Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

3701 - 3750 out of 4,193Page size: 50

Research output

  1. 2007
  2. Published

    Selected polymers containing aromatic ester units: synthesis, photoreactions and refractive index modulation

    Höfler, T., Kern, W. & Jakopic, G., 2007, In: Macromolecular chemistry and physics. 208, p. 1190-1201

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Selective immobilization of gold nanoparticles on the surface of a photoreactive polymer

    Kern, W., Weinberger, M. & Rentenberger, S., 2007, In: Monatshefte für Chemie = Chemical monthly. 138, p. 309-314

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Self assembled monolayers on gold: A study of 11-mercaptoundecanoic acid (11-MUA) on gold

    Stettner, J., Frank, P., Winkler, A., Grießer, T., Track, A., Trimmel, G. & Kern, W., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  5. Published

    Simulation der Spritzgießprozesses von Mikrobauteilen

    Cramer, A., Michaeli, W., Friesenbichler, W. & Duretek, I., 2007, In: Zeitschrift Kunststofftechnik : Journal of plastics technology. 3, p. 1-26

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Simulation des Aufheizvorgangs beim Thermoformen

    Fertschej, A., Langecker, G. & Kertz, J., 2007, In: Kunststoffe. 97, p. 62-65

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Simulation fo the heating step within the thermoforming process using the finite difference method

    Fertschej, A. & Langecker, G., 2007, PPS-23 Program and Book of Abstracts. p. 113-113

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Simulation of the Heating Cycle during Thermoforming

    Fertschej, A., Langecker, G. & Kertz, J., 2007, In: Kunststoffe. 97, p. 37-39

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Size-Controlled Synthesis of ZnS-Nanoparticles in an Organic Solvent and their Application in Photovoltaic Devices

    Rath, T., Maier, E., Grießer, T., Saf, R., Meissner, D., Trimmel, G. & Stelzer, F., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. Published

    Slow crack growth in PE-HD under static and cyclic loads

    Pinter, G. G., 2007

    Research output: Thesis › Habilitation thesis › peer-review

  11. Published

    Small strain test system for optical strain measurement systems

    Steinberger, R., Jerabek, M., Major, Z. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 393-394

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Solarthermische Kunststoffkollektoren mit integriertem Überhitzungsschutz

    Hausner, R., Wallner, G. & Resch, K., 2007, 17. Symposium Thermische Solarenergie. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Solarthermische Kunststoffkollektoren mit integriertem Überhitzungsschutz

    Hausner, R., Wallner, G. & Resch, K., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    Structural Basis for Intumescence-Part II: Synthesis and Characterization of Intumescent Polymers Containing Spirophosphorus Moiety in the Backbone

    Fink, J., 2007, In: Polymer plastics technology and engineering (Polymer-plastics technology and engineering). p. 919-925

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Surface modification of polyethylene by photosulfonation

    Temmel, S. & Kern, W., 2007, Polymer Surface Modification: Relevance to Adhesion. Vol. 4. p. 154-167

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  16. Published

    Systematic investigations of fatigue crack growth behavior of a PE-HD pipe grade in through-thickness direction

    Balika, W., Pinter, G. & Lang, R., 2007, In: Journal of Applied Polymer Science. p. 1745-1758

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Temperierte Zugversuche zur Bestimmung mechanischer Kennwerte und des Erscheinungsbildes von Lackfilmen und bandbeschichteten Blechen

    Wohlscheiber, F., 2007

    Research output: Thesis › Diploma Thesis

  18. Published

    Tensile tests for liner resin HPM053 with and without pigment

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Tensile tests for UP-Resin distitron 412 V2 with various filler types (dry and wet)

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Testing of rail parts according ST 120/20a - AREA in case of heavy load application

    Major, Z. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    The influence of fiber-orientation and stress ratio on the fatigue behavior of short-glasfiber-reinforced polymers

    Guster, C., Pinter, G., Eichlseder, W. & Lang, R. W., 2007, Society of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007, Conference Proceedings. p. 284-288 5 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Thermotropic Resin Systems: Relationships Between Formulation Parameters, Material Structure and Optical Properties

    Resch, K. & Wallner, G., 2007, Solar Energy and Human Settlement. p. 541-545

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Thin Layers of Photosensitive Silane Molecules for Photochemical Patterning

    Lex, A., Pacher, P., Schennach, R., Shen, Q., Hlawacek, G., Track, A. M., Koller, G., Ramsey, M. G., Teichert, C., Werzer, O., Resel, R., Zojer, E., Kern, W. & Trimmel, G., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Thin Layers of Photosensitive Silane Molecules for Photochemical Patterning

    Lex, A., Pacher, P., Schennach, R., Shen, Q., Hlawacek, G., Track, A. M., Koller, G., Ramsey, M. G., Teichert, C., Werzer, O., Resel, R., Zojer, E., Kern, W. & Trimmel, G., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  25. Published

    Topografiemessung einer ungetemperten und einer getemperten mit Kunststoff beschichteten Aluminiumfolie

    Berger, G. R. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Untersuchungen zu Schwindung und Verzug von Schachtelformteilen mit verschiedenen Wanddickenkombinationen

    Zaucher, P., 2007

    Research output: Thesis › Diploma Thesis

  27. Published

    UV assisted surface modification of polybutadiene with phosphorus containing groups

    Buchgraber, C., Svagera, R., Ebel, M. F., Schröttner, H. & Kern, W., 2007, In: Macromolecular chemistry and physics. 208, p. 1159-1167

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    UV-reactive Monolayers of Aryl Esters on Oxidic Surfaces: Patterning and Chemical Surface Modification via Photo-Fries Rearrangment.

    Höfler, T., Basnar, B., Cirac, J., Grießer, T., Hlawacek, G., Hoffmann, H., Shen, Q., Kovac, J., Ramsey, M., Satka, A., Teichert, C., Temmel, S., Track, A., Trimmel, G., Zojer, E. & Kern, W., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    UV reactive polymers for refractive index modulation based on the photo-Fries rearrangement

    Höfler, T., Grießer, T., Gstrein, X., Trimmel, G., Jakopic, G. & Kern, W., 2007, In: Polymer. 48, p. 1930-1939

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    UV reactive polymers with tunable refractive index

    Daschiel, U., Hoefler, T., Jakopic, G. & Kern, W., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Verfahren zur Ermittlung von Materialkennwerten polymerer Schäume für die Crashsimulation

    Reiter, M. G., 2007, 110 p.

    Research output: Thesis › Diploma Thesis

  32. Published

    Verfahren zur verbesserten Charakterisierung von porösen Materialien in der Fahrzeugakustik

    Ickinger, S., 2007, 70 p.

    Research output: Thesis › Diploma Thesis

  33. Published

    Volume strain measurements of particle-filled polypropylene compounds

    Jerabek, M. & Major, Z., 2007, Eurofillers. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Zugprüfungen an glasfaserverstärkten Composites

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    Zug- und Druckeigenschaften des Laminatwerkstoffes L06 (Matrix: Epolack) für unterschiedliche Aushärtungsgrade

    Pilz, G., Karpf, R. & Thiel, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  36. 2006
  37. Published

    Characterisation of the tensile fatigue behaviour of RTM-laminates by isocyclic stress-strain-diagrams

    Pinter, G., Ladstätter, E., Billinger, W. & Lang, R. W., Oct 2006, In: International Journal of Fatigue. 28, 10 SPEC. ISS., p. 1277-1283 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Verfahren zur Modifizierung von Kunststoff-Oberflächen

    Kern, W. (Inventor) & Buchgraber, C. (Inventor), 20 Sept 2006

    Research output: Patent

  39. Published

    Photoreaktive Oberflächenbeschichtungen

    Kern, W. (Inventor), Trimmel, G. (Inventor), Lex, A. (Inventor) & Stelzer, F. (Inventor), 9 May 2006

    Research output: Patent

  40. Published

    19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung

    Friesenbichler, W. (Editor) & Laske, S. (Editor), 2006, Eigenverlag.

    Research output: Book/Report › Book › Research

  41. Published

    Abrasive/corresive Wear on Plastic Mould Steels, measured under practical conditions

    Friesenbichler, W., Langecker, G. & Caliskanoglu, D., 2006, Tooling Materials and their applications from research to market. p. 267-290

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Accelerated ageing experiments with crosslinked and conventional ultra-high molecular weight polyethylene (UHMW-PE) stabilised with alpha-tocopherol for total joint arthroplasty

    Lederer, K., 2006, In: Journal of materials science / Materials in medicine. 17, p. 1333-1340

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Accelerated quality assurance tests for PE pipe grades

    Pinter, G., Haager, M. J. & Lang, R., 2006, ANTEC 2006. p. 2480-2484

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    A Column By-Pass System and Its Application in High-Temperature Size-Exclusion Chromatography

    Aust, N., O'Donohue, S., Yakhoul, A. J. & Zash, N., 2006, In: Macromolecular materials and engineering. 291, p. 387-387

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    A Desgin Support System for Plastic Injection Molds: 22nd Annual Meeting of the Polymer Processing Society, Conference Proceedings

    Langecker, G., Lucyshyn, T. & Fischer, K., 2006

    Research output: Non-textual form › Web publication/site › Research

  46. Published

    A Design Support System for Plastic Injection Molds

    Fischer, K., Lucyshyn, T. & Langecker, G., 2006, Program and Abstracts of the 22nd Annual Meeting of the Polymer Processing Society, Yamagata, Japan 2006. p. 216-216

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Advanced Finite Element Analysis for High Power Wind Energy Systems

    Wörndle, R. & Karall, T., 2006, 2006 8th International Conference on Actual Problems of Electronic Instrument Engineering Proceedings Vol. 1 (APEIE-2006 in 7 volumes ; Novosibirsk, September 26 - 28, 2006). State Technical University, p. 234-239

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Aging and aging mechanism of functional polymers for optical applications - WP Report "Untersuchungen an funktionalen Polyolefinen – Teil3 (Diss Oreski)"

    Wallner, G., Oreski, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Aging and aging mechanism of functional polymers for optical applications - WP Report "Untersuchungen an Solarabsorbermaterialien (Diss Kahlen)"

    Wallner, G., Kahlen, S. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Aging behavior of polymeric materials for solar-thermal applications – Effect on ultimate mechanical properties

    Kahlen, S., Wallner, G., Meir, M. G. & Rekstad, J., 2006, EuroSun 2006. ISES, p. 7-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Alternative Polyethylentypen für Gleitflächen von Endoprothesen

    Weitlaner, A. B., 2006, 61 p.

    Research output: Thesis › Diploma Thesis

  52. Published

    Analytische und technologische Charakterisierung von polymeren Solarabsorbermaterialien

    Fischer, J., 2006, 131 p.

    Research output: Thesis › Diploma Thesis

Previous 1...71 72 73 74 75 76 77 78 ...84 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301