Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

301 - 350 out of 1,629Page size: 50

Research output

  1. 2019
  2. E-pub ahead of print

    Bioinspired toughness improvement through soft interlayers in mineral reinforced polypropylene

    Wiener, J., Arbeiter, F., Tiwari, A., Kolednik, O. & Pinter, G., 19 Nov 2019, (E-pub ahead of print) In: Mechanics of materials. 140.2020, January, 13 p., 103243.

    Research output: Contribution to journal › Article › Research › peer-review

  3. E-pub ahead of print

    Optimierte Polymer-Rohrwerkstoffe für effiziente Drainagesysteme in Tunnelbauwerken - PolyDrain

    Arbeiter, F., Eichinger, S., Rieß, G., Schachinger, T., Boch, R., Wenighofer, R., Galler, R., Hausberger, A., Strobl, E., Stur, M., Saliger, F., Steiner, M., Dietzel, M. & Pinter, G. G., 18 Nov 2019, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 12, p. 545-551 7 p.

    Research output: Contribution to journal › Article › Research

  4. Published

    Soil Load on Plastic Pipe and its Influence on Lifetime

    Poduška, J., Hutař, P., Frank, A., Kučera, J., Sadílek, J., Pinter, G. & Náhlík, L., 15 Nov 2019, In: Strojnícky časopis = Journal of mechanical engineering. 69.2019, 3, p. 101-106 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    High performance composite with 100% bio-based carbon content

    Anusic, A., Blößl, Y. & Resch-Fauster, K., 12 Nov 2019.

    Research output: Contribution to conference › Poster › Research

  6. Published

    Destroying or Enhancing the Mechanical Properties of Carbon Fibre Filled PA12 filaments for Additive Manufacturing?

    Holzer, C., Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Arbeiter, F., Liu, D., Wuzella, G. H. & Lammer, H., 7 Nov 2019, p. 59-59. 1 p.

    Research output: Contribution to conference › Abstract › peer-review

  7. Published

    Fracture mechanics description of the defect in rolling cylinder

    Dlhy, P., Poduška, J., Berer, M., Gosch, A., Pinter, G. G. & Hutař, P., 4 Nov 2019.

    Research output: Contribution to conference › Paper › peer-review

  8. Published

    Research on pipe materials for tunnel drainage by the ÖBB Task Force Drainage

    Schachinger, T., Arbeiter, F., Eichinger, S. & Saliger, F., 1 Oct 2019, In: Geomechanics and tunnelling = Geomechanik und Tunnelbau. 12.2019, 5, p. 467-471 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. E-pub ahead of print

    Mixed Mode I/III fatigue fracture characterization of Polyoxymethylene

    Gosch, A., Berer, M., Hutař, P., Slavik, O., Vojtek, T., Arbeiter, F. & Pinter, G. G., 13 Sept 2019, (E-pub ahead of print) In: International Journal of Fatigue. 130.2020, January, p. 105269 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Influencing carbonate scaling by tailored drainage materials in tunnels - an experimental approach

    Eichinger, S., Arbeiter, F., Boch, R., Schachinger, T. & Dietzel, M., 6 Sept 2019.

    Research output: Contribution to conference › Poster › Research

  11. Published

    NOVEL APPROACHES FOR LIFETIME PREDICTION OF COMPOSITE MATERIALS FOR STRUCTURAL APPLICATIONS UNDER STATIC LOADS

    Pilz, G., Gloggnitzer, S., Schneider, C. & Pinter, G. G., Sept 2019.

    Research output: Contribution to conference › Paper › peer-review

  12. E-pub ahead of print

    Impact Optimization of 3D‐Printed Poly(methyl methacrylate) for Cranial Implants

    Petersmann, S., Spoerk, M., Huber, P., Lang, M., Pinter, G. & Arbeiter, F., 30 Aug 2019, (E-pub ahead of print) In: Macromolecular materials and engineering. 304.2019, 11, 10 p., 1900263.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Finite element model to describe crack deflection and constrained micro-cracking

    Tauscher, M., Pletz, M., Arbeiter, F. & Schuecker, C., 28 Aug 2019, p. 371-374. 4 p.

    Research output: Contribution to conference › Paper

  14. Published

    Fretting behavior of thermoplastic polyurethanes

    Wang, C., Hausberger, A., Berer, M., Pinter, G., Grün, F. & Schwarz, T., 23 Aug 2019, In: Lubricants. 7.2019, 9, 24 p., 73.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Mechanical Recyclability of Polypropylene Composites Produced by Material Extrusion-Based Additive Manufacturing

    Spörk, M., Arbeiter, F., Raguz, I., Holzer, C. & Gonzales-Gutierrez, J., 7 Aug 2019, In: Polymers. 11.2019, 8, 18 p., 1318.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Inter-layer bonding characterisation between materials with different degrees of stiffness processed by fused filament fabrication

    Khudiakova, A., Arbeiter, F., Spoerk, M., Wolfahrt, M., Godec, D. & Pinter, G., 1 Aug 2019, In: Additive Manufacturing. 28.2019, August, p. 184-193 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Correlation of Tribological Behavior and Fatigue Properties of Filled and Unfilled TPUs

    Wang, C., Stiller, T., Hausberger, A., Pinter, G., Grün, F. & Schwarz, T., 20 Jul 2019, In: Lubricants. 7.2019, p. 1-18 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Thermally conductive high‐density polyethylene as novel phase‐change material: Application‐relevant long‐term stability

    Weingrill, H., Resch-Fauster, K., Lucyshyn, T. & Zauner, C., 12 Jul 2019, In: Journal of Applied Polymer Science. 137.2020, 2, 10 p., 48269.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Post processing of polymeric cranial implants produced by material extrusion based additive manufacturing

    Holzer, C., Gonzalez-Gutierrez, J., Petersmann, S., Pichelmayer, M. & von Campe, G., 9 Jul 2019. 1 p.

    Research output: Contribution to conference › Abstract

  20. E-pub ahead of print

    Stress relaxation and thermally adaptable properties in vitrimer-like elastomers from HXNBR rubber with covalent bonds

    Kaiser, S., Wurzer, S., Pilz, G., Kern, W. & Schlögl, S., 8 Jul 2019, (E-pub ahead of print) In: Soft Matter. 15.2019, 30, p. 6062-6072 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Optimization of the specimen geometry of unidirectional reinforced composites with a fibre orientation of 90° for tensile, quasi-static and fatigue tests

    Schneider, C., Drvoderic, M., Schuecker, C. & Pinter, G., 28 Jun 2019, 22nd Symposium on Composites. Hausmann, J. M. (ed.). Trans Tech Publications, p. 594-597 4 p. (Key Engineering Materials; vol. 809 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    High-performance Epoxy Thermoset with 100% Bio-based Carbon Content

    Resch-Fauster, K., Anusic, A. & Mahendran, A. R., 17 Jun 2019.

    Research output: Contribution to conference › Abstract

  23. Published

    Synthesis and thermo mechanical properties of a 100% bio based epoxy resin composite

    Anusic, A., Mahendran, A. R., Blößl, Y. & Resch-Fauster, K., Jun 2019.

    Research output: Contribution to conference › Poster › Research

  24. Published

    Using soft interlayers as crack arrester in polymeric 3D-printed structures

    Arbeiter, F., Spörk, M., Wiener, J., Oesterreicher, F. & Pinter, G. G., 17 May 2019, 19th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics. p. 1 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Bonded aerospace repairs under tensile loading: Wet chemical surface treatment and selected environmental conditions: Wet chemical surface treatment and selected environmental conditions

    Röper, F., Wolfahrt, M., Schlögl, S., Kucher, G. & Pinter, G., 15 May 2019, In: Journal of Applied Polymer Science. 136.2019, 19, 47506.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Erhöhung der Bruchzähigkeit durch Multischichtaufbau

    Arbeiter, F., Oesterreicher, F., Wiener, J., Spörk, M. & Pinter, G. G., 26 Apr 2019, 28. Leobener Kunststoff-Kolloquium 2019. 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Anhydride Cured Bio-Based Epoxy Resin: Effect of Moisture on Thermal and Mechanical Properties

    Anusic, A., Resch-Fauster, K., Mahendran, A. R. & Wuzella, G. H., 25 Apr 2019, In: Macromolecular materials and engineering. 304.2019, 7, 9 p., 1900031.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    High-density polyethylene as phase-change material: Long-term stability and aging

    Weingrill, H., Resch-Fauster, K., Lucyshyn, T. & Zauner, C., 10 Apr 2019, In: Polymer Testing. 76.2019, July, p. 433-442 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Tensile properties of sintered 17-4PH stainless steel fabricated by material extrusion additive manufacturing

    Gonzalez-Gutierrez, J., Arbeiter, F., Schlauf, T., Kukla, C. & Holzer, C., 8 Apr 2019, In: Materials letters. 248.2019, 1 August, p. 165-168 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Relation between degradation of polymeric components in crystalline silicon PV module and climatic conditions: A literature review

    Omazic, A., Oreski, G., Halwachs, M., Eder, G. C., Hirschl, C., Neumaier, L., Pinter, G. & Erceg, M., 1 Apr 2019, In: Solar energy materials and solar cells. 192.2019, April, p. 123-133 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Evaluation of Digital Image Correlation Techniques for the Determination of Coefficients of Thermal Expansion for Thin Reinforced Polymers

    Gschwandl, M., Frewein, M., Fuchs, P. F., Antretter, T., Pinter, G. & Novak, P., 5 Mar 2019, EMAP 2018 - 2018 20th International Conference on Electronic Materials and Packaging. Institute of Electrical and Electronics Engineers, 8660763. (EMAP 2018 - 2018 20th International Conference on Electronic Materials and Packaging).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Additive manufacturing of zirconia parts by fused filament fabrication and solvent debinding: Selection of binder formulation

    Cano Cano, S., Gonzalez-Gutierrez, J., Sapkota, J., Spörk, M., Arbeiter, F., Schuschnigg, S., Holzer, C. & Kukla, C., 1 Mar 2019, In: Additive Manufacturing. 26.2019, March, p. 117–128 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Lifetime assessment of anisotropic materials by the example short fibre reinforced plastic

    Primetzhofer, A., Stadler, G., Pinter, G. & Grün, F., 1 Mar 2019, In: International Journal of Fatigue. 120.2019, March, p. 294-302 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Stepped Isothermal Method And Stress Rate Accelerated Creep Rupture Tests For Efficient Creep Investigaton Of Engineering Thermoplastics

    Pilz, G., Guttmann, P., Gloggnitzer, S. & Pinter, G. G., Mar 2019.

    Research output: Contribution to conference › Paper › peer-review

  35. Published

    Fracture Mechanics Lifetime Prediction of Polyethylene Pipes

    Frank, A., Arbeiter, F. J., Berger, I. J., Hutar, P., Náhlík, L. & Pinter, G., 1 Feb 2019, In: Journal of Pipeline Systems Engineering and Practice. 10.2019, 1, 04018030.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Minimum invasive production-related SLS specimen manufacturing for interface characterization of hybrid materials made by RTM

    Hergan, P., Lechner, C., Fauster, E., Pilz, G. & Schledjewski, R., 15 Jan 2019, In: International Journal of Advanced Manufacturing Technology. 102.2019, 5-8, p. 1963-1972 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Analyzing Thermal Conductivity of Polyethylene‐Based Compounds Filled with Copper

    Weingrill, H., Hohenauer, W., Resch-Fauster, K. & Zauner, C., 9 Jan 2019, In: Macromolecular materials and engineering. 304.2019, 4, 1800644.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    The Effect of the Surface Area of Carbon Black Grades on HNBR in Harsh Environments

    Balasooriya, W., Schrittesser, B., Pinter, G., Schwarz, T. & Conzatti, L., 4 Jan 2019, In: Polymers. 11.2019, 1, 61.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Data set determination for lifetime assessment of short fibre reinforced polymers

    Primetzhofer, A., Stadler, G., Pinter, G. G. & Grun, F., 1 Jan 2019, In: Zeitschrift Kunststofftechnik : Journal of plastics technology. 15.2019, 1, 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Datensatzermittlung zur lebensdauervorhersage kurzfaserverstärkter kunststoffe

    Primetzhofer, A., Stadler, G., Grün, F. & Pinter, G., 1 Jan 2019, In: Zeitschrift Kunststofftechnik/Journal of Plastics Technology. 15.2019, 1, 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Fatigue characterization of embedded layers in CFR Composites: Fatigue Design 2019, International Conference on Fatigue Design, 8th Edition

    Schneider, C., Drvoderic, M., Pinter, G., Schuecker, C. & Gaier, C., 1 Jan 2019, In: Procedia Structural Integrity. 19, p. 370-379 10 p.

    Research output: Contribution to journal › Conference article › peer-review

  42. Published

    Influence of polyolefin cross-contamination on the slow crack growth resistance of polyethylene pipe grade

    Frank, A., Berger, I. J., Messiha, M. & Pinter, G., 1 Jan 2019.

    Research output: Contribution to conference › Paper › peer-review

  43. Published

    Novel approach for the lifetime prediction of composite materials under static loads

    Gloggnitzer, S., Pilz, G., Schneider, C. & Pinter, G., 1 Jan 2019, 22nd Symposium on Composites. Hausmann, J. M. (ed.). Trans Tech Publications, p. 620-624 5 p. (Key Engineering Materials; vol. 809 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Study of notch effect and fibre orientation on fatigue strength of short glass fibre reinforced polyamide

    Stadler, G., Primetzhofer, A., Pinter, G. & Grün, F., 1 Jan 2019, ECCM 2018 - 18th European Conference on Composite Materials. (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Additive analysis in encapsulant materials and correlation to encapsulant degradation modes

    Barretta, C., Oreski, G. & Resch-Fauster, K., 2019.

    Research output: Contribution to conference › Poster › Research

  46. Published

    Aging and long-term performance of elastomers for utilization in harsh environments

    Balasooriya Arachchige, W. N., 2019

    Research output: Thesis › Doctoral Thesis

  47. Published

    An investigation on parameters influencing the properties of machine direction oriented polyethylene films

    Klobasa, J., 2019

    Research output: Thesis › Master's Thesis

  48. Published

    Beschleunigte Prüfmethoden zur Charakterisierung des langfristigen Materialverhaltens kontinuierlich glasfaserverstärkter Verbundwerkstoffe unter statischer Last

    Gloggnitzer, S., 2019

    Research output: Thesis › Doctoral Thesis

  49. Published

    Charakterisierung alterungsbedingter Verfärbungsmechanismen von PMMA-Compounds im Automobil-Exterieur

    Friedrichsen, L., 2019

    Research output: Thesis › Master's Thesis

  50. Published

    Detection of Local Anomalies on Patterned Surfaces

    Haselmann, M., 2019

    Research output: Thesis › Doctoral Thesis

  51. Published

    Development of abrasion-resistant coatings for industrial pump systems

    Tockner, M., 2019

    Research output: Thesis › Master's Thesis

Previous 1...3 4 5 6 7 8 9 10 ...33 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101