Departments and Chairs

Organisational unit: Departments and Institutes

51 - 100 out of 33,496Page size: 50

Research output

  1. 2025
  2. Published

    Integration von Umwelt‑, Sozial- und Polit-Aspekten in die Abläufe der Abbauplanung.

    Haindl, A., 14 Jan 2025, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research

  3. Published

    Microstructural features and hydrogen diffusion in bcc FeCr alloys: A comparison between the Kelvin probe- and nanohardness based-methods

    Rao, J., Sun, B., Ganapathi, A., Dong, X., Hohenwarter, A., Wu, C. H., Rohwerder, M., Dehm, G. & Duarte, M. J., 14 Jan 2025, In: International Journal of Hydrogen Energy. 102.2025, 10 February, p. 1103-1115 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    The catalytic effect of Ni in methane pyrolysis using molten SnNi alloys for hydrogen production

    Scheiblehner, D., Neuschitzer, D., Wibner, S., Sprung, A., Tunes, M. A., Leuchtenmüller, M., Scherr, C., Antrekowitsch, H. & Luidold, S., 14 Jan 2025, In: International Journal of Hydrogen Energy . 102.2025, 10 February, p. 1045-1054 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Tracing the Origin of Oxide Inclusions in Vacuum Arc Remelted Steel Ingots Using Trace Element Profiles and Strontium Isotope Ratios

    Walkner, C., Mukhametzianova, G., Wagner, S., Korp, J., Graf, A., Irrgeher, J., Meisel, T. C. & Prohaska, T., 14 Jan 2025, In: Metals. 15.2025, 1, p. 67 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Electronic structure, phase formation, and defect distribution in the Ba(Ce,Fe,Acc)O3-δ system

    Merkle, R., Hoedl, M. F., Chesnokov, A., Gryaznov, D., Bucher, E., Kotomin, E. A., Sitte, W. & Maier, J., 12 Jan 2025, In: Acta Materialia. 287.2025, 1 April, 10 p., 120739.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Demand Aggregation and Mid-Term Energy Planning Problem on the Business Layer

    Poulios, N., Livada, M. & Melas, E., 9 Jan 2025, Optimization, Discrete Mathematics and Applications to Data Sciences . 1 ed. Springer, p. 117-134

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  8. Published

    Estimation of residual stresses in single crystal sapphire wafers through eigenmode analysis

    Gruber, M., Kreith, J., Lohrasbi, S., Bermejo, R. & Supancic, P. H., 9 Jan 2025, In: Scripta Materialia. 259.2025, 1 April, 5 p., 116538.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Synergistic precipitation reactions in a novel high-temperature Ti-alloy

    Farabi, E., He, X., Obersteiner, D., Musi, M., Neves, J., Klein, T. & Primig, S., 9 Jan 2025, In: Scripta materialia. 259.2025, 1 April, 7 p., 116543.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Phase stability and enhanced mechanical properties of nanocrystalline PVD CrCu coatings

    Burtscher, M., Kainz, C., Dorner, P., Fellner, S., Terziyska, V., Alfreider, M. & Kiener, D., 8 Jan 2025, In: Journal of Materials Research and Technology. 35.2025, March-April, p. 369-378 10 p., 35.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Accurate prediction of structural and mechanical properties on amorphous materials enabled through machine-learning potentials: A case study of silicon nitride

    Nayak, G. K., Srinivasan, P., Todt, J., Daniel, R., Nicolini, P. & Holec, D., 6 Jan 2025, In: Computational materials science. 249.2025, 5 February, 11 p., 113629.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Horgen-Käpfnach, the largest Swiss coal deposit: Geology, petrology and geochemistry

    Sachsenhofer, R. F., Aghayeva, V., Ajuaba, S., Kojić, I., Misch, D. & Stojanović, K., 6 Jan 2025, In: International journal of coal geology. 299.2025, 12 February, 20 p., 104684.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Superhydrophilic Titania Coatings on Glass Substrates via the Hydrosol Approach

    Theodorakopoulos, G. V., Arfanis, M., Mouti, N.-M., Kaidatzis, A., Mitterer, C., Giannakopoulos, K. & Falaras, P., 6 Jan 2025, In: Surfaces. 8.2025, 1, 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Variational Phase-Field Fracture Approach in Reactive Porous Media

    Mollaali, M., Yoshioka, K., Lu, R., Montoya, V., Vilarrasa, V. & Kolditz, O., 3 Jan 2025, In: International journal for numerical methods in engineering. 126.2025, 1, e7621.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Very high cycle fatigue properties of short glass fiber reinforced polyetheretherketone (PEEK)

    Fitzka, M., Stadler, G., Schönbauer, B. M., Pinter, G. & Mayer, H., Jan 2025, In: International Journal of Fatigue. 190, 108652.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Contact damage response of alumina-based layered architectures under different loading configurations

    Schlacher, J. C., Stücklberger, F., Jabr, A. & Bermejo, R., 2025, In: Journal of the European Ceramic Society. 45.2025, 3, 8 p., 117037.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Dealing with High-Risk Police Activities and Enhancing Safety and Resilience: Qualitative Insights into Austrian Police Operations from a Risk Perception and Group Dynamic Perspective

    Renner, R., Cvetković, V. & Lieftenegger, N., 2025, In: Preprints : the multidisciplinary preprint platform. 54 p.

    Research output: Contribution to journal › Article › Research

  18. Published

    Detecting downhole drilling events EP 4 189 206 B1

    Elmgerbi, A. (Inventor) & Thonhauser, G. (Inventor), 2025, Patent No. EP 4 189 206 B1

    Research output: Patent

  19. Published

    Dual-functional carbon material with ultra-high surface area for efficient removal of airborne and water pollutants: Mustard gas vapours and aquatic radionuclide (Am 241 and U 232) remediation

    Ioannidis, I., Ioannou, K., Zeiler, S., Mitterer, C., Kostoglou, N., Giannakoudakis, D. A., Pashalidis, I. & Rebholz, C., 2025.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Enhanced dehydrogenation and regeneration behavior of LiBH4–LiAlH4–MgCl2 in nanoporous carbons

    Hsu, C.-Y., Kostoglou, N., Mitterer, C., Rebholz, C., Chang, C.-K., Chuang, Y.-C. & Wang, C.-Y., 2025, In: International Journal of Hydrogen Energy . 2025, 106, p. 712-722

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Extrinsic and intrinsic strength of amorphous olivine films

    Jarnot, J., Dohmen, R., Trost, C. O. W., Mitterer, C., Cordier, P. & Glushko, O., 2025, In: European journal of mineralogy. 2025, 37, p. 91-99

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Finite Element Investigation of the Dynamic Behavior of High-Speed Turnouts with Swing-Nose Crossing

    Sistaninia, M., Daves, W., Bucher, C., Antretter, T. & Gänser, H. P., 2025, Advances in Dynamics of Vehicles on Roads and Tracks III - Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, Rail Vehicles. Huang, W. & Ahmadian, M. (eds.). p. 1047-1058 12 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Impact of annealing and hydrogenation on the superconducting transition temperature of (TiNbMoTaW)Nx high entropy alloy nitride films

    Pristáš, G., Gruber, G., Bačkai, J., Košuth, F., Kölbl, L., Bures, R., Fáberová, M., Gabáni, S., Onufriienko, O., Vorobiov, S., Mitterer, C. & Flachbart, K., 2025, In: Solid State Sciences : SSS. 2025, 161, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Improving contact damage resistance of spinel translucent ceramics through a multi-layer design

    Najafzadehkhoee, A., Jabr, A., Talimian, A., Papsik, R., Drdlik, D., Maca, K., Galusek, D. & Bermejo, R., 2025, In: Journal of the European Ceramic Society. 45.2025, 4, 9 p., 117071.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    In Vivo Assessment on Freeze-Cast Calcium Phosphate-Based Scaffolds with a Selective Cell/Tissue Ingrowth

    Pejchalová, L., Pejchal, J., Roleček, J., Vojníková, M., Chlup, Z., Mařák, V., González-Sánchez, M., Čížková, J. & Salamon, D., 2025, In: ACS Applied Materials and Interfaces. 16.2024, 43, p. 58326-58336 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Kinetic and Process Modeling of Guerbet Coupling Chemistry over Cu-Mg-Al Mixed Oxides

    Chavarrio Canas, J., Markowitsch, C., Votava, E., Lehner, M. & Huber, G. W., 2025, In: EES Catalysis. 2025

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    New Prediction Method of Subsidence Based on the Numerical Displacement Analysis: A Study Case of Deep-Buried Thick Alluvial Layer and Thin Bedrock

    Wang, J., Wu, S., Wang, Z., Babaryka, A., Tost, M. & Li, M., 2025, In: Rock mechanics and rock engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    On the Road Towards Understanding Squats - Metallographic Investigations of Rails

    Gschwandl, T., Spalek, A., Antretter, T. & Daves, W., 2025, Advances in Dynamics of Vehicles on Roads and Tracks III - Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, Rail Vehicles. Huang, W. & Ahmadian, M. (eds.). p. 314-323 10 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Servitization-Strategien für die Prozessindustrie: Wettbewerbsvorteile durch hybride Geschäftsmodelle, Innovation und Service

    Unterreiter, G. & Posch, W., 2025

    Research output: Non-textual form › Digital or Visual Products › Research

  30. Published

    Thermally Treated Residues and By-Products as Components of Waste-Based Alkali-Activated Materials

    Steindl, F. R., Radinger, S., Hassan, A., Rudic, O., Weisser, K., Krammer, A., Doschek-Held, K., Ratz, B., Zögl, I., Raič, S., Mittermayr, F. & Vallazza-Grengg, C., 2025, RILEM Bookseries. p. 53-61 9 p. (RILEM Bookseries; vol. 55).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  31. 2024
  32. Published

    Development of a novel aerosol-lubricated ring-on-liner test methodology

    Gussmagg, J., Pusterhofer, M., Breitegger, M. & Grün, F., 31 Dec 2024, In: Tribologia : Finnish Journal of Tribology. 41.2024, 3-4, p. 49-51 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Qualitative insights into cultural heritage protection in Serbia: Addressing legal and institutional gaps for disaster risk resilience

    Cvetković, V., Gole, S., Renner, R., Jakovljevic, V. & Lukić, T., 31 Dec 2024, In: Open Geosciences. 16.2025, 1, 41 p., 20220755.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Revealing the hidden polysulfides in solid-state Na-S batteries: How pressure and electrical transport control kinetic pathways

    Nguyen, H. Q., Kanedal, M. D., Todt, J., Jin, F., Do, Q., Zalka, D., Maximenko, A., Stoian, D., Schell, N., Beek, W. V., Boles, S., Keckes, J. & Rettenwander, D., 31 Dec 2024

    Research output: Other contribution › Research

  35. Published

    Reliable Atom Probe Tomography of Cu Nanoparticles Through Tailored Encapsulation by an Electrodeposited Film

    Cicek, A., Knabl, F., Schiester, M., Waldl, H., Rafailovic, L., Tkadletz, M. & Mitterer, C., 30 Dec 2024, In: Nanomaterials. 15.2025, 1, 13 p., 43.

    Research output: Contribution to journal › Article › Research › peer-review

  36. E-pub ahead of print

    Crystallization of Fe74Mo4P10C7.5B2.5Si2 metallic glass: Insights from in-situ synchrotron diffraction and Flash DSC

    Römer, F., Ramasamy, P., Steffny, I., Stoica, M., Lienert, U., Quick, C. R., Hegedüs, Z., Eckert, J. & Spieckermann, F., 27 Dec 2024, (E-pub ahead of print) In: Materials today advances. 25.2025, March, 7 p., 100550.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Impact of Relative Permeability Hysteresis on CO2 Storage in Saline Aquifers

    Khoramian, R., Salaudeen, I., Pourafshary, P., Riazi, M. & Kharrat, R., 27 Dec 2024, In: Greenhouse Gases: Science and Technology. 15.2025, 1, p. 3-12 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Influence of material–material interactions and wear on coarse waste shredders

    Lasch, T., Khodier, K. (Co-editor), Feyerer, C. (Co-editor), Lehner, M. (Co-editor) & Sarc, R. (Co-editor), 27 Dec 2024, In: Waste Management and Research. ??? Stand: 10. Februar 2025, ??? Stand: 10. Februar 2025, 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Interplay of flow stratification, segregation channels, and crystal dynamics in a solidifying aqueous ammonium chloride solution

    Ludwig, A., Siyahatshayesteh, G., Stefan-Kharicha, M., Wu, M. & Kharicha, A., 27 Dec 2024, In: International journal of heat and mass transfer. 240.2025, 1 May, 8 p., 126638.

    Research output: Contribution to journal › Article › Research › peer-review

  40. E-pub ahead of print

    Stabilization of mechanical strength in a nanocrystalline CoCrNi concentrated alloy by nitrogen alloying

    Moravcik, I., Alfreider, M., Wurster, S., Schretter, L., Zadera, A., Pernica, V., Čamek, L., Eckert, J. & Hohenwarter, A., 27 Dec 2024, (E-pub ahead of print) In: Materials Science and Engineering: A. 924.2025, February, 14 p., 147757.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Influence of Different Measuring Backgrounds on the Classification of Multilayer Polyolefin Films Using a Near-Infrared Handheld Spectrometer

    Stipanovic, H., Arth, P., Koinig, G., Kuhn, N. E., Lederer, J., Blasenbauer, D., Lipp, A.-M. & Tischberger-Aldrian, A., 26 Dec 2024, In: Applied spectroscopy. ??? Stand: 4. Februar 2025, ??? Stand: 4. Februar 2025, 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    A Systematic Literary Review on Community Resilience Indicators: Adaptation and Application of the BRIC Method for Measuring Disasters Resilience

    Milenković, D., Cvetković, V. & Renner, R., 25 Dec 2024, In: International journal of disaster risk management. 6.2024, 2, p. 79-103 25 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Industrial Disasters and Hazards: From Causes to Consequences: A Holistic Approach to Resilience

    Cvetković, V., Renner, R. & Jakovljević, V., 25 Dec 2024, In: International journal of disaster risk management. 6.2024, 2, p. 149-168 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Optimising Disaster Resilience Through Advanced Risk Management and Financial Analysis of Critical Infrastructure in the Serbian Defence Industry

    Vidović, N., Beriša, H. & Cvetković, V., 25 Dec 2024, In: International journal of disaster risk management. 6.2024, 2, p. 183-199 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. E-pub ahead of print

    Unusual hardness and string-like structures relaxation of metallic glass investigated by in-situ synchrotron radiation

    Zhang, N. Z., Spieckermann, F., Yuan, X. D., Şopu, D., Jin, X., Sun, K., Mendez, A., Yu, P., Wang, G. & Eckert, J., 25 Dec 2024, (E-pub ahead of print) In: Journal of alloys and compounds. 1010.2025, 5 January, 7 p., 178287.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    3D-Printed Acrylated Soybean Oil Scaffolds with Vitrimeric Properties Reinforced by Tellurium-Doped Bioactive Glass

    Bergoglio, M., Kriehuber, M., Sölle, B., Rossegger, E., Schlögl, S., Najmi, Z., Cochis, A., Ferla, F., Miola, M., Vernè, E. & Sangermano, M., 23 Dec 2024, In: Polymers. 16.2024, 24, 19 p., 3614.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Influence of increasing chromium content on additively manufactured tool steels: Microstructural and mechanical evolution before and after heat treatment

    Ofner, N., Bodner, S., Kunnas, P., Asci, A., Kutlesa, K., Stark, A., Höbenreich, P., Aumayr, C., Wu, L., Turk, C., Keckes, J. & Meindlhumer, M., 21 Dec 2024, In: Journal of Materials Research and Technology. 34.2025, January-February, p. 2715-2727 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    A systematic model- and experimental approach to hydro-mechanical and thermo-mechanical fracture processes in crystalline rocks

    Kolditz, O., McDermott, C., Yoon, J. S., Mollaali, M., Wang, W., Hu, M., Sasaki, T., Rutqvist, J., Birkholzer, J., Park, J.-W., Park, C.-H., Liu, H., Pan, P., Nagel, T., Nguyen, S., Kwon, S., Lee, C., Kim, K.-I., Alexander, B. & Hadgu, T. & 5 others, Wang, Y., Zhuang, L., Yoshioka, K., Cunha, G. B. & Fraser-Harris, A., 20 Dec 2024, In: Geomechanics for energy and the environment. 41.2025, March, 25 p., 100616.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Assessing the hydrogen embrittlement susceptibility of an existing L360NB natural gas pipeline steel for 100 % hydrogen transport

    Ahmed Hamed Mahmoud Eid Gouda, A. H. M. E. G., Posch-Peperkorn, C., Maierhofer, J., Beschliesser, M., Fink, S. & Mori, G. K., 19 Dec 2024, In: Corrosion science. 244.2025, March, 11 p., 112648.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Integrated Rock Mass Characterization of the Lower Continental Crust Along the ICDP-DIVE 5071_1_B Borehole in the Ivrea-Verbano Zone

    Li, J., Caspari, E., Greenwood, A., Pierdominici, S., Lemke, K., Venier, M., Kück, J., Baron, L., Pistone, M., Petri, B., Ziberna, L. & Hetényi, G., 18 Dec 2024, In: Geochemistry, geophysics, geosystems. 25.2024, 12, 26 p., e2024GC011707.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Microstructural insights into the coarse‑grained heat‑affected zone of a high‑strength all‑weld metal: Development of a continuous cooling transformation diagram

    Schrittwieser, D., Marin Morales, D., Pahr, H., Lumper-Wimler, L., Glushko, O. & Schnitzer, R., 18 Dec 2024, In: Welding in the world. ??? Stand: 4. Februar 2025, ??? Stand: 4. Februar 2025, 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Strain rate-dependent failure modes of material extrusion-based additively manufactured PETG: A study on crack deflection and penetration

    Waly, C., Schulnig, S. & Arbeiter, F., 18 Dec 2024, In: Theoretical and Applied Fracture Mechanics. 136.2025, April, 15 p., 104834.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...670 Next
View graph of relations