Chair of Polymer Processing (350)

Organisational unit: Chair

101 - 150 out of 946Page size: 50

Research output

  1. 2022
  2. Published

    Metal Injection Molding of Low Alloy Steel by Using a Palm Stearin/HDPE Binder System

    Momeni, V., Dec 2022, Key engineering materials. (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  3. Published

    The effect of carbon fiber content on physico-mechanical properties of recycled poly(ethylene terephthalate) composites additively manufactured with fused filament fabrication

    Katalagarianakis, A., Van de Voorde, B., Pien, N., Polyzos, E., Duretek, I., Holzer, C., Cardon, L., Bernaerts, K. V., Van Hemelrijck, D., Van Vlierberghe, S. & Pyl, L., Dec 2022, In: Additive Manufacturing. 60.2022, Part A, December, 14 p., 103246.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Determination of thermal conductivity of six thermoplastic compounds

    Duretek, I., 28 Nov 2022, 11 p.

    Research output: Book/Report › Commissioned report › Research

  5. Published

    Determination of pvT-behavior of two various polyolefin-compounds

    Duretek, I., 25 Nov 2022, 6 p.

    Research output: Book/Report › Commissioned report › Research

  6. Published

    Process Optimization of Injection Overmolding Structural Electronics with Regard to Film Distortion

    Hubmann, M., Madadnia, B., Groten, J., Pletz, M., Vanfleteren, J., Stadlober, B., Bossuyt, F., Kaur, J. & Lucyshyn, T., 22 Nov 2022, In: Polymers. 14.2022, 23, 20 p., 5060.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Dynamic Behavior of Thermally Affected Injection-Molded High-Density Polyethylene Parts Modified by Accelerated Electrons

    Mizera, A., Krstulovic-Opara, L., Krempl, N., Karhankova , M., Manas, M., Sanek , L., Stoklasek, P. & Grebo, A., 16 Nov 2022, In: Polymers 2022 / Advances in the Mechanical Behavior of Polymeric Materials). 14:2022, 22, 15 p., 4970.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Influence of Binder Composition and Material Extrusion (MEX) Parameters on the 3D Printing of Highly Filled Copper Feedstocks

    Sadaf, M., Cano Cano, S., Gonzalez-Gutierrez, J., Bragaglia, M., Schuschnigg, S., Kukla, C., Holzer, C., Vály , L., Kitzmantel, M. & Nanni, F., 16 Nov 2022, In: Polymers / Molecular Diversity Preservation International. 14.2022, 22, 23 p., 4962.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Pack2theLoop – Closing the circle of polyolefin packaging

    Krempl, N., Pinter, E., Jahn, E. & Bichler, L., 9 Nov 2022.

    Research output: Contribution to conference › Poster › Research

  10. Published

    In-situ alignment of 3D printed anisotropic hard magnets

    Suppan, M., Huber, C., Mathauer, K., Abert, C., Bruckner, F., Gonzalez-Gutierrez, J., Schuschnigg, S., Groenefeld, M., Teliban, I., Kobe, S., Saje, B. & Suess, D., 20 Oct 2022, In: Scientific reports (London : Nature Publishing Group). 12.2022, October, 6 p., 17590.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Influence of Viscose Fibre Geometry on the Structure–Property Relationships of High-Density Polyethylene Composites

    Slapnik, J., Kraft, G., Wilhelm, T., Hribernik, M., Švab, I., Lucyshyn, T. & Pinter, G. G., 18 Oct 2022, In: Polymers. 14.2022, 20, 15 p., 4389.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Peroxide-Based Crosslinking of Solid Silicone Rubber, Part I: Insights into the Influence of Dicumylperoxide Concentration on the Curing Kinetics and Thermodynamics Determined by a Rheological Approach

    Azevedo, M., Monks, A. M., Kerschbaumer, R. C., Schlögl, S. & Holzer, C., 18 Oct 2022, In: Polymers. 14.2022, 20, 22 p., 4404.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    A Study on Over-Molded Copper-Based Flexible Electronic Circuits

    Bakr, M., Hubmann, M., Bossuyt, F. & Vanfleteren, J., 16 Oct 2022, In: Micromachines. 13.2022, 10, 27 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Hardness Loss of Plastic Mold Steels: Phenomenon in Injection Molding

    Zidar, D., Landefeld, A., Gschöpf, B., Schnitzer, R., Zunko, H. & Friesenbichler, W., 28 Sept 2022, In: Steel research international. 94.2022, 4, 7 p., 2200326.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Anti-Adhesive Organosilane Coating Comprising Visibility on Demand

    Kern, W., Müller, M., Bandl, C., Krempl, N. & Kratzer, M., 24 Sept 2022, In: Polymers. 14.2022, 19, 20 p., 4006.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Low-Temperature Fibre Direct Compounding of Cellulose Fibres into PA6

    Slapnik, J., Liu, Y., Kupfer, R., Lucyshyn, T., Nardin, B. & Pinter, G., 23 Sept 2022, In: Materials. 15.2022, 19, 14 p., 6600.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    LightCycle: Upcycling of regenerates and injection moulding into high quality light weight components using a new technological approach

    Krempl, N. & Friesenbichler, W., 15 Sept 2022.

    Research output: Contribution to conference › Poster › Research

  18. Published

    Wear phenomena in injection molding – Novel wear testing device for detecting dissipation effects in wear of plastic mold steels

    Zidar, D., 15 Sept 2022, 30th Leoben-Conference on Polymer Engineering & Science Conference Proceeding. Chair of Polymer Processing (ed.). Department of Polymer Engineering and Science, Montanuniversität Leoben, p. 120-131 11 p. (Publication Series Polymer Engineering & Science Leoben; vol. 11).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    A Guide to Additive Manufacturing

    Godec, D. (Editor), Gonzalez-Gutierrez, J. (Editor), Nordin, A. (Editor), Pei, E. (Editor) & Alcázar, J. U. (Editor), 14 Sept 2022, 1 ed. 324 p. (Springer Tracts in Additive Manufacturing)

    Research output: Book/Report › Anthology › Research

  20. Published

    Effect of Increased Powder-Binder Adhesion by Backbone Grafting on the Properties of Feedstocks for Ceramic Injection Molding

    Ghasemi-Mobarakeh, L., Cano, S., Momeni, V., Liu, D., Duretek, I., Riess, G., Kukla, C. & Holzer, C., 2 Sept 2022, In: Polymers. 14.2022, 17, 15 p., 3653.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Developing a Feedstock for the Fused Filament Fabrication (FFF) of Aluminium

    Momeni, V., Shahroodi, Z., Kukla, C. & Holzer, C., Sept 2022, Conference: 2nd International Conference on Polymer Process Innovation.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Messung der Materialdaten von zwei PA66 GF-Compounds

    Duretek, I., 19 Aug 2022, 6 p.

    Research output: Book/Report › Commissioned report › Research

  23. Published

    Rheotens-Messungen an verschiedenen PP-Compounds

    Duretek, I., 17 Aug 2022, 8 p.

    Research output: Book/Report › Commissioned report › Research

  24. Published

    Freeformer im OP: Projekt CAMed: Implementierung additiver Fertigung im klinischen Bereich.

    Hentschel, L., 1 Aug 2022, In: today. Das ARBURG Magazin. 2022, 80, p. 16-17 2 p.

    Research output: Contribution to journal › Article › Research

  25. Published

    Novel Additive Manufacturing Materials for Waste Heat Deduction

    Schuschnigg, S., Hufnagl, M., Holzer, C., Eder, F., Kroke, E., Schallmeiner, S., Regula, C., Hamedi, Y., Grosche, C., Morganti, E. & Seidler, K., 29 Jul 2022, In: Advanced engineering materials. 2022, 10 p., 22006714.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Recycling GFRP composites: How to assess environmental performance?

    Kirschnick, U., Krempl, N. & Schledjewski, R., 20 Jul 2022.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    Anti-adhesive coating comprising visibility-on-demand: a smart approach for quality control

    Bandl, C., Müller, M., Kern, W. & Krempl, N., Jun 2022.

    Research output: Contribution to conference › Poster › Research

  28. Published

    Parameter Optimization of the ARBURG Plastic Freeforming Process by Means of a Design of Experiments Approach

    Hentschel, L., Petersmann, S., Gonzalez-Gutierrez, J., Kynast, F., Schäfer, U., Arbeiter, F. & Holzer, C., 31 May 2022, In: Advanced engineering materials. 24.2022, 11 p., 2200279.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    The Effects of Washing and Formaldehyde Sterilization on the Mechanical Performance of Poly(methyl Methacrylate) (PMMA) Parts Produced by Material Extrusion-Based Additive Manufacturing or Material Jetting

    Petersmann, S., Hentschel, L., Gonzalez-Gutierrez, J., Tödtling, M., Schäfer, U., Arbeiter, F. & Üçal, M., 13 May 2022, In: Advanced engineering materials. 24.2022, 2200225.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Toward a new generation of vaginal pessaries via 3D-printing: Concomitant mechanical support and drug delivery

    Eder, S., Wiltschko, L., Koutsamanis, I., Afonso Urich, J. A., Arbeiter, F., Roblegg, E. & Spoerk, M., May 2022, In: European Journal of Pharmaceutics and Biopharmaceutics. 174.2022, May, p. 77-89 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    The influence of recyclates on the mechanical and long-term properties of virgin materials

    Hinczica, J., Geier, J., Kirschnick, U., Holzer, C., Frank, A. & Pinter, G. G., 11 Apr 2022.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Mechanical properties of additively manufactured polymeric implant materials in dependence of microstructure, temperature and strain-rate

    Petersmann, S., Spörk, M., Van De Steene, W., Üçal, M., Wiener, J., Pinter, G. G. & Arbeiter, F., 5 Apr 2022, Abstract Book of 18th European Mechanics of Materials Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    The influence of recyclates on the mechanical and long-term properties of virgin materials

    Hinczica, J., Geier, J., Kirschnick, U., Holzer, C., Frank, A. & Pinter, G. G., 4 Apr 2022.

    Research output: Contribution to conference › Paper › peer-review

  34. Published

    Ein zweites Leben für Haushaltsverpackungen: Ein Kooperationsprojekt des Kunststoff-Clusters aus der Sicht der Beteiligten

    Krempl, N., Lielacher, R., Nadherny-Borutin, S., Aschermayer, F., Baumann, A., Schuch, D. & Schlenz, E., Apr 2022, In: Chemiereport.at : Austrian life sciences ; Österreichs Magazin für Chemie, Life Sciences & Materialwissenschaften. 2022, 4, p. 33-35 3 p.

    Research output: Contribution to journal › Article › Research

  35. Published

    Injection Molding Simulation of Polyoxymethylene Using Crystallization Kinetics Data and Comparison with the Experimental Process

    Schrank, T., Berer, M., Haar, B., Ramoa, B., Lucyshyn, T., Feuchter, M., Pinter, G., Speranza, V. & Pantani, R., 23 Mar 2022, In: Polymer crystallization. 2022, 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Effect of extrusion and fused filament fabrication processing parameters of recycled poly(ethylene terephthalate) on the crystallinity and mechanical properties

    Van de Voorde, B., Katalagarianakis, A., Huysman, S., Toncheva, A., Raquez, J. M., Duretek, I., Holzer, C., Cardon, L., Bernaerts, K. V., Van Hemelrijck, D., Pyl, L. & Van Vlierberghe, S., Feb 2022, In: Additive Manufacturing. 50.2022, February, 14 p., 102518.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Investigating thermomechanical recycling of poly(ethylene terephthalate) containing phosphorus flame retardants

    Bascucci, C., Duretek, I., Lehner, S., Holzer, C., Gaan, S., Hufenus, R. & Gooneie, A., Jan 2022, In: Polymer Degradation and Stability. 195.2022, January, 11 p., 109783.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Anti-adhesive coating with visibility-on-demand properties for quality control

    Bandl, C., Müller, M., Kern, W. & Krempl, N., 2022.

    Research output: Contribution to conference › Poster › Research

  39. Published

    Development of Conductive Polymer Composites for the Material Extrusion of Dielectric Elastomer Actuators

    Steinert, T., 2022

    Research output: Thesis › Master's Thesis

  40. Published

    Filamentbasierter 3D-Druck für Metalle, Hartmetalle und Cermets

    Kukla, C., Duretek, I. & Lengauer, W., 2022, Pulvermetallurgie in Wissenschaft und Praxis: Pulvermetallurgie - vielfältige Prozesse und Werkstoffe. Broeckmann, C., Danninger, H. & Kaletsch, A. (eds.). Vol. 37. p. 75-103

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Introducing a visibility-on-demand property to an anti-adhesive coating. A smart approach for quality control

    Bandl, C., Kern, W. (Co-editor), Müller, M. (Co-editor) & Krempl, N. (Co-editor), 2022.

    Research output: Contribution to conference › Poster › Research

  42. Published

    Simulations of the filament printing of metal feedstocks with different nozzle designs

    Schuschnigg, S., Hubmann, M., Cano Cano, S., Hentschel, L., Holzer, C. & Gonzalez-Gutierrez, J., 2022, Proceedings of the WorldPM 2022, Lyon.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Systematische Bewertung der Kurzzeitstabilität von Spritzgießprozessen in einer flexiblen, vernetzten Produktion

    Handl, D., 2022

    Research output: Thesis › Master's Thesis

  44. 2021
  45. Published

    Relationships between the Decomposition Behaviour of Renewable Fibres and Their Reinforcing Effect in Composites Processed at High Temperatures

    Slapnik, J., Lucyshyn, T. & Pinter, G., 18 Dec 2021, In: Polymers. 13.2021, 24, 16 p., 4448.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    MFR-Messungen von einem thermoplastischen Compound

    Duretek, I., 17 Dec 2021, 3 p.

    Research output: Book/Report › Commissioned report › Research

  47. Published

    Biobased Plastics for a Circular Economy

    Main, P. & Lucyshyn, T., 30 Nov 2021.

    Research output: Contribution to conference › Poster › Research

  48. Published

    Analyse von textilen Abfällen aus PET und PA6

    Duretek, I., 22 Nov 2021, 65 p.

    Research output: Book/Report › Commissioned report › Research

  49. E-pub ahead of print

    Material extrusion additively manufactured alumina monolithic structures to improve the efficiency of plasma-catalytic oxidation of toluene

    Li, T., Gonzalez-Gutierrez, J., Raguz, I., Holzer, C., Li, M., Cheng, P., Kitzmantel, M., Shi, L. & Huang, L., 10 Nov 2021, (E-pub ahead of print) In: Additive Manufacturing. 37.2021, January, 9 p., 101700.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Effect of metal particle size and powder volume fraction on the filling performance of powder injection moulded parts with a microtextured surface

    Ammosova, L., Cano Cano, S., Schuschnigg, S., Kukla, C., Mönkkönen, K., Suvanto, M. & Gonzalez-Gutierrez, J., Nov 2021, In: Precision Engineering. 72.2021, November, p. 604-612 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Personalised urethra pessaries prepared by material extrusion-based additive manufacturing

    Spoerk, M., Arbeiter, F., Koutsamanis, I., Cajner, H., Katschnig, M. & Eder, S., 25 Oct 2021, In: International Journal of Pharmaceutics. 608.2021, 25 October, 13 p., 121112.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Influence of the Mold Material on the Injection Molding Cycle Time and Warpage Depending on the Polymer Processed

    Lucyshyn, T., Enffans D’Avernas, L. V. D. & Holzer, C., 21 Sept 2021, In: Polymers. 13.2021, 18, 16 p., 3196.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...19 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 3501