Chair of Physical Metallurgy (420)

Organisational unit: Chair

601 - 650 out of 2,174Page size: 50

Research output

  1. 2016
  2. Published

    Nanoporous graphene derived by plasma processing: Properties towards hydrogen adsorption and selective carbon dioxide/methan gas separation

    Kostoglou, N., Tian, M., Holyfield, L., Ting, V., Mays, T., Tampaxis, C., Steriotis, T., Polychronopoulou, K., Walters, I., Mitterer, C. & Rebholz, C., 13 Sept 2016.

    Research output: Contribution to conference › Poster › Research

  3. Published

    Advancement of Compositional and Microstructural Design of Intermetallic γ-TiAl Based Alloys Determined by Atom Probe Tomography

    Klein, T., Clemens, H. & Mayer, S., 6 Sept 2016, In: Materials. 9.2016, 9, p. 755-774 20 p., 755.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Application of first principles methods in developments of novel intermetallic alloys

    Holec, D., 29 Aug 2016.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    Phase decomposition of a nanocrystalline AlNbTiV high-entropy alloy

    Schuh, B., Völker, B., Todt, J., Hohenwarter, A., Maier-Kiener, V. & Li, J., 5 Aug 2016.

    Research output: Contribution to conference › Presentation › Research

  6. Published

    Strain-rate sensitivity of ultrafine-grained materials and composites

    Kiener, D., Leitner, A. & Maier-Kiener, V., 4 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  7. Published

    Nanostructural Investigations on Potential Gas Shales of the Dniepr-Donets Basin (Ukraine)

    Misch, D., Klaver, J., Groß, D., Schmatz, J., Sachsenhofer, R. & Mendez Martin, F., 2 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  8. Published

    Nanostructural Investigations on Potential Gas Shales of the Dniepr-Donets Basin(Ukraine)

    Misch, D., Klaver, J., Groß, D., Schmatz, J., Sachsenhofer, R. & Mendez Martin, F., Jun 2016.

    Research output: Contribution to conference › Abstract › peer-review

  9. Published

    Deformation behaviour of BCC metals investigated by small- and macro-scale testing techniques

    Fritz, R., Wimler, D., Famelton, J., Leitner, A., Maier-Kiener, V. & Kiener, D., 31 May 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  10. E-pub ahead of print

    Fracture toughness enhancement of brittle nanostructured materials by spatial heterogeneity: A micromechanical proof for CrN/Cr and TiN/SiOx multilayers

    Daniel, R., Meindlhumer, M., Zalesak, J., Sartory, B., Zeilinger, A., Mitterer, C. & Keckes, J., 13 May 2016, (E-pub ahead of print) In: Materials & design. 104.2016, 15 August, p. 227-234 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Induction Tempering vs Conventional Tempering of a Heat-Treatable Steel

    Sackl, S. C., Zuber, C., Clemens, H. & Primig, S., 3 May 2016, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 47.2016, July, p. 3694-3703 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Phase Characterization of a Biocompatible Co-Cr-W Alloy by means of Correlative Microscopy

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 28 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  13. Published

    Transmission Kikuchi Diffraction: A technique to support the atom probe specimen preparation

    Babinsky, K., Primig, S. & Clemens, H., 28 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  14. Published

    Influence of varying nitrogen partial pressures on microstructure, mechanical and optical properties of sputtered TiAlON coatings

    Schalk, N., Simonet Fotso, J., Holec, D., Fian, A., Jakopic, G., Terziyska, V., Daniel, R. & Mitterer, C., 27 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  15. Published

    International Conference on Materials, Processing and Product Engineering 2015 (MPPE2015)

    Eck, S., Ludwig, A. & Ebner, R., 14 Apr 2016, In: IOP Conference Series: Materials Science and Engineering. 119.2016, 1, 2 p., 011001.

    Research output: Contribution to journal › Editorial › peer-review

  16. Published

    Textur- und Gefügeentwicklung in warmgewalzten und wärmebehandelten TNM-Blechen

    Erdely, P., Staron, P., Maawad, E., Schell, N., Bartels, A., Güther, V., Rothe, C., Klose, J., Mayer, S. & Clemens, H., 13 Apr 2016, p. 1-13.

    Research output: Contribution to conference › Presentation › Research

  17. Published

    Deformation Characteristics of Ultra-fine Grained BCC Metals at Ambient and Elevated Temperatures

    Kiener, D., Fritz, R., Wimler, D., Leitner, A. & Maier-Kiener, V., 12 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  18. Published

    Designkriterien für kriechfeste Titanaluminid-Legierungen

    Clemens, H. & Mayer, S., 12 Apr 2016, p. 1-18.

    Research output: Contribution to conference › Presentation › Research

  19. Published

    Korngrenzen in technisch reinem Molybdän: Eine atomare Untersuchung mittels Atomsondentomographie

    Babinsky, K., Primig, S., Knabl, W., Lorich, A., Clemens, H. & Sackl, S. C., 12 Apr 2016, p. 1-15. 15 p.

    Research output: Contribution to conference › Presentation › Research

  20. Published

    Size-dependent surface energies of Au nanoparticles

    Holec, D., Dumitraschkewitz, P., Fischer, F. D. & Vollath, D., 11 Apr 2016, p. 1-13. 13 p.

    Research output: Contribution to conference › Presentation › Research

  21. E-pub ahead of print

    Comparison of intergranular strain formation of conventional and newly developed nickel based superalloys

    Wagner, J., Hofmann, M., Van Petegem, S., Krempaszky, C., Hoelzel, M. & Stockinger, M., 15 Mar 2016, (E-pub ahead of print) In: Materials Science and Engineering A. 662.2016, 26 April, p. 303-307 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    In-situ Observation of Cross- Sectional Microstructural Changes and Stress Distributions in Fracturing TiN Thin Film during Nanoindentation

    Zeilinger, A., Todt, J., Krywka, C., Müller, M., Ecker, W., Sartory, B., Meindlhumer, M., Stefenelli, M., Daniel, R., Mitterer, C. & Keckes, J., 7 Mar 2016, In: Scientific reports (London : Nature Publishing Group). 6:22670, p. 1-14 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Influence of alloying elements on the mechanical properties of ultra-high strength weld metal 

    Schnitzer, R., Zügner, D., Haslberger, P., Ernst, W. & Kozeschnnik, E., 1 Mar 2016.

    Research output: Contribution to conference › Presentation › Research

  24. Published

    MATERIAL FOR A GAS TURBINE COMPONENT, METHOD FOR PRODUCING A GAS TURBINE COMPONENT AND GAS TURBINE COMPONENT

    Smarsly, W. (Inventor), Clemens, H. (Inventor), Guether, V. (Inventor), Kremmer, S. (Inventor), Otto, A. (Inventor) & Chladil, H. (Inventor), 29 Feb 2016, IPC No. C22F 1/ 18 A I, Patent No. PL2227571T, Priority date 18 Oct 2008, Priority No. EP20080841961

    Research output: Patent

  25. Published

    TiN diffusion barrier failure by the formation of Cu3Si investigated by electron microscopy and atom probe tomography

    Mühlbacher, M., Greczynski, G., Sartory, B., Mendez Martin, F., Schalk, N., Lu, J., Hultman, L. & Mitterer, C., 19 Feb 2016, In: Journal of Vacuum Science and Technology B, JVSTB. 34.2016, 2, p. 1-8 8 p., 022202.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Small scale deformation behavior of Au – influence of microstructure and temperature

    Maier-Kiener, V., Kiener, D., Leitner, A. & Pippan, R., 18 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  27. Published

    In-situ investigation of rate dependent material properties under non-ambient conditions: Challenges, limitations & insights

    Fritz, R., Wimler, D., Leitner, A., Maier-Kiener, V. & Kiener, D., 16 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    Microstructural stability of a single-phase nanocrystalline CoCrFeMnNi high-entropy alloy

    Schuh, B., Hohenwarter, A., Maier-Kiener, V., Clemens, H., Völker, B., Mendez Martin, F. & George, E., 15 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  29. Published

    Thermally Activated Deformation Processes in Body-Centered Cubic Cr – How Microstructure Influences Strain-Rate Sensitivity

    Maier-Kiener, V., Kiener, D., Pippan, R. & Hohenwarter, A., 15 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  30. Published

    Microstrucural Investigations of a nanocrystalline CoCrNi alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Völker, B. & Maier-Kiener, V., 6 Feb 2016.

    Research output: Contribution to conference › Poster › Research

  31. Published

    In Situ Characterization Techniques Based on Synchrotron Radiation and Neutrons Applied for the Development of an Engineering Intermetallic Titanium Aluminide Alloy

    Erdely, P., Schmoelzer, T., Schwaighofer, E., Clemens, H., Staron, P., Stark, A., Liss, K.-D. & Mayer, S., 4 Jan 2016, In: Metals : open access journal . 6.2016, 1, p. 1-27 27 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    3D Atom Probe Characterisation of Passive Layers on Stainless Steels

    Mori, G., Visser, A., Turk, C., Mendez Martin, F., Kapp, M., Fluch, R. & Leitner, H., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  33. Published

    Accurate prediction of band gaps and optical properties of HfO2

    Ondracka, P., Holec, D., Necas, D. & Zajickkova, L., 2016, In: Journal of physics / D, Applied physics. 49, p. 395301-1 - 395301-8 8 p.

    Research output: Contribution to journal › Article › Research

  34. Published

    Advanced characterization methods for wear resistant hard coatings: A review on recent progress

    Tkadletz, M., Schalk, N., Daniel, R., Keckes, J., Czettl, C. & Mitterer, C., 2016, In: Surface & coatings technology. 285, p. 31-46 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Advanced Intermetallic Titanium Aluminides

    Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  36. Published

    Advanced Intermetallic Titanium Aluminides

    Clemens, H., Smarsly, W., Güther, V. & Mayer, S., 2016, 13th World Conference on Titanium. USA, p. 1189–1200 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Alloy Design Rules for Advanced Titanium Aluminides

    Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  38. Published

    Alloy Design Rules for Advanced Titanium Aluminides

    Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  39. Published

    Al-rich cubic Al0.8Ti0.2N coating with self-organized nano-lamellar microstructure: Thermal and mechanical properties

    Todt, J., Zalesak, J., Daniel, R., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Mitterer, C. & Keckes, J., 2016, In: Surface & coatings technology. 291, p. 89-93 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Analyse einer Co-Cr-W Legierung mittels korrelativer Mikroskopie und Nanoindentation

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 2016.

    Research output: Contribution to conference › Presentation › Research

  41. Published

    Anisotropic elastic properties and mechanical stability of S5(210) grain-boundary complexions in Ni3Al from ab initio calculations

    Friak, M., Vsianska, M., Holec, D. & Sob, M., 2016.

    Research output: Contribution to conference › Presentation › Research

  42. Published

    Applications of site-specific atom probe specimen preparation by focused ion beam and transmission Kikuchi diffraction

    Turk, C., Leitner, K., Lang, D., Haslberger, P., Hofer, C., Clemens, H. & Primig, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  43. Published

    Ausscheidungshärtbarer Schneidwerkstoff mit Hartphasen

    Turk, C., 2016

    Research output: Thesis › Doctoral Thesis

  44. Published

    Carbide precipitates in as-sintered and heat treated Ti-22Nb-(10Zr-xB) alloys processed by metal injection molding

    Ebner, S., 2016

    Research output: Thesis › Diploma Thesis

  45. Published

    Characterisation of advanced intermetallic titanium aluminide alloys by means of diffraction and scattering techniques

    Erdely, P., Mayer, S. & Clemens, H., 2016.

    Research output: Contribution to conference › Poster › Research

  46. Published

    Charakterisierung eines karbidfreien bainitischen Stahls der dritten Generation „Advanced High Strength Steels“

    Hofer, C., 2016

    Research output: Thesis › Doctoral Thesis

  47. Published

    Charakterisierung pulvermetallurgisch hergestellter Al-reicher Titanaluminid-Legierungen

    Jungbauer, M., 2016

    Research output: Thesis › Master's Thesis

  48. Published

    Combcrack Generation in PVD Coated Hardmetal Milling Inserts

    Teppernegg, T., 2016

    Research output: Thesis › Doctoral Thesis

  49. Published

    Combinatorial synthesis of Cr1−xAlxN and Ta1−xAlxN coatings using industrial scale co-sputtering

    Schalk, N., Weirather, T., Sabitzer, C., Hirn, S., Terziyska, V., Gangopadhyay, S., Czettl, C., Polcik, P., Kathrein, M. & Mitterer, C., 2016, In: Surface engineering. 32, 4, p. 252-257 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Combined experimental and theoretical study of facet-controlled phase separation in supersaturated Au-Ni nanoparticles upon shape equilibration

    Herz, A., Friak, M., Rossberg, D., Hentschel, M., Theska, F., Wang, D., Holec, D., Sob, M., Schneeweiss, O. & Schaaf, P., 2016.

    Research output: Contribution to conference › Presentation › Research

  51. Published

    Compositional trends in grain-boundary elasticity from ab initio calculations: case study of Σ5(210) Ni3(Al,Si)

    Friak, M., Vsianska, M., Holec, D., Zeleny, M. & Sob, M., 2016.

    Research output: Contribution to conference › Poster › Research

Previous 1...9 10 11 12 13 14 15 16 ...44 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben