Montanuniversität

Organisational unit: University

1501 - 1600 out of 33,842Page size: 100

Research output

  1. 2023
  2. Published

    Digitalisierung der Handsortierung durch Künstliche Intelligenz, Machine Learning und Human Machine Interaction

    Aberger, J., Khodier, K. & Sarc, R., 15 Nov 2023, In: Österreichische Wasser- und Abfallwirtschaft : ÖWAW . 76.2024, February, p. 19-25 7 p.

    Research output: Contribution to journal › Article › Research

  3. Published

    Disaster resilience - A Guide to Prevention, Response, and Recovery

    Vladimir, C. M., 15 Nov 2023, (Naučno-stručno društvo za upravljanje rizicima u vanrednim situacijama)

    Research output: Book/Report › Book › Research

  4. Published

    Historical development of the Scientific-Professional Society for Disaster Risk Management: Istorijski razvoj Naučno-stručno društva za upravljanje rizicima

    Vladimir, C. M., 15 Nov 2023, (Naučno-stručno društvo za upravljanje rizicima u vanrednim situacijama)

    Research output: Book/Report › Book › Research

  5. Published

    Investigating the Aging Behavior of High-Density Polyethylene and Polyketone in a Liquid Organic Hydrogen Carrier

    Surisetty, J. S. S., Sharifian, M., Lucyshyn, T. & Holzer, C., 15 Nov 2023, In: Polymers. 15.2023, 22, 14 p., 4410.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Observing light induced charge propagation through organic epitaxial nanoneedle networks on hexagonal boron nitride

    Kratzer, M., Genser, J., Matković, A., Lüftner, D., Chen, Z. N., Siri, O., Puschnig, P., Becker, C. & Teichert, C., 15 Nov 2023.

    Research output: Contribution to conference › Poster › Transfer › peer-review

  7. Published

    Precipitation behaviour in AlMgZnCuAg crossover alloy with coarse and ultrafine grains

    Willenshofer, P., Tunes, M. A., Kainz, C., Renk, O., Kremmer, T., Gneiger, S., Uggowitzer, P. & Pogatscher, S., 15 Nov 2023, In: Materials Research Letters. 11.2023, 12, p. 1063-1072 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Comparison of Inductive Thermography and Computer Tomography Results for Short Surface Cracks

    Oswald-Tranta, B., 14 Nov 2023, In: Engineering proceedings. 51.2023, 1, 5 p., 36.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Does SW China have Carlin-type gold deposits? A micro- to atomic-scale perspective

    Xie, Z., Gopon, P., Xia, Y., Douglas, J., Cline, J., Liu, J., Tan, Q., Xiao, J., Wen, Y., Chen, Y., Li, P. & Moody, M., 14 Nov 2023, In: Mineralium deposita. 59.2024, April, p. 757-772 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    How to verify the precision of density-functional-theory implementations via reproducible and universal workflows

    Bosoni, E., Beal, L., Bercx, M., Blaha, P., Blügel, S., Bröder, J., Callsen, M., Cottenier, S., Degomme, A., Dikan, V., Eimre, K., Flage-Larsen, E., Fornari, M., Garcia, A., Genovese, L., Giantomassi, M., Huber, S. P., Janssen, H., Kastlunger, G. & Krack, M. & 25 others, Kresse, G., Kühne, T. D., Lejaeghere, K., Madsen, G. K. H., Marsman, M., Marzari, N., Michalicek, G., Mirhosseini, H., Müller, T. M. A., Petretto, G., Pickard, C. J., Poncé, S., Rignanese, G.-M., Rubel, O., Ruh, T., Sluydts, M., Vanpoucke, D. E. P., Vijay, S., Wolloch, M., Wortmann, D., Yakutovich, A., Yu, J., Zadoks, A., Zhu, B. & Pizzi, G., 14 Nov 2023, In: Nature Reviews Physics . 2023, ??? Stand: 27. November 2023, 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Sortierung von Mehrschichtfolien durch Anwendung von Transflektion und Machine-Learning-Ansätzen

    Koinig, G., Kuhn, N. E. & Tischberger-Aldrian, A., 14 Nov 2023, In: Österreichische Wasser- und Abfallwirtschaft : ÖWAW . 76.2024, February, p. 42-50 9 p.

    Research output: Contribution to journal › Article › Research

  12. Published

    A Novel Approach to Identify Industrial Logistics Decarbonization Opportunities: Method Development and Preliminary Validation

    Miklautsch-Breznik, P., Hoffelner, M. & Woschank, M., 13 Nov 2023, In: Applied Sciences (Switzerland). 13.2023, 22, 24 p., 1277.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Strain-induced clustering in Al alloys

    Aster, P., Dumitraschkewitz, P., Uggowitzer, P., Schmid, F., Falkinger, G., Strobel, K., Kutleša, P., Tkadletz, M. & Pogatscher, S., 11 Nov 2023, In: Materialia. 32.2023, December, 7 p., 101964.

    Research output: Contribution to journal › Article › Research › peer-review

  14. E-pub ahead of print

    Einfluss der frühzeitigen Branderkennung in Straßentunnel: Eine numerische Studie zum Brand von Elektrofahrzeugen

    Patsekha, A. & Galler, R., 10 Nov 2023, (E-pub ahead of print) Tagungsband der Fachtagung Katastrophenforschung 2023: Mit Beiträgen aus der Sicherheits- und Katastrophenforschung. Wien, p. 64-66 3 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Deflecting Dendrites by Introducing Compressive Stress in Li7La3Zr2O12 Using Ion Implantation

    Flatscher, F., Todt, J., Burghammer, M., Søreide, H. S., Porz, L., Li, Y., Wenner, S., Bobal, V., Ganschow, S., Sartory, B., Brunner, R., Hatzoglou, C., Keckes, J. & Rettenwander, D., 9 Nov 2023, In: Small. 20.2022, 12, 8 p., 2307515.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    The Subsidence Prediction Method Update: A New Unifying Influence Function for Shape Deviations and Asymmetry

    Babaryka, A., 9 Nov 2023.

    Research output: Contribution to conference › Poster › Research

  17. Published

    Erneuerbare Energiegemeinschaften: Eine modelltheoretische Analyse der Rahmenbedingungen in Österreich

    Feichtinger, G., Ringhofer, S. & Posch, W., 8 Nov 2023, In: EW : Magazin für die Energie-Wirtschaft. 2023, 11, p. 10-24 15 p.

    Research output: Contribution to journal › Article › Research

  18. Published

    ISRU

    Hartlieb, P., Sifferlinger, N. A., Fimbinger, E., Höber, D. & Taschner, A., 8 Nov 2023.

    Research output: Contribution to conference › Poster › Transfer

  19. Published

    NASA RASSOR Bucket Drum Challange

    Fimbinger, E., 8 Nov 2023.

    Research output: Contribution to conference › Poster › Transfer

  20. Published

    SUJECO - Sustainable Jetfuel from CO2

    Ellersdorfer, M., 8 Nov 2023.

    Research output: Contribution to conference › Poster › Transfer

  21. Published

    Physikalisch mechanische Verbundauftrennung von Photovoltaik Modulen durch Wasserstrahlschneiden

    Azizi, F., Spitzer, U., Perndorfer, E. & Nigl, T., 7 Nov 2023.

    Research output: Contribution to conference › Poster › Research

  22. Published

    Deformation and failure behavior of nanocrystalline WCu

    Burtscher, M., Alfreider, M., Kainz, C. & Kiener, D., 6 Nov 2023, In: Materials Science and Engineering A. 887.2023, 6 November, 9 p., 145760.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    In-situ microscopy methods for imaging high-temperature microstructural processes – Exploring the differences and gaining new potentials

    Lumper, L., Schaffar, G. J. K., Sommerauer, M. & Maier-Kiener, V., 6 Nov 2023, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 887.2023, 6 November, 9 p., 145738.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    On-Demand Activation of Transesterification by Chemical Amplification in Dynamic Thiol-Ene Photopolymers

    Alabiso, W., Sölle, B., Reisinger, D., Guedes de la Cruz, G. D. C., Schmallegger, M., Grießer, T., Rossegger, E. & Schlögl, S., 6 Nov 2023, In: Angewandte Chemie - International Edition. 62.2023, 45, 6 p., e202311341.

    Research output: Contribution to journal › Article › Research › peer-review

  25. E-pub ahead of print

    Controlling the Glassy State toward Structural and Mechanical Enhancement: Additive Manufacturing of Bulk Metallic Glass Using Advanced Laser Beam Shaping Technology

    Hadibeik Neishaboori, S., Ghasemi‐Tabasi, H., Burn, A., Lani, S., Spieckermann, F. & Eckert, J., 3 Nov 2023, (E-pub ahead of print) In: Advanced functional materials. 34.2024, 12, 15 p., 2311118.

    Research output: Contribution to journal › Article › Research › peer-review

  26. E-pub ahead of print

    Determining the recycled content in cement: A study of Austrian cement plants

    Enengel, M., Viczek, S. A. & Sarc, R., 3 Nov 2023, (E-pub ahead of print) In: Resources, Conservation and Recycling. 199.2023, December, 7 p., 107276.

    Research output: Contribution to journal › Article › Research › peer-review

  27. E-pub ahead of print

    In-situ X-ray diffraction study of the oxidation behavior of arc-evaporated TiAlSiN coatings with low Al contents

    Moritz, Y., Saringer, C., Tkadletz, M., Fian, A., Czettl, C., Pohler, M. & Schalk, N., 3 Nov 2023, (E-pub ahead of print) In: Surface & coatings technology. 475.2023, 25 December, 10 p., 130161.

    Research output: Contribution to journal › Article › Research › peer-review

  28. E-pub ahead of print

    A first archeomagnetic record from the South Atlantic: Investigation of a lime kiln on st. Helena

    Arneitz, P. & Schnepp, E., 2 Nov 2023, (E-pub ahead of print) In: Journal of Archaeological Science: Reports. 52.2023, December, 7 p., 104268.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Emissivity measurements conducted on intermetallic γ-TiAl-based alloys for aeronautical applications

    Usategui, L., López-Ferreno, I., Echániz, T., Sainz-Menchón, M., Musi, M., Clemens, H. & López, G. A., 1 Nov 2023, In: Journal of Materials Research and Technology. 27.2023, November-December, p. 3170-3179 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Novel test-rig for compaction behaviour analysis of textile reinforcements for improved RTM-process replication

    Bender, M. & Fauster, E., 1 Nov 2023, In: Advanced Manufacturing: Polymer and Composites Science. 9.2023, 1, 5 p., 2263828.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    On poroelastic strain energy degradation in the variational phase-field models for hydraulic fracture

    You, T. & Yoshioka, K., 1 Nov 2023, In: Computer methods in applied mechanics and engineering. 416.2023, 1 November, 30 p., 116305.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Reactively-sputtered super-hydrophilic ultra-thin titania films deposited at 120°C

    Kaidatzis, A., Mouti, N.-M., Arfanis, M., Papadimitropoulos, G., Mitterer, C., Falaras, P. & Giannakopoulos, K., 1 Nov 2023, In: Materials Research Express : MRX. 10.2023, 11, 9 p., 115501.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Revolutionizing fiber-reinforced thermoplastic composite recycling : the LightCycle project's journey towards energy-efficient upcycling and quality material regeneration

    Krempl, N. & Shahroodi, Z., 1 Nov 2023, 60th Ilmenau Scientific Colloquium. p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Structure and cryogenic mechanical properties of severely deformed nonequiatomic alloys of Fe–Mn–Co–Cr system

    Tabachnikova, E. D., Hryhorova, T. V., Smirnov, S. N., Kolodiy, I. V., Shapovalov, Y. O., Levenets, A. V., Shumilin, S. E., Kashuba, I. V., Tikhonovsky, M. A., Spieckermann, F., Zehetbauer, M. J., Schafler, E., Huang, Y. J. & Langdon, T. G., 1 Nov 2023, In: Low temperature physics. 49.2023, 11, p. 1423-1434 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Einfluss der Düsenparameter auf die Kühlbedingungen in der Sekundärkühlzone einer Brammengießanlage

    Taferner, M., Laschinger, J. (Co-editor), Bernhard, C. (Co-editor), Bernhard, M. C. (Co-editor) & Ilie, V.-S. (Co-editor), Nov 2023, In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 11, p. 536-542 7 p.

    Research output: Contribution to journal › Article › Research

  36. Published

    Elucidating the Role of Honey Bees as Biomonitors in Environmental Health Research

    Mair, K. S., Irrgeher, J. & Haluza, D., Nov 2023, In: Insects : open access journal. 14.2023, 11, 17 p., 874.

    Research output: Contribution to journal › Review article › peer-review

  37. Published

    Industrial Excess Heat - INXS: Erhebung industrieller Abwärmepotenziale in Österreich

    Hammer, A., Lachner, E., Kienberger, T., Gruber-Glatzl, W., Pfleger, J., Stöger, A., Reuter, S., Schmidt, R.-R., Moser, S. & Jauschnik, G., Nov 2023, Wien. 148 p.

    Research output: Book/Report › Commissioned report › Research

  38. Published

    Mineral Wool Waste as Supplementary Cementitious Material - A Novel Thermochemical Treatment Approach

    Doschek-Held, K., Krammer, A., Steindl, F. R., Sattler, T. M. & Juhart, J., 31 Oct 2023, p. 196-198. 3 p.

    Research output: Contribution to conference › Paper › peer-review

  39. Published

    Preliminary sustainability plan

    Hauzinger, E., Arnaud, N., Marsella, M. & Spagnuolo, F., 31 Oct 2023, Preparatory Phase for the Einstein Telescope Gravitational Wave Observatory: Milestone 9.1.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  40. Published

    Advancements towards a smart waste factory

    Khodier, K., 30 Oct 2023.

    Research output: Contribution to conference › Poster › Research

  41. Published

    Beyond the limits of data-driven models: bringing physical simulation to waste engineering

    Khodier, K., 30 Oct 2023.

    Research output: Contribution to conference › Poster › Research

  42. Published

    Feasibility Study for Finding Mathematical Approaches to Describe the Optimal Operation Point of Sensor-Based Sorting Machines for Plastic Waste

    Friedrich, K., Kuhn, N. E., Pomberger, R. & Koinig, G., 30 Oct 2023, In: Polymers. 15.2023, 21, 18 p., 4266.

    Research output: Contribution to journal › Article › Research › peer-review

  43. E-pub ahead of print

    The Behavior of Phosphorus in the Hydrogen-Based Direct Reduction—Smelter Ironmaking Route

    Pfeiffer, A., Thiele, K., Zheng, H., Mali, H., Wimmer, G. & Schenk, J., 27 Oct 2023, (E-pub ahead of print) In: Steel research international. 95.2024, 11, 9 p., 2300268.

    Research output: Contribution to journal › Article › Research › peer-review

  44. E-pub ahead of print

    Untersuchung der Performance eines fluorfreien Gießpulvers auf einer Pilotanlage

    Riedler, S., Gruber, N., Marschall, I., Ilie, V.-S. & Klösch, G., 27 Oct 2023, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 11, p. pages 515–520 6 p.

    Research output: Contribution to journal › Article › Research

  45. Published

    Einfluss von Kohlenstoff auf das Aufschmelzverhalten eines Gießpulvers bei hohen Heizraten

    Gruber, N., 25 Oct 2023, In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 10, p. 521–526 6 p.

    Research output: Contribution to journal › Article › Research

  46. Published

    Some Considerations on Austenite Grain Growth Kinetics from High-Temperature Laser Scanning Confocal Microscopy Observations

    Bernhard, C., Kern, M. & Bernhard, M. C., 25 Oct 2023, In: Steel research international. 95.2024, 11, 10 p., 2300547.

    Research output: Contribution to journal › Review article › peer-review

  47. Published

    Bestimmung des pvT-Verhaltens für unterschiedliche MIM-Feedstocks

    Duretek, I., 24 Oct 2023, Leoben. 8 p.

    Research output: Book/Report › Commissioned report › Research

  48. Published

    La0.6Sr0.4Co0.2Fe0.8O3-δ – Ce0.9Gd0.1O1.95 composite electrodes for application in solid oxide co-electrolysis cells

    Buxbaum, B., Egger, A. (Co-editor), Brunner, R. (Co-editor) & Bucher, E. (Co-editor), 24 Oct 2023.

    Research output: Contribution to conference › Poster › Research

  49. Published

    Multienergiesystemmodellierung von energieträgerübergreifender Netzinfrastruktur

    Wallner, S., Steinegger, J. & Kienberger, T., 19 Oct 2023.

    Research output: Contribution to conference › Poster › Research

  50. Published

    Synthesis and characterization of bio-based transesterification catalysts for green 3D-printable dynamic photopolymers

    Sölle, B., Shaukat, U., Rossegger, E. & Schlögl, S., 19 Oct 2023, In: Polymer Chemistry. 44.2023, 14, p. 4994-5003 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Accepted/In press

    Designing Product Supply Chain Strategy Using Business Model Canvas and Axiomatic Design to Improve Profitability

    Kittichosatsawat, Y., Rauch, E., Woschank, M. & Yaibuathet Tippayawong, K., 18 Oct 2023, (Accepted/In press) In: Journal of engineering sciences = Žurnal inženernych nauk. 10.2023, 1 ???, p. 1-22 (in press) 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Impact of Multiple Reprocessing on Properties of Polyhydroxybutyrate and Polypropylene

    Main, P., Petersmann, S., Wild, N., Feuchter, M., Duretek, I., Edeleva, M., Ragaert, P., Cardon, L. & Lucyshyn, T., 18 Oct 2023, In: Polymers. 15.2023, 20, 24 p., 4126.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Microgravity studies of solidification patterns in model transparent alloys onboard the International Space Station

    Akamatsu, S., Bottin-Rousseau, S., Witusiewicz, V., Hecht, U., Plapp, M., Ludwig, A., Mogeritsch, J. P., Serefoglu, M., Bergeon, N., Mota, F. L., Sturz, L., Zimmermann, G., McFadden, S. & Sillekens, W., 18 Oct 2023, In: npj Microgravity. 2023, 9, 12 p., 83.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    From unlikely pairings to functional nanocomposites: FeTi–Cu as a model system

    Schweiger, L., Kiener, D., Burtscher, M., Schafler, E., Mori, G. K., Spieckermann, F. & Eckert, J., 17 Oct 2023, In: Materials today advances. 20.2023, December, 13 p., 100433.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Middle Aptian Orbitolinid limestones in Belgrade (Serbia): microfacies and depositional environment

    Đorđević, B., Gawlick, H.-J., Djerić, N., Schlagintweit, F. & Radonjić, M., 16 Oct 2023, In: Geologia Croatica. 76.2023, 3, p. 147-156 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Tension-after-impact (TAI) performance and 3D damage visualization of carbon-fiber epoxy composites with adhesively bonded patch repairs

    Röper, F., Sommacal, S., Compston, P., Tauchner, J., Wolfahrt, M. & Pinter, G. G., 15 Oct 2023, In: Composite structures. 322.2023, 15 October, 11 p., 117338.

    Research output: Contribution to journal › Article › Research › peer-review

  57. E-pub ahead of print

    Thermographic Estimation of the Area and Depth of Buried Heat Sources for Nondestructive Characterization of Horizontal Defects

    Mendioroz, A., Salazar, A., Lasserre, P., Oswald-Tranta, B. & Tuschl, C., 15 Oct 2023, (E-pub ahead of print) In: Journal of Nondestructive Evaluation. 42.2023, 4, 14 p., 91.

    Research output: Contribution to journal › Article › Research › peer-review

  58. E-pub ahead of print

    Numerical treatment of reactive diffusion using the discontinuous Galerkin method

    Flachberger, W., Svoboda, J., Antretter, T., Petersmann, M. & Leitner, S., 13 Oct 2023, (E-pub ahead of print) In: Continuum Mechanics and Thermodynamics. 36.2024, January, p. 61-74 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    The stochastic Klausmeier system and a stochastic Schauder-Tychonoff type theorem

    Hausenblas, E. & Tölle, J. M., 13 Oct 2023, In: Potential analysis : an international journal devoted to the interactions between potential theory, probability theory, geometry and functional analysis. 61.2024, August, p. 185-246 62 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Erfolg durch nachhaltiges Energie- und Ressourcenmanagement

    Posch, W. (Publisher), Vorbach, S. (Publisher), Zsifkovits, H. (Publisher) & Feichtinger, G. (Publisher), 12 Oct 2023, Rainer Hampp ed. Baden-Baden, Germany. 243 p. (Sustainability Management for Industries; vol. 10)

    Research output: Book/Report › Book › Research

  61. Published

    Highly textured 3D-printed translucent alumina through pressure-assisted sintering

    Nečina, V., Hofer, A.-K., Bermejo, R. & Pabst, W., 12 Oct 2023, In: Open ceramics. 16.2023, December, 6 p., 100487.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Integration von Nachhaltigkeitsaspekten in Investitionsentscheidungen: Konzepte und Überlegungen für eine Realisierung auf Projektebene

    Feichtinger, G. & Posch, W., 12 Oct 2023, Erfolg durch nachhaltiges Energie- und Ressourcenmanagement. p. 1 14 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  63. Published

    Material data determination for one ceramic CIM-feedstock for injection molding simulation using SIGMASOFT®

    Duretek, I., 12 Oct 2023, 15 p.

    Research output: Book/Report › Commissioned report › Research

  64. Published

    Methane Pyrolysis in a Liquid Metal Bubble Column Reactor for CO2-Free Production of Hydrogen

    Neuschitzer, D., Scheiblehner, D., Antrekowitsch, H., Wibner, S. & Sprung, A., 12 Oct 2023, In: Energies : open-access journal of related scientific research, technology development and studies in policy and management. 16.2023, 20, 20 p., 7058.

    Research output: Contribution to journal › Article › Research › peer-review

  65. E-pub ahead of print

    Multiple transition temperature enhancement in superconducting TiNbMoTaW high entropy alloy films through tailored N incorporation

    Pristáš, G., Gruber, G., Orendáč, M., Bačkai, J., Kačmarčík, J., Košuth, F., Gabáni, S., Szabó, P., Mitterer, C. & Flachbart, K., 12 Oct 2023, (E-pub ahead of print) In: Acta materialia. 262.2024, 1 January, 8 p., 119428.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Der Aufbereiter Die Aufbereiterin 2023

    Flachberger, H., Hartig, G., Prem, D., Böhm, A., Penz, D., Öfner, W., Fimbinger, E., Friedrich, K., Kemper, D., Krukenfellner, P., Waldl, W., Zeismann, B. & Pölzl, C., 11 Oct 2023, Der Aufbereiter Die Aufbereiterin 2023.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Development of an online analyser to meet challenging new discharge limits for mercury in flue gas desulphurisation wastewater

    Lancaster, S., Corns, W., Krupp, E. & Feldmann, J., 11 Oct 2023, In: Water quality research journal. 58.2023, 4, p. 288–300 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Extending DGT-based chemical imaging to materials science: In situ assessment of aluminium corrosion at high spatial resolution

    Mukhametzianova, G., Wagner, S., Moshtaghi, M., Eskinja, M., Mori, G. K. & Prohaska, T., 11 Oct 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  69. Published

    On the Simulation of Bearing Faults in Induction Machines

    Floh, F. & Weiß, H., 11 Oct 2023, p. 1-8. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  70. Published

    Zero Waste - Chances and Risks of (not) applying zero waste strategies and the importance of measuring sustainability in the recycling sector.

    Rutrecht, B., Roßkogler, S., Nigl, T. & Pomberger, R., 11 Oct 2023, Sardinia 2023 Proceedings: 19th International Symposium on Waste Management, Resource Recovery and Sustainable Landfilling. Cagliari

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. E-pub ahead of print

    Fabrication of bulk delta-phase Zirconium Hydride from Zircaloy-4 for use as moderators in microreactors

    Parkison, D., Tunes, M., Nizolek, T. J., Saleh, T. A., Hosemann, P. M. & Kohnert, C., 10 Oct 2023, (E-pub ahead of print) In: Scripta Materialia. 239.2024, 15 January, 7 p., 115771.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Fire Incidents in Waste Management and Circular Economy The Results of Long term Monitoring and Benefits of Improved Risk Management

    Nigl, T. & Mostböck, I., 10 Oct 2023.

    Research output: Contribution to conference › Paper

  73. Published

    The effect of different rock mass properties on deformation distribution detected with intelligent rock bolts in underground mining

    Varelija, M., Nöger, M., Hartlieb, P., Dendl, D. & Moser, P., 10 Oct 2023. 6 p.

    Research output: Contribution to conference › Poster › Research › peer-review

  74. Published

    Advanced Structure Modelling Using the Bonded-Particle Method: Enabling Complex Capabilities for Structures in DEM Simulations

    Fimbinger, E., 9 Oct 2023. 13 p.

    Research output: Contribution to conference › Paper › peer-review

  75. Published

    Application of hybrid machine learning based quality control in daily site management

    Zöhrer, A., Winter, V., Terbuch, A., O'Leary, P. & Khalilimotlaghkasmaei, N., 9 Oct 2023, Proceedings of the ISRM 15th International Congress on Rock Mechanics and Rock Engineering & 72nd Geomechanics Colloquium : Challenges in Rock Mechanics and Rock Engineering. Salzburg, p. 569-574 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Energy Transition and Renewable Energies in Waste Management and Circular Economy – Potentials and Obstacles in Reducing Energy Dependency

    Nigl, T., Scheiblauer, J. & Bouvier-Schwarz, T., 9 Oct 2023.

    Research output: Contribution to conference › Paper

  77. Published

    Material characterisation of industrial textile waste under consideration of various processing conditions

    Jenull, U., Duretek, I., Lucyshyn, T. & Holzer, C., 9 Oct 2023, Proceedings SARDINIA 2023. p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Unravelling calcite-to-aragonite evolution from a subsurface fluid - Formation pathway, interfacial reactions and nucleation effects

    Eichinger, S., Boch, R., Baldermann, A., Goetschl, K., Wenighofer, R., Hoffmann, R., Stamm, F., Hippler, D., Grengg, C., Immenhauser, A. & Dietzel, M., 9 Oct 2023, In: Chemical geology. 641.2023, 20 December, 32 p., 121768.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Adaptive Algorithms for Meta-Induction

    Ortner, R., 7 Oct 2023, In: Journal for general philosophy of science = Zeitschrift für allgemeine Wissenschaftstheorie. 54.2023, 3, p. 433–450 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. E-pub ahead of print

    Investigating the impact of manufacturing conditions on crack growth rate in nitrile butadiene rubber for enhanced service life – Part 01

    Gehling, T., Kerschbaumer, R. C., Pinter, G. G., Fasching, M. A., Schwarz, T. & Schieppati, J., 7 Oct 2023, (E-pub ahead of print) In: Results in Engineering. 20.2023, December, 8 p., 101484.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    RecAlcle: Supporting manual sorting workers with Aritifical Intelligence and Machine Learning - Framework and Data Acquisition

    Aberger, J., Khodier, K. & Sarc, R., 6 Oct 2023, Proceedings of Sardinia 2023.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. E-pub ahead of print

    Machine learning driven prediction of mechanical properties of rolled aluminum and development of an in-situ quality control method based on electrical resistivity measurement

    Hartl, K., Sorger, M., Weiß, H. & Stockinger, M., 5 Oct 2023, (E-pub ahead of print) In: Journal of manufacturing processes. 106.2023, 24 November, p. 158-177 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. E-pub ahead of print

    High-temperature microstructure evolution of an advanced intermetallic nano-lamellar γ-TiAl-based alloy and associated diffusion processes

    Nó, M. L., Klein, T., Clemens, H. & San Juan, J. M., 4 Oct 2023, (E-pub ahead of print) In: Acta materialia. 261.2023, 1 December, 13 p., 119380.

    Research output: Contribution to journal › Article › Research › peer-review

  84. E-pub ahead of print

    Observations of the occurrence and disappearance of peritectic couple growth performed under microgravity conditions

    Ludwig, A. & Mogeritsch, J. P., 4 Oct 2023, (E-pub ahead of print) In: Scripta Materialia. 239.2024, 15 January, 6 p., 115802.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Precipitation behavior of hexagonal carbides in a C containing intermetallic γ-TiAl based alloy

    Burtscher, M., Weißensteiner, I., Wartbichler, R., Kirchheimer, K., Bernhard, C., Kiener, D. & Clemens, H., 4 Oct 2023, In: Journal of alloys and compounds. 969.2023, 25 December, 7 p., 172400.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Redox cationic frontal polymerization: a new strategy towards fast and efficient curing of defect-free fiber reinforced polymer composites

    Malik, M. S., Wolfahrt, M. & Schlögl, S., 4 Oct 2023, In: RSC Advances. 13.2023, 41, p. 28993-29003 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Decarbonizing Construction Material Supply Chains: An Innovative Approach to Intermodal Transportation

    Miklautsch, P., Woschank, M. & Heißenberger, J., 1 Oct 2023, Construction Logistics, Equipment, and Robotics: Proceedings of the CLEaR Conference 2023. p. 123-136

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  88. Published

    Engineering Excellence for the Mobility Value Chain

    Zunk, B. M., Woschank, M., Pacher, C., Glinik, M., Vorbach, S., Koch, V. & Jantschgi, J., 1 Oct 2023, Proceedings of ICL2023 – 26th International Conference on Interactive Collaborative Learning. p. 1573-1584

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  89. Published

    The Missing Link: How to Bridge the Gap to Zero-Carbon Logistics

    Miklautsch, P. & Woschank, M., 1 Oct 2023, Erfolg durch nachhaltiges Energie- und Ressourcenmanagement. Vol. 10. p. 25-40

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  90. Published

    Classification of plastic waste packaging multilayer films using handheld near-infrared (NIR) spectrometer

    Stipanovic, H., Arth, P., Koinig, G. & Tischberger-Aldrian, A., Oct 2023, Sardinia 2023 Proceedings : 19th International Symposium on Waste Management, Resource Recovery and Sustainable Landfilling. Cagliari

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Comparison between image based and tabular data-based inclusion class categorization

    Ramesh Babu, S., Musi, R. & Michelic, S. K., Oct 2023, In: Praktische Metallographie/Practical Metallography. 60.2023, 10, p. 660-675 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Comprehensive Characterisation of Lightweight Packaging Waste to improve Recycling

    Kuhn, N. E., Koinig, G. & Tischberger-Aldrian, A., Oct 2023. 10 p.

    Research output: Contribution to conference › Paper

  93. Published

    Continuous functions with impermeable graphs

    Buczolich, Z., Leobacher, G. & Steinicke, A., Oct 2023, In: Mathematische Nachrichten. 296.2023, 10, p. 4778-4805 28 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Crack penetration versus deflection in extrusion-based additive manufacturing – Impact of nozzle temperature and morphology

    Waly, C., Petersmann, S. & Arbeiter, F., Oct 2023, In: Theoretical and Applied Fracture Mechanics. 127.2023, October, 13 p., 104032.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    DEVELOPMENT OF AN ASSESSMENT METHOD FOR UNAMBIGUOUS VALIDATION OF MACHINE PERFORMANCE

    Lasch, T., Khodier, K., Feyerer, C. & Sarc, R., Oct 2023, Proceedings SARDINIA 2023.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Efficient Calibration of Discrete-Element-Method Simulations for Waste Applications using Particle Sensor Data and Artificial Intelligence

    Khodier, K., Krabichler-Mark, A.-L., Werner, I., Rizvan, A. & Varsh, Y., Oct 2023, Proceedings SARDINIA 2023.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. E-pub ahead of print

    Großtechnische experimentelle Forschung im Digital Waste Research Lab und Digitale Abfallanalytik und -behandlung

    Kandlbauer, L., Sarc, R. & Pomberger, R., Oct 2023, (E-pub ahead of print) In: Österreichische Wasser- und Abfallwirtschaft : ÖWAW . 76.2024, Februar 2024, p. 32-41 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Metal–Matrix Composites from High-Pressure Torsion with Functionalized Material Behavior

    Lemkova, V., Todt, J., Motz, C. & Schaefer, F., Oct 2023, In: Advanced Engineering Materials. 25.2023, 20, 12 p., 2201565.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Modelling Periodic Measurement Data Having a Piecewise Polynomial Trend Using the Method of Variable Projection

    Handler, J., Ninevski, D. & O'Leary, P., Oct 2023, IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Nanoscale printed tunable specimen geometry enables high-throughput miniaturized fracture testing

    Jelinek, A., Žák, S., Cordill, M. J., Kiener, D. & Alfreider, M., Oct 2023, In: Materials and Design. 234.2023, October, 17 p., 112329.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    New insights into hydrogen trapping and embrittlement in high strength aluminum alloys

    Safyari, M., Khossossi, N., Meisel, T., Dey, P., Prohaska, T. & Moshtaghi, M., Oct 2023, In: Corrosion science. 223.2023, October, 13 p., 111453.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...12 13 14 15 16 17 18 19 ...339 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
Austria
  • Main phone number: +43 3842 402