Montanuniversität

Organisational unit: University

1 - 50 out of 33,826Page size: 50

Research output

  1. 2025
  2. Published

    Exploring Nanoparticle and Thin Film Bonding Characteristics onto Carbon Fibers using Atomic Force Microscopy

    Haiden, L., Feuchter, M., Kratzer, M., Brunner, A. J., Pansare, A. V., Barbezat, M. & Pinter, G., 25 Mar 2025.

    Research output: Contribution to conference › Poster › Research

  3. Published

    Optimized Reuse of Tunnel and Excavation Materials in Civil Engineering and Tunnel Construction using AI-supported Sensor Technologies: Optimierte Verwertung von Aushubmaterialien im Tief- und Tunnelbau durch KI gestützte Sensortechnologien

    Galler, R., Sedlazeck, K. P., Schneider, D., Hauzinger, E. & Findl, M. J., 25 Mar 2025, In: Berg- und hüttenmännische Monatshefte : BHM. 2025, 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Tracing metal sources in orogenic gold deposits of the Timburu Goldfield, Meratus, Indonesia: A Geochemical and Statistical Approach

    Hakim, A. Y. A., Dijkstra, A. H., Melcher, F., Bertrandsson Erlandsson, V. & Feichter, M., 14 Mar 2025, In: Journal of Asian earth sciences. 285.2025, 15 May, 20 p., 106561.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Transforming breakfast bio-waste into hydrogen storage materials

    Stock, S., Trost, C. O. W., Seyffertitz, M., Selinger, J., Gupta, R. K., Tampaxis, C., Steriotis, T., Rebholz, C., Mitterer, C., Paris, O. & Kostoglou, N., 14 Mar 2025, In: International Journal of Hydrogen Energy . 114.2025, 31 March, p. 519-533 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Seltene Erden: Eigentlich kein Problem

    Melcher, F., 11 Mar 2025

    Research output: Non-textual form › Digital or Visual Products › Transfer

  7. Published

    Das Anthropozän – Frank Melcher zum ‘Erdzeitalter des Menschen’

    Melcher, F., 10 Mar 2025

    Research output: Non-textual form › Digital or Visual Products › Transfer

  8. Published

    CaCTUS – Carbon Capture & Transformation, Utilization and Storage: CCUS in Österreich – Potenziale, Technologien, Folgenabschätzung und Einordnung der rechtlichen Rahmenbedingungen

    Wolf-Zöllner, P., Böhm, H., Veseli , A., Hochmeister, S., Kulich, J., Fazeni-Fraisl , K., Lehner, M., Kienberger, T., Ott, H., Fleischhacker, J., Sachs, N. & Kapfer, M., 7 Mar 2025, In: Berg- und hüttenmännische Monatshefte : BHM. ??? Stand: 17. März 2025

    Research output: Contribution to journal › Article › Research

  9. Published

    Wasserstoff als nachhaltiger Energieträger – Dimensionieren im Maschinenbau

    Grun, F., Oberreiter, P. & Renhart, P., 4 Mar 2025, 20. Kraftfahrzeug – Symposium - Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    The Discrete Element Method: Advanced Topics - Unit 6: Flexible Particles and Structures

    Fimbinger, E., 3 Mar 2025

    Research output: Non-textual form › Digital or Visual Products › Transfer

  11. Published

    Unlocking the Value of Electronic Waste: Inter-laboratory Insights into Critical Element Analysis

    Lancaster, S. T., Sahlin, E., Oelze, M., Ostermann, M., Vogl, J., Laperche, V., Touze, S., Ghestem, J. P., Dalencourt, C., Gendre, R., Stammeier, J., Klein, O., Pröfrock, D., Košarac, G., Jotanovic, A., Bergamaschi, L., Di Luzio, M., D'Agostino, G., Jaćimović, R. & Eberhard, M. & 9 others, Feiner, L., Trimmel, S., Rachetti, A., Sara-Aho, T., Roethke, A., Michaliszyn, L., Pramann, A., Rienitz, O. & Irrgeher, J., 3 Mar 2025.

    Research output: Contribution to conference › Poster › Research

  12. Published

    Damping of vibrations of a rod by dissipation due to diffusion

    Svoboda, J., Hackl, K. & Fischer, F.-D., 1 Mar 2025, In: Scripta Materialia. 257.2025, 1 March, 5 p., 116461.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Correlating grain boundary character and composition in 3-dimensions using 4D-scanning precession electron diffraction and atom probe tomography

    Das, S. M., Harrison, P., Srikakulapu, K., Zhou, X., Ludwig, W., Rauch, E. F., Herbig, M. & Liebscher, C., 28 Feb 2025, In: Small Methods. 2025, 10 p., 2401650.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    New Prediction Method of Subsidence Based on the Numerical Displacement Analysis: A Study Case of Deep-Buried Thick Alluvial Layer and Thin Bedrock

    Wang, J., Wu, S., Wang, Z., Babaryka, A., Tost, M. & Li, M., 28 Feb 2025, In: Rock mechanics and rock engineering. ??? Stand: 24. März 2025

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    A Hybrid Update of the Fe-Si System by DSC, Thermodynamic Modeling and Statistical Learning from Ladle Refining Data of Electrical Steels

    Bernhard, M. C., Kavic, D., Presoly, P., Wi, T.-G., Park, W.-B., Rössler, R., Jungreithmeier, A., Ilie, S., Bernhard, C. & Kang, Y.-B., 26 Feb 2025, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 56.2025, ??? Stand: 18. März 2025, 28 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Assessment of measures to reduce corporate carbon emissions along the production and energy processes

    Feichtinger, G., Mark, D. & Posch, W., 26 Feb 2025, Organisation und Dynamik von Energiemärkten und Investitionen in Infrastrukturen: Balance zwischen langfristigen Klimazielen und aktuellen Realitäten. p. 1 19 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Bruchzähigkeitsmessung mittels Femtosekunden-Laserablation

    Munz, M., Krug, C. & Lube, T., 26 Feb 2025.

    Research output: Contribution to conference › Poster › Transfer › peer-review

  18. Published

    Ein Verfahren zur Festigkeitsprüfung von additiv hergestellten Keramiken

    Lube, T., Staudacher, M. & Scheithauer, U., 26 Feb 2025.

    Research output: Contribution to conference › Poster › Transfer › peer-review

  19. Published

    Inter- and Transgranular Fracture in Ceramics with Tailored Microstructure

    Jabr, A., Salamon, D. & Bermejo Moratinos, R., 26 Feb 2025.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Schadenstoleranz von 3D-gedruckten Keramiken mit eingestelltem Gefüge

    Schlacher, J., Nohut, S., Schwentenwein, M. & Bermejo Moratinos, R., 26 Feb 2025.

    Research output: Contribution to conference › Poster › Transfer › peer-review

  21. Published

    Extrinsic and intrinsic strength of amorphous olivine films

    Jarnot, J., Dohmen, R., Trost, C. O. W., Mitterer, C., Cordier, P. & Glushko, O., 25 Feb 2025, In: European journal of mineralogy. 37.2025, 1, p. 91-99 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Kinetic and Process Modeling of Guerbet Coupling Chemistry over Cu-Mg-Al Mixed Oxides

    Chavarrio Canas, J., Markowitsch, C., Votava, E., Lehner, M. & Huber, G. W., 25 Feb 2025, In: EES Catalysis. 3.2025, 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Promoting sustainable practices through education: Insights from the SAFE living lab initiative

    Murphy, M. & Obenaus-Emler, R., 25 Feb 2025, p. 1575-1583. 9 p.

    Research output: Contribution to conference › Paper › peer-review

  24. Published

    Shaping the future of mining: Balancing responsible extraction of resources and related social impacts through the PRO SLO education initiative

    Murphy, M. & Bertignoll, H., 25 Feb 2025, p. 1584-1590. 7 p.

    Research output: Contribution to conference › Paper › peer-review

  25. Published

    Der Slalom des Ski-Recyclings

    Höfler, K. & Zidar, D., 22 Feb 2025, 2 p.

    Research output: Other contribution › Research

  26. Published

    Resolving the fundamentals of the J-integral concept by multi-method in situ nanoscale stress-strain mapping

    Meindlhumer, M., Alfreider, M., Sheshi, N., Hohenwarter, A., Todt, J., Rosenthal, M., Burghammer, M., Salvati, E., Keckes, J. & Kiener, D., 22 Feb 2025, In: Communications materials. 2025, 6, 15 p., 35.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Effect of tramp elements on the microstructural evolution of a ferritic-pearlitic steel

    Hatzenbichler, L., Vincely, C., Haslberger, P., Galler, M., Glushko, O., Holec, D., Clemens, H. & Schnitzer, R., 21 Feb 2025, In: Practical metallography = Praktische Metallographie. 62.2025, 3, p. 148-175 28 p.

    Research output: Contribution to journal › Article › Research

  28. Published

    Exploring Local Attitudes Towards Sustainable Tourism Development and Community Resilience in Skadar Lake and Durmitor National Parks, Montenegro: A Socio-Demographic Analysis

    Manojlović, B., Cvetković, V. M., Renner, R., Grozdanić, G. & Perosevic, N., 21 Feb 2025

    Research output: Other contribution › Research

  29. Published

    Influence of carbon and sulfur on austenite grain boundary mobility

    Kern, M., Bernhard, M. C., Scheiber, D., Suhane, A., Militzer, M. & Bernhard, C., 21 Feb 2025, In: Acta materialia. 288.2025, 15 April, 17 p., 120851.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    The Fossil, the Green, and the In-Between: Life Cycle Assessment of Manufacturing Composites with Varying Bio-Based Content

    Kirschnick, U., Ravindran, B., Sieberer, M., Fauster, E. & Feuchter, M., 20 Feb 2025, In: Journal of composites science. 9.2025, 3, 18 p., 93.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    A New Approach Using Multi-Layer Films from Food Waste as a Shrink Film

    Plevová, K., Feuchter, M., Wild, N. & Resch-Fauster, K., 17 Feb 2025, In: Processes. 13.2025, 2, 16 p., 560.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Hydrodynamic performance testing of artificial textures using a novel pin-on-disc test method

    Pusterhofer, M., Maier, M., Scharf, R., Haumer, F. & Grün, F., 17 Feb 2025, In: Frontiers in Mechanical Engineering. 11.2025, 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Obituary Dr. Klaus Peter Jochum

    Meisel, T. C., Jacob, D., Weis, U., Mertz‐Kraus, R., Enzweiler, J., Borisova, A. & Williams, E. A., 17 Feb 2025, In: Geostandards and Geoanalytical Research. ??? Stand: 28. Februar 2025, ??? Stand: 28. Februar 2025, 2 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    On the effect of isotropic and anisotropic dissipative response functions with associated and nonassociated flow on the inelastic behavior of polymeric composites

    Gaddikere Nagaraja, S., Antretter, T. & Schuecker, C., 16 Feb 2025, In: Mechanics of advanced materials and structures. ??? Stand: 28. Februar 2025, ??? Stand: 28. Februar 2025, 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Combined X-ray microdiffraction and micromechanical testing for direct measurement of thin film elastic constants

    Janknecht, R., Hahn, R., Koutná, N., Todt, J., Meindlhumer, M., Davidok, A., Riedl, H., Keckes, J. & Mayrhofer, P. H., 15 Feb 2025, In: Materials and Design. 252.2025, April, 11 p., 113720.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Tailored Recycled Composites: Enhancing the Performance of Injection Moulded Post-Consumer Polypropylene Composites Using Box-Behnken Design

    Shahroodi, Z., Zidar, D., Momeni, V., Arbeiter, F., Duretek, I., Krempl, N., Berger-Weber, G. & Holzer, C., 15 Feb 2025, In: Polymer Testing. 2025, ??? Stand: 17. Februar 2025, 108743.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Navigating the Mining Industry Challenges: An Introduction to the CERA 4in1 Standards

    Nowaz, T., Fernandez Munoz, P., Förster, L., Tost, M., Monfort Climent, D., Olmos Betin, S. & Melcher, F., 14 Feb 2025, In: Berg- und hüttenmännische Monatshefte : BHM. 170.2025, 2, p. 108-115 8 p.

    Research output: Contribution to journal › Article › Research

  38. Published

    Characterization of High-Speed Steels—Experimental Data and Their Evaluation Supported by Machine Learning Algorithms

    Wießner, M. & Gamsjäger, E., 12 Feb 2025, In: Metals : open access journal . 15.2025, 2, 28 p., 194.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Impact of tensile specimen properties on hydrogen embrittlement testing using hollow specimens

    Oberreiter, P., Winter, G., Grun, F. & Drexler, A., 12 Feb 2025.

    Research output: Contribution to conference › Presentation › Research › peer-review

  40. Published

    Lessons from assessing sustainability in the mining and resources sector

    Tost, M., 12 Feb 2025, The Routledge Handbook of Global Sustainability Education and Thinking for the 21st Century.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer › peer-review

  41. Published

    A high-throughput framework for pile-up correction in high-speed nanoindentation maps

    Rossi, E., Duranti, D., Rashid, S., Zitek, M., Daniel, R. & Sebastiani, M., 11 Feb 2025, In: Materials and Design. 251.2025, March, 18 p., 113708.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Application of high-temperature confocal scanning laser microscopy to investigate non-metallic inclusions in steel: a review

    Preißer, N., Wang, Y., Cejka, J., Gruber, I., Mu, W. & Michelic, S. K., 11 Feb 2025, In: Journal of iron and steel research international. 32.2025, 2, p. 334-352 19 p., 111030.

    Research output: Contribution to journal › Review article › peer-review

  43. Published

    Crack sensitivity of high-manganese cryogenic steels in initial solidification during continuous casting

    Li, Y., Winkler, J., Presoly, P., Bernhard, C., Qin, X.-F. & Cheng, C.-G., 10 Feb 2025, In: Journal of iron and steel research international. ??? Stand: 17. März, ??? Stand: 17. März, 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. E-pub ahead of print

    Formation of uranium-, vanadium- and chromium-bearing reduction spheroids in karst bauxite of the Unterlaussa mining district (Austria)

    Hampl, F., Dunkl, I., Schmidt, B. C., Bertrandsson Erlandsson, V. & Melcher, F., 10 Feb 2025, (E-pub ahead of print) In: Journal of geochemical exploration. 272.2025, May, 17 p., 107709.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Fatigue Assessment of Precorroded AlSi9Cu3 Specimens Incorporating Short Crack Propagation

    Oberreiter, P., Schönowitz, M., Maier, B. & Grün, F., 9 Feb 2025, In: Fatigue and Fracture of Engineering Materials and Structures. ??? Stand: 27. Februar 2025, ??? Stand: 27. Februar 2025, 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Enhanced dehydrogenation and regeneration behavior of LiBH4–LiAlH4–MgCl2 in nanoporous carbons

    Hsu, C.-Y., Kostoglou, N., Mitterer, C., Rebholz, C., Chang, C.-K., Chuang, Y.-C. & Wang, C.-Y., 5 Feb 2025, In: International Journal of Hydrogen Energy . 106.2025, 6 March, p. 712-722 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    EU supply chain due diligence (CSDDD): insights from a survey of companies in Austria

    Feichtinger, G. & Posch, W., 3 Feb 2025

    Research output: Non-textual form › Digital or Visual Products › Research

  48. Published

    Impact of annealing and hydrogenation on the superconducting transition temperature of (TiNbMoTaW)Nx high entropy alloy nitride films

    Pristáš, G., Gruber, G., Bačkai, J., Košuth, F., Kölbl, L., Bures, R., Fáberová, M., Gabáni, S., Onufriienko, O., Vorobiov, S., Mitterer, C. & Flachbart, K., 1 Feb 2025, In: Solid State Sciences : SSS. 161.2025, March, p. 1-7 7 p., 107851.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    IT-Einkauf - Lieferanten-Beziehungsmanagement für die Beschaffung von IT-Systemen und IT-Plattformen

    Zsifkovits, H., 1 Feb 2025, Handbuch IT-System- und Plattformmanagement . Tiemeyer, E. (ed.). 3. Auflage ed. München, p. 487-512 25 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer

  50. Published

    Towards high-strength electrolyte-supported solid oxide fuel cells

    Jana, A., Kraleva, I., Schlacher, J., Supancic, P., Egger, A., Bucher, E. & Bermejo, R., Feb 2025, In: Journal of the European Ceramic Society. 45, 2, 116929.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Understanding the lower fracture resistance of cold sintered ceramics

    Jabr, A., Ribul, E., Salamon, D. & Bermejo, R., Feb 2025, In: Journal of the European Ceramic Society. 45, 2, 116968.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...677 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
Austria
  • Main phone number: +43 3842 402