Abdellah Kharicha

201 - 250 out of 305Page size: 50

Research output

  1. 2015
  2. Published

    Transient melting of an ESR electrode

    Kharicha, A., Karimi Sibaki, E., Bohacek, J., Wu, M. & Ludwig, A., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Transport phenomena during solidification of a vertical casting of steel: a multiphase numerical study

    Zheng, Y., Wu, M. & Kharicha, A., 2015, 6th. Int. Conf. "SteelSim 2015", Bordolino, Italy, on data storage device.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Two-phase modelling of equiaxed crystal sedimentation and thermomechanic stress development in the sedimented packed bed

    Ludwig, A., Vakhrushev, A., Holzmann, T., Wu, M. & Kharicha, A., 2015, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Using four-phase Eulerian volume averaging approach to model macrosegregation and shrinkage cavity

    Wu, M., Kharicha, A. & Ludwig, A., 2015, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  6. 2014
  7. Published

    Simulation of Horizontal Centrifugal Casting: Mold Filling and Solidification

    Bohacek, J., Kharicha, A., Ludwig, A. & Wu, M., 15 Feb 2014, In: ISIJ international. 54.2014, 2, p. 266-274 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Advanced Process Simulation of Solidification and Melting

    Wu, M., Vakhrushev, A., Karimi Sibaki, E., Kharicha, A. & Ludwig, A., 15 Jan 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159.2014, 1, p. 30-40 11 p.

    Research output: Contribution to journal › Article › Research

  9. Published

    Influence of dendritic morphology on the calculation of macrosegregation in steel ingot

    Li, J., Wu, M. H., Ludwig, A., Kharicha, A. & Schumacher, P., 1 Jan 2014, Solidification and Gravity VI. Trans Tech Publications, p. 121-126 6 p. (Materials Science Forum; vol. 790-791).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Simulation of solidification and convection of NH4Cl-H2O solution in a water-cooled copper mold

    Ahmadein, M., Wu, M., Stefan Kharicha, M., Kharicha, A. & Ludwig, A., 1 Jan 2014, Solidification and Gravity VI. Trans Tech Publications, p. 247-252 6 p. (Materials Science Forum; vol. 790-791).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    3D Lattice Boltzmann flow simulations through dendritic mushy zones

    Ludwig, A., Kharicha, A., Hölzl, C., Domitner, J., Wu, M. & Pusztai, T., 2014, In: Engineering analysis with boundary elements. 45, p. 29-35

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Annual report of CD-Lab activity during 2014, Project progress and achievements.

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Vakhrushev, A., 2014

    Research output: Book/Report › Commissioned report › Transfer

  13. Published

    "A parameter study on the effect of slag electrode conductivity on the solidification of a large scale ESR ingot"

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B. & Ramprecht, M., 2014, 2nd Int. Conf. Ingot Casting Rolling Forging, on data storage device..

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Evaluation of a 5-phase mixed columnar-equiaxed solidification model with a benchmark solidification experiment of NH4Cl-H2O solution

    Ahmadein, M., Wu, M., Stefan Kharicha, M., Kharicha, A. & Ludwig, A., 2014, Materials Science Forum. Vol. 790-791.2013. p. 247-252 6 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  15. Published

    "Free surface deformation by the application of electrical currents"

    Kharicha, A., Teplyakov, I., Ivochkin, Y., Wu, M., Ludwig, A. & Guseva, A., 2014, 9th Int. Pamir Conf. on Fundamental and applied MHD, Thermo acoustic and Space technologies. p. 245-249

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    "How to get a smooth ESR Ingot surface?"

    Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 2014, 2nd Int. Conf. Ingot Casting Rolling Forging on data storage device..

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Influence of crystal morphological parameters on the solidification of ESR ingot

    Karimi Sibaki, E., Kharicha, A., Korp, J., Wu, M. & Ludwig, A., 2014, Materials Science Forum. Vol. 790-791.2014. p. 396-401 (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  18. Published

    Influence of dendritic morphology on the calculation of macrosegregation in steel ingot

    Li, J., Wu, M., Ludwig, A., Kharicha, A. & Schumacher, P., 2014, Materials Science Forum Vols. 790-791. p. 121-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Modeling diffusion-governed solidification of ternary alloys – Part 2:Macroscopic transport phenomena and macrosegregation

    Wu, M., Li, J., Ludwig, A. & Kharicha, A., 2014, In: Computational materials science. 92, p. 267-285

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Modeling of Multiscale and Multiphase Phenomena in Materials Processing

    Ludwig, A., Kharicha, A. & Wu, M., 2014, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 45.2014, 1, p. 36-43 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    "Numerical and experimental study of Horizontal Centrifugal Casting (MCL: A1.16)"

    Bohacek, J., Kharicha, A. & Ludwig, A., 2014

    Research output: Book/Report › Commissioned report › Transfer

  22. Published

    Numerical study of the influence of diffusion-governed growth kinetics of ternary alloy on macrosegregation

    Wu, M. H., Kharicha, A. & Ludwig, A., 2014, Materials Science Forum. Trans Tech Publications, p. 85-90 6 p. (Materials Science Forum; vol. 790-791).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Observation of flow regimes and transitions during a columnar solidification experiment

    Stefan Kharicha, M., Kharicha, A., Wu, M. & Ludwig, A., 2014, In: Fluid Dynamics Research. 46, p. 1-21

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    On Melting of Electrodes during Electro-Slag Remelting

    Kharicha, A., Ludwig, A. & Wu, M., 2014, In: ISIJ international. 54, p. 1621-1628

    Research output: Contribution to journal › Article › Research › peer-review

  25. 2013
  26. E-pub ahead of print

    Modeling the Effects of Strand Surface Bulging and Mechanical Softreduction on the Macrosegregation Formation in Steel Continuous Casting

    Domitner, J., Wu, M., Kharicha, A., Ludwig, A., Kaufmann, B., Schaden, T. & Reiter, J., 24 Oct 2013, (E-pub ahead of print) In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45.2014, 3, p. 1415-1434 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Modeling diffusion-governed solidification of ternary alloys - Part 1: Coupling solidification kinetics with thermodynamics

    Wu, M., Li, J., Ludwig, A. & Kharicha, A., 13 Jun 2013, In: Computational materials science. 79, p. 830-840 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Multi-physics simulation of the component attachment within embedding process

    Macurova, K., Kharicha, A., Pletz, M., Mataln, M., Bermejo, R., Schongrundner, R., Krivec, T., Antretter, T., Maia, W., Morianz, M. & Brizoux, M., 1 Apr 2013, 14th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2013. Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Contribution of the mould current to the ingot surface quality in the electroslag remelting process

    Kharicha, A., Sibaki, E. K., Wu, M. & Ludwig, A., 1 Jan 2013, International Symposium on Liquid Metal Processing and Casting 2013, LMPC 2013. p. 95-99 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Variation of the resistance during the electrode movement in the electroslag remelting process

    Kharicha, A., Wu, M. & Ludwig, A., 1 Jan 2013, International Symposium on Liquid Metal Processing and Casting 2013, LMPC 2013. p. 145-150 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    "2D simulation of ESR process"

    Karimi Sibaki, E., Kharicha, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    3D magneto-hydrodynamic simulation of the liquid region in an electro-slag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2013, In: International journal of heat and mass transfer.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    "A meandering sinking flow as possible explanation for the thermohaline staircaises in oceans"

    Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, "A meandering sinking flow as possible explanation for the thermohaline staircaises in oceans".

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    A Numerical Study on the Influence of the Frequency of the Applied AC Current on the Electroslag Remelting Process"

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B. & Ramprecht, M., 2013, A Numerical Study on the Influence of the Frequency of the Applied AC Current on the Electroslag Remelting Process". p. 13-19

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Application of microprobe analysis to the reconstruction and characterization of dendritic structures

    Domitner, J., Kharicha, A., Wu, M. & Ludwig, A., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, p. 607-616

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    "Contribution of the Mould Current to the Ingor Surface quality in the Electroslag Remelting Process"

    Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 2013, "Contribution of the Mould Current to the Ingor Surface quality in the Electroslag Remelting Process". p. 95-99

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    "Evaluation of a 5-phase mixed columnar-equiaxed solidification model with a benchmark solidification experiment of NH4Cl-H2O solution

    Ahmadein, M., Wu, M., Stefan Kharicha, M., Kharicha, A. & Ludwig, A., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Exploration of the double-diffusive convection during dendritic solidification with a combined volume-averaging and cellular-automaton model

    Stefan-Kharicha, M., Wu, M., Ludwig, A. & Kharicha, A., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Half Year Report Q1-2/2013 "Numerical and experimental study of Horizontal Centrifugal Casting"

    Bohacek, J., Kharicha, A. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  40. Published

    “MHD and multiphase phenomena in an industrial scale electro-slag remelting process”

    Kharicha, A., Wu, M. & Ludwig, A., 2013, “MHD and multiphase phenomena in an industrial scale electro-slag remelting process”.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    "MHD in electric current-induced flow"

    Kharicha, A., Wu, M. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    "MHD instabilities of bath/liquid metal interface”

    Kharicha, A., Ludwig, A. & Wu, M., 2013, "MHD instabilities of bath/liquid metal interface”.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Minutes of the spring meeting on project "Numerical and experimental study of Horizontal Centrifugal Casting"

    Bohacek, J., Kharicha, A. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer

  44. Published

    Modeling the effect of strand surface bulging and mechanical softreduction on the macrosegregation formation in steel continuous casting

    Domitner, J., Wu, M., Kharicha, A., Ludwig, A., Kaufmann, B., Reiter, J. & Schaden, T., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science .

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Modelling diffusion-governed solidification of ternary alloys - Part 1: Coupling solidification kinetics with thermodynamics

    Wu, M., Li, J., Ludwig, A. & Kharicha, A., 2013, In: Computational materials science. 79, p. 830-840

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Modelling macrosegregation in a 2.45 ton steel ingot

    Li, J., Wu, M., Ludwig, A. & Kharicha, A., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    "Numerical modeling of centrifugal casting: FLUENT vs. own code in MATLAB"

    Bohacek, J., Kharicha, A., Ludwig, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    "Numerical study of horizontal centrifugal casting of HSS work roll"

    Bohacek, J., Ludwig, A. & Kharicha, A., 2013, "Numerical study of horizontal centrifugal casting of HSS work roll".

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    "Parameter study of large scale ESR process"

    Karimi Sibaki, E., Kharicha, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Shallow Water Model for Horizontal Centrifugal Casting

    Bohacek, J., Kharicha, A., Ludwig, A. & Wu, M., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Simulation of macrosegregation in a 2.45-ton steel ingot using a three-phase mixed columnar-equiaxed model

    Li, J., Wu, M., Ludwig, A. & Kharicha, A., 2013, In: International journal of heat and mass transfer. 72.2014, May, p. 668-679 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Simulation of the voltage signal during the formation and the departure of a droplet in the electro-slag Remelting process

    Kharicha, A., Wu, M. & Ludwig, A., 2013, In: International journal of thermal sciences.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    “Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase Particle Image Velocimetry technique. Part I

    Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, p. 650-660

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 Next
View graph of relations

Contact

Phone: 3100

Latest Research Output

View more (305)