Christian Bernhard

251 - 290 out of 290Page size: 50

Research output

  1. 2007
  2. Published

    Experimental Simulation of Defect Formation in the Continuous Casting Process

    Bernhard, C., Pierer, R., Tubikanec, A. & Chimani, C., 2007, SMEA Conference on the Effect of Melting, Refining and Casting on Product Quality and Properties. p. Session II-Paper 2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Numeric Modelling of the Heat Transfer in the Continuous Casting Mould

    Michelic, S., Bernhard, C. & Pierer, R., 2007, Numeric Modelling of the Heat Transfer in the Continuous Casting Mould. p. 209-215

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Simulation of austenite grain growth in continuous casting

    Bernhard, C., Reiter, J. & Presslinger, H., 2007, AISTEch2007. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Über Zusammenhang zwischen Prozess und Produktqualität beim Stranggießen von Stahl am Beispiel der Heißrissbildung

    Bernhard, C., 2007

    Research output: Thesis › Habilitation thesis › peer-review

  6. 2006
  7. Published

    A Contribution to Hot Tearing in the Continuous Casting Process

    Pierer, R., Bernhard, C. & Chimani, C., 2006, International ATS Steelmaking Conference. Ed. de la Revue de Métallurgie, p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Assessment of the Primary Structure of Slabs and the Influence on Hot- and Cold-Rolled Strip Structure

    Presslinger, H., Mayr, M., Tragl, E. & Bernhard, C., 2006, In: Steel research international. 77, p. 107-115

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Determination and Prediction of Austenite Grain Size in Relation to Product Quality of the Continuous Casting Process

    Reiter, J., Bernhard, C. & Presslinger, H., 2006, Determination and Prediction of Austenite Grain Size in Relation to Product Quality of the Continuous Casting Process. p. 805-816

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Die interaktive Stranggießsimulation auf www.steeluniversity.org

    Bernhard, C. & Sjökvist, T., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 189-195

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Einfluss der Prozessparameter auf die Erstarrung im VLBO-Prozess

    Zinner, S., Reiter, G., Bernhard, C., Schützenhöfer, W. & Rabitsch, R., 2006, Einfluss der Prozessparameter auf die Erstarrung im VLBO-Prozess. ASMET, p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    High Temperature Behavior during Solidification of Peritectic Steels under Continuous Casting Conditions

    Pierer, R. & Bernhard, C., 2006, High Temperature Behavior during Solidification of Peritectic Steels under Continuous Casting Conditions. p. 793-803

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Influence of alloying elements on the thermal contraction of peritectic steels during initial solidification

    Bernhard, C. & Xia, G., 2006, In: Ironmaking and steelmaking. 33, p. 52-56

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Lehrstuhl für Metallurgie

    Krieger, W., Bernhard, C., Korp, J., Hasenhündl, R. & Wiener, J., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 288-291

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Metallurgical Aspects of Casting High-Manganese Steel Grades

    Gigacher, G., Pierer, R., Wiener, J. & Bernhard, C., 2006, In: Advanced engineering materials. 8, p. 1096-1100

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Metallurgical Aspects of Casting High-Manganese Steels

    Gigacher, G., Bernhard, C., Pierer, R. & Wiener, J., 2006, In: Advanced engineering materials.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Methods for assessments of slab centre segregation as a tool to control slab continuous casting with soft reduction

    Presslinger, H., Ilie, S., Schiefermüller, A., Pissenberger, A., Parteder, E. & Bernhard, C., 2006, In: ISIJ international. 46, p. 1845-1851

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Modelling and experiments on kinetics of atmosphere purification by Argon purging in a high-temperature apparatus

    Anghelina, D., Karasangabo, A. & Bernhard, C., 2006, Proceedings of the CMFF'06. University of Technology and Economics, p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Steeluniversity.org – An Interactive E-Learning Resource on Steel Processing Technologies

    Michelic, S. & Bernhard, C., 2006, Proceedings des 13. Internationalen Studententags der Metallurgie. ASMET, p. 117-127

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    The interactive continuous casting simulation at www.steeluniversity.org

    Bernhard, C. & Sjökvist, T., 2006, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Why are some peritectic steels susceptible to surface crack formation for the continuously cast slab

    Xia, G., Bernhard, C., Fuerst, C. & Ilie, S., 2006, Proceedings of the Conference on Surface Quality of Continuously Cast Semis. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. 2005
  23. Published

    Verfahren zur Ermittlung von mechanischen Eigenschaften von Werkstoffen sowie Vorrichtung hierzu

    Bernhard, C. (Inventor), Chimani, C. (Inventor) & Tubikanec, A. (Inventor), 15 Dec 2005, Patent No. A852/2004

    Research output: Patent

  24. Published

    Evaluation of common constitutive equations for solidifying steel

    Pierer, R., Bernhard, C. & Chimani, C., May 2005, In: Berg- und hüttenmännische Monatshefte : BHM. 150.2005, 5, p. 163-169 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Forschungsarbeiten am Lehrstuhl für Metallurgie der Montanuniversität Leoben

    Krieger, W., Bernhard, C., Gigacher, G., Korp, J. & Plaul, J. F., 2005, In: Berg- und hüttenmännische Monatshefte : BHM. p. 399-407

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    High Temperature properties and the crack susceptibility of new steel grades for automotive purposes

    Gigacher, G., Pierer, R. & Bernhard, C., 2005, Proc. Computational Methods and Experimental Measurements in Material Characterisation. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. 2004
  28. Published

    Anforderungen an prozessorientierte Heißrissbildungsmodelle.

    Bernhard, C., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 90-95

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Bestimmung und Bedeutung der Randbedingungen für die Simulation von Stranggießprozessen.

    Lechner, M., Reiter, J., Bernhard, C., Forsthuber, M. & Zach, O., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 101-106

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Castability of Steels: Influence of the Interfacial Properties on the Continuous Casting Process.

    Karasangabo, A. & Bernhard, C., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 83-89

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Common hot tearing criteria and experimental validation

    Pierer, R., Bernhard, C. & Chimani, C., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 95-101

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Eigenschaften hochmanganhaltiger Stähle unter stranggießähnlichen Beanspruchungen.

    Gigacher, G., Bernhard, C. & Krieger, W., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 112-117

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Einsatz moderner Messtechnik zur Beurteilung der Erstarrungsvorgänge beim Stranggießen.

    Forsthuber, M., Rauter, W., Doringer, E., Bernhard, C. & Chimani, C., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 77-83

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Experimentelle Simulation von gegossenen Dünnbändern.

    Linzer, B., Bernhard, C. & Hohenbichler, G., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 107-111

    Research output: Contribution to journal › Article › Research › peer-review

  35. 2003
  36. Published

    Herstellung und Vergießbarkeit moderner Stähle für den Automobilbau

    Gigacher, G., Bernhard, C. & Krieger, W., 2003, In: Berg- und hüttenmännische Monatshefte : BHM. 148, p. 460-465

    Research output: Contribution to journal › Article › Research › peer-review

  37. 2002
  38. Published

    High Speed Casting versus Shell Strength.

    Bernhard, C., Wolf, M. & Hiebler, H., 2002, In: Berg- und hüttenmännische Monatshefte : BHM. 147, p. 43-47

    Research output: Contribution to journal › Article › Research › peer-review

  39. 2001
  40. Published

    Simulation of Solidification and Microstructure in Continuous Casting of Steel

    Bernhard, C., Thomas, B., Xia, G. & Chimani, C. M., 2001, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Verfolgung des Stickstoffgehaltes im LD-Stahlwerk bei der Erzeugung einzelner Stahlsorten

    Presslinger, H., Bernhard, C. & Höfer, W., 2001, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research › peer-review

  42. 2000
  43. Published

    How fast can we cast?

    Bernhard, C., Hiebler, H. & Wolf, M. M., 1 Dec 2000, In: Ironmaking and steelmaking. 27, 6, p. 450-454 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Experimental simulation of subsurface crack formation in continuous casting

    Bernhard, C., Hiebler, H. & Wolf, M. M., 1 Jan 2000, In: Revue de métallurgie. 97, 3, p. 333-344 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Simulation der Innenrissbildung beim Stranggießen von Stahl

    Bernhard, C., 2000, In: Berg- und hüttenmännische Monatshefte : BHM. p. 450-454

    Research output: Contribution to journal › Article › Research › peer-review

  46. 1999
  47. Published

    Mechanical properties and crack susceptibility of steel during solidification

    Hiebler, H. & Bernhard, C., 1 Jan 1999, In: Steel Research. 70.1999, 8-9, p. 349-355 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. 1996
  49. Published

    Simulation of shell strength properties by the SSCT test

    Bernhard, C., Hiebler, H. & Wolf, M. M., 1 Dec 1996, In: ISIJ international. 36, SUPPL.

    Research output: Contribution to journal › Article › Research › peer-review

  50. 1994
  51. Published

    Inner crack formation in continuous casting: Stress or strain criterion?

    Hiebler, H., Zirngast, J. & Bernhard, C., 1 Dec 1994, 77th Steelmaking conference proceedings. Vol. 77. p. 405-416 12 p. (Steelmaking Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 12 3 4 5 6 Next
View graph of relations

Contact

Phone: 2220

Latest Research Output

View more (290)