Clemens Holzer

51 - 100 out of 376Page size: 50

Research output

  1. 2021
  2. E-pub ahead of print

    Material extrusion additively manufactured alumina monolithic structures to improve the efficiency of plasma-catalytic oxidation of toluene

    Li, T., Gonzalez-Gutierrez, J., Raguz, I., Holzer, C., Li, M., Cheng, P., Kitzmantel, M., Shi, L. & Huang, L., 10 Nov 2021, (E-pub ahead of print) In: Additive Manufacturing. 37.2021, January, 9 p., 101700.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Influence of the Mold Material on the Injection Molding Cycle Time and Warpage Depending on the Polymer Processed

    Lucyshyn, T., Enffans D’Avernas, L. V. D. & Holzer, C., 21 Sept 2021, In: Polymers. 13.2021, 18, 16 p., 3196.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Thermal Conductive Polymer Compounds for Material Extrusion Additive Manufactured of Heat Sinks

    Holzer, C., Schuschnigg, S. & Cano Cano, S., 15 Sept 2021, 29th Leoben-Conference on Polymer Engineering & Science. p. 250 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Thermal conductive, electrically insulating polymer compounds using material extrusion additive manufacturing for electronic parts

    Holzer, C., Cano Cano, S., Schuschnigg, S. & Hentschel, L., 2 Sept 2021, p. 32-32. 1 p.

    Research output: Contribution to conference › Abstract

  6. Published

    Bending Properties of Lightweight Copper Specimens with Different Infill Patterns Produced by Material Extrusion Additive Manufacturing, Solvent Debinding and Sintering

    Gonzalez-Gutierrez, J., Cano Cano, S., Ecker, J. V., Kitzmantel, M., Arbeiter, F., Kukla, C. & Holzer, C., 6 Aug 2021, In: Applied Sciences : open access journal. 11, 16, 7262.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Powder content in powder extrusion moulding of tool steel: Dimensional stability, shrinkage and hardness

    Gonzalez-Gutierrez, J., Thompson, Y., Handl, D., Cano Cano, S., Schuschnigg, S., Felfer, P., Kukla, C., Holzer, C. & Burkhardt, C., 15 Jan 2021, In: Materials letters. 283, January 2021, 5 p., 128909.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Effect of backbone selection on the solvent debinding of metal injection moulding feedstocks

    Kukla, C., Cano, S., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 2021, Euro PM2021 Congress Proceedings. (Euro PM2021 Congress Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. 2020
  10. Published

    Processing Conditions of a Medical Grade Poly(Methyl Methacrylate) with the Arburg Plastic Freeforming Additive Manufacturing Process

    Hentschel, L., Kynast, F., Petersmann, S., Holzer, C. & Gonzalez-Gutierrez, J., 2 Nov 2020, In: Polymers. 12, 11, p. 1-15 15 p., 2677.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Factors Affecting the Properties of POM-based Feedstocks for Fused Filament Fabrication/FFF

    Kukla, C., Hentschel, L., Cano Cano, S., Kitzmantel, M., Holzer, C. & Gonzalez-Gutierrez, J., 5 Oct 2020. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  12. Published

    Eingliederung von Additiven Fertigungstechnologien in einen klinischen Prozess zur Herstellung von medizinischen Implantaten

    Hentschel, L., Gonzalez-Gutierrez, J. & Holzer, C., 1 Oct 2020, In: Jahresmagazin Kunststofftechnik : Ingenieurwissenschaften ... : im Fokus . 2020, p. 56-61

    Research output: Contribution to journal › Article › Research

  13. Published

    Biofunctional Glycol-Modified Polyethylene Terephthalate and Thermoplastic Polyurethane Implants by Extrusion-Based Additive Manufacturing for Medical 3D Maxillofacial Defect Reconstruction

    Katschnig, M., Wallner, J., Janics, T., Burgstaller, C., Zemann, W. & Holzer, C., 5 Aug 2020, In: Polymers. 12.2020, 8, 1751.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Additive Fertigung metallischer und keramischer Bauteile: Einsatz der Materialextrusion insbesondere der Verwendung von Filamenten für Sinterverfahren

    Kukla, C., Schuschnigg, S. & Holzer, C., Aug 2020, In: Industrie 4.0 Management. 36.2020, 4, p. 20-24 5 p.

    Research output: Contribution to journal › Article › Research

  15. Published

    Influence of the Infill Orientation on the Properties of Zirconia Parts Produced by Fused Filament Fabrication

    Cano Cano, S., Lube, T., Huber, P., Gallego, A., Naranjo, J. A., Berges, C., Schuschnigg, S., Herranz, G., Kukla, C., Holzer, C. & Gonzalez-Gutierrez, J., 15 Jul 2020, In: Materials. 13.2020, 14, 19 p., 3158.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Qualifizierung von Materialien für medizinische Anwendungen mittels des Arburg Freeformers

    Holzer, C., Hentschel, L., Kynast, F., Schuschnigg, S. & Gonzalez-Gutierrez, J., 15 May 2020. 2 p.

    Research output: Contribution to conference › Abstract

  17. Published

    Modification of Interfacial Interactions in Ceramic-Polymer Nanocomposites by Grafting: Morphology and Properties for Powder Injection Molding and Additive Manufacturing

    Cano Cano, S., Gooneie, A., Kukla, C., Rieß, G., Holzer, C. & Gonzalez-Gutierrez, J., 21 Feb 2020, In: Applied Sciences : open access journal. 10.2020, 4, 18 p., 1471.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Optimization of the 3D Printing Parameters for Tensile Properties of Specimens Produced by Fused Filament Fabrication of 17-4PH Stainless Steel

    Godec, D., Cano Cano, S., Holzer, C. & Gonzalez-Gutierrez, J., 8 Feb 2020, In: Materials. 13.2020, 3, 23 p., 774.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Development of new treatment methods for multi material textile waste

    Jenull-Halver, U., Holzer, C., Piribauer, B. & Quartinello, F., 10 Jan 2020, AIP Conference Proceedings 2205. 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Production of multimaterial components by material extrusion - Fused filament fabrication (ME-FFF)

    Kukla, C., Cano, S., Moritz, T., Müller-Köhn, A., Günther, A., Hampel, S. & Holzer, C., 2020, Euro PM 2018 Congress and Exhibition. (Euro PM 2018 Congress and Exhibition).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. 2019
  22. Published

    Destroying or Enhancing the Mechanical Properties of Carbon Fibre Filled PA12 filaments for Additive Manufacturing?

    Holzer, C., Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Arbeiter, F., Liu, D., Wuzella, G. H. & Lammer, H., 7 Nov 2019, p. 59-59. 1 p.

    Research output: Contribution to conference › Abstract › peer-review

  23. Published

    Influence of stearic acid in feedstocks for FFF and PIM

    Kukla, C., Cano Cano, S., Holzer, C. & Gonzalez-Gutierrez, J., 16 Oct 2019.

    Research output: Contribution to conference › Paper › peer-review

  24. E-pub ahead of print

    Material extrusion-based additive manufacturing of polypropylene: A review on how to improve dimensional inaccuracy and warpage

    Spörk, M., Holzer, C. & Gonzalez-Gutierrez, J., 15 Oct 2019, (E-pub ahead of print) In: Journal of applied polymer science. 137.2020, 12, 16 p., 48454.

    Research output: Contribution to journal › Review article › peer-review

  25. Published

    Steel parts produced by material extrusion additive manufacturing, solvent debinding and sintering

    Gonzalez-Gutierrez, J., Thompson, Y., Cano Cano, S., Felfer, P., Kukla, C. & Holzer, C., 30 Sept 2019, Materials Science and Technology 2019 Conference Proceedings. p. 264-266 3 p. 139-137130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Physical Foaming and Crosslinking of Polyethylene with Modified Talcum

    Kaltenegger-Uray, A., Rieß, G., Lucyshyn, T., Holzer, C. & Kern, W., 9 Sept 2019, In: Polymers. 11.2019, 9, 15 p., 1472.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Modified talcum as crosslinking agent for polyolefins

    Kaltenegger-Uray, A., Rieß, G., Lucyshyn, T., Holzer, C. & Kern, W., 26 Aug 2019, In: AIP Conference Proceedings. 2019, 2139, p. 1-5 5 p., 160001.

    Research output: Contribution to journal › Conference article › peer-review

  28. Published

    Mechanical Recyclability of Polypropylene Composites Produced by Material Extrusion-Based Additive Manufacturing

    Spörk, M., Arbeiter, F., Raguz, I., Holzer, C. & Gonzales-Gutierrez, J., 7 Aug 2019, In: Polymers. 11.2019, 8, 18 p., 1318.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Fused Filament Fabrication of Metals and Ceramics for Special Applications

    Cano Cano, S., Holzer, C., Gonzalez-Gutierrez, J., Kukla, C. & Schuschnigg, S., 1 Aug 2019, 9 ed. Leykam Buchverlag. 15 p. (Industrial Management; no. 9)

    Research output: Book/Report › Anthology › Research

  30. Published

    Post processing of polymeric cranial implants produced by material extrusion based additive manufacturing

    Holzer, C., Gonzalez-Gutierrez, J., Petersmann, S., Pichelmayer, M. & von Campe, G., 9 Jul 2019. 1 p.

    Research output: Contribution to conference › Abstract

  31. Published

    A trouble‐free first layer adhesion for polypropylene‐based materials in material extrusion‐based additive manufacturing

    Spörk, M., Gonzalez-Gutierrez, J., Lichal, C., Cajner, H., Berger-Weber, G., Schuschnigg, S., Cardon, L. & Holzer, C., 31 May 2019, p. 327. 1 p.

    Research output: Contribution to conference › Abstract

  32. Published

    Debinding behaviour of feedstock for material extrusion additive manufacturing of zirconia

    Kukla, C., Cano Cano, S., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 15 May 2019, In: Powder Metallurgy. 2019, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Cell Morphology on Poly(methyl methacrylate) Microstructures as Function of Surface Energy

    Katschnig, M., Maroh, B., Andraschek, N., Schlögl, S., Zefferer, U., Bock, E., Leitinger, G., Trattnig, C., Kaufmann, M., Balika, W., Holzer, C., Schäfer, U., Patz, S. & Schlögl, S., 2 May 2019, In: International journal of biomaterials . 2019, p. 2019 12 p., Article ID 2393481.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Aktuelle Entwicklungen in der Simulation des Pulverspritzgießprozesses

    Lucyshyn, T., Hubmann, M., Duretek, I. & Holzer, C., 25 Apr 2019, Simulation in der Kunststofftechnik. Schuecker, C. (ed.). Leoben, Vol. Band 9. p. 101-103 3 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Rheological behaviour of highly-filled polymers for Metal Injection Moulding

    Kukla, C., Slemenik Perše, L., Bek, M., Gonzalez-Gutierrez, J. & Holzer, C., 9 Apr 2019. 1 p.

    Research output: Contribution to conference › Poster › Research

  36. Published

    Rheological behaviour of highly-filled polymers for Metal Injection Moulding

    Bek, M., Gonzalez-Gutierrez, J., Slemenik Perše, L., Holzer, C. & Kukla, C., 8 Apr 2019, p. 117-117. 1 p.

    Research output: Contribution to conference › Abstract

  37. Published

    Tensile properties of sintered 17-4PH stainless steel fabricated by material extrusion additive manufacturing

    Gonzalez-Gutierrez, J., Arbeiter, F., Schlauf, T., Kukla, C. & Holzer, C., 8 Apr 2019, In: Materials letters. 248.2019, 1 August, p. 165-168 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Additive manufacturing of zirconia parts by fused filament fabrication and solvent debinding: Selection of binder formulation

    Cano Cano, S., Gonzalez-Gutierrez, J., Sapkota, J., Spörk, M., Arbeiter, F., Schuschnigg, S., Holzer, C. & Kukla, C., 1 Mar 2019, In: Additive Manufacturing. 26.2019, March, p. 117–128 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Crosslinked polyolefins using a modified filler

    Kaltenegger-Uray, A., Rieß, G., Lucyshyn, T., Holzer, C. & Kern, W., 6 Feb 2019, In: AIP Conference Proceedings. 2019, 2065, 5 p., 030051.

    Research output: Contribution to journal › Article › Research › peer-review

  40. 2018
  41. Published

    Additive Fertigung von metallischen und keramischen Produkten mittels Filamentextrusion

    Holzer, C., 23 Oct 2018, p. 72-75. 4 p.

    Research output: Contribution to conference › Paper › peer-review

  42. Published

    Design and fabrication of monolithic catalyst for plasma-catalytic oxidation of toluene

    Huang, L., Zheng, M., Jiang, W., Shi, L., Gonzalez-Gutierrez, J. & Holzer, C., 20 Oct 2018. 1 p.

    Research output: Contribution to conference › Abstract

  43. Published

    Rheology of Highly Filled Polymers

    Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 3 Oct 2018, Polymer Rheology. Rivera-Armenta, J. L. & Salazar-Cruz, B. A. (eds.). London, United Kingdom, p. 153- 173 21 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  44. Published

    The consequences of different printing chamber temperatures in extrusion-based additive manufacturing

    Spörk, M., Arbeiter, F., Raguz, I., Traxler, G., Schuschnigg, S., Cardon, L. & Holzer, C., 21 Sept 2018.

    Research output: Contribution to conference › Paper › peer-review

  45. Published

    Influence of filler types onto the viscosity of highly filled polymers.

    Kukla, C., Slemenik Perše, L., Bek, M., Gonzalez-Gutierrez, J. & Holzer, C., 19 Sept 2018, International Conference on Polymers and Moulds Innovations: Conference Proceedings. Pontes, A. (ed.). Guimaraes, Portugal, Vol. 8. 6 p. P120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Anisotropic properties of oriented short carbon fibre filled polypropylene parts fabricated by extrusion-based additive manufacturing

    Spoerk, M., Savandaiah, C., Arbeiter, F., Traxler, G., Cardon, L., Holzer, C. & Sapkota, J., 11 Jun 2018, In: Composites Part A: Applied Science and Manufacturing. 113.2018, October, p. 95-104 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Adhesion of standard filament materials to different build platforms in material extrusion additive manufacturing

    Schuschnigg, S., Gonzalez-Gutierrez, J., Spörk, M., Sapkota, J. & Holzer, C., 21 May 2018, 34 th International Conference of the Polymer Processing society. Liu, S.-J. (ed.). Taipei, Taiwan, Vol. 34. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives

    Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Kukla, C., Sapkota, J. & Holzer, C., 18 May 2018, In: Materials. 11.2018, 5, 36 p., 840.

    Research output: Contribution to journal › Literature review › peer-review

  49. Published

    Polypropylene Filled With Glass Spheres in Extrusion‐Based Additive Manufacturing: Effect of Filler Size and Printing Chamber Temperature

    Spörk, M., Arbeiter, F., Raguž, I., Weingrill, G., Fischinger, T., Traxler, G., Schuschnigg, S., Cardon, L. & Holzer, C., 16 May 2018, In: Macromolecular materials and engineering. 303.2018, 7, 15 p., 1800179.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Optimisation of the Adhesion of Polypropylene-Based Materials during Extrusion-Based Additive Manufacturing

    Spörk, M., Gonzalez-Gutierrez, J., Lichal, C., Cajner, H., Berger, G., Schuschnigg, S., Cardon, L. & Holzer, C., 2 May 2018, In: Polymers. 10.2018, 5, 16 p., 490.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Cranial polyetheretherketone implants by extrusion–based additive manufacturing: state of the art and prospects

    Katschnig, M. & Holzer, C., 1 May 2018, In: Material Science & Engineering International Journal. 2.2018, 3, p. 66-68 3 p.

    Research output: Contribution to journal › Review article › peer-review

  52. Published

    Influence of filler treatment on the behavior of blast furnace slag filled polypropylene compounds

    Mostafa, A., Lucyshyn, T., Holzer, C., Flachberger, H., Öfner, W., Rieß, G. & Fritz, B., 23 Apr 2018, In: Journal of Applied Polymer Science. 135.2018, 31, p. 1-9 9 p., 46535.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Entwicklungen im Bereich Fused Filament Fabrication

    Schuschnigg, S., Spörk, M. & Holzer, C., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben: Eigenverlag, Vol. 27. p. 19-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Feedstocks for the Shaping-Debinding-Sintering Process of Multi Material Components

    Cano Cano, S., Kukla, C., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 19 Apr 2018, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

Previous 1 2 3 4 5 6 7 8 Next
View graph of relations

Contact

Phone: 3500

Latest Research Output

View more (376)