Chair of Physical Metallurgy (420)

Organisational unit: Chair

151 - 200 out of 2,174Page size: 50

Research output

  1. 2023
  2. Published

    Precipitation evolution of γ´ hardened fcc Fe-Ni based alloys

    Juarez Perez, L., 2023

    Research output: Thesis › Master's Thesis

  3. Published

    Prediction of fracture toughness and DBTT of a 15-5 PH steel

    Widowitsch, N., 2023

    Research output: Thesis › Master's Thesis

  4. Published

    Process-structure-property relationships of β-NiAl and η-Ni3Ti strengthened Co-free maraging steels

    Zeisl, S., 2023

    Research output: Thesis › Doctoral Thesis

  5. Published

    Realistic structural properties of amorphous SiNx from machine-learning-assisted molecular dynamics

    Nayak, G. K., Prashanth, S., Todt, J., Daniel, R. & Holec, D., 2023.

    Research output: Contribution to conference › Poster › Research

  6. Published

    Simulation of the mechanical response of the individual intermetallic phases in multi-phase γ titanium aluminides

    Seligmann, B., Spörk-Erdely, P. & Antretter, T., 2023.

    Research output: Contribution to conference › Poster › Research

  7. Published

    Structure and migration mechanisms of small vacancy clusters in Cu: A combined EAM and DFT study

    Fotopoulos, V., Mora-Fonz, D., Kleinbichler, M., Bodlos, R., Kozeschnik, E., Romaner, L. & Shluger, A. L., 2023, In: Nanomaterials. 13.2023, 9, 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Tailoring α2/γ and γ/γ interfaces in TiAl alloys via segregation: A multi-method study

    Gehringer, D., Holec, D., Huber, L. & Neugebauer, J., 2023.

    Research output: Contribution to conference › Poster › Research

  9. Published

    Temperature effect during mechanical alloying on the yttria evolution in the processing of an ODS FeCrMnNiCo alloy

    Mayer, M., 2023

    Research output: Thesis › Doctoral Thesis

  10. Published

    The effects of grain size on the elastic response of FeCrMnNiCo high entropy alloy: a molecular dynamics study

    Zetterberg, K., 2023

    Research output: Thesis › Master's Thesis

  11. Published

    Variation der Lösungsglühtemperatur und Festigkeitsmodellierung von Fe-12Ni Maraging-Stählen

    Karner, M., 2023

    Research output: Thesis › Master's Thesis

  12. 2022
  13. Published

    Elucidation of formation and transformation mechanisms of Ca-rich Laves phase in Mg-Al-Ca-Mn alloys

    LI, J., Zhou, X., Breen, A., Peng, Z., Su, J., Kürnsteiner, P., Correa, M. J. D., Chwałek, M. L., Wang, H., Holec, D., Mayer, J. & Dehm, G., 20 Dec 2022, In: Journal of alloys and compounds. 928.2022, 20 December, p. 1-12 12 p., 167177.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Long-Range Magnetic Order in Nickel Hydroxide-Functionalized Graphene Quantum Dots

    Michal, L., Roy, R., Holec, D., Perez, J. G., Pizurová, N., Necas, D., Doleckova, A., Medalova, J., Lepcio, P. & Zajickkova, L., 7 Dec 2022, In: Journal of physical chemistry letters. 13.2022, 49, p. 11536-11542 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Laser powder bed fusion of intermetallic titanium aluminide alloys using a novel process chamber heating system: A study on feasibility and microstructural optimization for creep performance

    Wartbichler, R., Maiwald-Immer, T., Pürstl, F. & Clemens, H., 5 Dec 2022, In: Metals : open access journal . 12.2022, 12, 23 p., 2087.

    Research output: Contribution to journal › Article › Research › peer-review

  16. E-pub ahead of print

    On the Temperature-Induced Equilibration of Phase Distribution and Microstructure in a Gas-Atomized Titanium Aluminide Powder

    Musi, M., Clemens, H., Stark, A. & Spörk-Erdely, P., 26 Nov 2022, (E-pub ahead of print) In: Advanced engineering materials. 25.2023, 6, 6 p., 2201242.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Stahlrecycling – Potenziale und Herausforderungen für innovatives und nachhaltiges Recycling

    Dworak, S., Fellner, J., Beermann, M., Häuselmann, M., Schenk, J., Michelic, S. K., Cejka, J., Sakic, A., Mayer, J. & Steininger, K., 25 Nov 2022, In: Österreichische Wasser- und Abfallwirtschaft : ÖWAW . 75.2023, Februar, p. 97-107 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. E-pub ahead of print

    An improved process scan strategy to obtain high-performance fatigue properties for Scalmalloy®

    Schimbäck, D., Mair, P., Kaserer, L., Perfler, L., Palm, F., Leichtfried, G. & Pogatscher, S., 22 Nov 2022, (E-pub ahead of print) In: Materials and Design. 224.2022, December, 11 p., 111410.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Critical Aspects Concerning Large-scale Production of a Batch-annealed Medium-Mn 780 MPa Grade for Automotive Applications

    Steineder, K., Krizan, D., Stadler, M., Ritsche, S., Berger, E., Holtmann, N., Schnitzer, R. & Schneider, R., 18 Nov 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 11, p. 513-516 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Publisher Correction: In situ fracture observations of distinct interface types within a fully lamellar intermetallic TiAl alloy (Journal of Materials Research, (2021), 36, 12, (2465-2478), 10.1557/s43578-020-00088-z)

    Burtscher, M., Alfreider, M., Schmuck, K. S., Clemens, H., Mayer, S. & Kiener, D., 14 Nov 2022, In: Journal of Materials Research. 37.2021, p. 3855 1 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  21. Published

    The role of alloying elements in NiAl and Ni3Ti strengthened Co-free maraging steels

    Zeisl, S., Landefeld, A., Van Steenberge, N., Chang, Y. & Schnitzer, R., 9 Nov 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 861.2022, 19 December, 9 p., 144313.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Microstructure, Plasticity and Ductility of a TNM+ Alloy Densified by Spark Plasma Sintering

    Musi, M., Deshayes, C., Molénat, G., Toualbi, L., Galy, B., Spörk-Erdely, P., Hantcherli, M., Monchoux, J.-P., Thomas, M., Clemens, H. & Couret, A., 8 Nov 2022, In: Metals : open access journal . 12.2022, 11, 22 p., 1915.

    Research output: Contribution to journal › Article › Research › peer-review

  23. E-pub ahead of print

    Effect of cold deformation on the stress corrosion cracking resistance of a high-strength stainless steel

    Truschner, M., Janda, A., Bodner, S. C., Keplinger, A. & Mori, G. K., 6 Nov 2022, (E-pub ahead of print) In: Journal of materials science. 57.2022, November, p. 20447–20461 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Mechanical performance of doped W–Cu nanocomposites

    Wurmshuber, M., Burtscher, M., Doppermann, S., Bodlos, R., Scheiber, D., Romaner, L. & Kiener, D., 1 Nov 2022, In: Materials Science and Engineering A. 857.2022, 1 November, 12 p., 144102.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Accurate ab initio modeling of solid solution strengthening in high entropy alloys

    Moitzi, F., Romaner, L., Ruban, A. V. & Peil, O., 24 Oct 2022, In: Physical review materials . 6.2022, 10, 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. E-pub ahead of print

    The effect of zirconium on the Ti-(42-46 at.%)Al system

    Musi, M., Kardos, S., Hatzenbichler, L., Holec, D., Stark, A., Allen, M., Güther, V., Clemens, H. & Spörk-Erdely, P., 2 Oct 2022, (E-pub ahead of print) In: Acta materialia. 241.2022, December, 13 p., 118414.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Ab initio study of alloying Impact on the stability of cementite in transformation-Induced plasticity-assisted advanced steels

    Sakic, A., Hofer, C., Schnitzer, R. & Holec, D., 18 Sept 2022, In: Advanced engineering materials. 24.2022, 11, 10 p., 2200532.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Precipitation-based grain boundary design alters Inter- to Trans-granular Fracture in AlCrN Thin Films

    Meindlhumer, M., Ziegelwanger, T., Zalesak, J., Hans, M., Löfler, L., Spor, S., Jäger, N., Stark, A., Hruby, H., Daniel, R., Holec, D., Schneider, J. M., Mitterer, C. & Keckes, J., 15 Sept 2022, In: Acta materialia. 237.2022, 15 September, 18 p., 118156.

    Research output: Contribution to journal › Article › Research › peer-review

  29. E-pub ahead of print

    Plasticity and brittleness of the ordered βo phase in a TNM-TiAl alloy

    Molénat, G., Galy, B., Musi, M., Toualbi, L., Thomas, M., Clemens, H., Monchoux, J.-P. & Couret, A., 6 Sept 2022, (E-pub ahead of print) In: Intermetallics. 151.2022, December, 11 p., 107653.

    Research output: Contribution to journal › Article › Research › peer-review

  30. E-pub ahead of print

    On the energetics of the cubic-to-hexagonal transformations in TiAl+Mo alloys

    Abdoshahi, N., Dehghani, M., Ruban, A. V., Friák, M., Šob, M., Spitaler, J. & Holec, D., 24 Aug 2022, (E-pub ahead of print) In: Acta materialia. 240.2022, November, p. 118268 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Experimental Investigation of Phase Equilibria in the Ti—Al—Zr System at 1000–1300 °C

    Kahrobaee, Z., Rashkova, B., Hauschildt, K. & Palm, M., 23 Aug 2022, In: Crystals. 12.2022, 9, 17 p., 1184.

    Research output: Contribution to journal › Article › Research › peer-review

  32. E-pub ahead of print

    In-situ high-temperature EBSD characterization during a solution heat treatment of hot-rolled Ti-6Al-4V

    Janda, A., Ebenbauer, S., Prestl, A., Siller, I., Clemens, H. & Spörk-Erdely, P., 8 Aug 2022, (E-pub ahead of print) In: Materials characterization. 192.2022, October, 12 p., 112207.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Influence of Hatch Strategy on Crystallographic Texture Evolution, Mechanical Anisotropy of Laserbeam Powder Bed Fused S316L Steel

    Bodner, S., Hlushko, K., Kutleša, K., Todt, J., Renk, O., Meindlhumer, M., Resch, F., Nielsen, M.-A., Keckes, J. & Eckert, J., 2 Aug 2022, In: Advanced engineering materials. 2022, 25 p., 2200524.

    Research output: Contribution to journal › Article › Research › peer-review

  34. E-pub ahead of print

    Residual stress distribution of a locally and inductively quenched and tempered 50CrMo4 steel analysed by synchrotron transmission techniques

    Jászfi, V., Prevedel, P., Raninger, P., Todt, J., Mevec, D., Godai, Y., Maawad, E. & Ebner, R., 16 Jul 2022, (E-pub ahead of print) In: Materials & design. 221.2022, September, 9 p., 110936.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Effect of post weld heat treatment on the interplay of microstructure, precipitates and properties of creep-resistant 2.25Cr-1Mo-0.25V weld metal

    Fleißner-Rieger, H., Musi, M., Albu, M., Krein, R. & Schnitzer, R., 5 Jul 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 850.2022, 11 August, 11 p., 143550.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Phase equilibria in the Ti-rich part of the Ti-Al-Nb system: Part I: Low-Temperature Phase Equilibria Between 700 and 900 °C

    Distl, B., Hauschildt, K., Rashkova, B., Pyczak, F. & Stein, F., 1 Jul 2022, In: Journal of phase equilibria and diffusion. 43.2022, June, p. 355-381 27 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    How Si affects the microstructural evolution and phase transformations of intermetallic 𝛾-TiAl based alloys

    Musi, M., Galy, B., Stark, A., Schell, N., Hantcherli, M., Monchoux, J.-P., Couret, A., Clemens, H. & Spörk-Erdely, P., 12 Jun 2022, In: Materialia. 24.2022, August, 11 p., 101475.

    Research output: Contribution to journal › Article › Research › peer-review

  38. E-pub ahead of print

    Revealing dynamic processes in laser powder bed fusion with in situ X-ray diffraction at PETRA III

    Krohmer, E., Schmeiser, F., Wahlmann, B., Rosigkeit, J., Graf, G., Spörk-Erdely, P., Clemens, H., Staron, P., Körner, C., Reimers, W. & Uhlmann, E., 10 Jun 2022, (E-pub ahead of print) In: Review of scientific instruments. 93.2022, 6, 14 p., 065104.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    W 4f electron binding energies in amorphous W-B-C systems

    Ženíšek, J., Ondračka, P., Čechal, J., Souček, P., Holec, D. & Vašina, P., 1 Jun 2022, In: Applied surface science. 586.2022, 1 June, 9 p., 152824.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    30 years of Oliver–Pharr: Then, now and the future of nanoindentation

    Maier-Kiener, V., Lawrence, S. K. & Merle, B., Jun 2022, In: JOM. 74.2022, 6, p. 2177-2178 2 p.

    Research output: Contribution to journal › Editorial › peer-review

  41. Published

    Microstructure Evolution of a New Precipitation-Strengthened Fe–Al–Ni–Ti Alloy down to Atomic Scale

    Godor, F. R., Palm, M., Liebscher, C., Stein, F., Turk, C., Leitner, K., Rashkova, B. & Clemens, H., 26 May 2022, In: Metals : open access journal . 12.2022, 6, 16 p., 906.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Probing the charge transfer and electron–hole asymmetry in graphene–graphene quantum dot heterostructure

    Roy, R., Holec, D., Kratzer, M., Münzer, P., Kaushik, P., Michal, L., Kumar, G. S., Zajíčková, L. & Teichert, C., 20 May 2022, In: Nanotechnology. 33.2022, 32, 9 p., 325704.

    Research output: Contribution to journal › Article › Research › peer-review

  43. E-pub ahead of print

    Influence of matrix composition and MC carbide content on damage behaviour of TiN-coated high speed steel due to cyclic shear and compression load

    Gsellmann, M., Klünsner, T., Mitterer, C., Marsoner, S., Leitner, H., Boumpakis, A., Skordaris, G., Maier-Kiener, V. & Ressel, G., 16 May 2022, (E-pub ahead of print) In: Surface & coatings technology. 442.2022, 25 July, 8 p., 128546.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    The influence of chemistry on the interface toughness in a WTi-Cu system

    Alfreider, M., Bodlos, R., Romaner, L. & Kiener, D., 15 May 2022, In: Acta Materialia. 230.2022, 15 May, 13 p., 117813.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Ca solubility in a BiFeO3‑based system with a secondary Bi2O3 phase on a nanoscale

    Haselmann, U., Radlinger, T., Pei, W., Popov, M. N., Spitaler, T., Romaner, L., Ivanov, Y. P., Chen, J., He, Y., Kothleitner, G. & Zhang, Z., 21 Apr 2022, In: Journal of physical chemistry C (C, Nanomaterials and interfaces). 126.2022, 17, p. 7696-7703 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. E-pub ahead of print

    Tuning mechanical properties of ultrafine-grained tungsten by manipulating grain boundary chemistry

    Wurmshuber, M., Jakob, S., Doppermann, S., Wurster, S., Bodlos, R., Romaner, L., Maier-Kiener, V. & Kiener, D., 19 Apr 2022, (E-pub ahead of print) In: Acta materialia. 232.2022, 15 June, 13 p., 117939.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    The Phase Transformation of Silicon Assessed by an Unloading Contact Pressure Approach

    Schaffar, G. J. K., Kappacher, J., Tscharnuter, D. & Maier-Kiener, V., 18 Apr 2022, In: JOM. 74.2022, 6, p. 2220-2230 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Graphene on silicon: Effects of the silicon surface orientation on the work function and carrier density of graphene

    Sun, Y., Holec, D., Gehringer, D., Li, L., Fenwick, O., Dunstan, D. J. & Humphreys, C. J., 13 Apr 2022, In: Physical review : B, Condensed matter and materials physics. 105.2022, 16, 8 p., 165416.

    Research output: Contribution to journal › Article › Research › peer-review

  49. E-pub ahead of print

    Heavy-element-alloying for toughness enhancement of hard nitrides on the example Ti-W-N

    Buchinger, J., Koutná, N., Kirnbauer, A., Holec, D. & Mayrhofer, P. H., 2 Apr 2022, (E-pub ahead of print) In: Acta materialia. 231.2022, 1 June, 12 p., 117897.

    Research output: Contribution to journal › Article › Research › peer-review

  50. E-pub ahead of print

    The segregation of transition metals to iron grain boundaries and their effects on cohesion

    Mai, H. L., Cui, X.-Y., Scheiber, D., Romaner, L. & Ringer, S. P., 2 Apr 2022, (E-pub ahead of print) In: Acta materialia. 231.2022, 1 June, 18 p., 117902.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Erratum to “Energetic balance and kinetics for the decomposition of supersaturated Ti1-xAlxN” [Acta Materialia 55 (2007) 1441–1446]

    Mayrhofer, P. H., Fischer, F.-D., Böhm, H. J., Mitterer, C. & Schneider, J. M., 1 Apr 2022, In: Acta Materialia. 227.2022, 1 April, 1 p., 117741.

    Research output: Contribution to journal › Letter › peer-review

  52. Published

    Quench rate sensitivity of age-hardenable Al-Zn-Mg-Cu alloys with respect to the Zn/Mg ratio: An in situ SAXS and HEXRD study

    Graf, G., Spörk-Erdely, P., Staron, P., Stark, A., Mendez Martin, F., Clemens, H. & Klein, T., 1 Apr 2022, In: Acta materialia. 227.2022, 1 April, 12 p., 117727.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...44 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben