Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

251 - 300 out of 1,629Page size: 50

Research output

  1. 2020
  2. Published

    Effect of polyethylene and polypropylene cross-contamination on slow crack growth resistance

    Messiha, M., Frank, A., Koch, T., Arbeiter, F. & Pinter, G., 16 Nov 2020, In: International journal of polymer analysis and characterization. 25, 8, p. 649-666 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    100 % bio-based high-performance epoxy resin

    Todorovic, A., Blößl, Y. & Resch-Fauster, K., 11 Nov 2020.

    Research output: Contribution to conference › Poster › Research

  4. Published

    Optimierte Polymer-Rohrwerkstoffe für effiziente Drainagesysteme in Tunnelbauwerken—PolyDrain Teil II

    Arbeiter, F., Eichinger, S., Rieß, G., Schachinger, T., Boch, R., Wenighofer, R., Galler, R., Hausberger, A., Strobl, E., Stur, M., Saliger, F., Steiner, M., Dietzel, M. & Pinter, G., 6 Nov 2020, In: Berg- und hüttenmännische Monatshefte : BHM. 165.2020, 11, p. 623-630 8 p.

    Research output: Contribution to journal › Article › Research

  5. Published

    Curing of epoxidized linseed oil: Investigation of the curing reaction with different hardener types

    Todorovic, A., Resch-Fauster, K., Mahendran, A. R., Oreski, G. & Kern, W., 4 Nov 2020, In: Journal of Applied Polymer Science. 138.2021, 16, 13 p., 50239.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Fracture of Thin-Walled Polyoxymethylene Bulk Specimens in Modes I and III

    Schrader, P., Gosch, A., Berer, M. & Marzi, S., 2 Nov 2020, In: Materials. 13, 22, p. 1-18 18 p., 5096.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Processing Conditions of a Medical Grade Poly(Methyl Methacrylate) with the Arburg Plastic Freeforming Additive Manufacturing Process

    Hentschel, L., Kynast, F., Petersmann, S., Holzer, C. & Gonzalez-Gutierrez, J., 2 Nov 2020, In: Polymers. 12, 11, p. 1-15 15 p., 2677.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Using Compliant Interlayers as Crack Arresters in 3-D-Printed Polymeric Structures

    Arbeiter, F., Petersmann, S., Wiener, J., Oesterreicher, F., Spörk, M. & Pinter, G. G., 1 Nov 2020, In: Materials Performance and Characterization. 9, 5, 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. E-pub ahead of print

    Systematic analysis of the mechanical anisotropy of fibre-reinforced polymer specimens produced by laser sintering

    Khudiakova, A., Berer, M., Niedermair, S., Plank, B., Truszkiewicz, E., Meier, G., Stepanovsky, H., Wolfahrt, M., Pinter, G. & Lackner, J., 17 Oct 2020, (E-pub ahead of print) In: Additive Manufacturing. 36.2020, December, 14 p., 101671.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Precise Correlation of Contact Area and Forces in the Unstable Friction between a Rough Fluoroelastomer Surface and Borosilicate Glass

    Wang, C., Bonyadi, S. Z., Grün, F., Pinter, G., Hausberger, A. & Dunn, A. C., 16 Oct 2020, In: Materials. 13.2020, 20, p. 1-16 16 p., 4615.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    The crucial role of external force in the estimation of the topology freezing transition temperature of vitrimers by elongational creep measurements

    Kaiser, S., Novak, P., Giebler, M., Gschwandl, M., Novak, P., Pilz, G., Morak, M. & Schlögl, S., 9 Sept 2020, In: Polymer. 204, 122804.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Investigating the influence of sample configuration on EVA degradation modes

    Barretta, C., Oreski, G., Castillon, L., Kyranaki, N., Mansour, D. E., Betts, T. R., Pitta Bauermann, L. & Resch-Fauster, K., 7 Sept 2020.

    Research output: Contribution to conference › Poster › Research

  13. Published

    J-testing of polymers via the load separation criterion based ESIS TC4 procedure: Effect of the specimen size

    Gosch, A., Arbeiter, F. J., Agnelli, S., Berer, M., Pinter, G. & Baldi, F., Sept 2020, In: Polymer Testing. 89, September, 10 p., 106637.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Review on UV-induced cationic frontal polymerization of epoxy monomers

    Malik, M. S., Schlögl, S., Wolfahrt, M. & Sangermano, M., Sept 2020, In: Polymers. 12, 9, 2146.

    Research output: Contribution to journal › Review article › peer-review

  15. Published

    Viscoelastic Behavior of Glass-Fiber-Reinforced Silicone Composites Exposed to Cyclic Loading

    Beter, J., Schrittesser, B., Lechner, B., Mansouri, M. R., Marano, C., Fuchs, P. F. & Pinter, G., 19 Aug 2020, In: Polymers. 12.2020, 9, 17 p., 1862.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Increased reliability of modified polyolefin backsheet over commonly used polyester backsheets for crystalline PV modules

    Omazic, A., Oreski, G., Edler, M., Eder, G. C., Hirschl, C., Pinter, G. & Erceg, M., 10 Aug 2020, In: Journal of Applied Polymer Science. 137.2020, 30, 8 p., 48899.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Design and characterisation of vitrimer-like elastomeric composites from HXNBR rubber

    Kaiser, S., Jandl, J., Novak, P. & Schlögl, S., 3 Aug 2020, In: Soft Matter. 16.2020, 37, p. 8577-8590 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Experimental method for creep characterization of polymeric foam materials in media immersion

    Pilz, G., Guttmann, P., Oesterreicher, F. & Pinter, G. G., 30 Jul 2020, In: Mechanics of time-dependent materials. 24.2020, December, p. 421-433 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    High-performance thermoset with 100 % bio-based carbon content

    Todorovic, A., Blößl, Y., Oreski, G. & Resch-Fauster, K., 22 Jul 2020, In: Polymer Degradation and Stability. 181.2020, November, 9 p., 109284.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Applicability of the load separation criterion in J-testing of polymers: Effect of the specimen size

    Gosch, A., Arbeiter, F., Agnelli, S., Berer, M., Pinter, G. G. & Baldi, F., 29 Jun 2020.

    Research output: Contribution to conference › Abstract

  21. Published

    Process-induced morphological features in material extrusion-based additive manufacturing of polypropylene

    Petersmann, S., Spörk-Erdely, P., Feuchter, M., Wieme, T., Arbeiter, F. & Spörk, M., 18 Jun 2020, In: Additive Manufacturing. 35.2020, October, 16 p., 101384.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Leistungsfähige Composites auf Biobasis für den Leichtbau

    Anusic, A., Blößl, Y. & Resch-Fauster, K., 2 Jun 2020, In: KC-aktuell (Informationen aus dem Kunstoff-Cluster).

    Research output: Contribution to journal › Article › Research

  23. Published

    Introduction of a new in-situ measurement system for the study of touch-feel relevant surface properties

    Ules, T., Hausberger, A., Grießer, M., Schlögl, S. & Gruber, D. P., 1 Jun 2020, In: Polymers. 12.2020, 6, 1380.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Influence of Fiber Orientation and Adhesion Properties On Tailored Fiber-reinforced Elastomers

    Beter, J., Schrittesser, B., Meier, G., Fuchs, P. F. & Pinter, G., 4 May 2020, In: Applied composite materials. 27.2020, 3, p. 149-164 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Mechanical properties of polymeric implant materials produced by extrusion-based additive manufacturing

    Petersmann, S., Spörk, M., Van De Steene, W., Üçal, M., Wiener, J., Pinter, G. G. & Arbeiter, F., 1 Apr 2020, In: Journal of the Mechanical Behavior of Biomedical Materials. 104.2020, April, 13 p., 103611.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Exploiting the Carbon and Oxa Michael Addition Reaction for the Synthesis of Yne Monomers: Towards the Conversion of Acrylates to Biocompatible Building Blocks

    Hennen, D., Hartmann, D., Rieger, P. H., Oesterreicher, A., Wiener, J., Arbeiter, F., Feuchter, M., Fröhlich, E., Pichelmayer, M., Schlögl, S. & Griesser, T., 20 Mar 2020, In: ChemPhotoChem . 4.2020, 7, p. 476-480 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Slow crack growth resistance of modern PA-U12 grades measured by cyclic cracked round bar tests and strain hardening tests

    Messiha, M., Gerets, B., Heimink, J., Frank, A., Arbeiter, F. & Engelsing, K., 3 Mar 2020, In: Polymer Testing. 86.2020, June, 11 p., 106468.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Comparison and Impact of Different Fiber Debond Techniques on Fiber Reinforced Flexible Composites

    Beter, J., Schrittesser, B., Maroh, B., Sarlin, E., Fuchs, P. F. & Pinter, G., 18 Feb 2020, In: Polymers. 12.2020, 2, 11 p., 472.

    Research output: Contribution to journal › Article › Research › peer-review

  29. E-pub ahead of print

    Flow-speed-controlled quality optimisation for one-shot-hybrid RTM parts

    Hergan, P., Fauster, E., Perkonigg, D., Pinter, G. & Schledjewski, R., 11 Feb 2020, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 6.2020, 1, p. 29-37 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Automated monitoring of the crack propagation in mode I testing of thermoplastic composites by means of digital image correlation

    Khudiakova, A., Grasser, V., Blumenthal, C., Wolfahrt, M. & Pinter, G. G., 1 Feb 2020, In: Polymer Testing. 82.2020, February, 106304.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Investigation of fibre orientation and notch support of short glass fibre lot reinforced thermoplastics

    Stadler, G., Primetzhofer, A., Pinter, G. & Grün, F., 1 Feb 2020, In: International Journal of Fatigue. 131.2020, February, 8 p., 105284.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Accelerated approaches for life-time prediction of composites under static loads

    Gloggnitzer, S., Guttmann, P. & Pinter, G., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Accelerated prediction of the long-term strength behaviour of thermoplastic materials

    Hinczica, J., 2020

    Research output: Thesis › Master's Thesis

  34. Published

    Aging Mechanism and Material Ranking of PE Pipe Grades in Aqueous Chlorine Dioxide and Hypochlorite Solutions

    Bredacs, M., 2020

    Research output: Thesis › Doctoral Thesis

  35. Published

    Bruchmechanische Untersuchungen an additiv gefertigten Bimaterial-Strukturen

    Oesterreicher, F., 2020

    Research output: Thesis › Master's Thesis

  36. Published

    Computational tools for the fatigue life modeling and prediction of composite materials and structures

    Pinter, G. G., Julia, M., Gaier, C. & Vassilopoulos, A., 2020, Fatigue Life Prediction of Composites and Composite Structures.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  37. Published

    Dynamic-mechanical Characterization of Tailor-made Elastomers for Damping Applications

    Karall, J., 2020

    Research output: Thesis › Master's Thesis

  38. Published

    Entwicklung und Optimierung eines Konzepts für die Auslegung von Schmelzrippen

    Steinschneider, S., 2020

    Research output: Thesis › Master's Thesis

  39. Published

    Influence of curing degree on the mechanical performance of polymer matrix composites

    Wolfahrt, M., Pilz, G. & Lang, R., 2020, ECCM 2018 - 18th European Conference on Composite Materials. 6 p. (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Investigation of fretting behaviors of sealing materials

    Wang, C., 2020

    Research output: Thesis › Doctoral Thesis

  41. Published

    Lifetime calculation of soil-loaded non-pressure polymer pipes

    Poduška, J., Hutař, P., Frank, A., Pinter, G. & Náhlík, L., 2020, Advances in Fracture and Damage Mechanics XVIII. Paipetis, S. A. & Aliabadi, F. M. H. (eds.). Trans Tech Publications, p. 141-146 6 p. (Key Engineering Materials; vol. 827 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Methods for automated crack length detection in fracture mechanical fatigue tests of unreinforced polymers

    Gosch, A., Geier, J., Arbeiter, F., Berer, M. & Pinter, G., 2020, In: Procedia Structural Integrity. 28, p. 1184-1192 9 p.

    Research output: Contribution to journal › Conference article › peer-review

  43. Published

    Morphology and fracture mechanical behavior of Polyoxymethylene platelets produced by injection molding under industrial-near processing conditions

    Helfer, E., 2020

    Research output: Thesis › Master's Thesis

  44. Published

    Polymers for photovoltaics: Applicability and long-term behavior

    Oreski, G., 2020

    Research output: Thesis › Habilitation thesis › peer-review

  45. Published

    Stiffness-based approach to fatigue-life prediction of composite materials

    Pinter, G. G. & Julia, M., 2020, Fatigue Life Prediction of Composites and Composite Structures.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  46. Published

    Stress intensity factors in novel specimens for crack propagation under loading conditions II+III in polymers

    Slavik, O., Hutař, P., Berer, M., Gosch, A., Vojtek, T., Arbeiter, F. & Náhlík, L., 2020, AIP Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Structural Integrity and Durability of Adhesively Bonded Joints for Composite Repair in Aircraft Applications

    Röper, F., 2020

    Research output: Thesis › Doctoral Thesis

  48. Accepted/In press

    Structural integrity of shrinkage and warpage optimized polypropylene produced by material extrusion-based additive manufacturing

    Petersmann, S., Spörk, M., Wiener, J., Pinter, G. G. & Arbeiter, F., 2020, (Accepted/In press).

    Research output: Contribution to conference › Abstract › peer-review

  49. Published

    Tailoring composite architecture to improve the toughness of pipe grade materials

    Wiener, J., Arbeiter, F., Frank, A. & Pinter, G., 2020, SPE ANTEC 2020: The Annual Technical Conference for Plastic Professionals. p. 782-786 5 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. 2019
  51. Published

    Fatigue Crack Propagation under Mixed Mode I and III in Polyoxymethelene Homopolymer

    Slavik, O., Hutař, P., Gosch, A., Berer, M., Vojtek, T., Arbeiter, F., Pinter, G. G. & Nahlik, L., 13 Dec 2019, Key Engineering Materials. 827 ed. Vol. 2019. p. 404-409 6 p. (Key Engineering Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  52. E-pub ahead of print

    Application of the material inhomogeneity effect for the improvement of fracture toughness of a brittle polymer

    Tiwari, A., Wiener, J., Arbeiter, F., Pinter, G. & Kolednik, O., 4 Dec 2019, (E-pub ahead of print) In: Engineering Fracture Mechanics. 224.2020, March, 16 p., 106776.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 12 3 4 5 6 7 8 9 ...33 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101