Chair of Polymer Processing (350)

Organisational unit: Chair

451 - 500 out of 946Page size: 50

Research output

  1. 2015
  2. Published

    Filling behaviour of wood plastic composites

    Duretek, I., 7 Oct 2015, p. 47. 1 p.

    Research output: Contribution to conference › Presentation › Research

  3. Published

    Filling behaviour of wood plastic composites

    Duretek, I., Lucyshyn, T. & Holzer, C., 7 Oct 2015, p. 47. 1 p.

    Research output: Contribution to conference › Abstract

  4. Published

    Material data for numerical simulation of powder in jection molding

    Duretek, I., 6 Oct 2015, p. 154. 1 p.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    Viscosity and creep compliance of polyoxymethylene copolymers of various average molecular weights

    Gonzalez-Gutierrez, J., Oblak, P., Megen, Z. & Emri, I., Oct 2015, In: Polimery/Polymers. 2015, 10, p. 620-627 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Orientation of Anisometric Layered Silicate Particles in Uncompatibilized and Compatibilized Polymer Melts under Shear Flow: A Dissipative Particle Dynamics Study

    Gooneie, A., Schuschnigg, S. & Holzer, C., 29 Sept 2015, In: Macromolecular Theory and Simulations. 25.2016, 1, p. 85-98 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Influence of the relative printing angle on surface topography of 3d printed parts manufactured by fff technique

    Haar, B., Walluch, M., Katschnig, M. & Holzer, C., 23 Sept 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  8. Published

    Optimization of Twin Screw Extrusion using CFD for Polymer/Nanoclay Composites: Polymer Processing Society Regional Conference Graz 2015 Book of Abstracts

    Schuschnigg, S., Battisti, M., Winkler-Ebner, J., Friesenbichler, W. & Holzer, C., 21 Sept 2015, p. 182.

    Research output: Contribution to conference › Abstract

  9. Published

    Rheological Behaviour of Bronze Feedstocks at Low Shear Rates

    Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 14 Sept 2015, Euro PM2015 Congress Proceedings. Reims, France: European Powder Metallurgy Association, 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Measurement of interdiffusion in polymeric materials by applying Raman spectroscopy

    Bruckmoser, K., Resch, K., Kisslinger, T. & Lucyshyn, T., Sept 2015, In: Polymer Testing. 46, p. 122-133 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Cartucho explosivo

    Moser, P. (Inventor), Bauer, F. (Inventor), Friesenbichler, W. (Inventor), Fertschej, A. (Inventor) & Schatzer, R. (Inventor), 25 Jun 2015, IPC No. F42D 1/ 10 A I, Patent No. ES2538987T, Priority date 25 Mar 2011, Priority No. WO2011EP54635

    Research output: Patent

  12. Published

    Weld line improvement of short fiber reinforced thermoplastics with a movable flow obstacle

    Janko, M., Spiegl, B., Kaufmann, A., Lucyshyn, T. & Holzer, C., 15 Jun 2015, In: Journal of Applied Polymer Science. 132, 23, p. 1-12 12 p., 42025.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Effect of selective localization of carbon nanotubes in PA6 dispersed phase of PP/PA6 blends on the morphology evolution with time, part 1: Droplet deformation under simple shear flows

    Gooneie, A., Nazockdast, H. & Shahsavan, F., 7 May 2015, In: Polymer engineering and science. 55.2015, July, p. 1504-1519 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Correlation between Rheotens measurements and reinforcement of polymer nanocomposites in the injection molding compounder

    Battisti, M. G., Friesenbichler, W., Duretek, I. & Guttmann, P., 15 Apr 2015, In: Journal of physics / Conference series. 602, 1, 012012.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Halogenfrei flammgehemmte Polyolefin-Compounds

    Mattausch, H., 15 Apr 2015.

    Research output: Contribution to conference › Presentation › Research

  16. Published

    流動性基材で作製される部品の製造を制御するための音響ノイズ感知

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Müller, F. (Inventor) & Rath, G. (Inventor), 26 Mar 2015, IPC No. B29C 45/ 76 A I, Patent No. JP2015509054, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  17. Published

    ACOUSTIC NOISE SENSING FOR CONTROLLING MANUFACTURE OF A COMPONENT PART MADE OF A FLOWABLE BASE MATERIAL

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Muller, F. (Inventor), 29 Jan 2015, IPC No. B29C 45/ 76 A I, Patent No. US2015028507, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  18. Published

    Chemical/physical preprocessing of nanoclay particles

    Riess, G. & Schauberger, J., 8 Jan 2015, Polymer Nanoclay Composites. Elsevier, p. 27-51 25 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  19. Published

    Processability and mechanical properties of extensively recycled high density polyethylene

    Oblak, P., Gonzalez-Gutierrez, J., Zupančič, B., Aulova, A. & Emri, I., 1 Jan 2015, In: Polymer Degradation and Stability. 114, p. 133-145 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Analysis on factors affecting the demolding of micro-structured devices in the injection molding process

    Strohmayer, B., 2015, 102 p.

    Research output: Thesis › Master's Thesis

  21. Published

    Besondere Aspekte bei der Herstellung mikrostrukturierter Spritzgussteile

    Lucyshyn, T., Struklec, T., Burgsteiner, M., Graninger, G. & Holzer, C., 2015, Schriftenreihe Kunststofftechnik Leoben: 24. Leobener Kunststoff-Kolloquium. Leoben, Vol. 05. p. 198-207 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Demolding of micro-structured surfaces in the injection molding process

    Struklec, T., 2015

    Research output: Thesis › Doctoral Thesis

  23. Published

    Development of halogen-free flame retardant polypropylene compounds for pipe application

    Mattausch, H., 2015

    Research output: Thesis › Doctoral Thesis

  24. Published

    Dissipative Particle Dynamics Simulations of Orientation of Layered Silicate Particles Embedded in Polymer Melts under Shear Flows

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2015, Abstract from PPS2015 - Polymer Processing Society Conference 2015, Graz, Austria. p. 144

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Dissipative Particle Dynamics Simulations of Orientation of Layered Silicate Particles Embedded in Polymer Melts under Shear Flows

    Gooneie, A., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  26. Published

    Effect of Chain Length on the Rheology of Dissipative Particle Dynamics Models of Polymer Fluids

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2015, Danube Vltava Sava Polymer Meeting - DVSPM 2015, Proceedings of a Conference on Polymer Science.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Effect of Chain Length on the Rheology of Dissipative Particle Dynamics Models of Polymer Fluids

    Gooneie, A., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  28. Published

    Grafting of vinyl phosphoric acid monomers for the crosslinking of polypropylene

    Mattausch, H., Spörk, M., Rieß, G. & Holzer, C., 2015.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Grafting of vinyl phosphoric acid monomers for the crosslinking of polypropylene

    Mattausch, H., Spörk, M., Rieß, G. & Holzer, C., 2015, PPS Graz - Konferenzbeitrag.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Influence of Supercritical Carbon Dioxide on TPE based Composites

    Gallaun, U., 2015, Conference Proceedings: 30th International Conference of the Polymer Processing Society. Cleveland, p. 525-525

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Kinetics and mechanism of the biodegradation of PLA/clay nanocomposites during thermophilic phase of composting process

    Stloukal, P., Pekarova, S., Kalendova, A., Mattausch, H., Laske, S., Holzer, C., Chitu, L., Bodner, S., Maier, G., Slouf, M. & Koutny, M., 2015, In: Waste management. 42, p. 31-40 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Multiscale Simulation of Polymer Nanocomposites in Processing: Challenges and Outlooks

    Gooneie, A., Mattausch, H., Witschnigg, A., Schuschnigg, S. & Holzer, C., 2015, Material Forming ESAFORM 2015: Selected, peer reviewed papers from the 18th International ESAFORM Conference on Material Forming (ESAFORM 2015), April 15-17, 2015, Graz, Austria.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Multiscale Simulation of Polymer Nanocomposites in Processing: Challenges and Outlooks

    Gooneie, A., Mattausch, H., Witschnigg, A., Schuschnigg, S. & Holzer, C., 2015, Key engineering materials. Vol. 651-653. p. 533-538 6 p. (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  34. Published

    Neuentwicklung eines Tauchcomputers mit berührungssensitivem Display

    Thallinger, F., 2015

    Research output: Thesis › Master's Thesis

  35. Published

    Numerical simulations of the flow of wood polypropylene composites with wall slipping in a profile die: The significance of material data

    Gooneie, A., Schuschnigg, S., Duretek, I. & Holzer, C., 2015, In: AIP Conference Proceedings. 1664, 1

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Optimization of the injection molding technology for profiled high-performance thermoplastic sealing elements

    Janko, M., 2015

    Research output: Thesis › Doctoral Thesis

  37. Published

    Polymer Nanoclay Composits: Processing of polymer-nanoclay composits (Chapter 3)

    Katschnig, M. & Battisti, M., 2015, Elsevier. (Micro & Nano Technologies Series)

    Research output: Book/Report › Anthology › Research

  38. Published

    Research in manufacturing of micro-structured injection molded polymer parts

    Lucyshyn, T., Struklec, T., Burgsteiner, M., Graninger, G. & Holzer, C., 2015, AIP Conference Proceedings. Vol. 1695. p. 1-9 9 p. 020014

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Rheological properties of wood polymer composites and their role in extrusion

    Duretek, I., Schuschnigg, S., Gooneie, A., Langecker, G. & Holzer, C., 2015, In: Journal of physics / Conference series. 602, 1, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Rheologie für den Kunststoffverarbeiter

    Duretek, I., 2015, VDI Wissensforum - EXTRUSIONSWERKZEUGE FÜR PROFILE UND ROHRE (03FO010005), 29. und 30. September 2015. Karlsruhe, 25 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Rheology of Polymer-layered Silicate Nanocomposites in Steady-Shear Flows: A Dissipative Particle Dynamics Study

    Gooneie, A., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  42. Published

    Rheology of Polymer-layered Silicate Nanocomposites in Steady-Shear Flows: A Dissipative Particle Dynamics Study

    Gooneie, A., Schuschnigg, S. & Holzer, C., 2015, The 2nd International Conference on Rheology and Modeling of Materials, Book of abstracts. p. 51

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Simulation Aided Twin Screw Optimization for Polymer Nanoclay Composites

    Schuschnigg, S., Battisti, M., Joachim, W.-E., Friesenbichler, W. & Holzer, C., 2015, Danube Vltava Sava Polymer Meeting-DVSPM 2015 : Proceedings of a Conference on Polymer Science. Linz, p. 88 O13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Study of the Formation of Globule-like Surface Microstructures on Polyacrylamide Nano-films Synthesized via Electro-polymerization Process

    Shahsavan, F., Gooneie, A., Shoja Chaykar, A., Shahkaram, M. & Eslami, H., 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    Study of the Formation of Globule-like Surface Microstructures on Polyacrylamide Nano-films Synthesized via Electro-polymerization Process

    Gooneie, A., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  46. Published

    The mold in the focus of research for improved quality of injection molded parts

    Lucyshyn, T., 2015

    Research output: Thesis › Habilitation thesis › peer-review

  47. 2014
  48. Published

    MESSUNG VON AKUSTISCHEM RAUSCHEN ZUR STEUERUNG DER HERSTELLUNG EINES BAUTEILS AUS EINEM FLIESSFÄHIGEN GRUNDMATERIAL

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor), Müller, F. (Inventor), Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Müller, F. (Inventor), 3 Dec 2014, IPC No. G01N 29/ 46 A I, Patent No. EP2807011, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  49. Published

    Recycling of Borehole Solids in Polymers

    Hofstätter, H. (Inventor) & Holzer, C. (Inventor), 20 Nov 2014, IPC No. C08K 5/ 00 A I, Patent No. US2014343219, Priority date 14 Sept 2012, Priority No. WO2012EP68165

    Research output: Patent

  50. Published

    Acoustic noise sensing for controlling manufacture of a component part made of a flowable base material

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Mueller, F. (Inventor), 12 Nov 2014, IPC No. B29C 45/ 76 A I, Patent No. CN104144778, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  51. Published

    ACOUSTIC NOISE SENSING FOR CONTROLLING MANUFACTURE OF A COMPONENT PART MADE OF A FLOWABLE BASE MATERIAL

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Mueller, F. (Inventor), 8 Oct 2014, IPC No. B29C 45/ 76 A I, Patent No. KR20140119154, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  52. Published

    Selection of appropriate polyoxymethylene-based binder for powder injection molding feedstock

    Gonzalez-Gutierrez, J., 8 Sept 2014, In: Zeitschrift Kunststofftechnik : Journal of plastics technology. 10, 5, p. 150 164 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...6 7 8 9 10 11 12 13 ...19 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 3501