Chair of Materials Physics (430)

Organisational unit: Chair

1851 - 1900 out of 1,985Page size: 50

Research output

  1. 2005
  2. Published

    Microstructural characterization of deformed volume beneath microindentaions

    Motz, C., Kiener, D., Kreuzer, H., Prantl, W. & Pippan, R., 2005, Microstructural characterization of deformed volume beneath microindentaions. p. 459-464

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Microstructural evolution of a pearlitic steel during severe plastic deformation

    Wetscher, F., Pippan, R., Sturm, S., Kauffmann, F., Scheu, C. & Dehm, G., 2005, 7th multinational Congress on Microscopy. p. 187-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Microstructure and Mechanical Properties of Si and Y Doped Tantalum

    Bischof, M. A., Mayer, S., Leitner, H., Clemens, H., Pranzas, K., Staron, P., Dehm, G., Knabl, W., Voiticek, A. & Geiger, E., 2005, 16th International Plansee Seminar, (G. Kneringer, P. Rödhammer, H. Wildner, eds.). Plansee AG, p. 489-503

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Microstructure and Thermo-mechanical Behavior of NiAl Coatings

    Dehm, G., Riethmüller, J., Wellner, P., Kraft, O., Clemens, H. & Arzt, E., 2005, Intergrative and Interdisciplinary Aspects of Intermetallics. Materials Research Society : MRS, p. S1.3.1-S.1.3.6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Nanoindentation applied on a tungsten - copper composite before and after high-pressure torsion

    Schöberl, T., Sabirov, I. & Pippan, R., 2005, In: Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. 96, p. 1056-1062

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Nanoindentation in Teeth: The Influence of Experimental Conditions on local mechanical Properties

    Guidoni, G.-M., Denkmayr, J., Schöberl, T. & Jäger, I., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  8. Published

    Nanoindentation investigations on a high pressure torsion deformed tungsten-copper composite

    Schöberl, T., Sabirov, I. & Pippan, R., 2005, Proceedings of 1st Vienna Conference Micro- and Nano-Technology. Österreichische Tribologische Gesellschaft, p. 159-166

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Nano-Indentation of SiC and Si3N4/SiC ceramic materials

    Balog, M., Sajgalík, P., Lencés, Z., Hnatko, M., Keckes, J., Huang, J. L., Janega, J. & Horvathova, R., 2005, In: Materials Science Forum . 290, p. 272-275

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Nanoindentierung

    Schöberl, T., 2005, Handbuch der Nanoanalytik Steiermark. p. 53-54

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  11. Published

    Nanoindentierungsversuche an W/Cu-Mikro- und Nano-Verbundwerkstoffen

    Schöberl, T., 2005, Handbuch der Nanoanalytik Steiermark. p. 184-185

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  12. Published

    Nanokristallisierung durch Hochverformung

    Pippan, R., Vorhauer, A., Wetscher, F. & Dehm, G., 2005, Handbuch der Nanoanalytik Steiermark. p. 47-49

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  13. Published

    Nanoscaled structure of a Cu-Fe composite processed by high-pressure torsion

    Sauvage, X. & Pippan, R., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 410-411, p. 345-347

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Nano structures by severe plastic deformation - Jahresbericht 2005

    Scheriau, S. & Pippan, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  15. Published

    Nano-versus macro-hardness of liquid phase sintered SiC

    Balog, M., Sagalík, P., Hnatko, M., Lencés, Z., Monteverde, F., Keckes, J. & Huang, J.-L., 2005, In: Journal of the European Ceramic Society. 25, p. 529-534

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Observation and modelling of the short crack growth behaviour in aluminium alloys for the designing of aircraft structures

    Tesch, A. J., 2005, 200 p.

    Research output: Thesis › Doctoral Thesis

  17. Published

    Obtaining different orientation relationships for Cu films grown on (0001) alpha-Al2O3 substrates by magnetron sputtering

    Dehm, G., Edongué, H., Wagner, T., Oh, S. H. & Arzt, E., 2005, In: Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. 96, p. 249-254

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    On the fracture behavior of inhomogeneous materials - A case study for elastically inhomogeneous bimaterials

    Kolednik, O., Predan, J., Shan, G. X., Simha, N. K. & Fischer, F. D., 2005, In: International journal of solids and structures. 42, p. 605-620

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    On the influence of temperature during severe plastic deformation and subsequent annealing

    Vorhauer, A., 2005

    Research output: Thesis › Doctoral Thesis

  20. Published

    Overloads in ductile and brittle materials

    Pippan, R., Bichler, C., Tabernig, B. & Weihnhandl, H., 2005, In: Fatigue & fracture of engineering materials & structures : Fatigue and fracture of engineering materials and structures. p. 971-981

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Periodic overloads in the near threshold regime

    Tabernig, B., Pippan, R., Foulquier, J., Rapaport, A. & Sereni, S., 2005, In: Journal of ASTM international. 1, p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Precipitation and phase transformation modelling to predict surface cracks and slab quality

    Chimani, C., Resch, H., Mörwald, K. & Kolednik, O., 2005, In: Ironmaking and steelmaking. 32, p. 1-5

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Precipitation hardening in Mg-Zn-Sn alloys with minor additions of Ca and Si

    Cohen, S., Goren-Muginstein, G., Avraham, S., Rashkova, B., Dehm, G. & Bamberger, M., 2005, In: Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. 96, p. 1081-1087

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Properties of chemically and mechanically isolated fibres of spruce (Picea abies [L.] Karst.). Part 2: Twisting phenomena

    Burgert, I., Frühmann, K., Keckes, J., Fratzl, P. & Stanzl-Tschegg, S., 2005, In: Holzforschung : international journal of the biology, chemistry, physics and technology of wood . 59, p. 247-251

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Properties of chemically and mechanically isolated fibres of spruce (Picea abies [L.] Karst.). Part 3: Mechanical charaterisation

    Burgert, I., Eder, M., Frühmann, K., Keckes, J., Fratzl, P. & Stanzl-Tschegg, S., 2005, In: Holzforschung : international journal of the biology, chemistry, physics and technology of wood . 59, p. 354-357

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    SAXS & WAXS experiments on a PE sample with NanoSTAR

    Görgl, R. & Dehm, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    SAXS experiments on a BaTiO3 sample using the NanoSTAR

    Görgl, R. & Dehm, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    SAXS experiments on a powder sample using the NanoSTAR

    Görgl, R. & Dehm, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    SAXS experiments on Fe-alloys using the NanoSTAR

    Görgl, R. & Dehm, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    SAXS experiments on Ni-alloys using the NaoSTAR

    Görgl, R. & Dehm, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    SAXS experiments on polymeric solutions using the NanoSTAR

    Görgl, R. & Dehm, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    SAXS Messungen an Nickel-Basislegierungen

    Görgl, R. & Dehm, G., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    Sekundärionen-Massensprektroskopie (SIMS) mittels FIB

    Motz, C., Kiener, D., Schöberl, T., Pippan, R. & Dehm, G., 2005, Handbuch der Nanoanalytik. p. 199-200

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  34. Published

    Simultaneous determination of experimental elastic and thermal strains in thin films

    Keckes, J., 2005, In: Journal of applied crystallography. 38, p. 311-318

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    SPD-nanocrystalline Mg and Mg-alloys for hydrogen storage

    Krystian, M., Wieczorek, A. K., Korb, G., Pippan, R., Krexner, G. & Zehetbauer, M. J., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. Published

    Strain hardening during high pressure torsion deformation

    Wetscher, F., Vorhauer, A. & Pippan, R., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 410-411, p. 213-216

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Strain hardning during high pressure torsion deformation

    Wetscher, F., Vorhauer, A. & Pippan, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Structural Changes during Plastic Deformation at Crack Tips in PVDF Films: A Scanning X-ray Scattering Study

    Maier, G., Wallner, G., Lang, R. & Fratzl, P., 2005, In: Macromolecules. 38, p. 6099-6105

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Structure and properties of a pulp fibre-reinforced composite with regenerated cellulose matrix

    Gindl, W., Schöberl, T. & Keckes, J., 2005, In: European physical journal, The / Applied physics : EPJ.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Structure of Cu deformed by high pressure torsion

    Hebesberger, T., Stüwe, H.-P., Vorhauer, A., Wetscher, F. & Pippan, R., 2005, In: Acta materialia. 53, p. 393-402

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Strukturuntersuchungen an polymeren Materialien und Knochen mit Hilfe der Röntgenkleinwinkelstreuung

    Maier, G. A., 2005, 147 p.

    Research output: Thesis › Doctoral Thesis

  42. Published

    Texture of equal channel angular pressed Cu investigated by electron back scatter diffraction and x-ray diffraction

    Schafler, E., Kopacz, I., Pippan, R. & Stüwe, H.-P., 2005, In: Kovové materiály : Metallic materials. 43, p. 422-431

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    The determination of the local conditions for void initiation in front of a crack tip for materials with second-phase particles

    Sabirov, I., Duschlbauer, D., Pettermann, H. E. & Kolednik, O., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 393, p. 275-285

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    The effect of high pressure torsion on particle clusters in metal matrix composites with very fine particles

    Sabirov, I., Kolednik, O. & Pippan, R., 2005, Proceedings of 15th International Conference on Composite Materials. Centre for Composite and Smart Materials and Structures, p. 1-9 CD

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    The effect of inclusion size on the local conditions for void nucleation near a crack tip in a mild steel

    Sabirov, I. & Kolednik, O., 2005, In: Scripta materialia. 53, p. 1373-1378

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    The experimental characterization of local fracture properties

    Kolednik, O., Sabirov, I. & Unterweger, K., 2005, Proceedings of ICF XI Turin 2005. Eigenverlag, p. ?-?

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    The local deformation behaviour of MMCs - an experimental study

    Unterweger, K. & Kolednik, O., 2005, In: Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. 96, p. 1063-1068

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    The onset of amelogenin nanosphere aggregation studied by small-angle X-ray scattering and dynamic light scattering

    Aichmayer, B., Margolis, H. C., Sigel, R., Yamakoshi, Y., Simmer, J. P. & Fratzl, P., 2005, In: Journal of structural biology. 151, p. 239-249

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Three-Dimensional Modeling of Ductile Crack Growth: Cohesive Zone Parameters and Crack Tip Triaxiality

    Chen, C. R., Kolednik, O., Heerens, J. & Fischer, F. D., 2005, In: Engineering Fracture Mechanics. 72, p. 2072-2094

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Towards reduced activation structural materials data for fusion DEMO reactors

    Möslang, A., Diegele, E., Klimiankou, M., Lässer, R., Lindau, R., Lucon, E., Materna-Morris, E., Petersen, C., Pippan, R., Rensman, J. W., Rieth, M., van der Schaaf, B., Schneider, H. C. & Tavassoli, F., 2005, In: Nuclear fusion. 45, p. 649-655

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Two different correlations between nanoindentation modulus and mineral content in the bone-cartilage interface

    Gupta, H. S., Schratter, S., Tesch, W., Roschger, P., Berzlanovich, A., Schöberl, T., Klaushofer, K. & Fratzl, P., 2005, In: Journal of structural biology. 149, p. 138-148

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...34 35 36 37 38 39 40 Next
View graph of relations

Contact information

Jahnstrasse 12/I, 8700 Leoben
  • Main phone number: +43 3842 804 112