Chair of Metal Forming (560)

Organisational unit: Chair

501 - 550 out of 731Page size: 50

Research output

  1. 2008
  2. Published

    Vorformoptimierung für das Gesenkschmieden mittels numerischer Simulation

    Hatzenbichler, T. & Buchmayr, B., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 413-417

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Werkstoff- und verfahrenstechnische Optimierung bei der Herstellung hochfester Schrauben

    Buchmayr, B., Hatzenbichler, T., Kienreich, R. & Beyer, S., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 423-429

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Wirkung von Kühleisen im Sandguss auf Gefüge und mechanische Eigenschaften der Legierung EN AC-Al Si7Mg

    Pabel, T. & Schindelbacher, G., 2008, In: Gießerei-Rundschau. p. 153-157

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    XXVII. Verformungskundlichen Kolloquium

    Buchmayr, B. (Editor) & Harrer, O.-K. (Editor), 2008, Leoben, Österreich: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  6. Published

    Zwischenbericht Dezember 2008 "Walzplattieren" zum Projekt P056-01-20

    Lehofer, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  7. Published

    Zwischenbericht "Endlos Giess-Walzanlagen für Langprodukte" zum Projekt P056-01-09 (1.7-31.12.2007)

    Gelder, S., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  8. Published

    Zwischenbericht Februar 2008 "Walzplattieren" zum Projekt P056-01-20

    Lehofer, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    Zwischenbericht Juni 2008 "Walzplattieren" zum Projekt P056-01-20

    Lehofer, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  10. Published

    Zwischenbericht September 2008 "Walzplattieren" zum Projekt P056-01-20

    Lehofer, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    δ-phase characterization of superalloy Allvac 718 Plus™

    Sommitsch, C., Stotter, C., Leitner, H., Mitsche, S., Letofsky-Papst, I. & Stockinger, M., 2008, TMS2008 - 137th Annual Meeting and Exhibition Supplemental Proceedings: Materials Processing and Properties. p. 63-68 6 p. (TMS Annual Meeting; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Воздействие комбинации холодного с теплым термическим упрочнением на качество литейного сплава AlSi9Cu3(Fe)(Zn) (Auswirkungen einer Kombination von Kalt- mit Warmauslagerung auf die mechanischen Eigenschaften der Druckgusslegierung AlSi9Cu3(Fe)(Zn))

    Pabel, T., Geier, G., Rockenschaub, H. & Hopfinger, M., 2008, In: Giesserei-Praxis. p. 36-44

    Research output: Contribution to journal › Article › Research › peer-review

  13. 2007
  14. Published

    Mechanische Eigenschaften der Druckgusslegierung AlSi9Cu3(Fe) - eine Übersicht über die Aushärtemechanismen und die Steigerung der Eigenschaften mittels gezielter Warmauslagerung

    Rockenschaub, H., Pabel, T., Geier, G., Holzer, H. & Hopfinger, M., 5 Jun 2007

    Research output: Non-textual form › Web publication/site › Research

  15. Published

    Front end bending in plate rolling influenced by circumferential speed mismatch and geometry

    Philipp, M., Schwenzfeier, W., Fischer, F.-D., Wödlinger, R. & Fischer, C., 11 Jan 2007, In: Journal of materials processing technology. 184.2017, 1-3, p. 224-232 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Analyse von Herstellmöglichkeiten für hochfeste Nahtlosrohre

    Lackner, B. K., 2007

    Research output: Thesis › Diploma Thesis

  17. Published

    A numerical sensitivity study to determine the main influence parameters on the back-end defect

    Buchmayr, B., Hatzenbichler, T. & Umgeher, A., 2007, In: Journal of materials processing technology. 182, p. 73-78

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    A Practical Approach to Preform Design for Different Materials

    Harrer, O.-K., Sommitsch, C., Rüf, G. & Buchmayr, B., 2007, ESAFORM Conference on Material Forming. AIP Press, p. 15-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Auswirkungen einer Kombination von Kalt- mit Warmauslagerung auf die mechanischen Eigenschaften der Druckgusslegierung Al Si9Cu3(Fe)(Zn)

    Pabel, T., Rockenschaub, H., Geier, G. F. & Hopfinger, M., 2007, In: Druckguss-Praxis. p. 33-41

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Charakterisierung unterschiedlicher Schmierstoffe hinsichtlich des Reibzahlverlaufes beim Schmieden von Aluminiumlegierungen

    Buchner, B., Maderthoner, G. & Buchmayr, B., 2007, XXVI. Verformungskundliches Kolloquium. p. 255-265

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Combined EBSD, FIB and TEM investigation of the crack behaviour of the nickel based alloy 80A

    Mitsche, S., Pölt, P., Sommitsch, C. & Albu, M., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  22. Published

    Computertomographie bei Holz

    Pabel, T., Golser, M. & Neumueller, A., 2007, In: Holzforschung Austria. p. 8-9

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Computertomographie – Möglichkeiten, Erwartungen und Grenzen in der Praxis

    Geier, G., Pabel, T. & Schindelbacher, G., 2007, In: Giesserei. p. 34-41

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Computertomographie – Möglichkeiten, Erwartungen und Grenzen in der Praxis

    Geier, G., Pabel, T. & Schindelbacher, G., 2007, In: Gießerei-Rundschau. p. 82-86

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Coupled Physical and Numerical Simulation to Optimize Thermo-mechanical Metal Forming Processes

    Sommitsch, C. & Buchmayr, B., 2007, In: Steel research international. 78, p. 740-744

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Crack behaviour of the Nickel based alloy 80A during hot forming

    Mitsche, S., Pölt, P., Sommitsch, C. & Albu, M., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    Creep-fatigue of multi-part container during hot extrusion of copper – Simulation and experimental comparison

    Krumphals, F., Wlanis, T., Sommitsch, C. & Redl, C., 2007, In: Computer methods in materials science. 7, p. 47-53

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Description of a test-methodology for the formulation and selection of components of thread-molding oils

    Monetti, C., Novotny-Farkas, F., Hering, G., Buchner, B., Schiester, I. & Tonnerer, F., 2007, ECOTRIB 2007. Slovenian Scociety of tribology, p. 15-23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Development of aluminium-clad steel sheet by roll-bonding for the automotive industry

    Buchner, M., Buchmayr, B., Bichler, C. & Riemelmoser, F., 2007, 10th International ESAFORM Conference on Material Forming. p. 264-268

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Einfluss reduzierter Schmiedetemperaturen auf die Eigenschaften von AFP-Stählen

    Buchmayr, B. & Lehofer, H., 2007, Workshop "Moderne thermomechanische Prozessstrategien in der Stahlumformung". p. 53-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Einfluss von Schmiede- und Abkühlbedingungen auf das Gefüge und die Eigenschaften ausgewählter AFP-Stähle

    Lehofer, H., 2007

    Research output: Thesis › Master's Thesis

  32. Published

    Entwicklung der Gefügestruktur und Beurteilung der effektiven Dehnung bei der Warmumformung

    Candic, M., Tian, B., Kelber, S. & Sommitsch, C., 2007, XXVI. Verformungskundliches Kolloquium. p. 151-157

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Erster und zweiter Projektbericht Jänner 2007 Diplomarbeit Florian Planitzer zum Projekt: NK021-05

    Hatzenbichler, T. & Planitzer, F., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Estimation of friction under forging conditions by means of the ring-on-disc test

    Buchner, B., Umgeher, A. & Buchmayr, B., 2007, 10th ESAFORM Conference on Material Forming. AIP Press, p. 505-508

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Experimentelle Validierung von FEM-Rechnungen zur Spannungs- und Temperaturanalyse von Werkzeugen beim Kupfer-Strangpressen

    Krumphals, F., Wlanis, T., Planitzer, F. & Sommitsch, C., 2007, Experimentelle Validierung von FEM-Rechnungen zur Spannungs- und Temperaturanalyse von Werkzeugen beim Kupfer-Strangpressen. p. 65-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    FE-Modelling of the Cross-Rolling-Piercing Process with Discher Discs

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2007, 2nd International Conference Simuation and Modelling of Metallurgical Processes in Steelmaking. p. 313-317

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Finite-Elemente-Analyse der Reibungsbedingungen beim Schrägwalzen mit Diescherscheiben

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2007, Seminar "Rohrherstellung und -verarbeitung. p. 59-69

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Finite-Elemente-Modellierung des Schrägwalzens

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2007, In: Berg- und hüttenmännische Monatshefte : BHM. 152, p. 205-211

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Finite Elemente Simulation des Kalibrierprozesses für pulvermetallurgisch hergestellte Bauteile

    Wallner, S., 2007, 107 p.

    Research output: Thesis › Master's Thesis

  40. Published

    Flow Behaviour and Microstructure during Hot Deformation of Ti-5Al-5Mo-5V-3Cr-1Zr

    Warchomicka, F., Stockinger, M. & Degischer, H. P., 2007, Ti-2007 - Proceedings of the 11th World Conference on Titanium. Niinomi, M., Akiyama, S., Ikeda, M., Hagiwara, M. & Maruyama, K. (eds.). p. 511-514 4 p. (Ti-2007 - Proceedings of the 11th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Forschungsbericht Nr. 1 zum Projekt NK021-05

    Hatzenbichler, T. & Köppl, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Forschungsbericht Nr. 2 zum Projekt NK021-05

    Hatzenbichler, T., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Gekoppelte physikalische und numerische Simulation zur Optimierung von thermo-mechanischen Umformprozessen

    Sommitsch, C. & Buchmayr, B., 2007, Workshop "Moderne thermomechanische Prozessstrategien in der Stahlumformung" (Stahlzentrum VDEh), Düsseldorf. p. 89-99

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Heat Transfer during press hardening

    Forstner, K., Buchmayr, B. & Strobich, S., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    Herstellung von walzplattierten Aluminium-Stahl-Werkstoffen für die Automobilindustrie

    Buchner, M., Buchmayr, B., Bichler, C. & Riemelmoser, F., 2007, XXVI. Verformungskundliches Kolloquium. p. 199-207

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Hot forming and heat treatment simulation in a steel mill

    Redl, C., Tian, B., Wieser, V., Sommitsch, C. & Wlanis, T., 2007, In: Computer methods in materials science. 7, p. 47-53

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Improved mechanical properties of the die casting alloy AlSi9Cu3(Fe)(Zn) as a result of the combination of natural and artificial ageing

    Pabel, T., Geier, G., Rockenschaub, H. & Hopfinger, M., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 516-520

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Innovative Beiträge der Umformtechnik zum Leichtbau von Kraftfahrzeugen

    Buchmayr, B., 2007, In: Berg- und hüttenmännische Monatshefte : BHM. 152. Jg., p. 136-141

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Interaction of Recrystallization and Precipitation during Hot Forming of Alloy 80 A

    Sommitsch, C., Pölt, P., Rüf, G., Mitsche, S. & Albu, M., 2007, In: Materials Science Forum . p. 2988-2993

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Investigation of Retained Strains during Multipass Deformation

    Candic, M., Tian, B., Kleber, S., Wiesner, M. & Sommitsch, C., 2007, In: Materials Science Forum . 558-559, p. 485-490

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Local Deformation of Ti Alloys and Ti Matrix Composites

    Poletti, C., Warchomicka, F., Kremmer, S., Stockinger, M. & Degischer, H. P., 2007, Ti-2007 - Proceedings of the 11th World Conference on Titanium. Niinomi, M., Akiyama, S., Ikeda, M., Hagiwara, M. & Maruyama, K. (eds.). p. 595-598 4 p. (Ti-2007 - Proceedings of the 11th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Modellierung der Schädigung während der Warmumformung

    Rüf, G., 2007, 232 p.

    Research output: Thesis › Doctoral Thesis

Previous 1...7 8 9 10 11 12 13 14 15 Next
View graph of relations

Contact information

Franz-Josef Straße 18, 8700 Leoben