Chair of Physical Metallurgy (420)

Organisational unit: Chair

901 - 950 out of 2,174Page size: 50

Research output

  1. 2014
  2. Published

    Composition induced changes in optical response of Si-doped titanium dioxide

    Ondracka, P., Holec, D., Franta, D., Kedronova, E., Elisabeth, S., Goullet, A. & Zajickkova, L., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  3. Published

    Computational Materials Science

    Holec, D., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Computational simulation of instability phenomena in nanoparticles and nanofilms

    Todt, M., Toth, F., Hartmann, M., Holec, D., Cordill, M. J., Fischer, F. D. & Rammerstorfer, F. G., 2014, In: Computational Technology Reviews. 10, p. 89-119

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Constitutive analysis and microstructure evolution of the high-temperature deformation behavior of an advanced intermetallic multi-phase gamma-TiAl-based alloy

    Werner, R., Schwaighofer, E., Schloffer, M., Clemens, H., Lindemann, J. & Mayer, S., 2014, Advanced Materials Research. p. 807-812

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Constitutive analysis of the flow curve behavior of an intermetallic beta-solidifying gamma-TiAl-based alloy and microstructural characterization of the deformed state

    Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    Constitutive analysis of the flow curve behavior of an intermetallic beta-solidifying gamma-TiAl-based alloy and microstructural characterization of the deformed state

    Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 286-288

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Cu diffusion into single-crystalline TiN studied by transmission electron microscopy and atom probe tomography

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Schalk, N., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  9. Published

    Das Ausscheidungsverhalten von Bor im Vergütungsstahl 42CrMo4

    Lorenz, R., 2014

    Research output: Thesis › Diploma Thesis

  10. Published

    Development status, applications and perspectives of advanced intermetallic titanium aluminides

    Clemens, H. & Mayer, S., 2014, Materials Science Forum. p. 15-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Die Rolle der Metallographie bei Entwicklung und Charakterisierung von Hochleistungswerkstoffen

    Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2014, Sonderbände der Praktischen Metallographie 46. p. 3-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Die Wirkung von Bor im Vergütungsstahl 42CrMo4

    Haslberger, P., 2014

    Research output: Thesis › Diploma Thesis

  13. Published

    Diffusion studies in epitaxial TiN/Cu layers on MgO(001) by high resolution TEM and APT

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Schalk, N., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    Distribution of alloying elements within the constituent phases of a C-containing gamma-TiAl based alloy studied by atom probe tomography: Mater. Res. Soc. Symp. Proc. Vol.1760 2014 Materials Research Society

    Klein, T., Mendez Martin, F., Schachermayer, M., Rashkova, B., Clemens, H. & Mayer, S., 2014

    Research output: Non-textual form › Web publication/site › Research

  15. Published

    Early stages of precipitation: Experiments and Modelling

    Primig, S., Leitner, H. & Kozeschnik, E., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 5-11

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    EBSD study of the microstructural evolution during hot compression testing of a superduplex steel

    Primig, S., Ragger, K. & Buchmayr, B., 2014, EBSD study of the microstructural evolution during hot compression testing of a superduplex stee. p. 973-979

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    EBSD Untersuchungen an warmumgeformtem Superduplexstahl

    Primig, S., Ragger, K. & Buchmayr, B., 2014, 14. Int. Metallographie-Tagung. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    EBSD Untersuchungen von warmumgeformten Superduplexstahl

    Primig, S., Ragger, K., Clemens, H. & Buchmayr, B., 2014, Sonderbände der Praktischen Metallographie 46. p. 107-112

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Effect of carbon addition on solidification behavior, phase evolution and creep properties of an intermetallic beta-stabilized gamma-TiAl based alloy

    Schwaighofer, E., Rashkova, B., Clemens, H., Stark, A. & Mayer, S., 2014, In: Intermetallics. 46, p. 173-184

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Einfluss der diskontinuierlichen Ausscheidung auf das Kriechverhalten einer beta-erstarrenden gamma-TiAl-Basislegierung

    Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 189-194

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Einfluss der diskontinuierlichen Ausscheidung auf das Kriechverhalten einer β-erstarrenden γ-TiAl-Basislegierung

    Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2014, p. 189-194.

    Research output: Contribution to conference › Presentation › Research › peer-review

  22. Published

    Einfluss der Mikrolegierung (Nb, Al, N) auf die Feinkornbeständigkeit von Einsatzstählen vom Typ 18CrNiMo7-6

    Zacharias, H., Arndt, J. & Primig, S., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 296-297

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Einfluss der Mikrolegierung (Nb, Al, N) auf die Feinkornbeständigkeit von Einsatzstählen vom Typ 18CrNiMo7-6

    Zacharias, H., Arndt, J. & Primig, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Einfluss der Mikrolegierung (Nb, Al, N) auf die Feinkornbeständigkeit von Einsatzstählen vom Typ 18CrNiMo7-6

    Zacharias, H., 2014

    Research output: Thesis › Diploma Thesis

  25. Published

    Einfluss der Präparationstechnik bei der Bestimmung des µ-Phasenanteils in einer Fe-25Co-15Mo Legierung mittels XRD

    Turk, C., Kellezi, G., Leitner, H., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 101-106

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Einfluss der Präparationstechnik bei der Bestimmung des µ-Phasenanteils in einer Fe-25Co-15Mo Legierung mittels XRD

    Turk, C., Kellezi, G., Leitner, H., Clemens, H. & Primig, S., 2014, p. 101-106.

    Research output: Contribution to conference › Presentation › Research › peer-review

  27. Published

    Einfluss der pulvermetallurgischen Herstellung auf Gefüge und Eigenschaften intermetallischer Titanaluminid-Legierungen

    Gruber, M., 2014

    Research output: Thesis › Diploma Thesis

  28. Published

    Einsatz einer intermetallischen TiAl-Legierung als Turbinenradwerkstoff im Abgasturbolader für Dieselmotoren

    Themeßl, A., 2014

    Research output: Thesis › Diploma Thesis

  29. Published

    Elektrolytisches Polieren vs. Vibrationspolieren: Entwicklung einer Präparationsmethode zur EBSD-Analyse der Mo-Basislegierung MHC

    Lang, D., Schatte, J., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 59-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Entwicklung einer hochfesten und kriechresistenten γ-TiAl Basislegierung für Strahltriebwerkskomponenten

    Schwaighofer, E., 2014

    Research output: Thesis › Doctoral Thesis

  31. Published

    Evolution of precipitates and martensitic substructure during continuous heat treatment

    Mayer, W., Sackl, S. C., Shan, Y. V., Primig, S. & Kozeschnik, E., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Evolution of the omega-phase in a beta-stabilized multi-phase TiAl alloy and its effect on the hardness

    Rashkova, B., Schloffer, M., Schöberl, T., Schwaighofer, E., Zhang, Z., Mayer, S. & Clemens, H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Evolution of the ordered omega phase in a beta-stabilized multi-phase TiAl alloy and its effect on hardness

    Schloffer, M., Rashkova, B., Schöberl, T., Schwaighofer, E., Zhang, Z., Clemens, H. & Mayer, S., 2014, In: Acta materialia. 64, p. 241-252

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Evolution of the ω-Phase in a β-stabilized multi-phase TiAl alloy and ist effect on the hardness

    Rashkova, B., Schloffer, M., Schöberl, T., Zhang, Z., Mayer, S. & Clemens, H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. Published

    First principles study on the impact of chemical disorder and Mo alloying on stability of the cubic b/bo phase in TiAl

    Holec, D., Legut, D., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  36. Published

    Fortschritte in der Metallographie 46

    Mayer, S. (Editor), Panzenböck, M. (Editor) & Clemens, H. (Editor), 2014, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  37. Published

    Fracture and R-curve behavior of an intermetallic β-stabilized TiAl alloy with different nearly lamellar microstructures

    Leitner, T., Schloffer, M., Mayer, S., Eßlinger, J., Clemens, H. & Pippan, R., 2014, In: Intermetallics. 53, p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Gefügecharakterisierung intermetallischer gamma-TiAl-Legierungen nach Hochtemperaturverformung

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 113-118

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Gefügecharakterisierung intermetallischer γ-TiAl-Legierungen nach Hochtemperaturverformung

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014, p. 113-118.

    Research output: Contribution to conference › Presentation › Research › peer-review

  40. Published

    High Performance Materials

    Clemens, H., Primig, S., Mendez Martin, F., Babinsky, K., Hofer, C., Lang, D., Sackl, S. C., Turk, C. & Weißensteiner, I., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    High-rate deposition of AlTiN and related coatings with dense morphology by central cylindrical direct current magnetron sputtering

    Jilek, Jr., M., Jilek,, M., Mendez Martin, F., Mayrhofer, P. H. & Veprek, S., 2014, In: Thin solid films. 556, p. 361-368

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    High-temperature oxidation behavior of multi-phase Mo-containing gamma-TiAl-based alloys

    Pflumm, R., Donchev, A., Mayer, S., Clemens, H. & Schütze, M., 2014, In: Intermetallics. 53, p. 45-55

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Hochtemperaturbeständigkeit und Schweißeignung einer intermetallischen TiAl-Legierung für die Anwendung als Turbinenrad im Abgasturbolader

    Samer, L., 2014

    Research output: Thesis › Diploma Thesis

  44. Published

    Hochtemperatur Laser-Scanning Konfokal-Mikroskopie zur in-situ Untersuchung von Kornwachstum und Phasenumwandlungen in intermetallischen gamma-TiAl Legierungen

    Klein, T., Niknafs, S., Dippenaar, R., Clemens, H. & Mayer, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 195-200

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Hot-working behavior of an advanced intermetallic multi-phase gamma-TiAl based alloy

    Schwaighofer, E., Clemens, H., Lindemann, J., Stark, A. & Mayer, S., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 614, p. 297-310

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Impact of point defects on stability of (Al1-xCrx)2O3 phases from first principles

    Koller, C., Ramm, J., Polcik, P., Holec, D., Paulitsch, J. & Mayrhofer, P. H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Induction hardening vs conventional hardening of a heat treatable steel

    Sackl, S. C., Leitner, H., Zuber, M., Clemens, H. & Primig, S., 2014, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45A, p. 5657-5666

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Influence of deformation on the precipitation behavior of Nb (CN) in austenite and ferrite

    Nöhrer, M., Mayer, W., Primig, S., Zamberger, S., Kozeschnik, E. & Leitner, H., 2014, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45 A, p. 4210-4219

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Influence of heat treatment on the microstructural evolution of Al-3 wt.% Cu during high-pressure torsion

    Hohenwarter, A., Faller, M., Rashkova, B. & Pippan, R., 2014, In: Philosophical magazine : Letters. 94, p. 342-350

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Influence of microstructure on diffusion barrier properties of TiN investigated by TEM and APT

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Lu, J., Schalk, N., Lars, H. & Mitterer, C., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  51. Published

    In-situ high-energy X-ray diffraction on an intermetallic β-stabilised γ-TiAl alloy

    Erdely, P., 2014

    Research output: Thesis › Diploma Thesis

Previous 1...15 16 17 18 19 20 21 22 ...44 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben