Abdellah Kharicha

201 - 300 out of 305Page size: 100

Research output

  1. 2015
  2. Published

    Transient melting of an ESR electrode

    Kharicha, A., Karimi Sibaki, E., Bohacek, J., Wu, M. & Ludwig, A., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Transport phenomena during solidification of a vertical casting of steel: a multiphase numerical study

    Zheng, Y., Wu, M. & Kharicha, A., 2015, 6th. Int. Conf. "SteelSim 2015", Bordolino, Italy, on data storage device.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Two-phase modelling of equiaxed crystal sedimentation and thermomechanic stress development in the sedimented packed bed

    Ludwig, A., Vakhrushev, A., Holzmann, T., Wu, M. & Kharicha, A., 2015, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Using four-phase Eulerian volume averaging approach to model macrosegregation and shrinkage cavity

    Wu, M., Kharicha, A. & Ludwig, A., 2015, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  6. 2014
  7. Published

    Simulation of Horizontal Centrifugal Casting: Mold Filling and Solidification

    Bohacek, J., Kharicha, A., Ludwig, A. & Wu, M., 15 Feb 2014, In: ISIJ international. 54.2014, 2, p. 266-274 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Advanced Process Simulation of Solidification and Melting

    Wu, M., Vakhrushev, A., Karimi Sibaki, E., Kharicha, A. & Ludwig, A., 15 Jan 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159.2014, 1, p. 30-40 11 p.

    Research output: Contribution to journal › Article › Research

  9. Published

    Influence of dendritic morphology on the calculation of macrosegregation in steel ingot

    Li, J., Wu, M. H., Ludwig, A., Kharicha, A. & Schumacher, P., 1 Jan 2014, Solidification and Gravity VI. Trans Tech Publications, p. 121-126 6 p. (Materials Science Forum; vol. 790-791).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Simulation of solidification and convection of NH4Cl-H2O solution in a water-cooled copper mold

    Ahmadein, M., Wu, M., Stefan Kharicha, M., Kharicha, A. & Ludwig, A., 1 Jan 2014, Solidification and Gravity VI. Trans Tech Publications, p. 247-252 6 p. (Materials Science Forum; vol. 790-791).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    3D Lattice Boltzmann flow simulations through dendritic mushy zones

    Ludwig, A., Kharicha, A., Hölzl, C., Domitner, J., Wu, M. & Pusztai, T., 2014, In: Engineering analysis with boundary elements. 45, p. 29-35

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Annual report of CD-Lab activity during 2014, Project progress and achievements.

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Vakhrushev, A., 2014

    Research output: Book/Report › Commissioned report › Transfer

  13. Published

    "A parameter study on the effect of slag electrode conductivity on the solidification of a large scale ESR ingot"

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B. & Ramprecht, M., 2014, 2nd Int. Conf. Ingot Casting Rolling Forging, on data storage device..

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Evaluation of a 5-phase mixed columnar-equiaxed solidification model with a benchmark solidification experiment of NH4Cl-H2O solution

    Ahmadein, M., Wu, M., Stefan Kharicha, M., Kharicha, A. & Ludwig, A., 2014, Materials Science Forum. Vol. 790-791.2013. p. 247-252 6 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  15. Published

    "Free surface deformation by the application of electrical currents"

    Kharicha, A., Teplyakov, I., Ivochkin, Y., Wu, M., Ludwig, A. & Guseva, A., 2014, 9th Int. Pamir Conf. on Fundamental and applied MHD, Thermo acoustic and Space technologies. p. 245-249

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    "How to get a smooth ESR Ingot surface?"

    Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 2014, 2nd Int. Conf. Ingot Casting Rolling Forging on data storage device..

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Influence of crystal morphological parameters on the solidification of ESR ingot

    Karimi Sibaki, E., Kharicha, A., Korp, J., Wu, M. & Ludwig, A., 2014, Materials Science Forum. Vol. 790-791.2014. p. 396-401 (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  18. Published

    Influence of dendritic morphology on the calculation of macrosegregation in steel ingot

    Li, J., Wu, M., Ludwig, A., Kharicha, A. & Schumacher, P., 2014, Materials Science Forum Vols. 790-791. p. 121-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Modeling diffusion-governed solidification of ternary alloys – Part 2:Macroscopic transport phenomena and macrosegregation

    Wu, M., Li, J., Ludwig, A. & Kharicha, A., 2014, In: Computational materials science. 92, p. 267-285

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Modeling of Multiscale and Multiphase Phenomena in Materials Processing

    Ludwig, A., Kharicha, A. & Wu, M., 2014, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 45.2014, 1, p. 36-43 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    "Numerical and experimental study of Horizontal Centrifugal Casting (MCL: A1.16)"

    Bohacek, J., Kharicha, A. & Ludwig, A., 2014

    Research output: Book/Report › Commissioned report › Transfer

  22. Published

    Numerical study of the influence of diffusion-governed growth kinetics of ternary alloy on macrosegregation

    Wu, M. H., Kharicha, A. & Ludwig, A., 2014, Materials Science Forum. Trans Tech Publications, p. 85-90 6 p. (Materials Science Forum; vol. 790-791).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Observation of flow regimes and transitions during a columnar solidification experiment

    Stefan Kharicha, M., Kharicha, A., Wu, M. & Ludwig, A., 2014, In: Fluid Dynamics Research. 46, p. 1-21

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    On Melting of Electrodes during Electro-Slag Remelting

    Kharicha, A., Ludwig, A. & Wu, M., 2014, In: ISIJ international. 54, p. 1621-1628

    Research output: Contribution to journal › Article › Research › peer-review

  25. 2013
  26. E-pub ahead of print

    Modeling the Effects of Strand Surface Bulging and Mechanical Softreduction on the Macrosegregation Formation in Steel Continuous Casting

    Domitner, J., Wu, M., Kharicha, A., Ludwig, A., Kaufmann, B., Schaden, T. & Reiter, J., 24 Oct 2013, (E-pub ahead of print) In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45.2014, 3, p. 1415-1434 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Modeling diffusion-governed solidification of ternary alloys - Part 1: Coupling solidification kinetics with thermodynamics

    Wu, M., Li, J., Ludwig, A. & Kharicha, A., 13 Jun 2013, In: Computational materials science. 79, p. 830-840 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Multi-physics simulation of the component attachment within embedding process

    Macurova, K., Kharicha, A., Pletz, M., Mataln, M., Bermejo, R., Schongrundner, R., Krivec, T., Antretter, T., Maia, W., Morianz, M. & Brizoux, M., 1 Apr 2013, 14th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2013. Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Contribution of the mould current to the ingot surface quality in the electroslag remelting process

    Kharicha, A., Sibaki, E. K., Wu, M. & Ludwig, A., 1 Jan 2013, International Symposium on Liquid Metal Processing and Casting 2013, LMPC 2013. p. 95-99 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Variation of the resistance during the electrode movement in the electroslag remelting process

    Kharicha, A., Wu, M. & Ludwig, A., 1 Jan 2013, International Symposium on Liquid Metal Processing and Casting 2013, LMPC 2013. p. 145-150 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    "2D simulation of ESR process"

    Karimi Sibaki, E., Kharicha, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    3D magneto-hydrodynamic simulation of the liquid region in an electro-slag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2013, In: International journal of heat and mass transfer.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    "A meandering sinking flow as possible explanation for the thermohaline staircaises in oceans"

    Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, "A meandering sinking flow as possible explanation for the thermohaline staircaises in oceans".

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    A Numerical Study on the Influence of the Frequency of the Applied AC Current on the Electroslag Remelting Process"

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B. & Ramprecht, M., 2013, A Numerical Study on the Influence of the Frequency of the Applied AC Current on the Electroslag Remelting Process". p. 13-19

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Application of microprobe analysis to the reconstruction and characterization of dendritic structures

    Domitner, J., Kharicha, A., Wu, M. & Ludwig, A., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, p. 607-616

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    "Contribution of the Mould Current to the Ingor Surface quality in the Electroslag Remelting Process"

    Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 2013, "Contribution of the Mould Current to the Ingor Surface quality in the Electroslag Remelting Process". p. 95-99

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    "Evaluation of a 5-phase mixed columnar-equiaxed solidification model with a benchmark solidification experiment of NH4Cl-H2O solution

    Ahmadein, M., Wu, M., Stefan Kharicha, M., Kharicha, A. & Ludwig, A., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Exploration of the double-diffusive convection during dendritic solidification with a combined volume-averaging and cellular-automaton model

    Stefan-Kharicha, M., Wu, M., Ludwig, A. & Kharicha, A., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Half Year Report Q1-2/2013 "Numerical and experimental study of Horizontal Centrifugal Casting"

    Bohacek, J., Kharicha, A. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  40. Published

    “MHD and multiphase phenomena in an industrial scale electro-slag remelting process”

    Kharicha, A., Wu, M. & Ludwig, A., 2013, “MHD and multiphase phenomena in an industrial scale electro-slag remelting process”.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    "MHD in electric current-induced flow"

    Kharicha, A., Wu, M. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    "MHD instabilities of bath/liquid metal interface”

    Kharicha, A., Ludwig, A. & Wu, M., 2013, "MHD instabilities of bath/liquid metal interface”.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Minutes of the spring meeting on project "Numerical and experimental study of Horizontal Centrifugal Casting"

    Bohacek, J., Kharicha, A. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer

  44. Published

    Modeling the effect of strand surface bulging and mechanical softreduction on the macrosegregation formation in steel continuous casting

    Domitner, J., Wu, M., Kharicha, A., Ludwig, A., Kaufmann, B., Reiter, J. & Schaden, T., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science .

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Modelling diffusion-governed solidification of ternary alloys - Part 1: Coupling solidification kinetics with thermodynamics

    Wu, M., Li, J., Ludwig, A. & Kharicha, A., 2013, In: Computational materials science. 79, p. 830-840

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Modelling macrosegregation in a 2.45 ton steel ingot

    Li, J., Wu, M., Ludwig, A. & Kharicha, A., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    "Numerical modeling of centrifugal casting: FLUENT vs. own code in MATLAB"

    Bohacek, J., Kharicha, A., Ludwig, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    "Numerical study of horizontal centrifugal casting of HSS work roll"

    Bohacek, J., Ludwig, A. & Kharicha, A., 2013, "Numerical study of horizontal centrifugal casting of HSS work roll".

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    "Parameter study of large scale ESR process"

    Karimi Sibaki, E., Kharicha, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Shallow Water Model for Horizontal Centrifugal Casting

    Bohacek, J., Kharicha, A., Ludwig, A. & Wu, M., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Simulation of macrosegregation in a 2.45-ton steel ingot using a three-phase mixed columnar-equiaxed model

    Li, J., Wu, M., Ludwig, A. & Kharicha, A., 2013, In: International journal of heat and mass transfer. 72.2014, May, p. 668-679 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Simulation of the voltage signal during the formation and the departure of a droplet in the electro-slag Remelting process

    Kharicha, A., Wu, M. & Ludwig, A., 2013, In: International journal of thermal sciences.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    “Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase Particle Image Velocimetry technique. Part I

    Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, p. 650-660

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    “Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase Particle Image Velocimetry technique. Part II

    Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, p. 661-668

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase PIV technique

    Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    "Using a Three Phase Mixed Columnar-Equiaxed Solidification Model to Study Macrosegregation in Ingot Casting: Perspectives and Limitations"

    Wu, M., Kharicha, A. & Ludwig, A., 2013, "Using a Three Phase Mixed Columnar-Equiaxed Solidification Model to Study Macrosegregation in Ingot Casting: Perspectives and Limitations". p. 171-180

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    "Variation of the Resistance During the Elektrode Movement in the Electroslag Remelting Process"

    Kharicha, A., Wu, M. & Ludwig, A., 2013, "Variation of the Resistance During the Elektrode Movement in the Electroslag Remelting Process". p. 145-150

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. 2012
  59. Published

    Modeling of Multiscale and Multiphase Phenomena in Material Processing

    Ludwig, A., Kharicha, A. & Wu, M., 15 May 2012, CFD Modeling and Simulation in Materials Processing - Held During the TMS 2012 Annual Meeting and Exhibition. p. 147 - 161

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Vibrations induced flow in a horizontal centrifugal casting

    Kharicha, A., Bohacek, J., Ludwig, A. & Wu, M., 15 May 2012, CFD Modeling and Simulation in Materials Processing - Held During the TMS 2012 Annual Meeting and Exhibition. Orlando: TMS, p. 227-234 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Vibrations Induced Flow in a Horizontal Centrifugal Casting

    Kharicha, A., Bohacek, J., Ludwig, A. & Wu, M., 15 May 2012, CFD Modeling and Simulation in Materials Processing. John Wiley & Sons, Großbritannien, p. 227-234 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  62. Published

    Influence of the earth magnetic field on electrically induced flows

    Kharicha, A., Wu, M., Ludwig, A. & Karimi Sibaki, E., 2012, In: Journal of iron and steel research international. 19, p. 63-66

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Influence of the frequency of the applied AC current on the electroslag remelting process

    Kharicha, A., Wu, M., Ludwig, A., Ramprecht, M. & Holzgruber, H., 2012, CFD Modeling and Simulation in Materials Processing: Proceedings of a symposium sponsored by Association for Iron and Steel Technology and the Process Technology and Modeling Committee of the Extraction and Processing Division and the Solidification Committee of the Materials Processing and Manufacturing Division of TMS (The Minerals, Metals & Materials Society) Held during the TMS 2012 Annual Meeting & Exhibition Orlando, Florida, USA March 11-15, 2012. p. 139-146

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Investigations on the origin of radial distribution of non-metallic inclusions in ESR ingot

    Kharicha, A., Körp, J., Kubin, M., Wu, M. & Ludwig, A., 2012, CLEANSTEEL8. p. 145-157

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Modeling of multiphase and multiscale phenomena in materials processing

    Ludwig, A., Kharicha, A. & Wu, M., 2012, CFD Modeling and Simulation in Materials Processin. p. 149-161

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  66. Published

    Multiphase modelling of the macrosegregation in ingot castings

    Wu, M., Li, J., Kharicha, A. & Ludwig, A., 2012, ICRF-2012. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Numerical study of the influence of mold filling conditions on the as-cast structure of Al-4 wt.% Cu ingots

    Ahmadein, M., Kharicha, A. & Ludwig, A., 2012, International Conf. on Engineering and Technology. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Simulation of channel segregation using a two-phase columnar solidification model, Part II: Mechanism and parameter study

    Li, J., Wu, M., Hao, J., Kharicha, A. & Ludwig, A., 2012, In: Computational materials science. 55, p. 419-429

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Simulation of the as-cast structure of Al-4.0wt.%Cu ingots with a 5-phase mixed columnar-equiaxed solidification model

    Wu, M., Ahmadein, M., Kharicha, A. & Ludwig, A., 2012, McWASP XIII. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    “Simultaneous observation of melt flow and motion of equiaxed crystals during solidification

    Kharicha, A., 2012, Metall. Mater. Trans. A.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  71. Published

    Vibration induced flow in a horizontal centrifugal casting

    Kharicha, A., Bohàcek, J., Ludwig, A. & Wu, M., 2012, Symposium on "CFD and Simulation in Materials Processing". p. 227-234

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Vibration induced flow in a horizontal centrifugal casting

    Kharicha, A., Bohacek, J., Ludwig, A. & Wu, M., 2012, CFD Modeling and Simulation in Materials Processing. p. 227-234

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  73. 2011
  74. Published

    Simulation of the Deformation of a Flexible Combo Bag in a DC Aluminium Casting

    Kharicha, A., Ludwig, A. & Wu, M., 20 Apr 2011, Supplemental Proceedings: Materials Fabrication, Properties, Characterization, and Modeling. Vol. 2. p. 273-278 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  75. Published

    3D simulation of interdendritic flow through a Al-18wt.%Cu structure captured with X-ray microtomography

    Domitner, J., Hölzl, C., Kharicha, A., Wu, M., Ludwig, A., Köhler, M. & Ratke, L., 2011, IOP Conf. Series: Materials Science and Engineering. p. 012016-1-012016-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    3D simulation of interdendritic flow through a Al-18wt.%Cu structure captured with X-ray microtomography

    Domitner, J., Hölzl, C., Kharicha, A., Wu, M., Ludwig, A., Köhler, M. & Ratke, L., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  77. Published

    3d simulation of the electro-slag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Proceeding of the TMS Annual Meeting. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    3D simulation of the melting during an electro-slag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Int. Symp. on Liquid Metal Processing and Casting (LMPC-11). p. 41-48

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    Droplet formation in small electroslag remelting processes

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Int. Symp. on Liquid Metal Processing and Casting (LMPC-11). p. 113-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Liquid metal inside a horizontally rotating cylinder under vibrations

    Bohàcek, J., Kharicha, A., Ludwig, A. & Wu, M., 2011, Proceedings of Experimental Fluid Mechanics (EFM 2011). p. 564-573

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Simulation of the deformation of a flexible combo bag in a DC aluminium casting

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Proceeding of TMS Annual Meeting. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Simulation of the melting of a flat electrode during an elektroslag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Proceedings of the 4rd Int. Conf. Simulation and Modeling in Metallurgical Processes in Steelmaking (STEELSIM 2011). p. 19.1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Spatio-temporal variation of the electromagnetic field during the electroslag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2011, 8th Int. Pamir Conf. on Fund. and Applied MHD (PAMIR). p. 695-699

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Thermal state of the electrode during the electro-slag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Liquid Metal Processing and Casting. p. 113-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. 2010
  86. Published

    3-D microprobe analysis of dendritic structures in steel

    Domitner, J., Kharicha, A., Ludwig, A. & Grasser, M., 30 Nov 2010, AIST Steel Properties and Applications Conference Proceedings - Combined with MS and T'10, Materials Science and Technology 2010. p. 735-743 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    3D Microprobe Analysis of Dendritic Structures in Steel

    Domitner, J., Kharicha, A., Ludwig, A. & Grasser, M., 2010,

    Proceedings of the International Conference on Materials Science & Technology (MS&T'10)

    .     p. 908-916

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    A Method for the Reconstruction of Three-Dimensional Dendritic Structures in Steel Considering Their Changing Shape during Solidification

    Ludwig, A., Kharicha, A. & Domitner, J., 2010, A Method for the Reconstruction of Three-Dimensional Dendritic Structures in Steel Considering Their Changing Shape during Solidification. p. 908-916

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Importance of Melt Flow in Solidifying Mushy Zone

    Wu, M., Vakhrushev, A., Nunner, G., Pfeiler, C., Kharicha, A. & Ludwig, A., 2010, In: The open transport phenomena journal . 5, 2, p. 16-23

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Influence of an imposed vertical current on the droplet formation during a melting process

    Kharicha, A. & Ludwig, A., 2010, Influence of an imposed vertical current on the droplet formation during a melting process. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Influence of the slag/pool interface on the solidification in an electroslag remelting process

    Kharicha, A., Schuetzenhoefer, W., Ludwig, A. & Reiter, G., 2010, In: Materials Science Forum . p. 229-236

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Interaction of a Flexible Combo Bag with the Flow in a DC Aluminium Casting DGM

    Kharicha, A., Ludwig, A. & Wu, M., 2010, Symposium Stranggiessen 2010.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    On the origin of the resistance swing during the Electro-Slag remelting process

    Kharicha, A., 2010, On the origin of the resistance swing during the Electro-Slag remelting process. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Reconstruction of Three-Dimensional Dendritic Structures Based on the Investigation of Microsegregation Patterns

    Domitner, J., Kharicha, A., Grasser, M. & Ludwig, A., 2010, In: Steel research international. 81, p. 644-651

    Research output: Contribution to journal › Article › Research › peer-review

  95. 2009
  96. Published

    Numerical and experimental investigations on the ESR process of the hot work tool steel H11

    Kharicha, A., Schützenhöfer, W., Ludwig, A. & Tanzer, R., 1 Dec 2009, LMPC 2009 - Proceedings of the International Symposium on Liquid Metal Processing and Casting. p. 235-242 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Reformulation of time averaged Joule heating in presence of temperature fluctuations

    Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 4 Nov 2009, In: International journal of cast metals research. 22, 1-4, p. 155-159 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Experimental and numerical modeling of the flow field in an industrial bronze caster - Improving the numerical model

    Eck, S., Pfeiler, C., Kharicha, A., Ludwig, A. & Evans, J. W., 24 Jun 2009, TMS Annual Meeting. p. 635-642 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    Experimental and Numerical Investigations of NH4Cl Solidification in a Mould. Part 1: Experimental results

    Stefan Kharicha, M., Eck, S., Könözsy, L., Kharicha, A. & Ludwig, A., 2009, In: International journal of cast metals research. 22, 1-4, p. 168 - 171 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Reformulation of the Time Averaged Joule Heating in the Presence of Temperature Fluctuations

    Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 2009, In: International journal of cast metals research. 22, p. 155-159

    Research output: Contribution to journal › Article › Research › peer-review

  101. 2008
  102. Published

    Modeling of the ESR Slag/pool interface with a VOF method

    Kharicha, A., 2008, 5th Int. Conf. on Solidification and Gravity (SG08).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    On the Importance of Electric Currents Flowing directly into the Mould during an ESR Process

    Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 2008, In: Steel research international. 79, p. 632-636

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Solidification and Particle Entrapment during Continuous Casting of Steel

    Pfeiler, C., Thomas, B. G., Wu, M., Ludwig, A. & Kharicha, A., 2008, In: Steel research international. 79, p. 599-607

    Research output: Contribution to journal › Article › Research › peer-review

  105. 2007
  106. Published

    Correct electric current paths in a multiphase process involving two phases with large difference in electric conductivity

    Kharicha, A., Ludwig, A. & Wu, M., 2007, Correct electric current paths in a multiphase process involving two phases with large difference in electric conductivity.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  107. Published

    Interaction between steel droplets and slag in the ESR process

    Kharicha, A., Schützenhöfer, W., Ludwig, A. & Tanzer, R., 2007, Interaction between steel droplets and slag in the ESR process. p. 113-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  108. Published

    Multiphase Modelling of the Slag Region in the ESR Process

    Kharicha, A., Schützenhöfer, W., Ludwig, A. & Tanzer, R., 2007, Multiphase Modelling of the Slag Region in the ESR Process. p. 107-111

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  109. Published

    On the Importance of the Electric Currents Flowing directly into the Mould during an ESR Process

    Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 2007, On the Importance of the Electric Currents Flowing directly into the Mould during an ESR Process. p. 105-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 Next
View graph of relations

Contact

Phone: 3100

Latest Research Output

View more (305)