Chair of Materials Physics (430)

Organisational unit: Chair

1901 - 1950 out of 1,985Page size: 50

Research output

  1. 2005
  2. Published

    Untersuchungsbericht Rohrprobe DOW-weiss

    Maier, G. & Dehm, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  3. Published

    Untersuchungsbericht Rohrproben Haager

    Maier, G. & Dehm, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    Viscoelastic behavior of organic materials: consequences of a logarithmic dependence of force on strain rate

    Jäger, I., 2005, In: Journal of biomechanics. 38, p. 1451-1458

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Weight funcion, J-Integral and material forces approach to apparent to ceramic multilayers

    Pascual-Herrero, J., Chen, C. R., Kolednik, O., Fischer, F. D. & Danzer, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  6. Published

    Werkstoffbasierte Standzeitoptimierung von Werkzeugen der Kaltmassivumformung - Bericht 1

    Jesner, G. & Pippan, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  7. Published

    Werkstoffbasierte Standzeitoptimierung von Werkzeugen der Kaltmassivumformung - Bericht 2

    Jesner, G. & Pippan, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  8. Published

    Werkstoffbasierte Standzeitoptimierung von Werkzeugen der Kaltmassivumformung - Bericht 3

    Jesner, G. & Pippan, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    Werkstoffbasierte Standzeitoptimierung von Werkzeugen der Kaltmassivumformung - Bericht 4

    Jesner, G. & Pippan, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  10. Published

    X-ray elastic constants determined by the combination of the sin² psi and substrate-curvature methods

    Eiper, E., Martinschitz, K.-J., Gerlach, J. W., Lackner, J. M., Zizak, I., Darowski, N. & Keckes, J., 2005, In: Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. 96, p. 1069-1073

    Research output: Contribution to journal › Article › Research › peer-review

  11. 2004
  12. Published

    Nanomechanical characterization of Ti-base nanostructure-dendrite composite

    Alcalá, G., Mato, S., Woodcock, T. G., Eckert, J., Gebert, A., Schultz, L. & Hangen, U., 1 May 2004, In: International Journal of Materials Research. 95.2004, 5, p. 317-319 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Anisotropic intrinsic and extrinsic stresses in gan thin film on LiAlO2 (100)

    Eiper, E., Gerlach, J. W., Rauschenbach, B. & Keckes, J., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    A study on crack propagation in heterogeneous elastic-plastic solids

    Srinivasan, K., Siegmund, T. & Kolednik, O., 2004, Proceedings of 15th European Conference of Fracture, Advanced Fracture Mechanics for Life and Safety Assessments. p. ?-?

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Asymmetric crack wake plasticity - a reason for roughness induced crack closure

    Pippan, R., Strobl, G., Kreuzer, H. & Motz, C., 2004, In: Acta materialia. 52, p. 4493-4502

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Crack Growth in Massive Forming: A Fracture Mechanics Approach

    Trattnig, G., Sommitsch, C. & Pippan, R., 2004, Proceedings of the 15th European Conference of Fracture. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Crack-Tip Shielding and Anti-Shielding by a Bimaterial Interface

    Kolednik, O., Predan, J., Shan, G. X., Simha, N. K. & Fischer, F. D., 2004, Proceedings The 15th European Conference of Fracture, Advanced Fracture Mechanics for Life and Safety Assessments. p. ?-?

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Der Berstdruck eines zylindrischen Stahlsilos unter Explosionsinnendruckbeanspru-chung

    Wasicek, M., Fischer, F. D., Sabirov, I. & Kolednik, O., 2004, In: Stahlbau. 73, p. 116-122

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Developing of Structure and Properties in Low-Carbon Steels During Warm and Hot Equal Channel Angular Pressing

    Dobatkin, S. V., Odessky, P. D., Pippan, R., Raab, G. I., Krasilnikov, N. A. & Arsenkin, A. M., 2004, Proceedings of the Conference "Nanomaterials by Severe Plastic Deformation - NANOSPD2". Materials Physics Inst., Univ. of Vienna, p. 804-809

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Development of Microstructure and Thermal Stability of Nanostructured Chromium Processed by Severe Plastic Deformation

    Wadsack, R., Pippan, R. & Schedler, B., 2004, Proceedings of the Conference "Nanomaterials by Severe Plastic Deformation - NANOSPD2". Materials Physics Inst., Univ. of Vienna, p. 654-659

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Discrete dislocation simulation of nanoindentation

    Kreuzer, H. G. M. & Pippan, R., 2004, In: Computational mechanics. 33, p. 292-298

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Discrete dislocation simulation of nanoindentation: the effect of moving conditions and indenter shape

    Kreuzer, H. G. M. & Pippan, R., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 387-389, p. 254-256

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Effect of growth rate on mean microfibril angle and cross-sectional shape of tracheids of Norway spruce

    Sarén, M. P., Serimaa, R., Andersson, S., Saranpää, O., Keckes, J. & Fratzl, P., 2004, In: Trees : structure and function. 18, p. 354-362

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Effect of periodic overloads in particle reinforced aluminum alloys: the near threshold behavior

    Tabernig, B. & Pippan, R., 2004, In: International Journal of Fatigue. 26, p. 323-330

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Effect of thermal treatment on microstructure in high pressure torsion (HPT) deformed nickel

    Schafler, E. & Pippan, R., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 387-389, p. 799-804

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Epitaxial growth of sexiphenyl on KCL(100)-performance of reciprocal space maps

    Oehzelt, M., Haber, T., Andreev, A., Sitter, H., Smilgies, D., Keckes, J. & Resel, R., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    Equivalent Strains in Severe Plastic Deformation

    Stüwe, H.-P., 2004, Proceedings of the Conference "Nanomaterials by Severe Plastic Deformation - NANOSPD2". Materials Physics Inst., Univ. of Vienna, p. 55-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Erratum to "On the experimental characterization of crystal plasticity in polycrystals"

    Tatschl, A. & Kolednik, O., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. A 364, p. 384-399

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Evaluation of experimental stress-strain dependence in thermally cycled Al thin film on Si(100)

    Keckes, J., Hafok, M., Eiper, E., Hofer, A., Resel, R. & Eisenmenger-Sittner, C., 2004, In: Powder diffraction. 19, p. 367-371

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Evolution of microstructural morphology and boundary spacing during high pressure torsion of nickel

    Huang, X., Vorhauer, A., Winther, G., Hansen, N., Pippan, R. & Zehetbauer, M., 2004, Proceedings of Symposium, Ultrafine Grained Materials III. p. 235-240

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Fracture processes, fracture resistance and fatigue crack propagation in gamma TiAl

    Pippan, R., Höck, M., Tesch, A., Motz, C., Beschliesser, M. & Kestler, H., 2004, Proceedings of Symposium TMS "Gamma Titanium Aluminides 2003". TMS, p. 521-530

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Fragmentation, Structural Saturation and Dynamic Effects during Severe Plastic Defor-mation

    Pippan, R., Vorhauer, A., Wetscher, F., Faleschini, M., Stüwe, H.-P. & Keckes, J., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    High resolution studies of epitaxially grown sexiphenyl on TiO2(110)

    Resel, R., Lengyel, O., Oehzelt, M., Eiper, E., Keckes, J., Krenn, J., Koller, G., Berkebile, S. & Ramsey, M., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  34. Published

    Influence of the Processing Parameters at High Pressure Torsion

    Hebesberger, T., Vorhauer, A., Stüwe, H.-P. & Pippan, R., 2004, Proceedings of the Conference "Nanomaterials by Severe Plastic Deformation - NANOSPD2". p. 447-452

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    In-situ strain mapping and orientation image microscopy of metal deformation

    Cuddy, H., Motz, C., You, X., Connolley, T. & McHugh, P. E., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. Published

    In-situ Synchrotron Studies of Structural Changes in Wood during Microtensile Tests

    Keckes, J., Burgert, I., Müller, M., Kölln, K., Hamilton, M., Burghammer, M., Roth, S. V., Stanzl-Tschegg, S. & Fratzl, P., 2004, Proceedings of the 2nd International Symposium on Wood Machining. BOKU - Univ. of Natural Resources [u.a.], p. 37-44

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    In-situ WAXS studies of structural changes in wood foils and individual wood cells during microtensile tests

    Keckes, J., Burgert, I., Müller, M., Kölln, K., Roth, S. V., Hamilton, M., Burghammer, M., Stanzl-Tschegg, S. & Fratzl, P., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Local deformation processes and damage evolution in MMCs

    Unterweger, K. & Kolednik, O., 2004, Proceedings of the 11th European Conference on Composite Materials. ESCM, European Society for Composite Materials, p. 1-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Measurement of local mechanical properties in pyrolysed wood

    Schöberl, T., Zickler, G. A., Paris, O. & Zollfrank, C., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  40. Published

    Mechanical model for the deformation of the wood cell wall

    Fratzl, P., Burgert, I. & Keckes, J., 2004, In: Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. 95, p. 579-584

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Mechanical properties of spruce wood cell walls by nanoindentation

    Gindl, W., Gupta, H. S., Schöberl, T., Lichtenegger, H. C. & Fratzl, P., 2004, In: Applied physics / A (Series A, Materials science & processing). 79, p. 2069-2073

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Mechanical Variability of the S2 Layer in Wood Cell Walls by Nanoindentation

    Gindl, W., Gupta, H. S., Schöberl, T. & Lichtenegger, H. C., 2004, Proceedings of the 2nd International Symposium on Wood Machining. BOKU - Univ. of Natural Resources [u.a.], p. 45-51

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Metallographische Präparationsmethoden für die Rasterkraftmikroskopie - Rasterkraft-mikroskopie als Werkzeug für die Materialographie

    Schöberl, T., 2004, In: Practical metallography = Praktische Metallographie. 41, p. 321-333

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Microfibril angle in wood: characterisation using X-ray scattering and influence on mechanical properties

    Keckes, J., Burgert, I., Lichtenegger, H., Reiterer, A., Stanzl-Tschegg, S. & Fratzl, P., 2004, Proceedings of COST Action E20, Wood Fibre Cell Wall Structure. p. 189-202

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Microstructural characterization of deformed volume beneath microindentations using FIB, EBSD and TEM

    Motz, C., Kiener, D., Kreuzer, H., Prantl, W. & Pippan, R., 2004, Proceedings of the 25th Risø International Symposium on Materials Science: Evolution of Deformation Microstructures in 3D. p. 459-464

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Microstructure and Thermal Stability of Tungsten based Materials after Severe Plastic Deformation

    Vorhauer, A., Knabl, W. & Pippan, R., 2004, Proceedings of the Conference "Nanomaterials by Severe Plastic Deformation - NANOSPD2". p. 648-653

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Modification of the Microstructure of Severely Deformed Steels

    Wetscher, F., Stock, R. & Pippan, R., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Nanostructured Materials produced by severe plastic deformation

    Stüwe, H.-P., 2004, Metallic Materials with High Structural Efficiency. Kluwer Academic Publishers, p. 47-54

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Numerical studies of crack sensitivity under continuous casting conditions

    Böhm, H. J., Duschlbauer, D., Drabek, T., Kolednik, O. & Shan, G. X., 2004, Continuous Casting and Hot-Rolling Conference, CCR'04, Paper No. 6.2. p. ?-?

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    On the homogeneity of deformation by high pressure torsion

    Vorhauer, A. & Pippan, R., 2004, In: Scripta materialia. 51, p. 921-925

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Osteoporosis and local variations in Material Properties

    Weber, M., Roschger, P., Reeve, J., Loveridge, N., Fratzl, P. & Klaushofer, K., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  52. Published

    Pulsed laser decomposition of silicon containing carbon thin films

    Lackner, J. M., Waldhauser, W., Ebner, R., Fian, A., Jakopic, G., Leising, G. & Schöberl, T., 2004, In: Surface & coatings technology. 177-178, p. 360-364

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...35 36 37 38 39 40 Next
View graph of relations

Contact information

Jahnstrasse 12/I, 8700 Leoben
  • Main phone number: +43 3842 804 112