Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

351 - 400 out of 4,192Page size: 50

Research output

  1. 2023
  2. Published

    Numerical Analysis of Thermal Frontal Polymerization in Polymer Composites: The Role of Fe3O4 Nanoparticle Fillers

    Lang, M. C., Schmidleitner, C., Fuchs, P. F. & Rossegger, E., 2023.

    Research output: Contribution to conference › Poster › Research

  3. Published

    Photopolymere für die Additive Fertigung von Formeinsätzen für Spritzgießwerkzeuge

    Sommer, K., 2023

    Research output: Thesis › Doctoral Thesis

  4. Published

    Process optimization and simulation of film insert molding for electronic applications

    Hubmann, M., 2023

    Research output: Thesis › Doctoral Thesis

  5. Published

    Recycling of multilayer packaging film

    Feuchter, M., 2023, Challenges, trends and solutions in developing and processing of recycled polymer materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Recycling of multilayer packaging film

    Feuchter, M., Plevová, K., Medvid, V. & Brenn, G., 2023, 31st Leoben-Conference on Polymer Engineering and Science: Circular Thinking in Polymer Technology. p. 37-39

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Schallemissionsanalyse während der zyklischen Belastung von kontinuierlich faserverstärkten Kunststoffen

    Gfrerrer, M., Wiener, J., Brunner, A. J. & Pinter, G., 2023, SCHALL 23: Entwicklung und Anwendung der Schallemissionsanalyse und Zustandsüberwachung mit geführten Wellen.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Screening Life Cycle Assessment comparing One-step and Two-step Injection Molding Compounding using Conservative and Optimistic Scenarios

    Kirschnick, U., Shahroodi, Z., Krempl, N. & Schledjewski, R., 2023, In: WSEAS transactions on environment and development. 19.2023, 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Screening Method Development for Die Drool in Extrusion Blow Moulding for PCR PEHD

    Jochum, P. A., 2023

    Research output: Thesis › Master's Thesis

  10. Published

    Sequentiaql orthogonality by [2+2] cycloadditions in dual-cure photopolymers

    Müller, S. M., Nelson, B., Naderer, C., Sivun, D., Jacak, J., Schlögl, S. & Griesser, T., 2023.

    Research output: Contribution to conference › Poster › Research

  11. Published

    STRESS- AND STRAIN-BASED FATIGUE LIFE CALCULATION FOR SHORT FIBER REINFORCED POLYMERS BY USE OF FE-SAFE®

    Kaylani, D., Primetzhofer, A., Stadler, G., Zacharias, T., Toenz, T. & Pinter, G., 2023.

    Research output: Contribution to conference › Paper › peer-review

  12. Published

    Surface modification of inorganic fillers and their use in advanced thermoplastic polyurethane composites

    Lenger, A., 2023

    Research output: Thesis › Master's Thesis

  13. Published

    Sustainable bio-based UV-cured epoxy vitrimer from castor oil

    Bergoglio, M., Reisinger, D., Schlögl, S., Griesser, T. & Sangermano, M., 2023.

    Research output: Contribution to conference › Poster › Research

  14. Published

    Synthesis and Characterization of a Bio-Based Transesterification Catalyst for Green Photopolymers

    Sölle, B., Schlögl, S. & Rossegger, E., 2023.

    Research output: Contribution to conference › Poster › Research

  15. Published

    Synthesis and characterization of magnetic pholopolymers for nanoimprint lithography

    Schmidleitner, C., Schlögl, S., Trimmel, G. & Rossegger, E., 2023.

    Research output: Contribution to conference › Poster › Research

  16. Published

    Synthesis and characterization of magnetic photopolymers for nanoimprint lithography

    Schmidleitner, C., Schlögl, S., Trimmel, G. & Rossegger, E., 2023.

    Research output: Contribution to conference › Poster › Research

  17. Published

    Thermomechanical and Electrical Material Characterization for a DLP Printing Process Simulation of Electrically Conductive Parts

    Thalhamer, A., Rossegger, E., Hasil, S., Hrbinic, K., Feigl, V., Pfost, M. & Fuchs, P., 2023, 2023 24th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2023. Institute of Electrical and Electronics Engineers, (2023 24th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2023).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Thermomechanical and Electrical Material Characterization for a DLP Printing Process Simulation of Electrically Conductive Parts

    Thalhamer, A., Rossegger, E., Hasil, S., Hrbinič, K., Feigl, V., Pfost, M. & Fuchs, P. F., 2023.

    Research output: Contribution to conference › Poster › Research

  19. Published

    Untersuchung des Einflusses der chemischen Zusammensetzung von Polymer-basierten Beschichtungen auf Oberflächen- und Materialparameter und deren taktile Wirkung

    Grießer, M., 2023

    Research output: Thesis › Master's Thesis

  20. Published

    UV-stabilization of linseed oil-based epoxy resin

    Schwaiger, M., Schedler, M. & Resch-Fauster, K., 2023, Polymer Meeting 15: Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Validation Of Alternative Binders for Pellet Extrusion 3D Printing Of 316L Steels

    de la Camacha, A. G., Tabares, E., Jiménez-Morales, A., Schsuchnigg, S., Kukla, C., Cano, S. & Gordo, E., 2023.

    Research output: Contribution to conference › Paper › peer-review

  22. 2022
  23. Published

    DENSITY BASED CLUSTERING AS A TOOL TO ANALYZE ACOUSTIC EMISSION SIGNALS

    Wiener, J., Gfrerrer, M., Schneider, C. & Pinter, G. G., 28 Dec 2022, Proceedings of the 20th European Conference on Composite Materials: Composites meet sustainability. Vol. 3. p. 883-890 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Single-Step Kinetic Predictions Based on a Constructed Isoconversional State Diagram

    Tao, Q., Krivec, T. & Kern, W., 22 Dec 2022, In: Macromolecular Theory and Simulations. 33.2024, 3, 12 p., 2300066.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Simplified Damage Assessment Tool for Rails and Crossings Based on Standard Wear and RCF Models

    Schnalzger, G., Daves, W., Maierhofer, J., Ossberger, U., Ossberger, H., Bucher, C. & Pletz, M., 16 Dec 2022, In: Metals. 12.2022, 12, 20 p., 2169.

    Research output: Contribution to journal › Article › Research › peer-review

  26. E-pub ahead of print

    Vat photopolymerization 3D printing with light-responsive thiol-norbornene photopolymers

    Rossegger, E., Li, Y., Frommwald, H. & Schlögl, S., 9 Dec 2022, (E-pub ahead of print) In: Monatshefte fur Chemie. 154.2023, 5, p. 473-480 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Sustainable Tunnelling – An infrastructure operator’s, planner’s, contractor’s and scientist’s perspective.

    Heissenberger, R., Grunicke, U., Raschendofer, J. & Holzer, C., 8 Dec 2022, In: Geomechanics and tunnelling. 15.2022, 6, p. 811-820 9 p.

    Research output: Contribution to journal › Article › Transfer › peer-review

  28. Published

    Vat Photopolymerization 3D-Printing of Dynamic Thiol-Acrylate Photopolymers Using Bio-Derived Building Blocks

    Shaukat, U., Sölle, B., Rossegger, E., Rana, S. & Schlögl, S., 8 Dec 2022, In: Polymers. 14.2022, 24, 14 p., 5377.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Analysis of Permeation of Low-Molecular-Weight Hydrocarbons through Polyolefins for Testing of a New Developed Method

    Berger, K. & Rieß, G., Dec 2022, In: Macromolecular chemistry and physics. 223.2022, 24, 9 p., 2200208.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Metal Injection Molding of Low Alloy Steel by Using a Palm Stearin/HDPE Binder System

    Momeni, V., Dec 2022, Key engineering materials. (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  31. Published

    The effect of carbon fiber content on physico-mechanical properties of recycled poly(ethylene terephthalate) composites additively manufactured with fused filament fabrication

    Katalagarianakis, A., Van de Voorde, B., Pien, N., Polyzos, E., Duretek, I., Holzer, C., Cardon, L., Bernaerts, K. V., Van Hemelrijck, D., Van Vlierberghe, S. & Pyl, L., Dec 2022, In: Additive Manufacturing. 60.2022, Part A, December, 14 p., 103246.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Towards virtually optimized curing cycles for polymeric encapsulations in microelectronics

    Schipfer, C., Gschwandl, M., Fuchs, P., Antretter, T., Feuchter, M., Morak, M., Tao, Q. & Schingale, A., Dec 2022, In: Microelectronics Reliability. 139.2022, December, 9 p., 114799.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Determination of thermal conductivity of six thermoplastic compounds

    Duretek, I., 28 Nov 2022, 11 p.

    Research output: Book/Report › Commissioned report › Research

  34. Published

    Determination of pvT-behavior of two various polyolefin-compounds

    Duretek, I., 25 Nov 2022, 6 p.

    Research output: Book/Report › Commissioned report › Research

  35. E-pub ahead of print

    Blocked Phosphates as Photolatent Catalysts for Dynamic Photopolymer Networks

    Dertnig, C. A., Guedes de la Cruz, G. D. C., Neshchadin, D., Schlögl, S. & Grießer, T., 24 Nov 2022, (E-pub ahead of print) In: Angewandte Chemie - International Edition. 62.2022, 10, 5 p., e202215525.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    COMPOSITES SUSTAINABILITY – MANUFACTURING, REPAIR, AND RECYCLING ARE CHALLENGING

    Schledjewski, R., 22 Nov 2022, Proceedings SE Conference 22 Hamburg.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Process Optimization of Injection Overmolding Structural Electronics with Regard to Film Distortion

    Hubmann, M., Madadnia, B., Groten, J., Pletz, M., Vanfleteren, J., Stadlober, B., Bossuyt, F., Kaur, J. & Lucyshyn, T., 22 Nov 2022, In: Polymers. 14.2022, 23, 20 p., 5060.

    Research output: Contribution to journal › Article › Research › peer-review

  38. E-pub ahead of print

    Ingested microplastics: Do humans eat one credit card per week?

    Pletz, M., 19 Nov 2022, (E-pub ahead of print) In: Journal of hazardous materials letters. 3.2022, November, 5 p., 100071.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Dynamic Behavior of Thermally Affected Injection-Molded High-Density Polyethylene Parts Modified by Accelerated Electrons

    Mizera, A., Krstulovic-Opara, L., Krempl, N., Karhankova , M., Manas, M., Sanek , L., Stoklasek, P. & Grebo, A., 16 Nov 2022, In: Polymers 2022 / Advances in the Mechanical Behavior of Polymeric Materials). 14:2022, 22, 15 p., 4970.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Influence of Binder Composition and Material Extrusion (MEX) Parameters on the 3D Printing of Highly Filled Copper Feedstocks

    Sadaf, M., Cano Cano, S., Gonzalez-Gutierrez, J., Bragaglia, M., Schuschnigg, S., Kukla, C., Holzer, C., Vály , L., Kitzmantel, M. & Nanni, F., 16 Nov 2022, In: Polymers / Molecular Diversity Preservation International. 14.2022, 22, 23 p., 4962.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Self-healable fiber-reinforced vitrimer composites: overview and future prospects

    Sharma, H., Rana, S., Singh, P., Hayashi, M., Binder, W. H., Rossegger, E., Kumar, A. & Schlögl, S., 14 Nov 2022, In: RSC Advances. 12.2022, 50, p. 32569-32582 14 p.

    Research output: Contribution to journal › Review article › peer-review

  42. Published

    A porous capillary tube approach for textile saturation

    Neunkirchen, S., Blößl, Y. & Schledjewski, R., 10 Nov 2022, In: Composites science and technology. 230.2022, 10 November, 9 p., 109450.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Bio-based FRP composites and their circularity potential: Options for environmental assessment

    Kirschnick, U., Kern, H. & Schledjewski, R., 10 Nov 2022.

    Research output: Contribution to conference › Presentation › Research › peer-review

  44. Published

    Bio-based FRP composites and their circularity potential: Options for environmental assessment

    Kirschnick, U., Kern, H. & Schledjewski, R., 9 Nov 2022.

    Research output: Contribution to conference › Paper › peer-review

  45. Published

    Pack2theLoop – Closing the circle of polyolefin packaging

    Krempl, N., Pinter, E., Jahn, E. & Bichler, L., 9 Nov 2022.

    Research output: Contribution to conference › Poster › Research

  46. Published

    Closed-loop recycling of packaging waste at the food manufacturer Freiberg

    Plevová, K., Feuchter, M., Wild, N., Wellacher, M., Jamnik, A. & Pichorner, H., 30 Oct 2022.

    Research output: Contribution to conference › Poster › Research

  47. Published

    A Bird’s-Eye View on Polymer-Based Hydrogen Carriers for Mobile Applications

    Sharifian, M., Kern, W. & Riess, G., 25 Oct 2022, In: Polymers. 14.2022, 21, 26 p., 4512.

    Research output: Contribution to journal › Review article › peer-review

  48. Published

    Inline tape width control for thermoplastic automated tape layup

    Yadav, N. & Schledjewski, R., 21 Oct 2022, In: Composites Part A: Applied Science and Manufacturing. 163.2022, December, 9 p., 107267.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Circularity and sustainability of biobased polymer/natural fiber reinforced composite

    Ravindran, B. & Schledjewski, R., 20 Oct 2022.

    Research output: Contribution to conference › Presentation › Research › peer-review

  50. Published

    In-situ alignment of 3D printed anisotropic hard magnets

    Suppan, M., Huber, C., Mathauer, K., Abert, C., Bruckner, F., Gonzalez-Gutierrez, J., Schuschnigg, S., Groenefeld, M., Teliban, I., Kobe, S., Saje, B. & Suess, D., 20 Oct 2022, In: Scientific reports (London : Nature Publishing Group). 12.2022, October, 6 p., 17590.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Influence of Viscose Fibre Geometry on the Structure–Property Relationships of High-Density Polyethylene Composites

    Slapnik, J., Kraft, G., Wilhelm, T., Hribernik, M., Švab, I., Lucyshyn, T. & Pinter, G. G., 18 Oct 2022, In: Polymers. 14.2022, 20, 15 p., 4389.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Peroxide-Based Crosslinking of Solid Silicone Rubber, Part I: Insights into the Influence of Dicumylperoxide Concentration on the Curing Kinetics and Thermodynamics Determined by a Rheological Approach

    Azevedo, M., Monks, A. M., Kerschbaumer, R. C., Schlögl, S. & Holzer, C., 18 Oct 2022, In: Polymers. 14.2022, 20, 22 p., 4404.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...4 5 6 7 8 9 10 11 ...84 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301