Chair of Processing of Composites and Design for Recycling (270)

Organisational unit: Chair

121 - 140 out of 372Page size: 20

Research output

  1. 2020
  2. Published

    Elliptic paraboloid flow front modelling for in-plane permeability characterization of textile fabrics by the radial flow technique

    Fauster, E., Berg, D. C., May, D., Endruweit, A., Blößl, Y. & Schledjewski, R., 2020, ECCM 2018 - 18th European Conference on Composite Materials. (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Integration of Carbon Fiber Reinforced Plastic Components in a Car Body Structure

    Gfrerrer, M., 2020

    Research output: Thesis › Master's Thesis

  4. Published

    Online thermography inspection for automated tape layup

    Yadav, N., Oswald-Tranta, B., Schledjewski, R. & Habicher, M., 2020, Thermosense: Thermal Infrared Applications XLII. Oswald-Tranta, B. & Zalameda, J. N. (eds.). SPIE, Vol. 11409. 114090H. (Proceedings of SPIE).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Pultrusion of thermoset based profiles-state of the art regarding materials, process set-ups, process modeling, and process simulation

    Costa Dias, R. D. C., 2020

    Research output: Thesis › Doctoral Thesis

  6. 2019
  7. E-pub ahead of print

    A reference specimen for compaction tests of fiber reinforcements

    May, D., Kühn, F., Etchells, M., Fauster, E., Endruweit, A. & Lira, C., 13 Dec 2019, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 5.2019, 4, p. 230-233 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    High performance composite with 100% bio-based carbon content

    Anusic, A., Blößl, Y. & Resch-Fauster, K., 12 Nov 2019.

    Research output: Contribution to conference › Poster › Research

  9. Published

    SAFE AND EFFICIENT HEATING – HOW TO IDENTIFY THE BEST PERFORMING HEATING METHOD FOR THERMOPLASTIC TAPE PLACEMENT

    Schledjewski, R. & Yadav, N., 17 Sept 2019, Proceedings SAMPE Europe Conference 2019 Nantes.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Influence of test fluids on the permeability of epoxy powder bindered non-crimp fabrics

    Tonejc, M., Ebner, C., Fauster, E. & Schledjewski, R., 1 Aug 2019, In: Advanced Manufacturing: Polymer and Composites Science. 5.2019, 3, p. 128-139 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. E-pub ahead of print

    Liquid composite molding reproducibility in real-world production of fiber reinforced polymeric composites: a review of challenges and solutions

    Konstantopoulos, S., Hueber, C., Antoniadis, I., Summerscales, J. & Schledjewski, R., 1 Jul 2019, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 5.2019, 3, p. 85-99 15 p.

    Research output: Contribution to journal › Review article › peer-review

  12. Published

    Investigation on the Influence of Pressure Terms in a Volume-Averaged Energy Balance in the Modelling of Liquid Composite Moulding Processes

    Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 27 Jun 2019, Key Engineering Materials. Hausmann, J. (ed.). Vol. 809. p. 480-486 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exercise

    May, D., Aktas, A., Advani, S. G., Berg, D. C., Endruweit, A., Fauster, E., Lomov, S. V., Long, A., Mitschang, P., Abaimov, S., Abliz, D., Akhatov, I., Ali, M. A., Allen, T. D., Bickerton, S., Bodaghi, M., Caglar, B., Caglar, H., Chiminelli, A. & Correia, N. & 35 others, Cosson, B., Danzi, M., Dittmann, J., Ermanni, P., Francucci, G., George, A., Grishaev, V., Hancioglu, M., Kabachi, M. A., Kind, K., Deléglise-Lagardère, M., Laspalas, M., Lebedev, O. V., Lizaranzu, M., Liotier, P. J., Middendorf, P., Morán, J., Park, C. H., Pipes, R. B., Pucci, M. F., Raynal, J., Rodriguez, E. S., Schledjewski, R., Schubnel, R., Sharp, N., Sims, G., Sozer, E. M., Sousa, P., Thomas, J., Umer, R., Wijaya, W., Willenbacher, B., Yong, A., Zaremba, S. & Ziegmann, G., 1 Jun 2019, In: Composites Part A: Applied Science and Manufacturing. 121.2019, June, p. 100-114 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Parameter selection for peel strength optimization of thermoplastic CF-PA6 for humm3TM

    Yadav, N. & Schledjewski, R., Jun 2019, p. 297-302. 6 p.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Synthesis and thermo mechanical properties of a 100% bio based epoxy resin composite

    Anusic, A., Mahendran, A. R., Blößl, Y. & Resch-Fauster, K., Jun 2019.

    Research output: Contribution to conference › Poster › Research

  16. Published

    LIQUID COMPOSITE MOLDING – A BROAD RANGE OF PROCESSING TECHNIQUES BEING VERSATILE AND CHALLENGING

    Schledjewski, R., Hergan, P. & Fauster, E., 15 May 2019, Proceedings of Polymer Composites 2019.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Selective comparison of heating sources for thermoplastic Automated Tape Placement

    Yadav, N. & Schledjewski, R., May 2019, Automated Composites Manufacturing (ACM4): Fourth International Symposium. Hoa, S. V. (ed.). 8 p. 1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Study on incorrect predictions for simulations of the vacuum infusion process

    Sebastian, R. G., Obertscheider, C. & Schledjewski, R., 25 Apr 2019, 28. Leobener Kunststoff-Kolloquium 2019: Schriftenreihe Kunststofftechnik Leoben. Schuecker, C. & Fuchs, P. (eds.). Vol. 9.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Uncertainty propagation and sensitivity analysis in composite manufacturing cost estimation: ALPHA-framework and cost tool development

    Hueber, C., Schwingshandl, N. & Schledjewski, R., 19 Apr 2019, In: Advanced Manufacturing: Polymer and Composites Science. 5.2019, 2, p. 69 - 84 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Custom OpenFOAM solver for modelling Liquid Composite Moulding processes

    Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 13 Mar 2019.

    Research output: Contribution to conference › Abstract

  21. Published

    Minimum invasive production-related SLS specimen manufacturing for interface characterization of hybrid materials made by RTM

    Hergan, P., Lechner, C., Fauster, E., Pilz, G. & Schledjewski, R., 15 Jan 2019, In: International Journal of Advanced Manufacturing Technology. 102.2019, 5-8, p. 1963-1972 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Flash and inductive thermography for CFRP inspection

    Oswald-Tranta, B., Tuschl, C. & Schledjewski, R., 1 Jan 2019, Thermosense: Thermal Infrared Applications XLI. de Vries, J. & Oswald-Tranta, B. (eds.). SPIE, 110040L. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11004).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...3 4 5 6 7 8 9 10 ...19 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 2701