Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

701 - 800 out of 1,629Page size: 100

Research output

  1. 2014
  2. Published

    Characterisation of quasi-brittle fatigue crack growth in pipe grade polypropylene block copolymer

    Arbeiter, F., Pinter, G. & Frank, A., 2014, In: Polymer Testing. 37, p. 186-192

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Characterization of Crack Initiation and Slow Crack Growth Resistance of PE100 and PE100-RC pipe Grades with Cyclic Cracked Round Bar Tests

    Frank, A., Berger, I. J., Arbeiter, F. & Pinter, G., 2014, Proceedings of the 17 th Plastic Pipes Conference PPXVII. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Characterization of the damping behavior of thin films with dynamic mechanic analysis in bending mode

    Knapp, G., Leyrer, M., Oreski, G. & Pinter, G., 2014, ASME 2014 International Mechanical Engineering Congress & Exposition . p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Comparison of quasi-static and cyclic fatigue delamination resistance of CFRP under different mode loading

    Stelzer, S., 2014, Proceedia Materials Science. p. 000-000

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Composite to composite joint with lightweight metal reinforcement for enhanced damage tolerance

    Ucsnik, S., Stelzer, S., Sehrschön, H. & Sieglhuber, G., 2014, Composite to composite joint with lightweight metal reinforcement for enhanced damage tolerance. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Correlation of Fracture Mechanics Based Lifetime Prediction and Internal Pipe Pressure Tests

    Pinter, G., Frank, A., Berger, I. J. & Arbeiter, F., 2014, Proceedings of the 17 th Plastic Pipes Conference PPXVII. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Crosslinking and post-crosslinking of EVA in PV modules

    Oreski, G., Rauschenbach, A., Hirschl, C., Eder, G. C. & Pinter, G., 2014, 6th World Conference on Photovoltaic Energy Conversion. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Crosslinking and post-crosslinking of EVA in PV modules

    Oreski, G., Rauschenbach, A., Hirschl, C., Eder, G. C. & Pinter, G., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. Published

    Cyclic loading of polyetheretherketone at high tensile stress levels

    Berer, M., Major, Z., Pinter, G., Constantinescu, D. M. & Marsavina, L., 2014, Experimental Stress Analysis and Materials 14. Trans Tech Publications, p. 12-16 5 p. (Key Engineering Materials; vol. 601).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Dehnratenabhängige Werkstoffcharakterisierung und -modellierung faserverstärkter Kunststoffe

    Hirth, C., Wolfahrt, M., Körber, H. & Hinterdorfer, S., 2014, Schriftenreihe Kunststofftechnik Leoben Band 04. p. 59-68

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Design independent lifetime assessment method for PCBs under low cycle fatigue loading conditions

    Fuchs, P. F., Pinter, G. & Krivec, T., 2014, 15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Determination of aging for different TPE-components

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    Determination of aging for three different components

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  15. Published

    Determination of crack growth kinetics in non-reinforced semi-crystalline thermoplastics using the linear elastic fracture mechanics (LEFM) approach

    Pinter, G. & Berer, M., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    Determination of input parameters for a mix-mode cohesive zone formulation in a novel metal-CFRP-joining interface

    Kronsteiner, J., Ucsnik, S. & Stelzer, S., 2014, Proceedings of ECCM16. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Determination of mechanical properties

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Determination of slow crack growth behaviour of polyethylene pressure pipes with cracked round bar test

    Kratochvilla, T., Andreas, F. & Pinter, G., 2014, In: Polymer Testing. 40, p. 299-303

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Dynamische Charakterisierung von Schienenbefestigungskomponenten aus polymeren Werkstoffen im Eisenbahnoberbau

    Schneider, C., 2014, 91 p.

    Research output: Thesis › Master's Thesis

  20. Published

    Effect of processing conditions on mechanical properties and morphology of poly(lacitc acid) staple fibers

    Bruckmoser, K. & Resch, K., 2014,

    Programm & Abstract Booklet

    .     p. 19-19

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Einfluss der Herstellungsparameter auf die mechanischen Eigenschaften von endlosfaserverstärkten Polyurethanharzlaminaten

    Gloggnitzer, S. & Pilz, G., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  22. Published

    Einfluss der Herstellungsparameter auf die mechanischen Eigenschaften von endlosfaserverstärkten Polyurethanharzlaminaten

    Gloggnitzer, S. & Pilz, G., 2014, 23. Leobener Kunststoff-Kolloquium: Hocheffizeinte Verbundwerkstoffe. p. 175-179

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Elementanalyse metallischer Fremkörper

    Klein, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Elongational flow generating devices for the improvement of mechanical properties of PP-PNCs

    Friesenbichler, W., Battisti, M., Chitu, L. & Feuchter, M., 2014, 6th International PMI Conference Proceedings. p. 139-143

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Entwicklung und Simulation tribologischer Testmethoden in der Dichtungstechnik

    Hausberger, A., 2014, 168 p.

    Research output: Thesis › Doctoral Thesis

  26. Published

    Ermittlung dynamischer Kennlinien an drei unterschiedlichen Bauteilen

    Hinterdorfer, S. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    Erweiterung der klassischen Laminattheorie zur Berechnung ermüdungsinduzierter Steifigkeitsabfälle in CFK

    Brunbauer, J., Pinter, G. & Wolfahrt, M., 2014, Schriftenreihe Kunststofftechnik Leoben Band 4. p. 53-57

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Erweiterung der klassischen Laminattheorie zur Berechnung ermüdungsinduzierter Steifigkeitsabfälle in CFK

    Maier, J., Wolfahrt, M. & Pinter, G., 2014.

    Research output: Contribution to conference › Presentation › Research

  29. Published

    Evaluation of the applicability of the cracked round bar test as standardized PE-pipe ranking tool

    Frank, A. & Pinter, G., 2014, In: Polymer Testing. 38, p. 161-171

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Faserverstärkte Polyamide und der Einfluss der Wasseraufnahme auf deren mechanisches und thermo-mechanisches Verhalten

    Guttmann, P., Röper, F. & Pilz, G., 2014, Tagungsband Polymertec 2014. p. 372-377

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Fatigue behavior of through the thickness reinforced joints

    Stelzer, S., Ucsnik, S., Sehrschön, H., Tauchner, J. & Pinter, G., 2014, Fatigue behavior of through the thickness reinforced joints. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Fatigue behaviour of continuously carbon fibre reinforced plastics

    Brunbauer, J., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Fatigue delamination growth in CFRP composites: Fixed Ratio Mixed Mode I/II compared with Mode I and Mode II

    Stelzer, S., Pinter, G., Brunner, A. & Terrasi, G. P., 2014.

    Research output: Contribution to conference › Poster › Research

  34. Published

    Fatigue design methodology of reinforced engineering thermoplastics

    Maier, J., Mösenbacher, A. & Pinter, G., 2014.

    Research output: Contribution to conference › Presentation › Research

  35. Published

    Fatigue life prediction of carbon fibre reinforced laminates by using cycle-dependent classical laminate theory

    Brunbauer, J. & Pinter, G., 2014, In: Composites / B. p. 167-174

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Feasibility study of the correlation between damp heat test and accelerated weathering test methods for backsheets

    Hirschmann, B., Oreski, G. & Pinter, G., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Feasibility study of the correlation between damp heat test and accelerated weathering test methods for backsheets

    Hirschmann, B., Oreski, G. & Pinter, G., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Fracture Mechanical Characterization of Nanocomposite Hydrogels

    Klein, A., Whitten, P. G., Resch, K. & Pinter, G., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  39. Published

    FRACTURE MECHANICS LIFETIME PREDICTION OF PRESSURIZED POLYOLEFIN PIPES

    Pinter, G. & Frank, A., 2014, Proceedings 31 ENCUENTRO DEL GRUPO ESPAÑOL DE FRACTURA. p. 17-23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    HDT measurements and Charpy tests on different materials

    Gloggnitzer, S. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    HDT measurements on different materials

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    HDT measurements on different resin materials and flexural tests on CSM-Laminate

    Gloggnitzer, S., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Herstellung von PLA-Stapelfasern

    Bruckmoser, K. & Resch, K., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Influence of the manufacturing parameters on mechanical properties of polyurethane based composites

    Gloggnitzer, S. & Pilz, G., 2014, Proceedings ECCM16.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Investigation of Ageing Mechanisms in Thermoplastic Polyurethanes by Means of IR and Raman Spectroscopy

    Bruckmoser, K. & Resch, K., 2014, In: Macromolecular Symposia. p. 70-83

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Investigation of the dynamic mechanical behavior of Polyetheretherketone (PEEK) in the high stress tensile regime

    Berer, M., Major, Z., Pinter, G., Constantinescu, D. M. & Marsavina, L., 2014, In: Mechanics of time-dependent materials. 18, p. 663-684

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Investigations on the Tribological Behaviour of engineering polymers

    Schwab, M., Hausberger, A., Godor, I. & Pinter, G., 2014, 13th IMEKO TC15 Youth Symposium on Experimental Solid Mechanics 2014. p. 108-111 4 p. (13th IMEKO TC15 Youth Symposium on Experimental Solid Mechanics 2014).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Kompressions- und Zugversuche an Schäumen

    Hinterdorfer, S. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Longitudinal rail restraint tests of rail damping pads

    Föttinger, J. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Material Ranking of Polyethylene Pipe grades with Cyclic CRB Tests

    Frank, A. & Pinter, G., 2014, Pipes in Infrastructure 2014. p. 32-32

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Mechanical properties, fatigue damage and microstructure of carbon/epoxy laminates depending on fibre volume content

    Brunbauer, J., Pinter, G. & Stadler, H., 2014, In: International Journal of Fatigue. 70, p. 85-92

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Method development for the cyclic characterization of thin copper layers for PCB applications

    Fellner, K., Fuchs, P. F., Pinter, G., Antretter, T. & Krivec, T., 2014, In: Circuit World. 40, p. 53-60

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Mode I delamination fatigue crack growth in unidirectional fiber reinforced composites: Results from ESIS TC4 round-robins

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N., Cano, G. M. & Pinter, G., 2014, In: Engineering Fracture Mechanics. 116, p. 92-107

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Mode I, mode II and mixed mode I/II delamination growth in composites

    Jones, R., Stelzer, S. & Brunner, A., 2014, In: Composite structures. 110, p. 317-324

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Modelling and Validation of Fatigue Life Calculation Method for Short Fibre Reinforced Injection Moulded Parts

    Mösenbacher, A., Pichler, P., Guster, C., Pinter, G. & Maier, J., 2014, Proceedings of 16th Conference on Composite Materials. Sevilla

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Monotone Kompressionsversuche an Schäumen

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  57. Published

    Numerical lifetime prediction of polymer pipes taking into account residual stress

    Hutar, P., Sevcik, M., Nahlik, L., Frank, A., Kucera, J. & Pinter, G., 2014, Key engineering materials. Vol. 577-578. p. 169-172 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  58. Published

    Observation of elastic modulus inhomogeneities in thermosetting epoxies using AFM e Discerning facts and artifacts

    Haba, D., Kaufmann, J., Brunner, A. J., Resch, K. & Teichert, C., 2014, In: Polymer. 55, p. 4032-4040

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    On the strain measurement and stiffness calculation of carbon fibre reinforced composites under quasi-static tensile and tension-tension fatigue loads

    Brunbauer, J. & Pinter, G., 2014, In: Polymer Testing. 40, p. 256-264

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Optimized experimental methods for the description of the delamination and failure behavior of high performance composites and joints

    Stelzer, S., 2014

    Research output: Thesis › Doctoral Thesis

  61. Published

    Performance of elastomers for high-pressure applications

    Schrittesser, B. C., 2014, 145 p.

    Research output: Thesis › Doctoral Thesis

  62. Published

    Polymeric Thermotropic Glazings for Overheating Protection: Systematic Polymer Science Based Optimisation of Performance Characteristics

    Weber, A., 2014, 249 p.

    Research output: Thesis › Doctoral Thesis

  63. Published

    Polypropylene Multi Layer Pipe Lifetime Assessment Under Realistic Loading Conditions

    Arbeiter, F., Ševčík, M., Pinter, G., Frank, A. & Hutar, P., 2014, Proceedings of the 17 th Plastic Pipes Conference PPXVII. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Polyurethanharz - Laminate

    Gloggnitzer, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  65. Published

    Prediction of residual lifetimes of small diameter polyethylene pipes

    Bredacs, M., Frank, A., Nitsche, D., Riha, A. & Pinter, G., 2014, 17th Plastic Pipes Conference PPXVII. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Reliability testing of backsheets: Comparison between module aged and free aged films

    Knausz, M., Oreski, G., Berger, K. A., Eder, G. C., Voronko, Y., Koch, T. & Pinter, G., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  67. Published

    Reliability testing of backsheets: Comparison between module aged and free aged films

    Knausz, M., Oreski, G., Berger, K. A., Eder, G. C., Voronko, Y., Pinter, G. & Koch, T., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  68. Published

    Short-term and Long-term Behavior of PP-Polymer Nanocomposites Produced by Injection Molding Compounding

    Battisti, M., Guttmann, P., Chitu, L. & Friesenbichler, W., 2014, 30th International Conference of the Polymer Processing Society. p. 649-649

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Simulation of the 'Single Via Thermal Cycle Test' – Finite Element Modelling of PCBs under thermal loads

    Fellner, K., Fuchs, P. & Pinter, G., 2014, 13th Youth Symposium on Experimental Solid Mechanics. p. 29-32

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Spektroskopische Charakterisierung von Alterungsmechanismen in thermoplastischen Polyurethanen

    Bruckmoser, K. & Resch, K., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  71. Published

    Static and dynamic tests of some rail damping pads

    Föttinger, J. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  72. Published

    Stiffness based fatigue characterisation of CFRP

    Brunbauer, J., Arbeiter, F., Stelzer, S. & Pinter, G., 2014, In: Advanced materials research. p. 166-171

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Stiffness based fatigue characterisation of CFRP

    Maier, J., Arbeiter, F., Stelzer, S. & Pinter, G., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  74. Published

    Tailor-Made High Density PLA Foam Sheets - Strategies to Improve the Mechanical Properties

    Geissler, B., Feuchter, M., Laske, S., Walluch, M., Holzer, C. & Langecker, G. R., 2014, In: Cellular polymers. 33, 5, p. 249-257

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Technological approach to fatigue life prediction of CFRP

    Brunbauer, J. & Pinter, G., 2014, Eccm-16th European Conference on Composite Materials. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Technological approach to fatigue life prediction of CFRP

    Maier, J. & Pinter, G., 2014.

    Research output: Contribution to conference › Presentation › Research

  77. Published

    Test of a rail damping pad "SGT ZW700"

    Föttinger, J. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  78. Published

    Test of rail damping pad "ZW700 and Wpf A204"

    Föttinger, J. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  79. Published

    The effect of soil load on fracture behaviour of three-layer polymer pipe for non-pressurised applications

    Ševčík, M., Arbeiter, F., Hutar, P., Pinter, G. & Luboš, N., 2014, Key engineering materials. Vol. 627. p. 197-200 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  80. Published

    The Effect of Strain Rate on the Mechanical Properties of UD Glass-Fiber Reinforced Polymers

    Feuchter, M., Wolfahrt, M., Hirth, C. & Körber, H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  81. Published

    Thermokalorimetrische Analyse (DSC) an ABS/PA Bauteilen

    Moser, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  82. Published

    Thermomechanische Charakterisierung von Grünfolien

    Pilz, G. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  83. Published

    Thermo-mechnical characterisation of fluoropolymer films for concentrated solar thermal applications

    Hirschmann, B., Oreski, G. & Pinter, G., 2014, In: Solar energy materials and solar cells. 130, p. 615-622

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Thermotropic glazings for overheating protection. II. Morphology and structure-property relationships

    Weber, A., Klein, A. & Resch, K., 2014, In: Journal of Applied Polymer Science. p. 39910-1-13

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Thermotropic glazings for overheating protection. I. Material preselection, formulation, and light-shielding efficiency

    Weber, A. & Resch, K., 2014, In: Journal of Applied Polymer Science. p. 39950-1-13

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Thermotropic Overheating Protection Glazings: Effect of Functional Additives and Processing Conditions on Light-Shielding Efficiency

    Weber, A. & Resch, K., 2014, In: Journal of Polymer Engineering. 34, p. 161-172

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Thermotropic systems with fixed domains exhibiting enhanced overheating protection performance

    Weber, A. & Resch, K., 2014, In: Journal of Applied Polymer Science. p. 40417-1-10

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Unabhängige Lieferantenkontrolle

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  89. Published

    Untersuchungen von stumpfgeschweißten PE-Rohren mit bruchmechanischen Methoden

    Arbeiter, F., Pinter, G. & Frank, A., 2014, Tagungsband Polymertec 2014. p. 175-182

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Vibrational analysis of PV modules

    Oreski, G., Knausz, M., Berger, K. A., Eder, G. C., Voronko, Y., Pinter, G. & Wassermann, J., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  91. Published

    Werkstoffauswahl für den Einsatz von Kunststoffen in hochbeanspruchten Strukturbauteilen

    Röper, F., 2014

    Research output: Thesis › Diploma Thesis

  92. Published

    Zugversuche an Förderbändern aus kohlenstofffaserverstärktem PEEK

    Stelzer, S. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  93. Published

    Zugversuche an Isolatoren

    Gloggnitzer, S. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  94. 2013
  95. Published

    Bruchmechanik an Grenzflächen - Lebensdauervorhersagekonzepte für mehrschichtige Kunststoffkomponenten

    Arbeiter, F., 14 Nov 2013.

    Research output: Contribution to conference › Presentation › Research

  96. Published

    Methodenabstimmung für DSC-Untersuchungen von PET-Tennissaiten

    Pilz, G. & Guttmann, P., 4 Nov 2013

    Research output: Book/Report › Other report › Transfer › peer-review

  97. Published

    Comparison of fracture times of PE-HD pressure pipes and PP-Multilayer pipes using linear elastic fracture mechanics

    Arbeiter, F., 9 Sept 2013.

    Research output: Contribution to conference › Presentation › Research

  98. Published

    Interlaminar fatigue crack growth in carbon fiber reinforced composites

    Stelzer, S., Jones, R. & Brunner, A., 30 Jul 2013.

    Research output: Contribution to conference › Presentation › Research

  99. Published

    Novel composite-composite joining technology with through the thickness reinforcement for enhanced damage tolerance

    Stelzer, S., Ucsnik, S., Tauchner, J., Unger, T. & Pinter, G., 29 Jul 2013.

    Research output: Contribution to conference › Presentation › Research

  100. Published

    A pressure-dependent nonlinear viscoelastic schapery model for POM

    Tscharnuter, D., Gastl, S. & Pinter, G., 2013, Conference Proceedings of the Society for Experimental Mechanics. p. 139-148

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Bestimmung der Druckfestigkeit von PEEK

    Feuchter, M. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  102. Published

    Bestimmung der Kraft-Deformationsverläufe an unterschiedlichen Möbelverbundfolien

    Feuchter, M. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1...4 5 6 7 8 9 10 11 ...17 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101