Chair of Physical Metallurgy (420)

Organisational unit: Chair

451 - 500 out of 2,174Page size: 50

Research output

  1. 2018
  2. Published

    High-resolution characterization of the martensite-austenite constituent in a carbide-free bainitic steel

    Hofer, C., Bliznuk, V., Verdiere, A., Petrov, R., Winkelhofer, F., Clemens, H. & Primig, S., 10 Jul 2018, In: Materials characterization. 144.2018, October, p. 182-190 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Ab initio inspired design of ternary boride thin films

    Moraes, V., Riedl, H., Fuger, C., Polcik, P., Bolvardi, H., Holec, D. & Mayrhofer, P. H., 18 Jun 2018, In: Scientific reports (London : Nature Publishing Group). 8.2018, p. 1-9 9 p., 9288.

    Research output: Contribution to journal › Article › Research › peer-review

  4. E-pub ahead of print

    Atomic scale investigations of thermally treated nano-structured Ti-Al-N/Mo-Si-B multilayers

    Aschauer, E., Sackl, S. C., Schachinger, T., Bolvardi, H., Arndt, M., Polcik, P., Riedl, H. & Mayrhofer, P. H., 18 Jun 2018, (E-pub ahead of print) In: Surface & coatings technology. 349.2018, September, p. 480-487 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    High Temperature Flow Behavior of Ultra-Strong Nanoporous Au assessed by Spherical Nanoindentation

    Leitner, A., Maier-Kiener, V. & Kiener, D., 24 May 2018, In: Nanomaterials. 8.2018, 6, p. 1-12 12 p., 366.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Essential refinements of spherical nanoindentation protocols for the reliable determination of mechanical flow curves

    Leitner, A., Maier-Kiener, V. & Kiener, D., 15 May 2018, In: Materials and Design. 146.2018, May, p. 69-80 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Effect of Morphological Differences on the Cold Formability of an Isothermally Heat-Treated Advanced High-Strength Steel

    Weißensteiner, I., Suppan, C., Hebesberger, T., Winkelhofer, F., Clemens, H. & Maier-Kiener, V., 10 Apr 2018, In: JOM. 70.2018, 8, p. 1567-1575 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Graphite under compression: shift of layer breathing and shear modes frequencies with interlayer spacing

    Sun, Y. W., Holec, D., Xu, Y. & Dunstan, D. J., 3 Apr 2018, In: Journal of Physics Communications. 2018, 2, p. 2-7 6 p., 045004.

    Research output: Contribution to journal › Article › Research › peer-review

  9. E-pub ahead of print

    Intermetallics: Tailoring microstructure and chemical composition of advanced γ-TiAl based alloys for improved creep resistance

    Kastenhuber, M., Klein, T., Clemens, H. & Mayer, S., 2 Apr 2018, (E-pub ahead of print) In: Intermetallics. 97.2018, June, p. 27-33 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    On the modelling of mixed lubrication of conformal contacts

    Bergmann, P., Grun, F., Gódor, I., Stadler, G. & Maier-Kiener, V., 26 Mar 2018, (E-pub ahead of print) In: Tribology International. 125.2018, September, p. 220-236 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Influence of carbon deficiency on phase formation and thermal stability of super-hard TaCy thin films

    Riedl, H., Glechner, T., Wojcik, T., Koutná, N., Kolozsvári, S., Paneta, V., Holec, D., Primetzhofer, D. & Mayrhofer, P. H., 9 Mar 2018, In: Scripta materialia. 149.2018, May, p. 150-154 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. E-pub ahead of print

    Pathways of phase transformation in β-phase-stabilized σ/γ-TiAl alloys subjected to two-step heat treatments

    Klein, T., Holec, D., Clemens, H. & Mayer, S., 9 Mar 2018, (E-pub ahead of print) In: Scripta materialia. 149.2018, May, p. 70-74 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. E-pub ahead of print

    Experimental and numerical investigations of the γ″ and γ′ precipitation kinetics in Alloy 718

    Drexler, A. K., Oberwinkler, B., Primig, S., Turk, C., Povoden-Karadeniz, E., Heinemann, A., Ecker, W. & Stockinger, M., 6 Mar 2018, (E-pub ahead of print) In: Materials Science and Engineering A. 723.2018, 18 April, p. 314-323 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    An ab initio study of mechanical and dynamical stability of MoSi2

    Friák, M., Holec, D. & Šob, M., 19 Feb 2018, In: Journal of alloys and compounds. 746.2018, 25 May, p. 720-728 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Stability and elasticity of metastable solid solutiions and superlattices in the MoN-TaN system: First-principles calculations

    Koutná, N., Holec, D., Friák, M., Mayrhofer, P. H. & Šob, M., 14 Feb 2018, In: Materials and Design. 144.2018, April, p. 310-322 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. E-pub ahead of print

    Pulvermetallurgische Herstellung von innovativen Hochtemperaturwerkstoffen

    Clemens, H., Mayer, S. & Heilmaier, M., 5 Feb 2018, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 5, p. 270-276 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Bulk metallic dual phase glasses by severe plastic deformation

    Krämer, L., Champion, Y., Kormout, K. S., Maier-Kiener, V. & Pippan, R., 12 Jan 2018, In: Intermetallics. 94.2018, March, p. 172-178 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    How grain boundary chemistry controls the fracture mode of molybdenum

    Leitner, K., Scheiber, D., Jakob, S., Primig, S., Clemens, H., Povoden-Karadeniz, E. & Romaner, L., 9 Jan 2018, In: Materials and Design. 142.2018, 15 March, p. 36-43 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Additive Manufacturing of a β-Solidifying γ-Titanium Aluminide Alloy

    Bürstmayr, R., 2018

    Research output: Thesis › Master's Thesis

  20. Published

    Advanced Titanium Aluminides - How to Improve the Creep Resistance via Compsitional and Microstructural Optimization

    Mayer, S., Kastenhuber, M. & Clemens, H., 2018, Materials Science Forum. Vol. 941.2018. p. 1484-1489 6 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  21. Published

    Aspects of Powder Characterization for Additive Manufacturing

    Wimler, D., Kardos, S., Lindemann, J., Clemens, H. & Mayer, S., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 9, p. 620-636 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Aspekte der Pulvercharakterisierung für die additive Fertigung

    Wimler, D., Kardos, S., Lindemann, J., Clemens, H. & Mayer, S., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 219-228

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Atomistic investigations on the role of dislocations and interfaces for the mechanical and physical properties of metallic alloys and inorganic-organic heterostructures

    Romaner, L., 2018

    Research output: Thesis › Habilitation thesis › peer-review

  24. Published

    Ausgewählte Methoden der quantitativen Phasenanalyse einer additiv gefertigten TNM-Titanaluminid-Legierung

    Wartbichler, R., Bürstmayr, R., Clemens, H. & Mayer, S., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 327-332

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Auswirkungen von Oberflächenschädigung auf die Festigkeit in spröden Einkristallen für mikroelektronische Anwendungen

    Gruber, M., Leitner, A., Bermejo, R., Supancic, P., Gindel, T., Kraleva, I. & Danzer, R., 2018, Praktische Metallographie Sonderband. Vol. 52. p. 241-246

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Beryllium - Eine Herausforderung für Präparation und mechanische Charakterisierung

    Siller, M., Kappacher, J., Rolli, R., Clemens, H. & Maier-Kiener, V., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 183-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Characterization of anisotropic pores and spatially oriented precipitates in sintered Mo-base alloys using small-angle neutron scattering

    Karge, L., Lang, D., Schatte, J., Gilles, R., Busch, S., Leibenguth, P., Clemens, H. & Petry, W., 2018, In: Journal of applied crystallography. 51.2018, p. 1706-1714 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Characterization of an orthorhombic phase in a water-quenched Ti-44Al-3Mo (at.%) alloy using in situ synchrotron diffraction and transmission electron microscopy

    Musi, M., 2018

    Research output: Thesis › Master's Thesis

  29. Published

    Combined theoretical and experimental study of Fe-Al-Ti superalloys

    Friák, M., Miháliková, I., Slávik, A., Homola, V., Bursikova, V., Pizurová, N., Pavlu, J., Dymacek, P., Dobes, F., Holec, D., Koutná, N., Jiraskova, Y. & Šob, M., 2018.

    Research output: Contribution to conference › Poster › Research

  30. Published

    Deformation behaviour of γ-TiAl based sheets studied by means of in situ synchrotron X-ray diffraction

    Erdely, P., Maawad, E., Staron, P., Schell, N., Clemens, H. & Mayer, S., 2018.

    Research output: Contribution to conference › Poster › Research

  31. Published

    Deformation in technical bcc and fcc materials - mechanical and correlative microstructural analyses

    Weißensteiner, I., 2018

    Research output: Thesis › Doctoral Thesis

  32. Published

    Development and characterisation of advanced intermetallic titanium aluminide alloys by means of diffraction and scattering techniques

    Erdely, P., 2018

    Research output: Thesis › Doctoral Thesis

  33. Published

    Elasticity of interfaces: a multi-method approach

    Holec, D., Koutná, N., Vsianská, M., Friák, M., Mayrhofer, P. H. & Šob, M., 2018.

    Research output: Contribution to conference › Poster › Research

  34. Published

    Entwicklung einer ausscheidungsverfestigten Eisenbasislegierung für Hochtemperaturanwendungen

    Godor, F. R., 2018

    Research output: Thesis › Doctoral Thesis

  35. Published

    Gefüge und mechanische Eigenschaften einer intermetallischen TNM-Legierung für den Einsatz als Rennsportventil nach einer neuen Herstellroute

    Tengg, L. M., 2018

    Research output: Thesis › Master's Thesis

  36. Published

    H-carbide precipitation behaviour in a C-containing β-solidifying TiAl alloy

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Klein, T., Mayer, S. & Clemens, H., 2018.

    Research output: Contribution to conference › Poster › Research

  37. Published

    Impact of the Microstructure of Refractory Metals on their Mechanical Properties - a Multi-Scale Study / Wie die Mikrostruktur von Refraktärmetallen deren mechanische Eigenschaften beeinflusst – eine skalenübergreifende Studie

    Maier-Kiener, V., Siller, M., Jakob, S., Leitner, K., Clemens, H., Lorich, A., Lang, D., Schatte, J., Eidenberger-Schober, M. & Knabl, W., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 9, p. 603-619 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Inductive heat treatment of a 50CrMo4 steel- evolution of microstructure and mechanical properties

    Eggbauer, A., 2018

    Research output: Thesis › Doctoral Thesis

  39. Published

    Interaction of precipitation, recovery and recrystallization in the Mo-Hf-C alloy MHC studied by multipass compression tests

    Siller, M., Lang, D., Schatte, J., Knabl, W., Clemens, H. & Maier-Kiener, V., 2018, In: International journal of refractory metals & hard materials. 73.2018, June, p. 199-203 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Interaction of the H2 molecule with carbon nanostructures: A DFT study

    Nöger, D., 2018

    Research output: Thesis › Master's Thesis

  41. Published

    Investigation of the Precipitation Behavior of H-Carbides in a TiAl Alloy containing Carbon by means of in- and ex-situ Characterization

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 10, p. 693-703 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Kombination von Nanoindentation und Mikroskopie zur Untersuchung von Aluminium-Legierungen im grob- und ultrafeinkörnigen Zustand

    Kappacher, J., Leitner, A., Clemens, H. & Maier-Kiener, V., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 177-182

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Kornfeinung ausscheidungsverfestigter Hochtemperaturferrite mittels Ce-haltiger Einschlüsse

    Godor, F. R., Mayerhofer, A., Presoly, P., Clemens, H., Mayer, S. & Bernhard, C., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 319-324

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Materials characterization with atom probe tomography and high resolution transmission electron microscopy

    Mendez Martin, F., Haberfehlner, G., Albu, M. & Trummer, C., 2018.

    Research output: Contribution to conference › Poster › Research

  45. Published

    Mechanical properties of CrN/TiN supperlattices from ab inito calculations

    Löfler, L., Bartosik, M., Mayrhofer, P. H. & Holec, D., 2018.

    Research output: Contribution to conference › Poster › Research

  46. Published

    Metallographische Methoden der Pulvercharacterisierung für die additive Fertigung

    Wimler, D., Kardos, S., Clemens, H. & Mayer, S., 2018, In: Jahresmagazin Materialographie, Metallographie : Ingenieurwissenschaften ... : im Fokus. 2018, p. 64-68

    Research output: Contribution to journal › Article › Research

  47. Published

    Mikrostrukturelle Charakterisierung einer pulvermetallurgisch hergestellten mehrphasigen TiAl-Legierung

    Burtscher, M., Pürstl, F., Schloffer, M., Mayer, S. & Clemens, H., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 151-156

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Mikrostrukturelle Charakterisierung von Molybdän- Korngrenzen mittels Mikrosäulen-Druckversuchen und Atomsondenuntersuchungen

    Jakob, S., Lorich, A., Eidenberger-Schober, M., Knabl, W., Clemens, H. & Maier-Kiener, V., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 171-176

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Multi method study of the stabilization of alumina on Al-Cr droplets

    Löfler, L., Holec, D. & Mayrhofer, P. H., 2018.

    Research output: Contribution to conference › Poster › Research

  50. Published

    Multi-Scale Microstructural Characterization: The Role of Classic and High-Resolution Metallography in the Developement of Modern High-Performance Materials

    Schnitzer, R., Hofer, C., Mayer, S., Panzenböck, M., Holec, D. & Clemens, H., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 9, p. 584-602 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Ordering and diffusionless transformations in TiAl

    Abdoshahi, N. & Holec, D., 2018.

    Research output: Contribution to conference › Poster › Research

Previous 1...6 7 8 9 10 11 12 13 ...44 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben