Christina Scheu

(Former)

Research output

  1. 2008
  2. Published

    Zum Kurzzeitkriechverhalten von Warmarbeitsstählen

    Stergar, E., Panzenböck, M., Leitner, H., Wurmbauer, H., Scheu, C. & Clemens, H., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. p. 342-346

    Research output: Contribution to journalArticleResearchpeer-review

  3. 2007
  4. Published

    A Comparison of the Electronic Structure of N-K in TiN and VN using EELS and ab-initio Calculations

    Rashkova, B., Kothleitner, G., Sturm, S., Scheu, C., Kutschej, K., Mitterer, C., Lazar, P., Redinger, J., Podloucky, R. & Dehm, G., 2007, Microscopy and Microanalysis. p. 414-415

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  5. Published

    Characteristics of an Optimised Active Metal Cast Joint between Copper and C/C

    Schedler, B., Huber, T., Friedrich, T., Eidenberger, E., Kapp, M., Scheu, C., Pippan, R. & Clemens, H., 2007, In: Physica scripta. T128, p. 200-2003

    Research output: Contribution to journalArticleResearchpeer-review

  6. Published

    Combination of ab-initio and N-K, Ti-L2,3, V-L2,3 electron energy-loss near edge structure studies for TiN and VN films

    Rashkova, B., Lazar, P., Redinger, J., Podloucky, R., Kothleitner, G., Sturm, S., Kutschej, K., Mitterer, C., Scheu, C. & Dehm, G., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 98, p. 1060-1065

    Research output: Contribution to journalArticleResearchpeer-review

  7. Published

    Control of bonding and epitaxy at copper/sapphire interface

    Oh, S. H., Scheu, C., Wagner, T. & Rühle, M., 2007, In: Applied physics letters. 91, p. 141912-1-141912-3

    Research output: Contribution to journalArticleResearchpeer-review

  8. Published

    Examination of C/C flat tile mock-ups with hypervapotron cooling after high heat flux testing

    Schedler, B., Friedrich, T., Traxler, H., Eidenberger, E., Scheu, C., Clemens, H., Pippan, R. & Escourbiac, F., 2007, In: Fusion engineering and design. 82, p. 299-305

    Research output: Contribution to journalArticleResearchpeer-review

  9. Published

    First observation of a hexagonal close packed metastable intermetallic phase between Cu and Al bilayer films

    Cha, L., Scheu, C., Richter, G., Wagner, T., Sturm, S. & Rühle, M., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 98, p. 692-699

    Research output: Contribution to journalArticleResearchpeer-review

  10. Published

    Formation and modulation of an ultrafine lamellar structure in high Nb containing TiAl alloys

    Cha, L., Scheu, C., Chladil, H., Bartels, A., Gerling, R. & Clemens, H., 2007.

    Research output: Contribution to conferencePosterResearchpeer-review

  11. Published

    Gefügecharakterisierung eines Warmarbeitsstahls mit martensitisch-bainitschem Mischgefüge

    Mayer, S., Pölzl, S., Hawranek, G., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2007, In: Practical metallography = Praktische Metallographie. p. 182-192

    Research output: Contribution to journalArticleResearchpeer-review

  12. Published

    Herstellung lamellarer Gefügetypen in intermetallischen TiAl-Legierungen und deren Charakterisierung

    Schnitzer, R., Chladil, H., Scheu, C., Clemens, H., Bystrzanowski, S., Bartels, A. & Kremmer, S., 2007, In: Practical metallography = Praktische Metallographie. 44, p. 430-443

    Research output: Contribution to journalArticleResearchpeer-review

  13. Published

    Influence of the Cooling Rate on the Mechanical Properties of a Hot-work Tool Steel

    Mayer, S., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2007, In: Berg- und hüttenmännische Monatshefte : BHM. 152, p. 132-136

    Research output: Contribution to journalArticleResearchpeer-review

  14. Published

    Methods to Determine the Joint Strength of C/C to Copper Joints

    Schedler, B., Huber, T., Eidenberger, E., Scheu, C., Pippan, R. & Clemens, H., 2007, In: Fusion engineering and design. 82, p. 1786-1792

    Research output: Contribution to journalArticleResearchpeer-review

  15. Published

    Mikrostruktur einer C/C-CU Verbindung für Erste-Wand-Komponenten des ITER

    Eidenberger, E., Scheu, C., Hawranek, G., Leitner, H., Clemens, H., Pippan, R. & Schedler, B., 2007, In: Practical metallography = Praktische Metallographie. 44, p. 403-412

    Research output: Contribution to journalArticleResearchpeer-review

  16. Published

    Nanocomposite CrC/a-C:H coatings for automative applications

    Mitterer, C., Gassner, G., Scheu, C., Lechtahler, M., Mayrhofer, P. H. & Daniel, R., 2007, 34 th International Conference on Metallurgical Coatings and Thin Films. p. 113-113

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  17. Published

    Nonreactive Spreading at High Temperature: Molten Metals and Oxides on Molybdenum

    Saiz, E., Tomsia, A. P., Rauch, M., Scheu, C., Rühle, M., Benhassine, M., Seveno, D., Coninck, J. D. & Lopez-Esteban, S., 2007, In: Physical review : E, Statistical, nonlinear and soft matter physics. p. 041602-1-041602-15

    Research output: Contribution to journalArticleResearchpeer-review

  18. Published

    SANS Characterisation of nm-sized Precipitates in a Martensitic Fe-Co-Mo Alloy

    Eidenberger, E., Schober, M., Staron, P., Caliskanoglu, D., Leitner, H., Scheu, C. & Clemens, H., 2007.

    Research output: Contribution to conferencePosterResearchpeer-review

  19. Published

    Spin-misalignment scattering in a precipitation-hardened steel

    Eidenberger, E., Bischof, M., Staron, P., Leitner, H., Michels, A., Granitzer, P., Rumpf, K., Scheu, C. & Clemens, H., 2007.

    Research output: Contribution to conferencePosterResearchpeer-review

  20. Published

    Structure Models of Massively Transformed High Niobium Containing TiAl Alloys

    Scheu, C., Cha, L., Sturm, S., Chladil, H., Mayrhofer, P. H., Clemens, H., Wolf, W. & Podloucky, R., 2007, MRS Fall Meeting. Materials Research Society : MRS, p. II05-01-II05-06

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  21. Published

    Synthesis of ab-initio and N-K, Ti-L2,3, V-L2,3 electron energy-loss near edge structure studie for TiN and VN films

    Rashkova, B., Lazar, P., Redinger, J., Podloucky, R., Kothleitner, G., Sturm, S., Kutschej, K., Mitterer, C., Scheu, C. & Dehm, G., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 98, p. 1060-1065

    Research output: Contribution to journalArticleResearchpeer-review

  22. Published

    The Influence of Spin-misalignment Scattering on the SANS Data Evolution of Martensitic Age-hardening Steels

    Bischof, M., Staron, P., Michels, A., Granitzer, P., Rumpf, K., Leitner, H., Scheu, C. & Clemens, H., 2007, In: Acta materialia. 55, p. 2637-2646

    Research output: Contribution to journalArticleResearchpeer-review