Department Materials Science

Organisational unit: Departments and Institutes

301 - 350 out of 5,453Page size: 50

Research output

  1. 2023
  2. Published

    Influence of the aspect ratio of the micro-cantilever on the determined Young’s modulus using the Euler-Bernoulli equation

    Konstantiniuk, F., Krobath, M., Ecker, W., Czettl, C., Schalk, N. & Tkadletz, M., Jun 2023, In: Materials Today Communications. 35.2023, June, 9 p., 106225.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    In Situ Observations of the Microstructural Evolution during Heat Treatment of a PH 13-8 Mo Maraging Steel

    Rosenauer, A., Brandl, D., Ressel, G., Lukas, S., Gruber, C., Stockinger, M. & Schnitzer, R., Jun 2023, In: Advanced engineering materials. 25.2023, 12, 12 p., 2300410.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Severe plastic deformation close to the melting point enables Mg-Fe nanocomposites with exceptional strength

    Roostaei, M., Uggowitzer, P., Pippan, R. & Renk, O., Jun 2023, In: Scripta materialia. 230.2023, June, 5 p., 115428.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Synthesis and mechanical properties of co-deposited W nanoparticle and ZrCuAg metallic glass thin film composites

    Huszar, E., Sharma, A., Székely, L., Raghavan, R., Putz, B., Edwards, T. E. J., Spolenak, R., Michler, J. & Pethö, L., 31 May 2023, In: Thin solid films. 773, 139822.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Scaling up the cold sintering process of ceramics

    Jabr, A., Jones, H. N., Argüelles, A. P., Trolier-McKinstry, S., Randall, C. A. & Bermejo Moratinos, R., 30 May 2023, In: Journal of the European Ceramic Society. 43, 12, p. 5319-5329 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    Phase equilibria in the Ti-Al-W system between 800 and 1300 ◦C

    Distl, B., Rashkova, B. & Stein, F., 23 May 2023, (E-pub ahead of print) In: Materials Today Communications. 35.2023, June, 15 p., 106291.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    High-Throughput Micromechanical Testing Enabled by Optimized Direct Laser Writing

    Jelinek, A., Žák, S., Alfreider, M. & Kiener, D., 22 May 2023, In: Advanced engineering materials. 2023, 25, 10 p., 2200288.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Impact of d‑states on transition metal impurity diffusion in TiN

    Nayak, G. K., Holec, D. & Zelený, M., 22 May 2023, In: Scientific reports (London : Nature Publishing Group). 2023, 13, 11 p., 8244.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Delignification and Densification as a Route to Enable the Use of Wheat Straw for Structural Materials

    Neudecker, F., Jakob, M., Bodner, S., Keckes, J., Buerstmayr, H. & Gindl-Altmutter, W., 4 May 2023, In: ACS Sustainable Chemistry and Engineering. 11.2023, 19, p. 7596-7604 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Feasibility study on electrically conductive joining of MoSi2 electrodes for spark plugs

    Gruber, M., Tilz, A., Harrer, W. S., Papšík, R., Fimml, W. & Engelmayer, M., 1 May 2023, In: International journal of applied ceramic technology. 2023, p. 3257-3266 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Models of configurationally-complex alloys made simple

    Gehringer, D., Friák, M. & Holec, D., May 2023, In: Computer physics communications. 286.2023, May, 11 p., 108664.

    Research output: Contribution to journal › Article › Research › peer-review

  13. E-pub ahead of print

    Lower hardness than strength: The auxetic composite microstructure of limpet tooth

    Wurmshuber, M., Wilmers, J., Kim, J., Oh, S. H., Bargmann, S. & Kiener, D., 29 Apr 2023, (E-pub ahead of print) In: Acta biomaterialia. 2023, 166, p. 447-453 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Effect of pulse-current-based protocols on the lithium dendrite formation and evolution in all-solid-state batteries

    Reisecker, V., Flatscher, F., Porz, L., Fincher, C., Todt, J., Hanghofer, I., Hennige, V., Linares-Moreau, M., Falcaro, P., Ganschow, S., Wenner, S., Chiang, Y. M., Keckes, J., Fleig, J. & Rettenwander, D., 27 Apr 2023, In: Nature Communications. 14.2023, 12 p., 2432.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Local gradients of microstructure and residual stresses in Si device sidewalls separated by laser dicing

    Ziegelwanger, T., Meindlhumer, M., Todt, J., Reisinger, M., Matoy, K. & Keckes, J., 24 Apr 2023.

    Research output: Contribution to conference › Poster › Research

  16. Published

    Fine-grained aluminium crossover alloy for high-temperature sheet forming

    Samberger, S., Weißensteiner, I., Stemper, L., Kainz, C., Uggowitzer, P. & Pogatscher, S., 19 Apr 2023, In: Acta materialia. 253.2023, 1 July, 14 p., 118952.

    Research output: Contribution to journal › Article › Research › peer-review

  17. E-pub ahead of print

    On correlations between local chemistry, distortions and kinetics in high entropy nitrides: An ab initio study

    Nayak, G. K., Kretschmer, A., Mayrhofer, P. H. & Holec, D., 19 Apr 2023, (E-pub ahead of print) In: Acta materialia. 255.2023, 15 August, 9 p., 118951.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Strengthening effect of NiAl and Ni3Ti precipitates in Co-free maraging steels

    Zeisl, S., Van Steenberge, N. & Schnitzer, R., 19 Apr 2023, In: Journal of materials science. 58.2023, April, p. 7149–7160 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Glide and mixed climb dislocation velocity in γ-TiAl investigated by in-situ transmission electron microscopy

    Galy, B., Musi, M., Hantcherli, M., Molénat, G., Couret, A., Spörk-Erdely, P., Clemens, H. & Monchoux, J.-P., 15 Apr 2023, In: Scripta materialia. 228.2023, 15 April, 8 p., 115333.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Topography of high-speed steel substrates sputter cleaned by an Ar/Ti cathodic arc plasma

    Kampichler, J., Razumovskiy, V. I., Klünsner, T., Kholtobina, A., Brandstetter, F., Nahif, F. & Mitterer, C., 15 Apr 2023, In: Surface & coatings technology. 458.2023, 15 April, 10 p., 129344.

    Research output: Contribution to journal › Article › Research › peer-review

  21. E-pub ahead of print

    Interstitial segregation has the potential to mitigate liquid metal embrittlement in iron

    Ahmadian, A., Scheiber, D., Zhou, X., Gault, B., Romaner, L., Kamachali, R. D., Ecker, W., Dehm, G. & Liebscher, C., 8 Apr 2023, (E-pub ahead of print) In: Advanced materials. 35.2023, 28, 11 p., 2211796.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Phase stability of TiAl-based BCC high entropy alloys

    Hatzenbichler, L., Zeisl, S., Clemens, H. & Holec, D., 7 Apr 2023, In: Intermetallics. 158.2023, July, 9 p., 107893.

    Research output: Contribution to journal › Article › Research › peer-review

  23. E-pub ahead of print

    Synthesis of crystalline silver niobate thin films opening pathways for future process development

    Kölbl, L., Mitterer, C. & Franz, R., 7 Apr 2023, (E-pub ahead of print) In: Vacuum. 213.2023, July, 6 p., 112077.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Microstructure formation and mechanical performance of micro-nanoscale ceramic reinforced aluminum matrix composites manufactured by laser powder bed fusion

    Xi, L., Feng, L., Gu, D., Prashanth, K. G., Kaban, I., Wang, R., Xiong, K., Sarac, B. & Eckert, J., 5 Apr 2023, In: Journal of alloys and compounds. 939.2023, 5 April, 12 p., 168803.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Enhancement of hydrogen storage properties from amorphous Mg85Ni5Y10 alloy

    Zhou, H., Ding, Z., Chen, Y. A., Lan, Z., Guo, S., Spieckermann, F., Zadorozhnyy, V., Tan, J., Pan, F. & Eckert, J., 1 Apr 2023, In: Journal of non-crystalline solids. 605.2023, 1 April, 9 p., 122167.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Decomposition of CrN induced by laser-assisted atom probe tomography

    Waldl, H., Hans, M., Schiester, M., Primetzhofer, D., Burtscher, M., Schalk, N. & Tkadletz, M., Apr 2023, In: Ultramicroscopy. 246.2023, April, 8 p., 113673.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Efficient preparation of microtip arrays for atom probe tomography using fs-laser processing

    Tkadletz, M., Waldl, H., Schiester, M., Lechner, A., Schusser, G., Krause, M. & Schalk, N., Apr 2023, In: Ultramicroscopy. 246.2023, April, 5 p., 113672.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Strength determination for rough substrate-coating interfaces with three-dimensional defect structure

    Klünsner, T., Krobath, M., Konetschnik, R., Tritremmel, C., Maier-Kiener, V., Samardzic, D., Ecker, W., Czettl, C., Mitterer, C. & Kiener, D., Apr 2023, In: International journal of refractory metals & hard materials. 2023, 112, 10 p., 106149.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    The B3B Strength test

    Staudacher, M., Lube, T. & Supancic, P. H., 30 Mar 2023.

    Research output: Contribution to conference › Poster › Research

  30. E-pub ahead of print

    Small-scale fracture mechanical investigations on grain boundary doped ultrafine-grained tungsten

    Wurmshuber, M., Alfreider, M., Wurster, S., Burtscher, M., Pippan, R. & Kiener, D., 28 Mar 2023, (E-pub ahead of print) In: Acta Materialia. 2023, 250, 12 p., 118878.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Bonding Performance of Surface-Treated Zirconia Cantilevered Resin-Bonded Fixed Dental Prostheses: In Vitro Evaluation and Finite Element Analysis

    Malgaj, T., Papšík, R., Abram, A., Kocjan, A. & Jevnikar, P., 27 Mar 2023, In: Materials. 16, 7, 15 p., 2646.

    Research output: Contribution to journal › Article › Research › peer-review

  32. E-pub ahead of print

    Phosphorus and transition metal co-segregation in ferritic iron grain boundaries and its effects on cohesion

    Mai, H. L., Cui, X.-Y., Scheiber, D., Romaner, L. & Ringer, S. P., 20 Mar 2023, (E-pub ahead of print) In: Acta materialia. 250.2023, 15 May, 17 p., 118850.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    A TEM study of a dislocations in the ßo phase of an intermetallic TNM-TiAl alloy

    Molénat, G., Monchoux, J.-P., Musi, M., Spörk-Erdely, P., Clemens, H. & Couret, A., 15 Mar 2023, In: Scripta materialia. 226.2023, 15 March, 6 p., 115247.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Link between cracking mechanisms of trilayer films on flexible substrates and electro-mechanical reliability under biaxial loading

    Altaf Husain, S., Kreiml, P., Renault, P.-O., Mitterer, C., Cordill, M. J. & Faurie, D., 14 Mar 2023, In: Journal of vacuum science & technology / A (JVST). 41.2023, 3, 8 p., 033403.

    Research output: Contribution to journal › Article › Research › peer-review

  35. E-pub ahead of print

    Fatigue crack growth behavior of a nanocrystalline low Young's modulus β-type Ti–Nb alloy

    Pillmeier, S., Pippan, R., Eckert, J. & Hohenwarter, A., 4 Mar 2023, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 871.2023, 26 April, 12 p., 144868.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Influence of focus offset on the microstructure of an intermetallic γ-TiAl based alloy produced by electron beam powder bed fusion

    Ghibaudo, C., Wartbichler, R., Marchese, G., Clemens, H., Ugues, D. & Biamino, S., 3 Mar 2023, In: Journal of manufacturing processes. 89.2023, 3 March, p. 132-141 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Deformation Induced Structure and Property Changes in a Nanostructured Multiphase CrMnFeCoNi High-Entropy Alloy

    Schuh, B., Issa, I., Müller, T., Kremmer, T., Gammer, C., Pippan, R. & Hohenwarter, A., 2 Mar 2023, In: Nanomaterials. 13.2023, 5, 12 p., 924.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Effect of boron doping on grain boundary cohesion in technically pure molybdenum investigated via meso-scale three-point-bending tests

    Jakob, S., Hohenwarter, A., Lorich, A., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., 2 Mar 2023, In: International journal of refractory metals & hard materials. 113.2023, June, 4 p., 106173.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Hybridizing Lithography-Based Ceramic Additive Manufacturing with Two-Photon-Polymerization

    Sänger, J. C., Schwentenwein, M., Bermejo, R. & Günster, J., Mar 2023, In: Applied Sciences (Switzerland). 13, 6, 3974.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Influence of platform preheating on in situ precipitation in an FeCoMo alloy during laser powder bed fusion

    Cui, C., Leitner, H., Platl, J. & Schnitzer, R., Mar 2023, In: Materials characterization. 197.2023, March, 10 p., 112689.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    In-situ transmission electron microscopy analysis of the degree of heterogeneities in a metallic glass

    Zhang, N. Z., Sun, K., Şopu, D., Spieckermann, F., Ma, X., Geng, C., Bian, X., Jia, Y., Wang, Q., Wang, G. & Eckert, J., Mar 2023, In: Intermetallics. 154.2023, March, 10 p., 107807.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Novel Structural and Functional Material Properties Enabled by Nanocomposite Design

    Eckert, J. (Editor) & Kiener, D. (Editor), Mar 2023, Multidisciplinary Digital Publishing Institute (MDPI).

    Research output: Book/Report › Book › Research

  43. E-pub ahead of print

    Microstructural influences on fatigue threshold behavior and fracture toughness of an additively manufactured γ-titanium aluminide

    Zeiler, S., Lintner, A., Schloffer, M., Pippan, R. & Hohenwarter, A., 22 Feb 2023, (E-pub ahead of print) In: Intermetallics. 156.2023, May, 9 p., 107852.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Exploring the anneal hardening phenomenon in nanocrystalline Pt-Ru alloys

    Renk, O., Hohenwarter, A., Maier-Kiener, V. & Pippan, R., 15 Feb 2023, In: Journal of alloys and compounds. 935.2023, Part 1, 15 February, 11 p., 168005.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Probing the composition dependence of residual stress distribution in tungsten-titanium nanocrystalline thin films

    Sinojiya, R. J., Paulachan, P., Falah Chamasemani, F., Bodlos, R., Hammer, R., Zalesak, J., Reisinger, M., Scheiber, D., Keckes, J., Romaner, L. & Brunner, R., 15 Feb 2023, In: Communications materials. 2023, 4, 12 p., 11.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Thermal stability of MoNbTaTiW, MoNbTaVW and CrMoNbTaW thin films deposited by high power impulse magnetron sputtering

    Gruber, G., Lassnig, A., Žák, S., Gammer, C., Cordill, M. & Franz, R., 15 Feb 2023, In: Surface & coatings technology. 454.2023, 15 February, 7 p., 129189.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Analyse der Prozesskostenzusammensetzung bei der Herstellung additiv gefertigter, metallischer Bauteile in Kleinst- und Kleinserien durch pulverbettbasiertes Laserstrahlschmelzen

    Bodner, S. C., 12 Feb 2023, 103 p.

    Research output: Thesis › Master's Thesis

  48. E-pub ahead of print

    Inverse parameter determination for metal foils in multifunctional composites

    Trost, C. O. W., Krobath, M., Žák, S., Hammer, R., Krivec, T., Gänser, H.-P., Trost, T. W., Hohenwarter, A. & Cordill, M. J., 9 Feb 2023, (E-pub ahead of print) In: Materials and Design. 227.2023, March, 13 p., 111711.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Can Severe Plastic Deformation Tune Nanocrystallization in Fe-Based Metallic Glasses?

    Antoni, M., Spieckermann, F., Plutta, N., Gammer, C., Kapp, M., Ramasamy, P., Polak, C., Pippan, R., Zehetbauer, M. J. & Eckert, J., 1 Feb 2023, In: Materials. 16.2023, 3, 14 p., 1260.

    Research output: Contribution to journal › Article › Research › peer-review

  50. E-pub ahead of print

    Oxidation behavior of a cathodic arc evaporated Cr0.69Ta0.20B0.11N coating

    Kainz, C., Letofsky-Papst, I., Saringer, C., Krüger, H., Stark, A., Schell, N., Pohler, M. & Czettl, C., 1 Feb 2023, (E-pub ahead of print) In: Journal of vacuum science & technology / A (JVST). 41.2023, 2, 10 p., 023102.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Special Issue “Novel Structural and Functional Material Properties Enabled by Nanocomposite Design”

    Eckert, J. & Kiener, D., 1 Feb 2023, In: Nanomaterials. 13.2023, 3, 3 p., 586.

    Research output: Contribution to journal › Editorial › peer-review

Previous 1...3 4 5 6 7 8 9 10 ...110 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9/1.UG, 8700 Leoben