Christof Sommitsch

(Former)

51 - 100 out of 126Page size: 50

Research output

  1. 2007
  2. Published

    Creep-fatigue of multi-part container during hot extrusion of copper – Simulation and experimental comparison

    Krumphals, F., Wlanis, T., Sommitsch, C. & Redl, C., 2007, In: Computer methods in materials science. 7, p. 47-53

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Entwicklung der Gefügestruktur und Beurteilung der effektiven Dehnung bei der Warmumformung

    Candic, M., Tian, B., Kelber, S. & Sommitsch, C., 2007, XXVI. Verformungskundliches Kolloquium. p. 151-157

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Experimentelle Validierung von FEM-Rechnungen zur Spannungs- und Temperaturanalyse von Werkzeugen beim Kupfer-Strangpressen

    Krumphals, F., Wlanis, T., Planitzer, F. & Sommitsch, C., 2007, Experimentelle Validierung von FEM-Rechnungen zur Spannungs- und Temperaturanalyse von Werkzeugen beim Kupfer-Strangpressen. p. 65-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    FE-Modelling of the Cross-Rolling-Piercing Process with Discher Discs

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2007, 2nd International Conference Simuation and Modelling of Metallurgical Processes in Steelmaking. p. 313-317

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Finite-Elemente-Analyse der Reibungsbedingungen beim Schrägwalzen mit Diescherscheiben

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2007, Seminar "Rohrherstellung und -verarbeitung. p. 59-69

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Finite-Elemente-Modellierung des Schrägwalzens

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2007, In: Berg- und hüttenmännische Monatshefte : BHM. 152, p. 205-211

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Gekoppelte physikalische und numerische Simulation zur Optimierung von thermo-mechanischen Umformprozessen

    Sommitsch, C. & Buchmayr, B., 2007, Workshop "Moderne thermomechanische Prozessstrategien in der Stahlumformung" (Stahlzentrum VDEh), Düsseldorf. p. 89-99

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Hot forming and heat treatment simulation in a steel mill

    Redl, C., Tian, B., Wieser, V., Sommitsch, C. & Wlanis, T., 2007, In: Computer methods in materials science. 7, p. 47-53

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Interaction of Recrystallization and Precipitation during Hot Forming of Alloy 80 A

    Sommitsch, C., Pölt, P., Rüf, G., Mitsche, S. & Albu, M., 2007, In: Materials Science Forum . p. 2988-2993

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Investigation of Retained Strains during Multipass Deformation

    Candic, M., Tian, B., Kleber, S., Wiesner, M. & Sommitsch, C., 2007, In: Materials Science Forum . 558-559, p. 485-490

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Modelling of creep fatigue in containers during aluminium and copper extrusion

    Sommitsch, C., Sievert, R., Wlanis, T., Günther, B. & Wieser, V., 2007, In: Computational materials science. 39, p. 55-64

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    On the interaction of ductile damage and materials softening of a Ni-base alloy during hot deformation

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 1146-1155

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    On the retained strain during multipass hot deformation for the austenitic stainless steel 304 L

    Candic, M., Tian, B., Kleber, S., Wießner, M. & Sommitsch, C., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Optical Surface Analysis of Steel during Hot Compression: A Test to Determine Crack Initiation

    Pschera, R., Winter, G. & Sommitsch, C., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    Recrystallization behaviour of the nickel-based alloy 80 A during hot forming

    Mitsche, S., Poelt, P. & Sommitsch, C., 2007, In: Journal of microscopy. 227, p. 267-274

    Research output: Contribution to journal › Article › Research › peer-review

  17. 2006
  18. Published

    Creep fatigue in extrusion dies - modelling and simulation

    Sommitsch, C., Wlanis, T., Hatzenbichler, T. & Wieser, V., 2006, In: Steel grips : journal of steel and related materials. 4, p. 51-55

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Creep fatigue of multi-part container during hot extrusion of copper - simulation and experimental comparison

    Wlanis, T., Krumphals, F., Sommitsch, C. & Wieser, V., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Die hoch hinaus wollen

    Sommitsch, C., 2006, In: Wirtschafts-Blatt : Österreichs unabhängige Tageszeitung für Wirtschaft & Finanzen. p. 10-11

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Dynamic recrystallization of NI-base alloys-Experimental results and comparisons with simulations

    Poelt, P., Sommitsch, C., Mitsche, S. & Walter, M., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 306-314

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Ein Stoff für alle Härtefälle

    Harlfinger, J. & Sommitsch, C., 2006, In: Der Standard : Österreichs unabhängige Tageszeitung für Wirtschaft, Politik und Kultur. p. 9-9

    Research output: Contribution to journal › Article › Transfer › peer-review

  23. Published

    Investigation and numerical modelling of extrusion tool life time

    Redl, C., Wieser, V., Sommitsch, C., Wlanis, T., Schützenhöfer, W., Gaudin, S. & Geigges, B., 2006, Proceedings of 7th International Tooling Conference, M. Rosso, M. A. Grande, D. Uguespp (Eds.),. p. 589-596

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Investigations on fracture of a Ni-base alloy at elevated temperatures by continuum damage mechanics

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2006, Proceedings of the 9th International Conference on Material Forming, ESAFORM. p. 175-178

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Lehrstuhl für Umformtechnik

    Buchmayr, B., Harrer, O.-K. & Sommitsch, C., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 271-275

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Modellierung der duktilen Schädigung einer Nickelbasislegierung unter Berücksichtigung der Werkstoffentfestigung bei der Warmumformung

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2006, XXV. Verformungskundliches Kolloquium,. p. 167-183

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Modellierung der duktilen Schädigung während der Warmumformung

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    Modellierung des Aluminium- und Kupfer-Strangpressens unter dem Aspekt der Lebensdauervorhersage der Werkzeuge und Rezipienten – Teil 2

    Sommitsch, C., Wlanis, T., Krumphals, F. & Planitzer, F., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Modelling ductile damage of a Ni-base alloy considering the microstructure evolution during hot working

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2006, In: Steel grips : journal of steel and related materials. 4, p. 56-63

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Modelling of creep-fatigue in extrusion dies

    Sommitsch, C., Wlanis, T. & Wieser, V., 2006, XXV. Verformungskundliches Kolloquium. p. 193-203

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    On modelling of dynamic recrystallisation of fcc materials with low stocking fault energy

    Sommitsch, C. & Mitter, W., 2006, In: Acta materialia. p. 357-375

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    On the modelling of the interaction of materials softening and ductile damage during hot working of Alloy 80A

    Sommitsch, C., Pölt, P., Rüf, G. & Mitsche, S., 2006, In: Journal of materials processing technology. 177, p. 282-286

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Quantitative Metallography

    Mitsche, S., Pölt, P. & Sommitsch, C., 2006, In: GIT imaging & microscopy. 1, p. 38-39

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Radial forging of a nickel base alloy at different temperatures

    Harrer, O.-K., Wallner, S., Wieser, V. & Sommitsch, C., 2006, In: Steel grips : journal of steel and related materials. 4, p. 356-360

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Recrystallization behaviour of the nickel based alloy 80A during hot forming

    Mitsche, S., Sommitsch, C., Pölt, P. & Kleber, S., 2006, Proceedings of the 13th Conference and Workshop on Electron Backscatter Diffraction, Royal Microscopical Society (RMS). p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Simulation der Gefügeentwicklung beim Stabwalzen von Rippenstahl

    Sommitsch, C., Fohringer, H., Jahn, A., Stöckl, C. & Buchmayr, B., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 344-349

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Simulation der Temperatur- und Gefügeentwicklung beim Stabwalzen von BSt 550

    Sommitsch, C. & Buchmayr, B., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  38. Published

    Systematische Bestimmung des rekristallisierten Gefügeanteiles einer Nickelbasislegierung in Abhängigkeit vom Verformungsgrad

    Mitsche, S., Sommitsch, C. & Poelt, P., 2006, Sonderbände der praktischen Metallographie. p. 43-50

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  39. 2005
  40. Published

    A fracture mechanics investigation on crack growth in massive forming

    Trattnig, G., Sommitsch, C. & Pippan, R., 2005, In: Materials Science Forum . p. 339-342

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Blechprüfung

    Sommitsch, C. & Buchmayr, B., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Comparison of fracture criteria at high temperatures for nickel-based alloys

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2005, Steelsim 2005. p. 575-588

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Development of microstructure in forging alloy 718

    Harrer, O.-K., Sommitsch, C., Wallner, S. & Wieser, V., 2005, Steelsim 2005. p. 463-471

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Ductile fracture analysis with damage models of effective stresses at high temperatures

    Sommitsch, C. & Rüf, G., 2005, 8th ICTP 2005. p. 327-328

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Dynamische Rekristallisation von Nickelbasis-Legierungen, Bildanalytische Methoden und EBSD

    Sommitsch, C., Poelt, P., Mitsche, S. & Walter, M., 2005, Sommerschule Steiermark. p. 113-125

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Entwicklung eines Warmstauchversuchs als Grundlage für die Beschreibung des Schädigungsverhaltens einer Nickel-Basis-Superlegierung

    Rüf, G., Sommitsch, C. & Buchmayr, B., 2005, XXIV. Verformungskundliches Kolloquium. p. 139-155

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Gefügemodelle für die Warmformgebung

    Sommitsch, C. & Buchmayr, B., 2005, Freiberger Forschungsforum, 56. Berg- und Hüttenmännischer Tag. p. 16-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Microstructure Simulation in Radial Forging of Nickel Base Alloys

    Harrer, O.-K., Sommitsch, C., Wallner, S. & Wieser, V., 2005, The 8th ESAFORM Conference on Material Forming. p. 515-518

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    On the determination of the recrystallised fraction during hot forming

    Sommitsch, C., Walter, M., Kleber, S., Pölt, P. & Mitsche, S., 2005, In: Steel grips : journal of steel and related materials. 3, p. 287-293

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Optimized rod rolling to achieve desired mechanical properties

    Sommitsch, C., Roveda, M., Gaudenzi, N. & Buchmayr, B., 2005, Steelsim 2005. p. 407-419

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Report III on the simulation of ORI MARTIN rod rolling mill

    Sommitsch, C. & Buchmayr, B., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. Published

    Report II on the simulation of ORI MARTIN rod rolling mill

    Sommitsch, C. & Buchmayr, B., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  53. Published

    Report IV on the simulation of ORI MARTIN rod rolling mill

    Sommitsch, C. & Buchmayr, B., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (126)