Chair of Nonferrous Metallurgy (520)

Organisational unit: Chair

151 - 200 out of 2,400Page size: 50

Research output

  1. 2023
  2. Published

    Neues aus dem Recycling von Lithium-Ionen-Batterien

    Rutrecht, B., Rutkowski, C., Gerold, E., Wiszniewski, L., Nigl, T. & Pomberger, R., 2023, Die neue EU-Batterieverordnung.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Nickelrückgewinnung aus Abwässern der Mikroelektronikindustrie

    Pichlhöfer, V., 2023

    Research output: Thesis › Master's Thesis

  4. Published

    Prozessentwicklung für den Zentrifugalguss von Ti 6Al 4V sowie dessen Interaktion mit CaZrO3 in Tiegel und Formschale

    König, F. R., 2023

    Research output: Thesis › Master's Thesis

  5. Published

    Recycling of Rare Earth Elements by Smelting of RE-Bearing Raw Materials

    Minwal, W. P., 2023

    Research output: Thesis › Doctoral Thesis

  6. Published

    Selective chlorination and extraction of valuable elements from thermally treated iron precipitation residues of the zinc and nickel industry

    Witt, K., 2023

    Research output: Thesis › Master's Thesis

  7. Published

    Selective Chlorination as an Innovative Extraction Method for Valuable Metals from Iron Containing Matrix

    Steinlechner, S., Höber, L. & Witt, K., 2023, New Directions in Mineral Processing, Extractive Metallurgy, Recycling and Waste Minimization - An EPD Symposium in Honor of Patrick R. Taylor. Reddy, R. G., Anderson, A., Anderson, C. G., Spiller, E. D., Fleuriault, C., Strauss, M., Vidal, E. E. & Zhang, M. (eds.). p. 65-76 12 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    The behavior of minor metals in BOF slag with the addition of Al2O3and TiO2

    Haslinger, G. & Steinlechner, S., 2023, Proceedings - European Metallurgical Conference, EMC 2023. p. 965-973 9 p. (Proceedings - European Metallurgical Conference, EMC 2023; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Untersuchung des Oxidationsverhaltens von Aluminiumlegierungsschmelzen unter verschiedenen Atmosphären

    Doppermann, S., 2023

    Research output: Thesis › Master's Thesis

  10. 2022
  11. Published

    Forging of an age-hardenable Mg–Al–Ca–Mn–Zn alloy on industrial scale

    Papenberg, N. P., Hatzenbichler, T., Grabner, F., Uggowitzer, P. & Pogatscher, S., 12 Dec 2022, In: SN applied sciences . 5.2023, 1, 11 p., 14.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Bericht zur Analyse unterschiedlicher Metallfraktionen

    Wibner, S. & Antrekowitsch, H., Dec 2022

    Research output: Book/Report › Commissioned report › Research

  13. Published

    Besprechungsbericht zur Verarbeitung der aluminiumhaltigen Fraktion aus der Krätzerückstandsdeponie N6 bei der Fa. Confal

    Wibner, S., Antrekowitsch, H. & Sprung, A., Dec 2022

    Research output: Book/Report › Commissioned report › Research

  14. E-pub ahead of print

    An improved process scan strategy to obtain high-performance fatigue properties for Scalmalloy®

    Schimbäck, D., Mair, P., Kaserer, L., Perfler, L., Palm, F., Leichtfried, G. & Pogatscher, S., 22 Nov 2022, (E-pub ahead of print) In: Materials and Design. 224.2022, December, 11 p., 111410.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Cyclic voltammetric analysis of copper dissolution in acidic chloride electrolytes containing copper ions

    Körbler, N., Mori, G. K., Gerold, E., Antrekowitsch, H., Klocek, J. & Krivec, T., 14 Nov 2022. 18 p.

    Research output: Contribution to conference › Paper › peer-review

  16. Published

    Interrelationships between pre-processing and subsequent procedures in the recycling of LIBs

    Gerold, E. & Antrekowitsch, H., 9 Nov 2022, Recy&DepoTech 2022.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Closed die forging of a Mg-Al-Ca-Mn-Zn lean alloy

    Papenberg, N. P., Arnoldt, A., Trink, B., Uggowitzer, P. & Pogatscher, S., 1 Nov 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2022, 857, 22 p., 144079.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Accelerated radiation tolerance testing of Ti-based MAX phases

    Tunes, M., Drewry, S. M., Arregui-Mena, J. D., Picak, S., Greaves, G., Cattini, L., Pogatscher, S., Valdez, J. A., Fensin, S., El-Atwani, O., Donnelly, S. E., Saleh, T. A. & Edmondson, P. D., 28 Oct 2022, In: Materials Today Energy. 30.2022, December, 14 p., 101186.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    MEMS-Based in situ electron-microscopy investigation of rapid solidification and heat treatment on eutectic Al-Cu

    Dumitraschkewitz, P., Tunes, M., Quick, C. R., Santa Rosa Coradini, D., Kremmer, T., Ramasamy, P., Uggowitzer, P. & Pogatscher, S., 15 Oct 2022, In: Acta Materialia. 239.2022, 15 October, 9 p., 118225.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Parameter Study on the Recycling of LFP Cathode Material Using Hydrometallurgical Methods

    Gerold, E., Antrekowitsch, H. & Lerchbammer, R., 12 Oct 2022, In: Metals : open access journal . 12.2022, 10, 17 p., 1706.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Bestimmung des Aluminiuminhaltes von Krätzen der Vöcklabrucker Metallgießerei durch Schmelzen mit Salz im TBRC

    Wibner, S. & Antrekowitsch, H., Oct 2022

    Research output: Book/Report › Commissioned report › Research

  22. Published

    Formation of intermediate decomposition products during methane pyrolysis in a liquid metal bubble column reactor

    Neuschitzer, D., Antrekowitsch, H., Groß, D., Wibner, S. & Scheiblehner, D., 12 Sept 2022.

    Research output: Contribution to conference › Poster › Research

  23. Published

    Determination of technology-critical elements (TCEs)in plants by ICP-MS/MS

    Trimmel, S., Irrgeher, J., Prohaska, T., Lancaster, S., Meisel, T. C., Spörl, P., Lashin, N., Feiner, L., Feiner, M., Pitha, U., Wiedenhofer, D. & Haluza, D., 6 Sept 2022.

    Research output: Contribution to conference › Poster › Research

  24. Published

    Untersuchung von Krätzerückständen der Deponie N6

    Wibner, S. & Antrekowitsch, H., Sept 2022

    Research output: Book/Report › Commissioned report › Research

  25. Published

    Voltammetric investigations regarding the reaction and diffusion rates of copper in aqueous solutions

    Körbler, N., Ebner, T., Antrekowitsch, H., Krivec, T. & Klocek, J., Sept 2022, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 75.2022, 5, p. 251-257 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    A Sustainable Approach for the Recovery of Manganese from Spent Lithium-Ion Batteries via Photocatalytic Oxidation

    Gerold, E. & Antrekowitsch, H., 29 Aug 2022, In: International Journal of Materials Science and Applications. 11.2022, 3, p. 66-75 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. E-pub ahead of print

    Role of electronic energy loss on defect production and interface stability: Comparison between ceramic materials and high-entropy alloys

    Zhang, Y., Silva, C. M., Lach, T. G., Tunes, M., Zhou, Y., Nuckols, L., Boldman, W. L., Rack, P. D., Donnelly, S. E., Jiang, L., Wang, L. & Weber, W. J., 14 Aug 2022, (E-pub ahead of print) In: Current opinion in solid state & materials science. 26.2022, 4, 16 p., 101001.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Ce post-treatment for increased corrosion resistance of AA2024-T3 anodized in tartaric-sulfuric acid

    Prada Ramirez, O. M., Tunes, M. A., Mennucci, M. M., Starykevich, M., Neves, C., Ferreira, M. G. S., Pogatscher, S. & De Melo, H. G., 1 Aug 2022, In: Corrosion science. 204.2022, 1 August, p. 110371 17 p., 110371.

    Research output: Contribution to journal › Article › Research › peer-review

  29. E-pub ahead of print

    Precipitation in lean Mg–Zn–Ca alloys

    Schäublin, R. E., Becker, M., Cihova, M., Gerstl, S. S. A., Deiana, D., Hébert, C., Pogatscher, S., Uggowitzer, P. J. & Löffler, J. F., 30 Jul 2022, (E-pub ahead of print) In: Acta Materialia. 239.2022, 15 October, 19 p., 118223.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    High Fe content in Al-Mg-Si wrought alloys facilitates excellent mechanical properties

    Trink, B., Weißensteiner, I., Uggowitzer, P., Strobl, K. & Pogatscher, S., 1 Jul 2022, In: Scripta Materialia. 215, 6 p., 114701.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Materialanalysen unterschiedlicher Aluminiumprofile

    Wibner, S. & Antrekowitsch, H., Jul 2022

    Research output: Book/Report › Commissioned report › Research

  32. E-pub ahead of print

    The catalytic effect of the metal bath on the zinc oxide reduction

    Leuchtenmüller, M. & Brandner, U., 26 Jun 2022, (E-pub ahead of print) In: Results in Engineering. 16.2022, December, 5 p., 100514.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Mitigating the detrimental effects of galvanic corrosion by nanoscale composite architecture design

    Renk, O., Weißensteiner, I., Cihova, M., Steyskal, E.-M., Sommer, N., Tkadletz, M., Pogatscher, S., Schmutz, P., Eckert, J., Uggowitzer, P., Pippan, R. & Weinberg, A. M., 16 Jun 2022, In: npj Materials degradation. 47.2022, 6, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    FFG-Endbericht: Kleinprojekt, Untersuchung der Wirkung auf die Luftemissionen von Zeolith als Adsorbens im Filterprozess im Aluminiumschmelzwerk

    Wibner, S. & Antrekowitsch, H., Jun 2022

    Research output: Book/Report › Commissioned report › Research

  35. E-pub ahead of print

    Studies on the phase formation of cobalt contacted with zinc vapour

    Leitner, M., Winter, F., Gerold, E., Luidold, S., Storf, C., Czettl, C., Janka, L., Karhumaa, T. & Antrekowitsch, H., 22 Apr 2022, (E-pub ahead of print) In: International Journal of Refractory Metals and Hard Materials. 107.2022, September, 8 p., 105877.

    Research output: Contribution to journal › Article › Research › peer-review

  36. E-pub ahead of print

    Making sustainable aluminum by recycling scrap: The science of “dirty” alloys

    Raabe, D., Ponge, D., Uggowitzer, P. J., Roscher, M., Paolantonio, M., Liu, C., Antrekowitsch, H., Kozeschnik, E., Seidmann, D., Gault, B., De Geuser, F., Deschamps, A., Hutchinson, C., Liu, C., Li, Z., Prangnell, P., Robson, J., Shanthraj, P., Vakili, S. & Sinclair, C. & 2 others, Bourgeois, L. & Pogatscher, S., 7 Apr 2022, (E-pub ahead of print) In: Progress in materials science. 128.2022, July, 150 p., 100947.

    Research output: Contribution to journal › Review article › peer-review

  37. Published

    Selective Chlorination and Extraction of Valuable Metals from Iron Precipitation Residues

    Höber, L., Witt, K. & Steinlechner, S., 1 Apr 2022, In: Applied Sciences : open access journal. 12.2022, 7, 16 p., 3590.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    VERFAHREN ZUM ENTFERNEN VON FLÜCHTIGEN BESTANDTEILEN AUS EINEM INDUSTRIESTAUB, UND SOMIT GEWONNENES WERTSTOFF-HALTIGES PRODUKT

    Antrekowitsch, J. (Inventor), Steinlechner, S. (Inventor) & Auer, M. (Inventor), 17 Mar 2022, IPC No. C22B 19/ 38 A I, Patent No. WO2022053568, Priority date 11 Sept 2020, Priority No. EP20200195687

    Research output: Patent

  39. Published

    VERFAHREN ZUM ENTFERNEN VON FLÜCHTIGEN BESTANDTEILEN AUS EINEM INDUSTRIESTAUB, UND WERTSTOFF-HALTIGES PRODUKT

    Antrekowitsch, J. (Inventor), Steinlechner, S. (Inventor) & Auer, M. (Inventor), 16 Mar 2022, IPC No. C22B 19/ 38 A I, Patent No. EP3967412, Priority date 11 Sept 2020, Priority No. EP20200195687

    Research output: Patent

  40. Published

    A METHOD FOR SEPARATING ZINC FROM AN INDUSTRY PRODUCT USING A PYROMETALLURGICAL REACTION

    Leuchtenmüller, M. (Inventor) & Antrekowitsch, J. (Inventor), 24 Feb 2022, IPC No. C22B 19/ 30 A I, Patent No. WO2022037781, Priority date 20 Aug 2020, Priority No. WO2020EP73313

    Research output: Patent

  41. Published

    Strategies for the Upgrade of a TBZC Product (Tetra Basic Zinc Chloride) by Selective Removal of the Impurity Chlorine

    Höber, L., Mohamed Abdelmonnem Ahmed, R., Hofbauer, T. & Steinlechner, S., 7 Feb 2022, TMS 2022: 151st Annual Meeting and Exhibition Supplemental Proceedings. Vol. 151. p. 95-108 14 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Investigation of Melting Behavior and Viscosity of Slags from Secondary Ferromanganese Production

    Scheiblehner, D., Sagadin, C., Luidold, S., Antrekowitsch, H. & Offenthaler, D., 3 Feb 2022, Furnace Tapping, 2022. Steenkamp, J. D., Gregurek, D., Reynolds, Q. G., Alvear Flores, G., Joubert, H. & Mackey, P. J. (eds.). p. 311-324 14 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Biomass as a CO2-neutral carbon substitute for reduction processes in metallurgy

    Dornig, C. & Antrekowitsch, J., 2 Feb 2022, p. 635-646. 12 p.

    Research output: Contribution to conference › Presentation › Research

  44. Published

    On the potential of aluminum crossover alloys

    Stemper, L., Tunes, M. A., Tosone, R., Uggowitzer, P. & Pogatscher, S., Feb 2022, In: Progress in materials science. 124.2022, February, 14 p., 100873.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    A Tailor-Made Experimental Setup for Thermogravimetric Analysis of the Hydrogen- and Carbon Monoxide-Based Reduction of Iron (III) Oxide (Fe2O3) and Zinc Ferrite (ZnOFe2O3)

    Brandner, U., Leuchtenmüller, M., Antrekowitsch, J. & Hoffelner, F., 31 Jan 2022, TMS 2022 151st Annual Meeting & Exhibition Supplemental Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Critical Evaluation of the Potential of Organic Acids for the Environmentally Friendly Recycling of Spent Lithium-Ion Batteries

    Gerold, E., Antrekowitsch, H. & Schinnerl, C., 31 Jan 2022, In: Recycling. 7.2022, 4, 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. E-pub ahead of print

    Stabilization of Al 3 Zr allotropes in dilute aluminum alloys via the addition of ternary elements

    Schmid, F., Gehringer, D., Kremmer, T., Cattini, L., Uggowitzer, P., Holec, D. & Pogatscher, S., 25 Jan 2022, (E-pub ahead of print) In: Materialia. 21.2022, March, 11 p., 101321.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Alloy design strategy for microstructural-tailored scandium-modified aluminium alloys for additive manufacturing

    Schimbäck, D., Mair, P., Bärtl, M., Palm, F., Leichtfried, G., Mayer, S., Uggowitzer, P. J. & Pogatscher, S., 15 Jan 2022, In: Scripta Materialia. 207.2022, 15 January, 6 p., 114277.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Influence of Different Carbon Content on Reduction of Zinc Oxide via Metal Bath

    Auer, M., Antrekowitsch, J. & Wölfler, C., 11 Jan 2022, In: Applied Sciences : open access journal. 12.2022, 2, 10 p., 12020664.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    A Brief Insight: Methanpyrolyse im Flüssigmetallreaktor

    Wibner, S., Antrekowitsch, H., Neuschitzer, D. & Scheiblehner, D., 2022, In: Insight Energy. 2022, 6, p. 68-70 3 p.

    Research output: Contribution to journal › Article › Research

  51. Published

    Adaptierung einer induktiv beheizten Stranggussanlage für Al-Legierungen

    Weidinger, A., 2022, 162 p.

    Research output: Thesis › Master's Thesis

  52. Published

    Chlorination and extraction of valuable metals from iron precipitation residues in the absence of carbon as a reducing agent

    Höber, L., 2022

    Research output: Thesis › Doctoral Thesis

Previous 1 2 3 4 5 6 7 8 ...48 Next
View graph of relations

Contact information

Erzherzog-Johann-Straße 3/II, 8700 Leoben
  • Main phone number: +43 3842 402 5201 oder 5204