Chair of Polymer Processing (350)

Organisational unit: Chair

151 - 200 out of 946Page size: 50

Research output

  1. 2021
  2. Published

    Extrusion and Additive Manufacturing

    Schuschnigg, S., Hentschel, L., Cano Cano, S. & Momeni, V., 15 Sept 2021.

    Research output: Contribution to conference › Poster › Research

  3. Published

    Material extrusion additive manufacturing of multi-material components

    Cano Cano, S., Valy, L., Liu, D., Maurer, P., Ma, N., Czernilofsky, F., Schuschnigg, S., Sui, G., Kitzmantel, M., Kukla, C. & Gonzalez-Gutierrez, J., 15 Sept 2021, 29th Leoben-Conference on Polymer Engineering & Science. p. 184 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Thermal Conductive Polymer Compounds for Material Extrusion Additive Manufactured of Heat Sinks

    Holzer, C., Schuschnigg, S. & Cano Cano, S., 15 Sept 2021, 29th Leoben-Conference on Polymer Engineering & Science. p. 250 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Tribological properties of extrusion based additive manufactured parts

    Stiller, T., Hausberger, A., Schuschnigg, S., Höfle, W. & Schnetzinger, K., 15 Sept 2021, 29th Leoben-Conference on Polymer Engineering & Science. p. 252 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Why is mechanical recycling of bioplastics important for a circular economy?

    Main, P. & Lucyshyn, T., 15 Sept 2021.

    Research output: Contribution to conference › Poster › Research

  7. Published

    Tex2Mat- the recycling of multi-material textiles

    Jenull, U., 13 Sept 2021.

    Research output: Contribution to conference › Presentation › Research

  8. Published

    Fused Filament Fabrication-Based Additive Manufacturing of Commercially Pure Titanium

    Thompson, Y., Polzer, M., Gonzalez-Gutierrez, J., Kasian, O., Heckl, J. P., Dalbauer, V., Kukla, C. & Felfer, P., 12 Sept 2021, In: Advanced Engineering Materials. 23.2021, 12, 12 p., 2100380.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Thermal conductive, electrically insulating polymer compounds using material extrusion additive manufacturing for electronic parts

    Holzer, C., Cano Cano, S., Schuschnigg, S. & Hentschel, L., 2 Sept 2021, p. 32-32. 1 p.

    Research output: Contribution to conference › Abstract

  10. Published

    Indirect Additive Manufacturing Techniques for Metal Parts: Binder-Based Additive Manufacturing Techniques

    Gonzalez-Gutierrez, J., 1 Sept 2021, Encyclopedia of Materials: Metals and Alloys. The Netherlands: Elsevier, p. 319-329 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  11. Published

    The Relationship between a Defined Microstructure within the Mold Surface and the Corresponding Roughness on the Part: A Systematic Study on Particle Size, Filler-, and Compatibilizer Content

    Kerschbaumer, R. C., Bolka, S., Pesl, T., Duretek, I. & Lucyshyn, T., 17 Aug 2021, In: Polymers. 13.2021, 16, 23 p., 2757.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Bending Properties of Lightweight Copper Specimens with Different Infill Patterns Produced by Material Extrusion Additive Manufacturing, Solvent Debinding and Sintering

    Gonzalez-Gutierrez, J., Cano Cano, S., Ecker, J. V., Kitzmantel, M., Arbeiter, F., Kukla, C. & Holzer, C., 6 Aug 2021, In: Applied Sciences : open access journal. 11, 16, 7262.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Determination of material data for two PIM-feedstocks for injection molding simulation using Moldex3D

    Duretek, I., 9 Jul 2021, 12 p.

    Research output: Book/Report › Commissioned report › Research

  14. Published

    Bestimmung der Stoffdaten an zwei CIM-Feedstocks der Type CIM DC25B und IMZD02

    Duretek, I., 23 Apr 2021, 30 p.

    Research output: Book/Report › Commissioned report › Research

  15. Published

    Functionally graded additive manufacturing

    Pei, E., Rumana Kabir, I., Godec, D., Gonzalez-Gutierrez, J. & Nordin, A., 9 Apr 2021, Additive Manufacturing with Functionalized Nanomaterials: Micro and Nono Technologies. Amsterdam, Neterlands: Elsevier, p. 35-54 20 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  16. Published

    Viskositätsmessungen an einer PP/Öl-Mischung am Hochdruckkapillarrheometer

    Duretek, I., 25 Feb 2021, 6 p.

    Research output: Book/Report › Commissioned report › Research

  17. Published

    Resins for Frontal Photopolymerization: Combining depth-cure and tunable mechanical properties

    Ebner, C., Mitterer, J., Gonzalez-Gutierrez, J., Rieß, G. & Kern, W., 5 Feb 2021, In: Materials. 14.2021, 4, 10 p., 743.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Processability of Different Polymer Fractions Recovered from Mixed Wastes and Determination of Material Properties for Recycling

    Möllnitz, S., Feuchter, M., Duretek, I., Schmidt, G., Pomberger, R. & Sarc, R., 31 Jan 2021, In: Polymers. 13.2021, 3, p. 1-43 43 p., 457.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Temperature Profile in Rubber Injection Molding: Application of a Recently Developed Testing Method to Improve the Process Simulation and Calculation of Curing Kinetics

    Traintinger, M., Roman Christopher, K., Lechner, B., Friesenbichler, W. & Lucyshyn, T., 26 Jan 2021, In: Polymers. 13.2021, 3, p. 1-12 12 p., 380.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Powder content in powder extrusion moulding of tool steel: Dimensional stability, shrinkage and hardness

    Gonzalez-Gutierrez, J., Thompson, Y., Handl, D., Cano Cano, S., Schuschnigg, S., Felfer, P., Kukla, C., Holzer, C. & Burkhardt, C., 15 Jan 2021, In: Materials letters. 283, January 2021, 5 p., 128909.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Advanced processing of thermoplastic-based particulate composites

    Gonzalez-Gutierrez, J., 2021

    Research output: Thesis › Habilitation thesis › peer-review

  22. Published

    Effect of backbone selection on the solvent debinding of metal injection moulding feedstocks

    Kukla, C., Cano, S., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 2021, Euro PM2021 Congress Proceedings. (Euro PM2021 Congress Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Einfluss von unterschiedlichen Schmelzrippen-Geometrien auf die Dichtheit von Kunststoffumspritzungen von Steckverbindern

    Preissegger, F., 2021

    Research output: Thesis › Master's Thesis

  24. Published

    Suitability of Recycled PLA Filament Application in Fused Filament Fabrication Process

    Breški, T., Hentschel, L., Godec, D. & Duretek, I., 2021, In: Technical journal : scientific professional journal of University North . 15.2021, 4, p. 491-497 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. 2020
  26. Published

    Damage tolerance-based methodology for fatigue lifetime estimation of a structural component produced by material extrusion-based additive manufacturing

    Arbeiter, F., Trávníček, L., Petersmann, S., Dlhý, P., Spoerk, M., Pinter, G. & Hutař, P., Dec 2020, In: Additive Manufacturing. 36, 101730.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Thermal conductivity measurement of one polyester-compound (polycaprolactone)

    Duretek, I., 16 Nov 2020, 5 p.

    Research output: Book/Report › Commissioned report › Research

  28. Published

    Processing Conditions of a Medical Grade Poly(Methyl Methacrylate) with the Arburg Plastic Freeforming Additive Manufacturing Process

    Hentschel, L., Kynast, F., Petersmann, S., Holzer, C. & Gonzalez-Gutierrez, J., 2 Nov 2020, In: Polymers. 12, 11, p. 1-15 15 p., 2677.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Rheological Behaviour of Highly Filled Materials for Injection Moulding and Additive Manufacturing: Effect of Particle Material and Loading

    Bek, M., Gonzalez-Gutierrez, J., Kukla, C., Pušnik Crešnar, K., Maroh, B. & Slemenik Perše, L., 2 Nov 2020, In: Applied Sciences : open access journal. 10, 22, p. 1-23 23 p., 7993.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Using Compliant Interlayers as Crack Arresters in 3-D-Printed Polymeric Structures

    Arbeiter, F., Petersmann, S., Wiener, J., Oesterreicher, F., Spörk, M. & Pinter, G. G., 1 Nov 2020, In: Materials Performance and Characterization. 9, 5, 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Factors Affecting the Properties of POM-based Feedstocks for Fused Filament Fabrication/FFF

    Kukla, C., Hentschel, L., Cano Cano, S., Kitzmantel, M., Holzer, C. & Gonzalez-Gutierrez, J., 5 Oct 2020. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  32. Published

    Eingliederung von Additiven Fertigungstechnologien in einen klinischen Prozess zur Herstellung von medizinischen Implantaten

    Hentschel, L., Gonzalez-Gutierrez, J. & Holzer, C., 1 Oct 2020, In: Jahresmagazin Kunststofftechnik : Ingenieurwissenschaften ... : im Fokus . 2020, p. 56-61

    Research output: Contribution to journal › Article › Research

  33. Published

    Untersuchung der Verarbeitbarkeit von vier verschiedenen PUR-Elastomeren

    Duretek, I., 7 Sept 2020, 34 p.

    Research output: Book/Report › Commissioned report › Research

  34. Published

    Biofunctional Glycol-Modified Polyethylene Terephthalate and Thermoplastic Polyurethane Implants by Extrusion-Based Additive Manufacturing for Medical 3D Maxillofacial Defect Reconstruction

    Katschnig, M., Wallner, J., Janics, T., Burgstaller, C., Zemann, W. & Holzer, C., 5 Aug 2020, In: Polymers. 12.2020, 8, 1751.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Additive Fertigung metallischer und keramischer Bauteile: Einsatz der Materialextrusion insbesondere der Verwendung von Filamenten für Sinterverfahren

    Kukla, C., Schuschnigg, S. & Holzer, C., Aug 2020, In: Industrie 4.0 Management. 36.2020, 4, p. 20-24 5 p.

    Research output: Contribution to journal › Article › Research

  36. Published

    Influence of the Infill Orientation on the Properties of Zirconia Parts Produced by Fused Filament Fabrication

    Cano Cano, S., Lube, T., Huber, P., Gallego, A., Naranjo, J. A., Berges, C., Schuschnigg, S., Herranz, G., Kukla, C., Holzer, C. & Gonzalez-Gutierrez, J., 15 Jul 2020, In: Materials. 13.2020, 14, 19 p., 3158.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    An Overview of Material Extrusion Troubleshooting

    Loh, G. H., Pei, E., Gonzalez-Gutierrez, J. & Monzon, M., 11 Jul 2020, In: Applied Sciences : open access journal. 10, 14, 28 p., 4776.

    Research output: Contribution to journal › Review article › peer-review

  38. Published

    Research and Implementation of Axial 3D Printing Method for PLA Pipes

    Zhang, H., Zhong, W., Hu, Q., Aburaia, M., Gonzalez-Gutierrez, J. & Lammer, H., 7 Jul 2020, In: Applied Sciences : open access journal. 10.2020, 13, 19 p., 4680.

    Research output: Contribution to journal › Article › Research › peer-review

  39. E-pub ahead of print

    Additive Manufacturing of Steel and Copper Using Fused Layer Modelling: Material and Process Development

    Ecker, J. V., Dobrezberger, K., Gonzalez-Gutierrez, J., Spoerk, M., Gierl-Mayer, C. & Danninger, H., 15 Jun 2020, (E-pub ahead of print) In: Powder metallurgy progress. 19.2019, 2, p. 63-81 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    A Production Method for Standardized Continuous Fiber Reinforced FFF Filament

    Aburaia, M., Bucher, C., Lackner, M., Gonzalez-Gutierrez, J., Zhang, H. & Lammer, H., 20 May 2020, In: Biomaterials and Medical Applications. 4.2020, 1, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Epoxy-anhydride vitrimers from aminoglycidyl resins with high glass transition temperature and efficient stress relaxation

    Giebler, M., Sperling, C., Kaiser, S., Duretek, I. & Schlögl, S., 17 May 2020, In: Polymers. 12, 5, p. 1 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Qualifizierung von Materialien für medizinische Anwendungen mittels des Arburg Freeformers

    Holzer, C., Hentschel, L., Kynast, F., Schuschnigg, S. & Gonzalez-Gutierrez, J., 15 May 2020. 2 p.

    Research output: Contribution to conference › Abstract

  43. Published

    Mechanical properties of polymeric implant materials produced by extrusion-based additive manufacturing

    Petersmann, S., Spörk, M., Van De Steene, W., Üçal, M., Wiener, J., Pinter, G. G. & Arbeiter, F., 1 Apr 2020, In: Journal of the Mechanical Behavior of Biomedical Materials. 104.2020, April, 13 p., 103611.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Modeling and Estimation of the Pressure and Temperature dependent Bulk Density of Polymers

    Kneidinger, C., Längauer, M., Zitzenbacher, G., Schuschnigg, S. & Miethlinger, J., 24 Feb 2020, In: International polymer processing. 35.2020, 1, p. 70-82 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Modification of Interfacial Interactions in Ceramic-Polymer Nanocomposites by Grafting: Morphology and Properties for Powder Injection Molding and Additive Manufacturing

    Cano Cano, S., Gooneie, A., Kukla, C., Rieß, G., Holzer, C. & Gonzalez-Gutierrez, J., 21 Feb 2020, In: Applied Sciences : open access journal. 10.2020, 4, 18 p., 1471.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Polymer-bonded anisotropic SrFe12O19 filaments for fused filament fabrication

    Huber, C., Cano Cano, S., Teliban, I., Schuschnigg, S., Groenefeld, M. & Suess, D., 12 Feb 2020, In: Journal of applied physics. 127.2020, 6, 8 p., 063904.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Optimization of the 3D Printing Parameters for Tensile Properties of Specimens Produced by Fused Filament Fabrication of 17-4PH Stainless Steel

    Godec, D., Cano Cano, S., Holzer, C. & Gonzalez-Gutierrez, J., 8 Feb 2020, In: Materials. 13.2020, 3, 23 p., 774.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Development of new treatment methods for multi material textile waste

    Jenull-Halver, U., Holzer, C., Piribauer, B. & Quartinello, F., 10 Jan 2020, AIP Conference Proceedings 2205. 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Development of a PAT-controlled process for the production of pharmaceutical polymers with low drug concentration

    Heindl, N., 2020

    Research output: Thesis › Master's Thesis

  50. Published

    Development of Ceramic Feedstocks for Fused Filament Fabrication

    Cano Cano, S., 2020

    Research output: Thesis › Doctoral Thesis

  51. Published

    Process validation and optimization of a two-step two-component direct bonding between thermoplastic and rubber

    Huber, S., 2020

    Research output: Thesis › Master's Thesis

  52. Published

    Production of multimaterial components by material extrusion - Fused filament fabrication (ME-FFF)

    Kukla, C., Cano, S., Moritz, T., Müller-Köhn, A., Günther, A., Hampel, S. & Holzer, C., 2020, Euro PM 2018 Congress and Exhibition. (Euro PM 2018 Congress and Exhibition).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 6 7 8 ...19 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 3501