced multilayer polypropylene pipes using Raman spectroscopy

    Arbeiter, F., Bruckmoser, K. & Pinter, G., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  186. 2012
  187. Published

    Comparison of long-term-properties of polyolefin pipe grades using linear elastic fracture mechanics

    Arbeiter, F., Sept 2012.

    Research output: Contribution to conference › Presentation › Research

  188. Published

    Comparison of long-term-properties of polyolefin pipe grades using linear elastic fracture mechanics

    Arbeiter, F., Frank, A. & Pinter, G., 2012, proceedings of Plastic Pipes XVI Conference 2012. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  189. Published

    Kunststofftechnik Leoben: Rohrexpertise in Spanien Präsentiert

    Arbeiter, F., Pinter, G., Redhead, A. & Frank, A., 2012, In: VLK-News. p. 18-18

    Research output: Contribution to journal › Article › Research › peer-review

  190. Published

    Lifetime prediction of multi-layer polyolefin pipes

    Arbeiter, F. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  191. Published

    Thermische und optische Untersuchungen an mit INDUCON-Verfahren gefertigten Schweißnähten

    Arbeiter, F. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  192. 2011
  193. Published

    Morphologische Charakterisierung von Stumpfschweißverbindungen in Polyethylen-Rohrleitungen

    Arbeiter, F., 2011

    Research output: Thesis › Master's Thesis

View graph of relations

Contact

Phone: 2122

Curriculum vitae

Florian Arbeiter public CV

Latest Research Output

View more (178)