Department Materials Science

Organisational unit: Departments and Institutes

751 - 800 out of 5,456Page size: 50

Research output

  1. 2021
  2. Published

    In Situ Synchrotron X-Ray Diffraction during High-Pressure Torsion Deformation of Ni and NiTi

    Kerber, M. B., Spieckermann, F., Schuster, R., von Baeckmann, C., Fischer, T., Schell, N., Waitz, T. & Schafler, E., Nov 2021, In: Advanced engineering materials. 23, 11, 9 p., 2100159.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Microstructure and mechanical properties of novel TiAl alloys tailored via phase and precipitate morphology

    Wimler, D., Lindemann, J., Kremmer, T., Clemens, H. & Mayer, S., Nov 2021, In: Intermetallics. 138.2021, November, 10 p., 107316.

    Research output: Contribution to journal › Article › Research › peer-review

  4. E-pub ahead of print

    Development of segregations in a Mg–Mn–Nd alloy during HPT processing

    de Oliveira, P. C., Montoro, L. A., Perez-Prado, M. T., Hohenwarter, A., Figueiredo, R. B. & Isaac, A., 23 Oct 2021, (E-pub ahead of print) In: Materials Science and Engineering A. 802.2021, 20 January, 140423.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Grain refinement effect on the Ti-45Nb alloy electrochemical behavior in simulated physiological solution

    Cvijović-Alagić, I., Laketić, S., Bajat, J., Hohenwarter, A. & Rakin, M., 15 Oct 2021, In: Surface and Coatings Technology. 423.2021, 15 October, 9 p., 127609.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Aluminum depletion induced by co-segregation of carbon and boron in a bcc-iron grain boundary

    Ahmadian, A., Scheiber, D., Zhou, X., Gault, B., Liebscher, C., Romaner, L. & Dehm, G., 14 Oct 2021, In: Nature Communications. 12, 1, p. 1-11 6008.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Real-Time Observation of “Soft” Magic-Size Clusters during Hydrolysis of the Model Metallodrug Bismuth Disalicylate

    Szczerba, D., Tan, D., Do, J.-L., Titi, H. M., Mouhtadi, S., Chaumont, D., Marco de Lucas, M. D. C., Geoffroy, N., Meyer, M., Rousselin, Y., Hudspeth, J. M., Schwanen, V., Spörk-Erdely, P., Dippel, A.-C., Ivashko, O., Gutowski, O., Glaevecke, P., Bazhenov, V., Arhangelskis, M. & Halasz, I. & 2 others, Friscic, T. & Kimber, S. A. J., 13 Oct 2021, In: Journal of the American Chemical Society. 143.2021, 40, p. 16332-16336 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Distribution distortion in the statistical analysis of strength data when using multiple specimen batches

    Salem, J. A., Lube, T., Béhar-Lafenêtre, S. & Baker, E. H., 5 Oct 2021, In: Journal of the European Ceramic Society. 42

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    On the evolution of banded microstructures in an electron beam melted Ti-48Al-2Cr-2Nb alloy

    Wartbichler, R., Clemens, H., Mayer, S., Ghibaudo, C., Rizza, G., Galati, M., Iuliano, L., Biamino, S. & Ugues, D., 5 Oct 2021.

    Research output: Contribution to conference › Poster › Research

  10. Published

    Enhanced thermal stability of (Ti,Al)N coatings by oxygen incorporation

    Holzapfel, D. M., Music, D., Hans, M., Wolff-Goodrich, S., Holec, D., Bogdanovski, D., Arndt, M., Eriksson, A. O., Yalamanchili, K., Primetzhofer, D., Liebscher, C. & Schneider, J. M., 1 Oct 2021, In: Acta materialia. 218.2021, 1 October, 13 p., 117204.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Mechanical properties of CrN-based superlattices: Impact of magnetism

    Löfler, L., Hahn, R., Mayrhofer, P. H., Bartosik, M. & Holec, D., 1 Oct 2021, In: Acta materialia. 218.2021, 1 October, 13 p., 117095.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Bending behavior of zinc-coated hot stamping steels

    Hofer, C., Stadler, M., Kurz, T., Maier-Kiener, V., Mayerhofer, A., Hebesberger, T. & Schnitzer, R., Oct 2021, In: Steel research international. 92, 10, p. 1-9 2100149.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Pressure- and temperature-dependent diffusion from first-principles: A case study of V and Ti in a TiN matrix

    Nayak, G. K., Popov, M. N. & Holec, D., 25 Sept 2021, In: Surface & coatings technology. 422.2021, 25 September, 10 p., 127491.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Electrons meet alloy development: A γ-TiAl-based alloy showcase

    Holec, D., Abdoshahi, N., Gehringer, D., Hatzenbichler, L., Sakic, A. & Clemens, H., 18 Sept 2021, In: Advanced engineering materials. 24.2022, 14 p., 2100977.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Cathode spot behavior in nitrogen and oxygen gaseous atmospheres and concomitant cathode surface modifications

    Golizadeh Najafabadi, M., Mendez Martin, F., Kolozsvári, S., Anders, A. & Franz, R., 15 Sept 2021, In: Surface & coatings technology. 421.2021, 15 September, 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Enhancement of Interfacial Hydrogen Interactions with Nanoporous Gold-Containing Metallic Glass

    Sarac, B., Ivanov, Y. P., Micusik, M., Karazehir, T., Putz, B., Dancette, S., Omastova, M., Greer, A. L., Sarac, A. S. & Eckert, J., 15 Sept 2021, In: ACS Applied Materials and Interfaces. 13.2021, 36, p. 42613-42623 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Microstructure and mechanical properties of arc evaporated Ti(Al,Si)N coatings

    Moritz, Y., Kainz, C., Tkadletz, M., Czettl, C., Pohler, M. & Schalk, N., 15 Sept 2021, In: Surface & coatings technology. 421.2021, 15 September, 8 p., 127461.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Theoretical investigation of the 70.5° mixed dislocations in body-centered cubic transition metals

    Romaner, L., Pradhan, T., Kholtobina, A., Drautz, R. & Mrovec, M., 15 Sept 2021, In: Acta materialia. 217.2021, 15 September, 10 p., 117154.

    Research output: Contribution to journal › Article › Research › peer-review

  19. E-pub ahead of print

    Ultralow-temperature superplasticity and its novel mechanism in ultrafine-grained Al alloys

    Chinh, N. Q., Murashkin, M. Y., Bobruk, E. V., Lábár, J. L., Gubicza, J., Kovács, Z., Ahmed, A. Q., Maier-Kiener, V. & Valiev, R. Z., 15 Sept 2021, (E-pub ahead of print) In: Materials Research Letters [Elektronische Ressource]. 9.2021, 11, p. 475-482 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    In-situ fracture determination of a W-Cu nanocomposite

    Burtscher, M., Schmuck, K. S., Wurmshuber, M., Alfreider, M. & Kiener, D., 14 Sept 2021.

    Research output: Contribution to conference › Poster › Research

  21. Published

    Size effect assessment by Weibull’s approach and the coupled criterion

    Doitrand, A., Henry, R., Lube, T. & Meille, S., 10 Sept 2021, In: Engineering Fracture Mechanics. 256, 107979.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Porosity and thickness effect of Pd–Cu–Si metallic glasses on electrocatalytic hydrogen production and storage

    Sarac, B., Karazehir, T., Yüce, E., Mühlbacher, M., Sarac, A. S. & Eckert, J., 7 Sept 2021, In: Materials and Design. 210.2021, 15 November, 9 p., 110099.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    An atomistic view on Oxygen, antisites and vacancies in the γ-TiAl phase

    Razumovskiy, V. I., Ecker, W., Wimler, D., Fischer, F.-D., Appel, F., Mayer, S. & Clemens, H., Sept 2021, In: Computational materials science. 197.2021, September, 8 p., 110655.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Antibacterial Cu Ion Release from Pt-and Pd-Based Bulk Metallic Glasses for Dental and Medical Applications

    Eckert, J., Sept 2021.

    Research output: Contribution to conference › Presentation › Research › peer-review

  25. Published

    Coherent Transport from Molecular Dynamics

    Spitaler, T., Bedoya-Martínez, N., Romaner, L. & Hammer, R., Sept 2021.

    Research output: Contribution to conference › Poster › Research

  26. Published

    Correlating point defects with mechanical properties in nanocrystalline TiN thin films

    Zhang, Z., Ghasemi, A., Koutná, N., Xu, Z., Grünstäudl, T., Song, K., Holec, D., He, Y., Mayrhofer, P. H. & Bartosik, M., Sept 2021, In: Materials and Design. 207.2021, September, p. 1-10 109844.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Effect of nanoparticles on morphology and size of primary silicon and property of selective laser melted Al-high Si content alloys

    Xi, L., Guo, S., Ding, K., Prashanth, K. G., Sarac, B. & Eckert, J., Sept 2021, In: Vacuum. 191, September, 10 p., 110405.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Effects of acid leaching treatment of soda lime silicate glass on crack initiation and fracture

    Sheth, N., Greenly, C., Bermejo, R., Mauro, J. C., Pantano, C. G. & Kim, S. H., Sept 2021, In: Journal of the American Ceramic Society. 104.2021, 9, p. 4550-4558 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Improved fracture resistance of Cu/Mo bilayers with thickness tailoring

    Cordill, M. J., Jörg, T., Többens, D. & Mitterer, C., Sept 2021, In: Scripta materialia. 202.2021, September, 5 p., 113994.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Influence of Microalloying Elements and Deformation Parameters on the Recrystallization and Precipitation Behavior of Two Low-Alloyed Steels

    Monschein, S., Kapp, M., Zügner, D., Fasching, J., Landefeld, A. & Schnitzer, R., Sept 2021, In: Steel research international. 92.2021, 9, 9 p., 2100065.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    In-situ TEM investigation of toughening in Silicon at small scales

    Issa, I., Gammer, C., Kolitsch, S., Hohenwarter, A., Imrich, P. J., Pippan, R. & Kiener, D., Sept 2021, In: Materials today. 48, 48, p. 29-37 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Morphology of cracks and shear bands in polymer-supported thin film metallic glasses

    Glushko, O., Gammer, C., Weniger, L.-M., Sheng, H., Mitterer, C. & Eckert, J., Sept 2021, In: Materials Today Communications. 28.2021, September, 11 p., 102547.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    The Role of Phase Hardness Differential on the Non-uniform Elongation of a Ferrite-Martensite Dual Phase Steel

    Basu, S., Jaya, B. N., Patra, A., Ganguly, S., Dutta, M., Hohenwarter, A. & Samajdar, I., Sept 2021, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 52.2021, 9, p. 4018-4032 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Changing morphological features in a semi-crystalline polymer in material-extrusion based additive manufacturing

    Petersmann, S., Spörk-Erdely, P., Feuchter, M., Wieme, T., Arbeiter, F. & Spoerk, M., 30 Aug 2021, Polymer Meeting 14: Book of Abstracts. Slugovec, C. & Trimmel, G. (eds.). TU Graz, p. 60 CL-A4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Flexible nanoporous activated carbon for adsorption of organics from industrial effluents

    Zulfiqar, U., Kostoglou, N., Thomas, A. G., Rebholz, C., Matthews, A. & Lewis, D. J., 27 Aug 2021, In: Nanoscale. 13.2021, 36, p. 15311-15323 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. E-pub ahead of print

    Influence of high pressure torsion on microstructure evolution and mechanical properties of AZ80/SiC magnesium matrix composites

    Akbaripanah, F., Sabbaghian, M., Fakhar, N., Khaleghi, A. A., Minárik, P., Veselý, J., Hung, P. T., Kapoor, G., Renk, O., Máthis, K., Gubicza, J. & Eckert, J., 20 Aug 2021, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 826.2021, 5 October, 11 p., 141916.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Disordered interfaces enable high temperature thermal stability and strength in a nanocrystalline aluminum alloy

    Balbus, G. H., Kappacher, J., Sprouster, D. J., Wang, F., Shin, J., Eggeler, Y. M., Rupert, T. J., Trelewicz, J. R., Kiener, D., Maier-Kiener, V. & Gianola, D. S., 15 Aug 2021, In: Acta Materialia. 215.2021, 15 August, 14 p., 116973.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Effects of Ni and Co alloying on thermal, magnetic and structural properties of Fe-(Ni,Co)-P-C metallic glass ribbons

    Yüce, E., Sarac, B., Ketov, S., Reissner, M. & Eckert, J., 15 Aug 2021, In: Journal of alloys and compounds. 872.2021, 15 August, 9 p., 159620.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Structural homology of the strength for metallic glasses

    Yang, W., Sun, X., Liu, H., Yu, C., Li, W., Inoue, A., Şopu, D., Eckert, J. & Tang, C., 10 Aug 2021, In: Journal of Materials Science and Technology. 81.2021, 10 August, p. 123-130 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Atomic diffusivities in amorphous and liquid Cu-Zr: Kirkendall effects and dependence on packing density

    Ketov, S. V., Ivanov, Y. P., Putz, B., Zhang, Z., Eckert, J. & Greer, A. L., 1 Aug 2021, In: Acta Materialia. 214, 1 August, 8 p., 116993.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Atomic insights on intermixing of nanoscale nitride multilayer triggered by nanoindentation

    Chen, Z., Zheng, Y. H., Löfler, L., Bartosik, M., Nayak, G. K., Renk, O., Holec, D., Mayrhofer, P. H. & Zhang, Z., 1 Aug 2021, In: Acta materialia. 214, 1 August, 11 p., 117004.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Surface stress of gold nanoparticles revisited

    Holec, D., Löfler, L., Zickler, G., Vollath, D. & Fischer, F.-D., 1 Aug 2021, In: International journal of solids and structures. 224.2021, 1 August, p. 1-13 13 p., 111044.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Effective Methanol Oxidation with Platinum Nanoparticles-Decorated Poly(2-bromomethyl-2-methyl-3,4-propylenedioxythiophene)-Coated Glassy Carbon Electrode

    Karazehir, T., Sarac, B., Gilsing, H. D., Eckert, J. & Sarac, A. S., Aug 2021, In: Journal of the Electrochemical Society. 168.2021, 8, 086503.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    First-principles calculations to investigate pressure effect on mechanical and thermal properties of ZrAl2

    Tang, M., Rong, Z. C., Li, F. X., Yi, J. H., Eckert, J. & Liu, Y. C., Aug 2021, In: Computational & theoretical chemistry. 1202.2021, August, 10 p., 113304.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Porosity evolution in organic matter-rich shales (Qingshankou Fm.; Songliao Basin, NE China): Implications for shale oil retention

    Zhang, P., Misch, D., Hu, F., Kostoglou, N., Sachsenhofer, R., Liu, Z., Meng, Q. T. & Bechtel, A., Aug 2021, In: Marine and petroleum geology. 130.2021, August, p. 1-17 17 p., 105139.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Mechanochemical synthesis of rosin-modified montmorillonite: A breakthrough approach to the next generation of ommt/rubber nanocomposites

    Esmaeili, E., Rounaghi, S. A. & Eckert, J., 31 Jul 2021, In: Nanomaterials. 11.2021, 8, 14 p., 1974.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Interfacial structure and wear properties of selective laser melted Ti/(TiC plus TiN) composites with high content of reinforcements

    Xi, L., Ding, K., Gu, D., Guo, S., Cao, M., Zhuang, J., Lin, K., Okulov, I., Sarac, B., Eckert, J. & Prashanth, K. G., 25 Jul 2021, In: Journal of alloys and compounds. 870, 25 July, 9 p., 159436.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Copper and its effects on microstructure and correlated tensile properties of super duplex stainless steels

    Ressel, G., Gsellmann, M., Brandl, D., Landefeld, A., Keplinger, A., Zhang, Z., Maier-Kiener, V. & Schnitzer, R., 21 Jul 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 821, 821, p. 1-11 141544.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Cryo-Casting for Controlled Decomposition of Cu-Zr-Al Bulk Metallic Glass into Nanomaterials: Implications for Design Optimization

    Sarac, B., Kim, J. T., Ivanov, Y. P., Soprunyuk, V., Ketov, S. V., Schranz, W., Hong, S. H., Kim, K. B., Greer, A. L. & Eckert, J., 19 Jul 2021, In: ACS Applied Nano Materials. 4.2021, 8, p. 7771-7780 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Influence of bias voltage on microstructure, mechanical properties and thermal stability of arc evaporated Cr0.74Ta0.26N coatings

    Kainz, C., Pohler, M., Gruber, G., Tkadletz, M., Ebner, A., Czettl, C. & Schalk, N., 15 Jul 2021, In: Surface & coatings technology. 417.2021, 15 July, 8 p., 127212.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Selective Laser Melting of Al-7Si-0.5 Mg-0.5Cu: Effect of Heat Treatment on Microstructure Evolution, Mechanical Properties and Wear Resistance

    Wang, P., Yu, S., Shergill, J., Chaubey, A., Eckert, J., Prashanth, K. G. & Scudino, S., 15 Jul 2021, In: Acta metallurgica Sinica (English letters).

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...12 13 14 15 16 17 18 19 ...110 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9/1.UG, 8700 Leoben