Chair of Mechanical Engineering (140)

Organisational unit: Chair

101 - 200 out of 1,376Page size: 100

Research output

  1. 2022
  2. E-pub ahead of print

    3D Printing of Dual-Cure Networks Based on (Meth)acrylate/Bispropargyl Ether Building Blocks

    Sommer, K., Rieger, P., Müller, S. M., Schwarz, R., Trimmel, G., Feuchter, M. & Grießer, T., 29 Sept 2022, (E-pub ahead of print) In: Advanced engineering materials. 2022, 7 p., 2200901.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Wear simulation in lubricated contacts considering wear-dependent surface topography changes

    Maier, M., Pusterhofer, M. & Grün, F., 21 Sept 2022.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    On the Transferability of Fatigue and Cyclic Deformation Data to 100 µm Thin Structures

    Himmelbauer, F., Winter, G., Grün, F. & Kiesling, C., 15 Sept 2022, In: Metals. 12.2022, 9, 22 p., 1524.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Experimental Evaluation of MHD Modeling of EMS During Continuous Casting

    Zhang, H., Wu, M., Zhang, Z., Ludwig, A., Kharicha, A., Rónaföldi, A., Roósz, A., Veres, Z. & Svéda, M., Aug 2022, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 53.2022, 4, p. 2166-2181 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Tribological characterization of coatings for their suitability as protective coatings for rollers using two-disc model investigations

    Grün, F. & Gódor, I., 14 Jul 2022, 7th World Tribology Congress, WTC2022, Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Influence of viscoelasticity on fatigue behaviour of short fibre reinforced polymers depending on mean stress and fibre orientation

    Stadler, G., Primetzhofer, A., Pinter, G. G. & Grün, F., 26 Jun 2022.

    Research output: Contribution to conference › Presentation › Research

  8. Published

    Optimization of disc geometry and hardness distribution for better transferability of fatigue life prediction from disc to FZG tests

    Trausmuth, A., Stoschka, M. & Grün, F., 15 Jun 2022, In: Wear. 498-499.2022, 15 June, 13 p., 204329.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Fatigue Assessment of Wire and Arc Additively Manufactured Ti-6Al-4V

    Springer, S., Leitner, M., Gruber, T., Oberwinkler, B., Lasnik, M. & Grün, F., 4 May 2022, In: Metals. 12.2022, 5, 17 p., 795.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    Methodology, validation & signal processing of acoustic emissions for selected lubricated tribological contacts

    Strablegg, C., Renhart, P., Summer, F. & Grün, F., 2 May 2022, (E-pub ahead of print) In: Materials Today: Proceedings. 2022, 5, p. 2604-2610 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    A Probabilistic Fatigue Strength Assessment in AlSi-Cast Material by a Layer-Based Approach

    Oberreiter, M., Fladischer, S., Stoschka, M. & Leitner, M., 30 Apr 2022, In: Metals. 12.2022, 5, 22 p., 784.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Microstructural Impact on Fatigue Crack Growth Behavior of Alloy 718

    Gruber, C., Raninger, P., Maierhofer, J., Gänser, H. P., Stanojevic, A., Hohenwarter, A. & Pippan, R., 21 Apr 2022, In: Metals. 12.2022, 5, 14 p., 710.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    VERFAHREN ZUM ENTFERNEN VON FLÜCHTIGEN BESTANDTEILEN AUS EINEM INDUSTRIESTAUB, UND SOMIT GEWONNENES WERTSTOFF-HALTIGES PRODUKT

    Antrekowitsch, J. (Inventor), Steinlechner, S. (Inventor) & Auer, M. (Inventor), 17 Mar 2022, IPC No. C22B 19/ 38 A I, Patent No. WO2022053568, Priority date 11 Sept 2020, Priority No. EP20200195687

    Research output: Patent

  14. Published

    VERFAHREN ZUM ENTFERNEN VON FLÜCHTIGEN BESTANDTEILEN AUS EINEM INDUSTRIESTAUB, UND WERTSTOFF-HALTIGES PRODUKT

    Antrekowitsch, J. (Inventor), Steinlechner, S. (Inventor) & Auer, M. (Inventor), 16 Mar 2022, IPC No. C22B 19/ 38 A I, Patent No. EP3967412, Priority date 11 Sept 2020, Priority No. EP20200195687

    Research output: Patent

  15. Published

    VHCF properties and assessment of specimens and thin-walled component-like structures made of high-strength steel X5CrNiCuNb16-4

    Himmelbauer, F., Winter, G., Grün, F. & Kiesling, C., 19 Feb 2022, In: International Journal of Fatigue. 156.2022, March, 10 p., 106645.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Cyclic hardening/softening experimental data in nano-clay-composite and aluminum alloy under high-temperature strain-controlled loading

    Azadi, M., Bahmanabadi, H., Grün, F., Winter, G. & Seisenbacher, B., 9 Feb 2022, In: Experimental Results. 3.2022, e6, 32 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Evaluation and consideration of local specimen material properties in lifetime prediction of short fiber-reinforced PA6T/6I

    Stadler, G., Primetzhofer, A., Pinter, G. & Grün, F., 1 Feb 2022, In: Fatigue and Fracture of Engineering Materials and Structures. 45.2022, 4, p. 980-990 11 p., 13634.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Artificial intelligence assisted fatigue failure prediction

    Schneller, W., Leitner, M., Maier, B., Grün, F., Jantschner, O., Leuders, S. & Pfeifer, T., Feb 2022, In: International Journal of Fatigue. 155.2022, February, 7 p., 106580.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Effect of binder system on the thermophysical properties of 3D-printed zirconia ceramics

    Hofer, A. K., Rabitsch, J., Jutrzenka-Trzebiatowska, D., Hofstetter, C., Gavalda-Velasco, I., Schlacher, J., Schwentenwein, M. & Bermejo, R., 1 Jan 2022, In: International journal of applied ceramic technology. 19, 1, p. 174-180 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Validation of statistic and deterministic asperity contact models using experimental Stribeck data

    Maier, M., Pusterhofer, M., Summer, F. & Grün, F., Jan 2022, In: Tribology International. 165.2022, January, 11 p., 107329.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Application of Artificial Neural Network to Predict the Thermal and Thermomechanical Behavior of Refractory Linings

    Hou, A., Jin, S., Gruber, D. & Harmuth, H., 2022, 2022 International Joint Conference on Neural Networks, IJCNN 2022 - Proceedings. Institute of Electrical and Electronics Engineers, (Proceedings of the International Joint Conference on Neural Networks; vol. 2022-July).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    CALCITE DISSOLUTION IN CLAYSTONES TREATED WITH BRINE AND HYDROGEN: IMPLICATIONS FOR UNDERGROUND HYDROGEN STORAGE CAPROCK INTEGRITY

    Bensing, J., Misch, D., Skerbisch, L. & Sachsenhofer, R., 2022, 6th International Conference on Fault and Top Seals 2022, FTS 2022. 14. (6th International Conference on Fault and Top Seals 2022, FTS 2022).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Compaction trends in the Vienna Basin: Regional top seal capacity estimation and evidence for hydrocarbon leakage

    Skerbisch, L., Misch, D., Drews, M. C., Stollhofen, H., Sachsenhofer, R. F., Arnberger, K., Schuller, V. & Zámolyi, A., 2022, 6th International Conference on Fault and Top Seals 2022, FTS 2022. 08. (6th International Conference on Fault and Top Seals 2022, FTS 2022).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    DETERMINATION OF SECONDARY CREEP STAGE PARAMETERS OF SHAPED ALUMINA SPINEL REFRACTORY WITH AID OF GENETIC ALGORITHM

    Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 2022.

    Research output: Contribution to conference › Paper › peer-review

  25. Published

    Dynamic Mechanical Response in Epoxy Nanocomposites Incorporating Various Nano-Silica Architectures

    Chaudhary, S., Vryonis, O., Vaughan, A. S., Andritsch, T. & Feuchter, M., 2022, ICD 2022 - IEEE 2022 4th International Conference on Dielectrics, Proceedings. Institute of Electrical and Electronics Engineers, p. 86-89 4 p. (ICD 2022 - IEEE 2022 4th International Conference on Dielectrics, Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Entwicklung einer Methodik zur tribologischen Prüfung von Kolbenhemd und Zylinderlaufbuchse

    Liebenwein, M., 2022

    Research output: Thesis › Master's Thesis

  27. Published

    Experimental wear evaluation of a diamond-like carbon coated pin and a steel roller using a modified component test

    Scharf, R., 2022

    Research output: Thesis › Master's Thesis

  28. Published

    Fatigue life assessment and modelling of the cyclic material behaviour of a high-strength martensitic steel

    Himmelbauer, F., Seisenbacher, B., Winter, G., Grün, F. & Kiesling, C., 2022, LCF9 Ninth International Conference on Low Cycle Fatigue.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Implementation of a viscoplastic substrate creep model in the thermomechanical simulation of the WAAM process

    Springer, S., Röcklinger, A., Leitner, M., Grün, F., Gruber, T., Lasnik, M. & Oberwinkler, B., 2022, In: Welding in the world.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Inbetriebnahme und Validierung einer Prüfmethodik zur hochfrequenten Untersuchung von dünnwandigen Bauteilen

    Kahr, P., 2022

    Research output: Thesis › Master's Thesis

  31. Published

    Normbasierte Überprüfung der elastischen Stabilität von Stahlbauteilen anhand der Finite-Elemente-Methode

    Akbarian, K., 2022

    Research output: Thesis › Master's Thesis

  32. Published

    Nuclear magnetic resonance T1 - T2 mapping as a tool for top seal assessment

    Misch, D., Liu, B., Vranjes-Wessely, S., Siedl, W. & Sachsenhofer, R. F., 2022, 6th International Conference on Fault and Top Seals 2022, FTS 2022. 11. (6th International Conference on Fault and Top Seals 2022, FTS 2022).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Numerische Parameterstudie zur optimierten und modularen Schweißpfadplanung einer repräsentativen additiv gefertigten Ti-6Al-4V Struktur

    Mager, C., 2022

    Research output: Thesis › Master's Thesis

  34. Published

    Studie des Oberflächeneinflusses und statistischer Mikrostrukturparameter auf die Ermüdungsfestigkeit

    Laireiter, A., 2022

    Research output: Thesis › Master's Thesis

  35. Published

    System Identification under General Norms for Linear Parameter Varying State-Space Systems via Sparse Matrix Methods

    Harker, M. & Rath, G., 2022, 2022 IEEE/SICE International Symposium on System Integration, SII 2022. Institute of Electrical and Electronics Engineers, p. 317-322 6 p. (2022 IEEE/SICE International Symposium on System Integration, SII 2022).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Tracing migration through mudstone top seals: A case study from the Vienna Basin

    Misch, D., Vranjes-Wessely, S., Körmös, S., Shi, X., Wolfgang, S., Zamolyi, A., Liu, B., Seemann, T. & Sachsenhofer, R. F., 2022, 6th International Conference on Fault and Top Seals 2022, FTS 2022. 02. (6th International Conference on Fault and Top Seals 2022, FTS 2022).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Validation of a New Method to Compute the Gearing Tooth Root Failure

    Neururer, M., 2022

    Research output: Thesis › Master's Thesis

  38. 2021
  39. Published

    Novel S-N curve for different hardened layers in point and line contact

    Trausmuth, A. & Grün, F., Dec 2021, In: International Journal of Fatigue. 153.2021, December, 16 p., 106439.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Stainless steel reveals an anomaly in thermal expansion behavior of severely deformed materials

    Renk, O., Enzinger, R. J., Gammer, C., Scheiber, D., Oberdorfer, B., Tkadletz, M., Stark, A., Sprengel, W., Pippan, R., Eckert, J., Romaner, L. & Ruban, A., 30 Nov 2021, In: Physical review materials . 5.2021, 11, 113609.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Set-up of a Generalized Dataset for Crack-Closure-Mechanisms of Cast Steel

    Horvath, M., Oberreiter, M., Stoschka, M. & Leitner, M., 24 Nov 2021, In: Journal of Casting & Materials Engineering. 5.2021, 4, p. 84-88 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Monitoring Tribological Events by Acoustic Emission Measurements for Bearing Contacts

    Renhart, P., Maier, M., Strablegg, C., Summer, F., Grün, F. & Eder, A., 10 Nov 2021, In: Lubricants. 9.2021, 11, 14 p., 109.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    The tribological performance of silver in aircraft turbine load cases

    Renhart, P., Summer, F., Grün, F., Posch, C. & Eder, A., Nov 2021, In: Tribology International. 163.2021, November, 15 p., 107184.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    GEGENSTAND MIT EINER BIOZIDEN BESCHICHTUNG, VERFAHREN ZUR BESCHICHTUNG EINES GEGENSTANDS UND VERWENDUNG EINER BIOZIDEN BESCHICHTUNG

    Griesser, T. (Inventor), Kern, W. (Inventor), Rockenbauer, T. (Inventor), Schwarz, R. (Inventor) & Hartmann, D. (Inventor), 7 Oct 2021, IPC No. C08J 7/ 04 A I, Patent No. WO2021198338, Priority date 2 Apr 2020, Priority No. AT20200060090

    Research output: Patent

  45. Published

    Improving the Tribological Properties of Technical Polymers with Metal Sulphide Compounds

    Hausberger, A., Stiller, T., Kappl, C., Hensgen, L. & Grün, F., 13 Sept 2021, In: Lubricants. 9.2021, 9, 13 p., 91.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Characterisation of actual weld geometry and stress concentration of butt welds exhibiting local undercuts

    Ottersböck, M. J., Leitner, M. & Stoschka, M., 1 Aug 2021, In: Engineering Structures. 240, 1 August, 18 p., 112266.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Ductile failure modelling in pre-cracked solids using coupled fracture locus theory

    Baltic, S., Magnien, J., Kolitsch, S., Gänser, H.-P., Antretter, T. & Hammer, R., Jul 2021, In: Engineering Fracture Mechanics. 252.2021, July, 13 p., 107845.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Effect of nano-clay addition and heat treatment on tensile and stress-controlled low-cycle fatigue behaviors of aluminum-silicon alloy

    Azadi, M., Dadashi, A., Winter, G., Seisenbacher, B. & Grün, F., Jul 2021, In: Frattura ed Integrità Strutturale . 15.2021, 57, p. 373-397 25 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Effect of Surface Layer on the Fatigue Strength of Selectively Laser Melted 17-4 PH Steel

    Leitner, M., Schneller, W., Springer, S. & Grün, F., Jul 2021, In: Journal of Materials Engineering and Performance. 30, 7, p. 5383-5391 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Effects of artificial ageing tests on EVA degradation: Influence of microclimate and methodology approach

    Barretta, C., Oreski, G., Kyranaki, N., Mansour, D. E., Betts, T. R., Bauermann, L. P. & Resch-Fauster, K., 20 Jun 2021, 2021 IEEE 48th Photovoltaic Specialists Conference, PVSC 2021. Institute of Electrical and Electronics Engineers, p. 312-315 4 p. (Conference Record of the IEEE Photovoltaic Specialists Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    A novel high-frequency fatigue testing methodology for small thin-walled structures in the HCF/VHCF regime

    Himmelbauer, F., Tillmanns, M., Winter, G., Grün, F. & Kiesling, C., May 2021, In: International Journal of Fatigue. 146, 146, 10 p., 106146.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Machine learning assisted calibration of a ductile fracture locus model

    Baltic, S., Asadzadeh, M. Z., Hammer, P., Magnien, J., Gänser, H. P., Antretter, T. & Hammer, R., May 2021, In: Materials and Design. 203.2021, May, 15 p., 109604.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Phenomenological wear model of case-hardened 20MnCr5 under cyclic line rolling contact

    Trausmuth, A., Godor, I. & Grün, F., 15 Apr 2021, In: Wear. 470, 15 April, 16 p., 203607.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Fatigue strength assessment of additively manufactured metallic structures considering bulk and surface layer characteristics

    Schneller, W., Leitner, M., Pomberger, S., Grün, F., Leuders, S., Pfeifer, T. & Jantschner, O., Apr 2021, In: Additive Manufacturing. 40.2021, April, 12 p., 101930.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Model Calibration and Data Set Determination Considering the Local Micro-Structure for Short Fiber Reinforced Polymers

    Primetzhofer, A., Stadler, G., Pinter, G. & Grün, F., 27 Jan 2021, In: Journal of composites science. 5.2021, 2, 11 p., 40.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Influence of thermomechanical fatigue loading conditions on the nanostructure of secondary hardening steels

    Hofinger, M., Seisenbacher, B., Landefeld, A., Ognianov, M., Turk, C., Leitner, H. & Schnitzer, R., 20 Jan 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 802.2021, 20 January, 11 p., 140672.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Impact of microstructural properties on the crack threshold of aluminium castings

    Oberreiter, M., Aigner, R., Pomberger, S., Leitner, M. & Stoschka, M., Jan 2021, In: Engineering Fracture Mechanics. 241, 10 p., 107431.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Simulation of dynamic and meta-dynamic recrystallization behavior of forged Alloy 718 parts using a multi-class grain size model

    Gruber, C., Raninger, P., Stanojevic, A., Godor, F., Rath, M., Kozeschnik, E. & Stockinger, M., Jan 2021, In: Materials. 14, 1, p. 1-15 15 p., 111.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    About the wear assessment of valve train components using an experimental screening methodology

    Gussmagg, J., 2021

    Research output: Thesis › Master's Thesis

  60. Published

    Berücksichtigung der Viskoelastizität in der Betriebsfestigkeitsanalyse von kurzfaserverstärkten Kunststoffen

    Stadler, G., 2021

    Research output: Thesis › Doctoral Thesis

  61. Published

    Charakterisierung und Modellierung von Konstruktionswerkstoffen unter thermomechanischer Beanspruchung

    Seisenbacher, B., 2021

    Research output: Thesis › Doctoral Thesis

  62. Published

    Comparison of evaluation methods regarding the tooth root stress for spur and helical gears in pulsator tests

    Fiedler, F., 2021

    Research output: Thesis › Master's Thesis

  63. Published

    Eigenspannungsstabilität von Ti-6Al-4V Strukturkomponenten

    Stanojevic, A., 2021

    Research output: Thesis › Doctoral Thesis

  64. Published

    Entwicklung eines Prüfkonzeptes für die hochfrequente Ermüdungsprüfung von kleinen, bauteilähnlichen Proben

    Klösch, R., 2021

    Research output: Thesis › Master's Thesis

  65. Published

    Fatigue strength assessment of additively manufactured 17-4PH structures considering surface layer effects and residual stresses

    Entfellner, P., 2021

    Research output: Thesis › Master's Thesis

  66. Published

    Fatigue strength assessment of additively manufactured metallic structures based on a macroscale approach

    Schneller, W., 2021

    Research output: Thesis › Doctoral Thesis

  67. Published

    FEM Analysis of Fatigue Crack Growth in Low Carbon Steel Using Single Edge Notched Tension Specimen

    Busari, Y. O., Manurung, Y. H. P., Shuaib-Babata, Y. L., Leitner, M. & Celik, E., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 645-655 11 p. (Lecture Notes in Mechanical Engineering; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Grain Growth Prediction of SS316L Stainless Steel of Bead-On-Plate Using Numerical Computation

    Mat, M. F., Manurung, Y. H. P. M., Muhammad, N., Ahmad, S. N., Adenan, M. S. & Leitner, M., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 1-11 11 p. (Lecture Notes in Mechanical Engineering; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Grid Load Mitigation in EV Fast Charging Stations Through Integration of a High-Performance Flywheel Energy Storage System with CFRP Rotor

    Buchroithner, A., Presmair, R., Haidl, P., Wegleiter, H., Thormann, B., Kienberger, T., Auer, P. & Domitner, J., 2021, 2021 IEEE Green Energy and Smart Systems Conference, IGESSC 2021. Institute of Electrical and Electronics Engineers, (2021 IEEE Green Energy and Smart Systems Conference, IGESSC 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Implementierung des lokalen Rissschließverhaltens in die numerische Rissfortschrittssimulation

    Gaugelhofer, A. J., 2021

    Research output: Thesis › Master's Thesis

  71. Published

    Influence of the Cemented Carbides Composition on the Disintegration in Liquid Zinc

    Ebner, T., Luidold, S., Czettl, C. & Storf, C., 2021, Ni-Co 2021: The 5th International Symposium on Nickel and Cobalt. Anderson, C., Goodall, G., Gostu, S., Gregurek, D., Lundström, M., Meskers, C., Nicol, S., Peuraniemi, E., Tesfaye, F., Tripathy, P. K., Wang, S. & Zhang, Y. (eds.). p. 329-343 15 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    In-plant observations and thermomechanical modeling of different vessel types applying an insulation layer

    Rebouillat, L. & Jin, S., 2021, AISTech 2021 - Proceedings of the Iron and Steel Technology Conference. Association for Iron and Steel Technology, AISTECH, p. 1667-1673 7 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 2021-June).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Investigation of Material Property Model on Substrate Deformation Induced by Thick-Walled WAAM Process Using Numerical Computation

    Ahmad, S. N., Manurung, Y. H. P., Mat, M. F. & Leitner, M., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 747-761 15 p. (Lecture Notes in Mechanical Engineering; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Mechanische und thermische Simulation eines Formel 1 Einzylinder-Prüfstandsmotors bei extrem hohen Spitzendrücken

    Kübler, P., 2021

    Research output: Thesis › Master's Thesis

  75. Published

    Microstructural characterization of neutron irradiated mineral concrete aggregates

    Arregui-Mena, J. D., Weber, J., Tunes, M. A., Torrence, C. E., Rosseel, T. M., Maruyama, I. & Edmondson, P. D., 2021, In: Transactions of the American Nuclear Society. 124, 1, p. 312-313 2 p.

    Research output: Contribution to journal › Conference article › peer-review

  76. Published

    Modelling the durability of sliding contacts

    Pusterhofer, M., 2021

    Research output: Thesis › Doctoral Thesis

  77. Published

    Modelscale methodology for the tribological characterization of novel highly stressed journal bearing systems

    Renhart, P., 2021

    Research output: Thesis › Doctoral Thesis

  78. Published

    Neue Verfahren zur Betriebsfestigkeitsbewertung von randschichtgehärteten Bauteilen

    Dobberke, D., 2021

    Research output: Thesis › Doctoral Thesis

  79. Published

    Numerical Simulation on Residual Stress and Substrate Deformation of Bead-On-Plate of SS316L Using Inherent Strain Method

    Ahmad, S. N., Manurung, Y. H. P., Taufek, T. & Leitner, M., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 723-738 16 p. (Lecture Notes in Mechanical Engineering; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Numerische Analysen zur Schweißpfadplanung komplexer WAAM-Strukturen

    Prüller, S., 2021

    Research output: Thesis › Master's Thesis

  81. Published

    On an experimental-computational approach for localised durability assessment of sliding contacts

    Pusterhofer, M. & Grün, F., 2021, In: Wear. 486-487.2021, 15 December, 18 p., 204068.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Synthesis, Properties and Performance of selected hard and wear resistant Coatings for Metal Cutting Applications

    Friedrich, B. E., 2021

    Research output: Thesis › Master's Thesis

  83. 2020
  84. Published

    Investigation of the influence of viscoelastic behaviour on the lifetime of short fibre reinforced polymers

    Stadler, G., Primetzhofer, A., Jerabek, M., Pinter, G. & Grün, F., Dec 2020, In: Polymers. 12, 12, p. 1-13 13 p., 2874.

    Research output: Contribution to journal › Article › Research › peer-review

  85. E-pub ahead of print

    Fatigue strength estimation methodology of additively manufactured metallic bulk material

    Schneller, W., Leitner, M., Leuders, S., Sprauel, J. M., Grün, F., Pfeifer, T. & Jantschner, O., 4 Nov 2020, (E-pub ahead of print) In: Additive Manufacturing. 39.2021, March, 13 p., 101688.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Precise Correlation of Contact Area and Forces in the Unstable Friction between a Rough Fluoroelastomer Surface and Borosilicate Glass

    Wang, C., Bonyadi, S. Z., Grün, F., Pinter, G., Hausberger, A. & Dunn, A. C., 16 Oct 2020, In: Materials. 13.2020, 20, p. 1-16 16 p., 4615.

    Research output: Contribution to journal › Article › Research › peer-review

  87. E-pub ahead of print

    Investigation and simulation of the age-dependent behaviour of an aluminium alloy under thermomechanical loading

    Seisenbacher, B., Winter, G. & Grün, F., 15 Oct 2020, (E-pub ahead of print) In: Mechanics of materials. 151.2020, December, 11 p., 103612.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Effect of load stress ratio on nominal and effective notch fatigue strength assessment of HFMI-treated high-strength steel cover plates

    Leitner, M. & Stoschka, M., 1 Oct 2020, In: International Journal of Fatigue. 139, October, 7 p., 105784.

    Research output: Contribution to journal › Article › Research › peer-review

  89. E-pub ahead of print

    Cumulative damage assessment of tribological durability limits

    Pusterhofer, M., Summer, F., Gódor, I. & Grün, F., 6 Jul 2020, (E-pub ahead of print) In: Wear. 456-457.2020, 15 September, 15 p., 203318.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Validation of the fatigue strength assessment of HFMI-treated steel joints under variable amplitude loading

    Leitner, M., Stoschka, M., Barsoum, Z. & Farajian, M., 23 Jun 2020, In: Welding in the world. 64.2020, 10, p. 1681-1689 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    FEM Simulation Procedure for Distortion and Residual Stress Analysis of Wire Arc Additive Manufacturing

    Nursyahirah Binti Ahmad , S., Manurung, Y., Mat, M. F., Minggu, Z., Jaffar, A., Prüller, S. & Leitner, M., 22 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 2020, 834, 11 p., 012083.

    Research output: Contribution to journal › Conference article › peer-review

  92. Published

    Grain Growth Prediction of Bead-on-Plate with Filler Wire SS316L using FEM

    Faiz Mat, M., Manurung, Y. H. P., Muhammad, N., Ditler, A., Syakir Abd Ghani, M. & Leitner, M., 22 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 2020, 834, 012009.

    Research output: Contribution to journal › Conference article › peer-review

  93. Published

    Prediction of Crack Propagation Rate and Stress Intensity Factor of Fatigue and Welded Specimen with a Two-Dimensional Finite Element Method

    Olanrewaju Busari, Y., Ariri , A., Manurung, Y., Sebayang, D., Leitner, M., Zaini, W. S. B. W., Kamilzukairi, M. A. B. M. & E. Celik, E., 22 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 2020, 834, 14 p., 012008.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Validation Study on the Statistical Size Effect in Cast Aluminium

    Oberreiter, M., Pomberger, S., Leitner, M. & Stoschka, M., 27 May 2020, In: Metals : open access journal . 10.2020, 6, p. 710 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Effect of increased yield strength, R-ratio, and plate thickness on the fatigue resistance of high-frequency mechanical impact (HFMI)–treated steel joints

    Leitner, M. & Barsoum, Z., 13 May 2020, In: Welding in the world. 64.2020, 7, p. 1245-1259 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Evaluation of tensile and low-cycle fatigue properties at elevated temperatures in piston aluminum-silicon alloys with and without nano-clay-particles and heat treatment

    Azadi, M., Bahmanabadi, H., Grün, F. & Winter, G., 11 May 2020, In: Materials Science and Engineering A. 788.2020, 24 June, 16 p., 139497.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Probabilistic Surface Layer Fatigue Strength Assessment of EN AC-46200 Sand Castings

    Pomberger, S., Oberreiter, M., Leitner, M., Stoschka, M. & Thuswaldner, J., 9 May 2020, In: Metals : open access journal . 10.2020, 5, p. 616 26 p., 616.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Modelling the effect of ageing on the yield strength of an aluminium alloy under cyclic loading at different ageing temperatures and test temperatures

    Seisenbacher, B., Winter, G. & Grün, F., 13 Apr 2020, In: International Journal of Fatigue. 137.2021, August, 9 p., 105635.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg

    Schneller, W., Leitner, M., Springer, S., Grün, F. & Taschauer, M., 1 Apr 2020, Selective Laser Melting: Materials and Applications. p. 4-12

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  100. Published

    Influence of specimen diameter size on the deformation behaviour and short-term strength range of an aluminum alloy

    Seisenbacher, B., Klösch, R., Winter, G. & Grün, F., Apr 2020, In: MP materials testing : Materialprüfung . 62.2020, 4, p. 345-350 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Linear Elastic FE-Analysis of porous, laser welded, heat treatable, aluminium high pressure die castings based on X-ray computed tomography data

    Teichmann, F., Ziemer, A., Leitner, M., Hensel, J. & Dilger, K., 2 Mar 2020, In: Materials. 13, 6, 1420.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Tribologie im Maschinenbau: In Mobilität und anderen Bereichen

    Grün, F., 2 Mar 2020, Neue Technologien und Innovationen in der Fahrzeugtechnik XVII.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Fatigue crack growth model including load sequence effects – Model development and calibration for railway axle steels

    Maierhofer, J., Gänser, H. P., Simunek, D., Leitner, M., Pippan, R. & Luke, M., 1 Mar 2020, In: International Journal of Fatigue. 132.2020, March, 11 p., 105377.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...14 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 1401