Chair of Nonferrous Metallurgy (520)

Organisational unit: Chair

201 - 250 out of 2,400Page size: 50

Research output

  1. 2022
  2. Published

    CO2-Optimized Recovery of Special Metals from Precipitation Residue by Selective Chlorination

    Steinlechner, S. & Höber, L., 2022, Rare Metal Technology, 2022. Ouchi, T., Azimi, G., Forsberg, K., Kim, H., Alam, S., Neelameggham, N. R., Baba, A. A. & Peng, H. (eds.). p. 237-244 8 p. (Minerals, Metals and Materials Series; vol. Part F).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Desintegration von Hartmetallen mit Kornwachstumshemmern

    Luznik, L. T., 2022

    Research output: Thesis › Master's Thesis

  4. Published

    Determination of Antimony Saturation in Harris Slags

    Zummar Ghazaleh, S. J., 2022

    Research output: Thesis › Master's Thesis

  5. Published

    Efficient Steel Mill Dust Recycling—Aiming for Zero Waste

    Antrekowitsch, J. & Hanke, G., 2022, REWAS 2022: Developing Tomorrow’s Technical Cycles. Lazou, A., Daehn, K., Fleuriault, C., Gökelma, M., Olivetti, E. & Meskers, C. (eds.). p. 303-310 8 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Entwicklung eines sauren Laugungsverfahrens zur Behandlung von Elektrolyseausbruch aus der Primäraluminiumherstellung

    Hametner, F., 2022

    Research output: Thesis › Master's Thesis

  7. Published

    Evaluierung der Anwendbarkeit von KI-Software zur Entwicklung von recyclingtoleranten Aluminium-Legierungen

    Oberhumer, M., 2022

    Research output: Thesis › Master's Thesis

  8. Accepted/In press

    Fast differential scanning calorimetry to mimic additive manufacturing processing: specific heat capacity analysis of aluminium alloys

    Quick, C. R., Dumitraschkewitz, P., Schawe, J. E. K. & Pogatscher, S., 2022, (Accepted/In press) In: Journal of Thermal Analysis and Calorimetry. 148.2023, February, p. 651-662 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    High-resolution characterization of precipitates in multi-layer submerged-arc welded 2.25Cr-1Mo-0.25V steel

    Fleißner-Rieger, H., Kremmer, T., Brabetz, M., Krein, R., Pahr, H., Peruzzi, M. & Schnitzer, R., 2022, In: Materials Today Communications. 31.2022, June, 11 p., 103299.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Hydrometallurgical recycling of lithium-ion batteries in a secondary copper refinery

    Robles Martin, A., 2022

    Research output: Thesis › Master's Thesis

  11. Published

    Hydrometallurgische Rückgewinnung von Graphit aus Lithium-Ionen-Batterien mittels laugungsgestützter Flotation

    Kollmann, H., 2022

    Research output: Thesis › Master's Thesis

  12. Published

    Innovative Lösung für das Recycling hoch-zinkhaltiger Stahlwerksstäube

    Auer, M., 2022

    Research output: Thesis › Doctoral Thesis

  13. Published

    Kinetic Aspects of the Selective Reduction of Zinc Ferrite with H2 in the Processing of Electric Arc Furnace Dust

    Hoffelner, F., 2022

    Research output: Thesis › Master's Thesis

  14. Published

    Kupferrückgewinnung aus Abwässern der Leiterplattenindustrie mittels Ionenaustauschharzen

    Kern, K. W., 2022

    Research output: Thesis › Master's Thesis

  15. Published

    Maximizing the Efficiency of By-Product Treatment by Multi-metal Recovery and Slag Valorization

    Hanke, G., Antrekowitsch, J., Castro, F. & Krug, H., 2022, REWAS 2022: Developing Tomorrow’s Technical Cycles. Lazou, A., Daehn, K., Fleuriault, C., Gökelma, M., Olivetti, E. & Meskers, C. (eds.). p. 201-211 11 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Mineralische Nebenprodukte und Abfälle 9: Aschen, Schlacken, Stäube und Baurestmassen

    Thiel, S. (Co-editor), Thomé-Kozmiensky, E. (Editor), Senk, D. G. (Co-editor), Wotruba, H. (Co-editor), Antrekowitsch, H. (Co-editor) & Pomberger, R. (Co-editor), 2022, Neuruppin. 435 p.

    Research output: Book/Report › Anthology › Research

  17. Published

    Oxidationsverhalten von Al- und Mg-legierten Zinkschmelzen unter dynamischen Bedingungen

    Friedl, F., 2022

    Research output: Thesis › Master's Thesis

  18. Published

    Recycling of electric arc furnace dust with hydrogen

    Brandner, U., 2022

    Research output: Thesis › Doctoral Thesis

  19. Published

    Recyclingpotenzial von Chrommagnesiasteinen der Kupfersekundärindustrie

    Prietl, C. L., 2022

    Research output: Thesis › Master's Thesis

  20. Published

    Recycling von Hartmetallen unter Verwendung von gasförmigem Zink

    Leitner, M., 2022

    Research output: Thesis › Doctoral Thesis

  21. Published

    Rückgewinnung von kritischen Elementen aus Lithium-Eisenphosphat-Kathodenmaterial

    Lerchbammer, R., 2022

    Research output: Thesis › Master's Thesis

  22. Published

    Strategies for the amelioration of a TBZC intermediate product

    Weitbacher, M., 2022

    Research output: Thesis › Master's Thesis

  23. Published

    Untersuchung der Sequestrierfähigkeit von Kohlendioxid in industriellen Reststoffen

    Holzmann, L., 2022

    Research output: Thesis › Master's Thesis

  24. Published

    Verwertung von Schlacken aus dem Recycling metallurgischer Nebenprodukte

    Hanke, G. & Antrekowitsch, J., 2022, Mineralische Nebenprodukte und Abfälle 9. Vol. 9. p. 305-314 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. 2021
  26. E-pub ahead of print

    Recycling chains for lithium-ion batteries: A critical examination of current challenges, opportunities and process dependencies

    Windisch-Kern, S., Gerold, E., Nigl, T., Jandric, A., Altendorfer, M., Rutrecht, B., Scherhaufer, S., Raupenstrauch, H., Pomberger, R., Antrekowitsch, H. & Part, F., 6 Dec 2021, (E-pub ahead of print) In: Waste management. 138.2022, 1 February, p. 125-139 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Irradiation stability and induced ferromagnetism in a nanocrystalline CoCrCuFeNi highly-concentrated alloy

    Tunes, M. A., Greaves, G., Rack, P. D., Boldman, W. L., Schön, C. G., Pogatscher, S., Maloy, S. A., Zhang, Y. & El-Atwani, O., 3 Dec 2021, In: Nanoscale. 13.2021, 48, p. 20437-20450 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Potenzialabschätzung von Synergieeffekten zur simultanen Rückgewinnung von Wertmetallen aus komplexen, metallhaltigen Reststoffen

    Gerold, E. & Antrekowitsch, H., 25 Nov 2021, In: Österreichische Wasser- und Abfallwirtschaft : ÖWAW . 74.2022, February, p. 22-31 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Microstructure and mechanical properties of novel TiAl alloys tailored via phase and precipitate morphology

    Wimler, D., Lindemann, J., Kremmer, T., Clemens, H. & Mayer, S., Nov 2021, In: Intermetallics. 138.2021, November, 10 p., 107316.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Suitability of Self-Reducing and Slag-Forming Briquettes for Electric Arc Furnace Use Based on Laboratory Tests

    Abdelrahim, A., Aula, M., Iljana, M., Willms, T., Echterhof, T., Steinlechner, S., Mombelli, D., Mapelli, C., Omran, M., Preiss, S. & Fabritius, T., 26 Oct 2021, In: Steel research international.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Algorithmic Modelling of Advanced Chlorination Procedures for Multimetal Recovery

    Höber, L., Lerche, R. & Steinlechner, S., 8 Oct 2021, In: Metals. 11, 10, 11 p., 1595.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    A comprehensive review of processing strategies for iron precipitation residues from zinc hydrometallurgy

    Höber, L. & Steinlechner, S., Oct 2021, In: Cleaner Engineering and Technology. 4.2021, October, 12 p., 100214.

    Research output: Contribution to journal › Review article › peer-review

  33. Published

    A review on the fundamentals of hydrogen-based reduction and recycling concepts for electric arc furnace dust extended by a novel conceptualization

    Brandner, U., Antrekowitsch, J. & Leuchtenmüller, M., 8 Sept 2021, In: International Journal of Hydrogen Energy . 46.2021, 62, p. 31894-31902 9 p.

    Research output: Contribution to journal › Review article › peer-review

  34. Published

    Comparative Evaluation of Characterization Methods for Powders Used in Additive Manufacturing

    Mitterlehner, M., Danninger, H., Gierl-Mayer, C., Gschiel, H., Martinez, C., Tomisser, M., Schatz, M., Senck, S., Auer, J. & Benigni, C., Sept 2021, In: Journal of Materials Engineering and Performance. 30, 9, p. 7019-7034 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Lean Wrought Magnesium Alloys

    Papenberg, N. P., Gneiger, S., Uggowitzer, P. J. & Pogatscher, S., 31 Jul 2021, In: Materials. 14.2021, 15, 30 p., 4282.

    Research output: Contribution to journal › Review article › peer-review

  36. Published

    Separation and Efficient Recovery of Lithium from Spent Lithium-Ion Batteries

    Gerold, E., Luidold, S. & Antrekowitsch, H., 8 Jul 2021, In: Metals : open access journal . 11.2021, 7, 14 p., 1091.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Studies on the Formation and Processing of Aluminium Dross with Particular Focus on Special Metals

    Wibner, S., Antrekowitsch, H. & Meisel, T. C., Jul 2021, In: Metals. 11.2021, 7, 12 p., 1108.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Recycling of aluminium-containing residues

    Wibner, S. & Antrekowitsch, H., 30 Jun 2021.

    Research output: Contribution to conference › Paper › peer-review

  39. Published

    Influence of Fe and Mn on the Microstructure Formation in 5xxx Alloys—Part II: Evolution of Grain Size and Texture

    Grasserbauer, J., Weißensteiner, I., Falkinger, G., Uggowitzer, P. & Pogatscher, S., 15 Jun 2021, In: Materials. 14.2021, 12, 3312.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Enhanced aging kinetics in Al-Mg-Si alloys by up-quenching

    Schmid, F., Dumitraschkewitz, P., Kremmer, T., Uggowitzer, P., Tosone, R. & Pogatscher, S., 7 Jun 2021, In: Communications materials. p. 12 58.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Influence of Fe and Mn on the Microstructure Formation in 5xxx Alloys—Part I: Evolution of Primary and Secondary Phases

    Grasserbauer, J., Weißensteiner, I., Falkinger, G., Kremmer, T., Uggowitzer, P. & Pogatscher, S., 2 Jun 2021, In: Materials. 14.2021, 12, 3204.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    MUL 4.0 – Digitalisierung der Wertschöpfungskette vom Rohmaterial bis hin zum Recycling

    Woschank, M., Ralph, B. J., Kaiblinger, A., Miklautsch, P., Pacher, C., Sorger, M., Zsifkovits, H., Stockinger, M., Pogatscher, S., Antretter, T. & Antrekowitsch, H., 2 Jun 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 166, 6, p. 309-313

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Observations of crystal strains in filler and QI particles through TEM examination – Effect of processing and grain size

    Arregui-Mena, J. D., Worth, R. N., Tunes, M. & Edmondson, P. D., Jun 2021, In: Materials and Design. 204.2021, June, 7 p., 109673.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Irradiation stability and induced ferromagnetism in a nanocrystalline CoCrCuFeNi highly-concentrated alloy

    Tunes, M. A., El-Atwani, O., Greaves, G., Boldman, W., Rack, P., Schön, C., Pogatscher, S., Maloy, S. & Zhang, Y., 13 Apr 2021

    Research output: Other contribution › Research

  45. Published

    CO2-optimierte Rückgewinnung von Wertmetallen aus Fällungsrückständen der Zinkindustrie

    Höber, L., 12 Apr 2021.

    Research output: Contribution to conference › Poster › Research

  46. Published

    Crossover-Legierungen – Innovative Aluminiumwerkstoffe für nachhaltigen Leichtbau

    Stemper, L., 12 Apr 2021.

    Research output: Contribution to conference › Poster › Research

  47. E-pub ahead of print

    Two step-ageing of 7xxx series alloys with an intermediate warm-forming step

    Österreicher, J. A., Grabner, F., Tunes, M. A., Coradini, D. S. R., Pogatscher, S. & Schlögl, C. M., 21 Mar 2021, (E-pub ahead of print) In: Journal of Materials Research and Technology. 12.2021, May-June, p. 1508-1515 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Recycling von minderwertigen Aluminiumschrotten

    Wibner, S. & Antrekowitsch, H., 4 Mar 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 3, p. 131-136 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Giant hardening response in AlMgZn(Cu) alloys

    Stemper, L., Tunes, M. A., Dumitraschkewitz, P., Mendez Martin, F., Tosone, R., Marchand, D., Curtin, W. A., Uggowitzer, P. & Pogatscher, S., 1 Mar 2021, In: Acta Materialia. 206.2021, March, 19 p., 116617.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Deviating from the pure MAX phase concept: Radiation-tolerant nanostructured dual-phase Cr2AlC

    Tunes, M. A., Imtyazuddin, M., Kainz, C., Pogatscher, S. & Vishnyakov, V. M., Mar 2021, In: Science Advances. 7, 13, p. 1-12 eabf6771.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Synergistic alloy design concept for new high-strength Al–Mg–Si thick plate alloys

    Schmid, F., Weißensteiner, I., Tunes, M. A., Kremmer, T., Ebner, T., Morak, R., Uggowitzer, P. J. & Pogatscher, S., Mar 2021, In: Materialia. 15, 13 p., 100997.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    A Fast and Implantation-Free Sample Production Method for Large Scale Electron-Transparent Metallic Samples Destined for MEMS-Based In Situ S/TEM Experiments

    Tunes, M. A., Quick, C., Stemper, L., Santa Rosa Coradini, D., Grasserbauer, J., Dumitraschkewitz, P., Kremmer, T. & Pogatscher, S., 26 Feb 2021, In: Materials. 14.2021, 5, p. 1-9 9 p., 1085.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...48 Next
View graph of relations

Contact information

Erzherzog-Johann-Straße 3/II, 8700 Leoben
  • Main phone number: +43 3842 402 5201 oder 5204