Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

351 - 400 out of 1,629Page size: 50

Research output

  1. 2019
  2. Published

    Evaluation of the influence of material, manufacturing and testing parameters on the leakage of PTFE and PEEK based sealing materials in reciprocating compressors

    Humpel, M., 2019

    Research output: Thesis › Master's Thesis

  3. Published

    Funktionalisierung polymerer Phasenwechselmaterialien

    Strommer, B., 2019

    Research output: Thesis › Master's Thesis

  4. Published

    Funtionelle hierarchische Verbundwerkstoffe für Strukturanwendungen

    Feuchter, M., 2019, In: Carbon-Composites-Magazin : die Mitgliederzeitschrift des CCeV. p. 50 1 p.

    Research output: Contribution to journal › Article › Research

  5. Published

    High-Density Polyethylene as Phase-Change Material: Long-Term Stability

    Weingrill, H., Resch-Fauster, K., Lucyshyn, T. & Zauner, C., 2019.

    Research output: Contribution to conference › Poster › Research

  6. Published

    Impact response of sandwich panels with polyurethane and polystyrene core and composite facesheets

    Mocian, O. A., Constantinescu, D. M., Sandu, M., Sorohan, Ş., Roşu, D. & Feuchter, M., 2019, In: Materials Today: Proceedings. 12, p. 192-199 8 p.

    Research output: Contribution to journal › Conference article › peer-review

  7. Published

    Mechanical Characterization of High Performance Thermal Decoupling Units for Building Envelops

    Pilz, G., Gloggnitzer, S. & Schneider, C., 2019.

    Research output: Contribution to conference › Poster › Research

  8. Published

    MECHANICAL CHARACTERIZATION OF HIGH PERFORMANCE THERMAL DECOUPLING UNITS IN BUILDING ENVELOPS

    Pilz, G., Gloggnitzer, S., Schneider, C., Pinter, G. G. & Röper, F., 2019.

    Research output: Contribution to conference › Paper › peer-review

  9. Published

    Mechanical Characterization of PMMA Produced by Fused Filament Fabrication as a Potential Material for Cranial Bone Reconstruction

    Petersmann, S., Spörk, M., Lang, M. C., Moser, C., Pinter, G. G. & Arbeiter, F., 2019, Abstract Book of the First European Conference on Structural Integrity of Additively Manufactured Materials. 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Methods for automated crack length detection in fracture mechanical fatigue tests of unreinforced polymers

    Geier, J., 2019

    Research output: Thesis › Master's Thesis

  11. Published

    Polymeric Phase-Change Materials: Applicability, Functionalization and Long-Term Stability

    Weingrill, H., 2019

    Research output: Thesis › Doctoral Thesis

  12. Published

    Residual stress measurement study on injection molded Polyoxymethylene specimens

    Schrank, T., 2019

    Research output: Thesis › Master's Thesis

  13. Published

    SRCR - Mit zeiteffizienter Prüfung zur statischen Langzeitabsicherung: Effizientes Prüfkonzept für statisch langzeitbeanspruchte Faserverbundkomponenten im Baubereich

    Pilz, G., 2019, In: Carbon-Composites-Magazin : die Mitgliederzeitschrift des CCeV.

    Research output: Contribution to journal › Article › Research

  14. Published

    Steigerung der Ressourceneffizienz durch intelligente Verpackungen

    Feuchter, M., 2019, In: vju. 2019, p. 18-19 2 p.

    Research output: Contribution to journal › Article › Transfer

  15. Published

    Weathering stability of polymeric materials developed for PV modules operating in harsh climatic conditions

    Omazic, A., 2019

    Research output: Thesis › Doctoral Thesis

  16. 2018
  17. E-pub ahead of print

    Impact of temperature on the fatigue and crack growth behavior of rubbers

    Schieppati, J., Schrittesser, B., Wondracek, A., Robin, S., Holzner, A. & Pinter, G. G., 31 Dec 2018, (E-pub ahead of print) In: Procedia Structural Integrity. 13.2018, p. 642-647 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    An investigation of fretting behavior of thermoplastic polyurethane for mechanical seal application

    Wang, C., Hausberger, A., Berer, M., Pinter, G., Grün, F. & Schwarz, T., 1 Dec 2018, In: Polymer Testing. 72, p. 271-284 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Nanostructured Carbon Fibre-Reinforced Polymer for Tailored Visual Appearance

    Lenzenweger, R., Feuchter, M., Pinter, G. G., Gruber, D. P., McNamara, D. & Brunner, A. J., 26 Nov 2018.

    Research output: Contribution to conference › Poster › Research

  20. Published

    Fatigue Fracture Properties and Morphology of Polyoxymethylene (POM) Plates Produced under Moderate Processing Conditions

    Berer, M., Halb, M., Feuchter, M., Pacher, G. & Pinter, G., 4 Nov 2018, In: International journal of polymer science . 2018, 18 p., 7410925.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Fatigue Fracture Properties and Morphology of Polyoxymethylene (POM) Plates Produced under Moderate Processing Conditions

    Berer, M., Halb, M., Feuchter, M., Pacher, G. A. & Pinter, G. G., 4 Nov 2018, In: International journal of polymer science . 2018, November, 18 p., 7410925.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Uniaxially Oriented Semi-Crystalline PET Films and their Deformation Depending on Tensile Direction

    Fritz-Popovski, G., Feuchter, M. & Maier, G., 11 Oct 2018.

    Research output: Contribution to conference › Poster › Research

  23. Published

    Influence of different polyol segments on the crystallisation behavior of polyurethane elastomers measured with DSC and DMA experiments

    Ziegler, W., Guttmann, P., Kopeinig, S., Dietrich, M., Amirosanloo, S., Riess, G. & Kern, W., 1 Oct 2018, In: Polymer Testing. 71.2018, October, p. 18-26 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Relationship between fatigue and tribological performance of Thermoplastic Polyurethanes (TPU)

    Wang, C., Stiller, T., Hausberger, A., Grün, F., Pinter, G. G. & Schwarz, T., 25 Sept 2018, Proceedings of the 3rd International conference on Polymer Tribology.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Accelerated aging of polyethylene pipe grades in aqueous chlorine dioxide at constant concentration

    Bredács, M., Frank, A., Bastero, A., Stolarz, A. & Pinter, G., 24 Sept 2018, In: Polymer Degradation and Stability. 157.2018, November, p. 80-89 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    The consequences of different printing chamber temperatures in extrusion-based additive manufacturing

    Spörk, M., Arbeiter, F., Raguz, I., Traxler, G., Schuschnigg, S., Cardon, L. & Holzer, C., 21 Sept 2018.

    Research output: Contribution to conference › Paper › peer-review

  27. Published

    Applicability of Polymeric Materials as Phase Change Materials

    Weingrill, H., Resch-Fauster, K. & Zauner, C., 4 Sept 2018, In: Macromolecular materials and engineering. 303.2018, 11, 17 p., 1800355.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Fracture mechanical characterization of mica-filled epoxy glass composites under monotonic and cyclic loading

    Pothukuchi, H. K. R., Fuchs, P., Pinter, G. & Stelzer, S., 23 Aug 2018, In: Journal of composite materials. 53.2019, 6, p. 741-751 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Compression-Loaded Cracked Cylinder - Stress Intensity Factor Evaluation

    Dlhy, P., Poduska, J., Náhlík, L., Berer, M., Gosch, A., Pinter, G. G. & Hutar, P., 2 Aug 2018, Key Engineering Materials. Vol. 774. p. 331 336 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  30. Published

    Numerical Modelling of Cylindrical Specimen under Mixed-Mode Loading Conditions

    Slavik, O., Hutar, P., Berer, M., Gosch, A., Arbeiter, F., Pinter, G. G. & Nahlik, L., 2 Aug 2018, p. 325. 330 p.

    Research output: Contribution to conference › Paper › peer-review

  31. Published

    Implementation of veriable amplitude tests in lifetime assecessment so short fibre reinforced polymeres

    Primetzhofer, A., Stadler, G., Pinter, G. & Grun, F., 4 Jul 2018, Proceeding of 7th International conference of composite materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. E-pub ahead of print

    Numerical simulations of cracked round bar test: Effect of residual stresses and crack asymmetry

    Poduška, J., Hutař, P., Frank, A., Kučera, J., Sadílek, J., Pinter, G. & Náhlík, L., 27 Jun 2018, (E-pub ahead of print) In: Engineering Fracture Mechanics. 203.2018, November, p. 18-31 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Study of notch effect and fibre orientation on fatigue strength of short glass fibre reinforced polyamide

    Stadler, G., Primetzhofer, A., Pinter, G. G. & Grun, F., 27 Jun 2018.

    Research output: Contribution to conference › Presentation › Research

  34. Published

    Comparison of J-integral methods for the characterization of tough polypropylene grades close to the glass transition temperature

    Gosch, A., Arbeiter, F. J., Berer, M. & Pinter, G., 22 Jun 2018, In: Engineering Fracture Mechanics. 203.2018, November, p. 2-17 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Overheating protection of solar thermal façades with latent heat storages based on paraffin-polymer compounds

    Resch-Fauster, K., Hengstberger, F., Zauner, C. & Holper, S., 15 Jun 2018, In: Energy and Buildings. 169.2018, 15 June, p. 254-259 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Development of a novel bio-based UV-curable epoxy system

    Klein, A., Schlögl, S. (Co-editor), Radl, S. (Co-editor) & Resch-Fauster, K. (Co-editor), 14 Jun 2018.

    Research output: Contribution to conference › Abstract

  37. Published

    Anisotropic properties of oriented short carbon fibre filled polypropylene parts fabricated by extrusion-based additive manufacturing

    Spoerk, M., Savandaiah, C., Arbeiter, F., Traxler, G., Cardon, L., Holzer, C. & Sapkota, J., 11 Jun 2018, In: Composites Part A: Applied Science and Manufacturing. 113.2018, October, p. 95-104 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Using (VA)RTM with a Rigid Mould to Produce Fibre Metal Laminates with Proven Impact Strength

    Hergan, P., Li, Y., Zaloznik, L., Kaynak, B., Arbeiter, F., Fauster, E. & Schledjewski, R., 11 Jun 2018, In: Journal of Manufacturing and Materials Processing. 2.2018, 2, 12 p., 38.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Oxidized phospholipids are proinflammatory and proatherogenic in hypercholesterolaemic mice

    Que, X., Hung, M.-Y., Yeang, C., Gonen, A., Prohaska, T. A., Sun, X., Diehl, C., Määttä, A., Gaddis, D. E., Bowden, K., Pattison, J., MacDonald, J. G., Ylä-Herttuala, S., Mellon, P. L., Hedrick, C. C., Ley, K., Miller, Y. I., Glass, C. K., Peterson, K. L. & Binder, C. J. & 2 others, Tsimikas, S. & Witztum, J. L., 6 Jun 2018, In: Nature. 558.2018, 7709, p. 301-306 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Polypropylene Filled With Glass Spheres in Extrusion‐Based Additive Manufacturing: Effect of Filler Size and Printing Chamber Temperature

    Spörk, M., Arbeiter, F., Raguž, I., Weingrill, G., Fischinger, T., Traxler, G., Schuschnigg, S., Cardon, L. & Holzer, C., 16 May 2018, In: Macromolecular materials and engineering. 303.2018, 7, 15 p., 1800179.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Thermo-physical characteristics, mechanical performance and long-term stability of high temperature latent heat storages based on paraffin-polymer compounds

    Resch-Fauster, K. & Feuchter, M., 10 May 2018, In: Thermochimica Acta. 663.2018, 10 May, p. 34-45 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Material selection, testing and validation of additively manufactured components

    Wiener, J., Arbeiter, F., Spörk, M., Gosch, A. & Pinter, G. G., 9 May 2018.

    Research output: Contribution to conference › Paper › peer-review

  43. Published

    Application of J-integral methods to tough pipe materials

    Gosch, A., Arbeiter, F., Berer, M., Wiener, J., Frank, A. & Pinter, G. G., 7 May 2018.

    Research output: Contribution to conference › Paper › peer-review

  44. Published

    Fracture mechanic principles for multi-layer pipe-wall design

    Arbeiter, F., Gosch, A., Wiener, J., Frank, A. & Pinter, G. G., 7 May 2018, p. 1. 4 p.

    Research output: Contribution to conference › Paper › peer-review

  45. Published

    Anforderungen an die Aufbereitung von Polyamid-Altpulver zur Wiederverwendung im SLS Prozess

    Berer, M., Schrank, T., Hendlich, M., Meier, G., Arbeiter, F., Lackner, J. & Kraschitzer, W., 20 Apr 2018.

    Research output: Contribution to conference › Paper

  46. Published

    Strukturbauteile aus dem 3D-Drucker: begleitende Werkstoffprüfung zur Eigenschaftsoptimierung

    Arbeiter, F., Wiener, J., Spörk, M. & Pinter, G. G., 20 Apr 2018, p. 1. 4 p.

    Research output: Contribution to conference › Paper

  47. Published

    Factors influencing CRB test results

    Poduska, J., Hutař, P., Kucera, J., Frank, A., Arbeiter, F. & Náhlík, L., 11 Apr 2018, p. 105. 109 p.

    Research output: Contribution to conference › Paper

  48. Published

    Study of mixed mode crack propagation in pipe type specimen

    Slavik, O., Hutar, P., Berer, M., Gosch, A., Arbeiter, F. & Náhlík, L., 11 Apr 2018, p. 133. 138 p.

    Research output: Contribution to conference › Paper

  49. Published

    Influence of strand orientation on mechanical properties in near homogeneous FFF produced PLA parts

    Wiener, J., Arbeiter, F., Spörk, M., Gosch, A. & Pinter, G. G., 27 Mar 2018.

    Research output: Contribution to conference › Poster › Research

  50. Published

    Toughening of polymeric materials by utilizing spatial material property variations: Towards bio-inspired multi-layered materials

    Arbeiter, F., Wiener, J., Gosch, A., Pinter, G. G. & Kolednik, O., 25 Mar 2018, p. 1. 4 p.

    Research output: Contribution to conference › Paper

  51. Published

    Influence of crosslinker and water on cyclic properties of carboxylated nitrile butadiene rubber (XNBR)

    Fleischmann, D. D., Arbeiter, F., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 12 Mar 2018, In: Polymer Testing. 67.2018, May, p. 309-321 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Influence of processing parameters on quality factors of one-shot hybrid structures made by RTM

    Hergan, P., Beter, J., Stelzer, S., Fauster, E. & Schledjewski, R., 21 Feb 2018, In: Production Engineering : research and development. 12.2018, 2, p. 185-194 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...4 5 6 7 8 9 10 11 ...33 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101