Chair of Functional Materials and Materials Systems (425)

Organisational unit: Chair

101 - 200 out of 682Page size: 100

Research output

  1. 2023
  2. Published

    Precious metal amorphous AgAuSi: Alloy design by swapping gold for silver

    Weniger, L.-M., Gammer, C., Niewczas, M., Cordill, M. J., Spieckermann, F., Djemia, P., Faurie, D., Li, C.-H., Lassnig, A., Terziyska, V., Mitterer, C., Eckert, J. & Glushko, O., 17 Jun 2023, In: Materials and Design. 232.2023, August, 11 p., 112099.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Influence of the aspect ratio of the micro-cantilever on the determined Young’s modulus using the Euler-Bernoulli equation

    Konstantiniuk, F., Krobath, M., Ecker, W., Czettl, C., Schalk, N. & Tkadletz, M., Jun 2023, In: Materials Today Communications. 35.2023, June, 9 p., 106225.

    Research output: Contribution to journal › Article › Research › peer-review

  4. E-pub ahead of print

    Phase equilibria in the Ti-Al-W system between 800 and 1300 ◦C

    Distl, B., Rashkova, B. & Stein, F., 23 May 2023, (E-pub ahead of print) In: Materials Today Communications. 35.2023, June, 15 p., 106291.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Fine-grained aluminium crossover alloy for high-temperature sheet forming

    Samberger, S., Weißensteiner, I., Stemper, L., Kainz, C., Uggowitzer, P. & Pogatscher, S., 19 Apr 2023, In: Acta materialia. 253.2023, 1 July, 14 p., 118952.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Topography of high-speed steel substrates sputter cleaned by an Ar/Ti cathodic arc plasma

    Kampichler, J., Razumovskiy, V. I., Klünsner, T., Kholtobina, A., Brandstetter, F., Nahif, F. & Mitterer, C., 15 Apr 2023, In: Surface & coatings technology. 458.2023, 15 April, 10 p., 129344.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    Synthesis of crystalline silver niobate thin films opening pathways for future process development

    Kölbl, L., Mitterer, C. & Franz, R., 7 Apr 2023, (E-pub ahead of print) In: Vacuum. 213.2023, July, 6 p., 112077.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Decomposition of CrN induced by laser-assisted atom probe tomography

    Waldl, H., Hans, M., Schiester, M., Primetzhofer, D., Burtscher, M., Schalk, N. & Tkadletz, M., Apr 2023, In: Ultramicroscopy. 246.2023, April, 8 p., 113673.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Efficient preparation of microtip arrays for atom probe tomography using fs-laser processing

    Tkadletz, M., Waldl, H., Schiester, M., Lechner, A., Schusser, G., Krause, M. & Schalk, N., Apr 2023, In: Ultramicroscopy. 246.2023, April, 5 p., 113672.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Strength determination for rough substrate-coating interfaces with three-dimensional defect structure

    Klünsner, T., Krobath, M., Konetschnik, R., Tritremmel, C., Maier-Kiener, V., Samardzic, D., Ecker, W., Czettl, C., Mitterer, C. & Kiener, D., Apr 2023, In: International journal of refractory metals & hard materials. 112.2023, April, 10 p., 106149.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Link between cracking mechanisms of trilayer films on flexible substrates and electro-mechanical reliability under biaxial loading

    Altaf Husain, S., Kreiml, P., Renault, P.-O., Mitterer, C., Cordill, M. J. & Faurie, D., 14 Mar 2023, In: Journal of vacuum science & technology / A (JVST). 41.2023, 3, 8 p., 033403.

    Research output: Contribution to journal › Article › Research › peer-review

  12. E-pub ahead of print

    Microstructural influences on fatigue threshold behavior and fracture toughness of an additively manufactured γ-titanium aluminide

    Zeiler, S., Lintner, A., Schloffer, M., Pippan, R. & Hohenwarter, A., 22 Feb 2023, (E-pub ahead of print) In: Intermetallics. 156.2023, May, 9 p., 107852.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Thermal stability of MoNbTaTiW, MoNbTaVW and CrMoNbTaW thin films deposited by high power impulse magnetron sputtering

    Gruber, G., Lassnig, A., Žák, S., Gammer, C., Cordill, M. & Franz, R., 15 Feb 2023, In: Surface & coatings technology. 454.2023, 15 February, 7 p., 129189.

    Research output: Contribution to journal › Article › Research › peer-review

  14. E-pub ahead of print

    Oxidation behavior of a cathodic arc evaporated Cr0.69Ta0.20B0.11N coating

    Kainz, C., Letofsky-Papst, I., Saringer, C., Krüger, H., Stark, A., Schell, N., Pohler, M. & Czettl, C., 1 Feb 2023, (E-pub ahead of print) In: Journal of vacuum science & technology / A (JVST). 41.2023, 2, 10 p., 023102.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloy at elevated temperatures

    Zhang, Z.-Q., Fellner, S., Ketov, S. V., Cordill, M., Sheng, H., Mitterer, C., Song, K., Gammer, C. & Eckert, J., Feb 2023, In: Intermetallics. 153.2023, February, p. 1-11 11 p., 107797.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Investigation of the microstructure of a graded ZrN/Ti0.33Al0.67N multilayer coating using cross-sectional characterization methods

    Frank, F., Tkadletz, M., Saringer, C., Czettl, C., Pohler, M., Burghammer, M., Todt, J., Zalesak, J., Keckes, J. & Schalk, N., 25 Jan 2023, In: Surface & coatings technology. 453.2023, 25 January, 8 p., 129126.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Superconductivity in medium- and high-entropy alloy thin films: Impact of thickness and external pressure

    Pristas, G., Backai, J., Orendac, M., Gabani, S., Kosuth, F., Kuzmiak, M., Szabo, P., Gazo, E., Franz, R., Hirn, S., Gruber, G., Mitterer, C., Vorobiov, S. & Flachbart, K., 17 Jan 2023, In: Physical review : B, Condensed matter and materials physics. 107.2023, 2, 9 p., 024505.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Influence of Co-enriched surface zones in cemented carbides on the microstructure and mechanical properties of TiN/TiC0.6N0.4/ α-Al2O3 coatings

    Konstantiniuk, F., Krobath, M., Ecker, W., Tkadletz, M., Czettl, C. & Schalk, N., Jan 2023, In: International journal of refractory metals & hard materials. 110.2023, January, 8 p., 106025.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    A comprehensive study on the metallographic preparation of W-Re samples for high resolution electron-based microscopy

    Sommerauer, M., Clemens, H., Maier-Kiener, V. & Siller, M., 2023, Pract. Metallograp.. Vol. 60. p. 171-186

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Annealing effects on Al/polyimide adhesion in flexible optical solar reflectors

    Cordill, M. J., Kreiml, P., Lassnig, A., Gebhart, D., Žák, S., Mitterer, C., Grießer, T. & Milassin, G., 2023, In: IOP Conference Series: Materials Science and Engineering. 2023, 1287, 9 p., 012006.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Effect of Si alloying on Ti(Al)N hard coatings

    Moritz, Y., 2023

    Research output: Thesis › Doctoral Thesis

  22. Published

    Functionalization of nanoporous carbons for hydrogen storage

    Knabl, F., Kostoglou, N., Brandl, C., Tkadletz, M., Grießer, T. & Mitterer, C., 2023.

    Research output: Contribution to conference › Poster › Research

  23. Published

    Gas sorption analysis for advanced nanopore structure characterization

    Kostoglou, N., Mitterer, C., Stock, S., Fritz-Popovski, G. & Paris, O., 2023.

    Research output: Contribution to conference › Poster › Research

  24. Published

    Local Assessment of Mechanical Properties in Forged Alloy 718 Components Based on the Simulation of the Microstructure Evolution During Production

    Gruber, C., Raninger, P., Stanojevic, A., Godor, F., Gänser, H. P., Marsoner, S. & Stockinger, M., 2023, Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives, 2023. Ott, E. A., Andersson, J., Sudbrack, C., Bi, Z., Bockenstedt, K., Dempster, I., Fahrmann, M., Jablonski, P., Kirka, M., Liu, X., Nagahama, D., Smith, T., Stockinger, M. & Wessman, A. (eds.). p. 49-63 15 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Mechanical Properties of Al¿O¿ Coatings for Cutting Tools Deposited by Chemical Vapor Deposition

    Konstantiniuk, F., 2023

    Research output: Thesis › Doctoral Thesis

  26. Published

    Mechanical properties of nanoporous carbons for hydrogen storage applications

    Zeiler, S., Straßburg, M., Kostoglou, N., Maier-Kiener, V. & Mitterer, C., 2023.

    Research output: Contribution to conference › Poster › Research

  27. Published

    Radionuclide removal from aqueous solutions by oxidized carbon fabrics

    Ioannidis, I., Pashalidis, I., Mulla, B., Kotanidis, G., Ioannou, K., Constantinides, G., Kostoglou, N. & Rebholz, C., 2023.

    Research output: Contribution to conference › Poster › Research

  28. Published

    Realistic structural properties of amorphous SiNx from machine-learning-assisted molecular dynamics

    Nayak, G. K., Prashanth, S., Todt, J., Daniel, R. & Holec, D., 2023.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Refractory high entropy alloy thin films as diffusion barriers for microelectronic applications

    Gruber, G., 2023

    Research output: Thesis › Doctoral Thesis

  30. Published

    Removal of crystal violet dye from aqueous solutions through adsorption onto activated carbon cloth materials

    Mulla, B., Ioannou, K., Kotanidis, G., Ioannidis, I., Constantinides, G., Kostoglou, N., Pashalidis, I. & Rebholz, C., 2023.

    Research output: Contribution to conference › Poster › Research

  31. Published

    Spatially resolved peak decomposition of 3D atom probe tomography datasets

    Schiester, M., Konstantiniuk, F., Schalk, N. & Tkadletz, M., 2023.

    Research output: Contribution to conference › Poster › Research

  32. Published

    Synthesis and Characterization of High Entropy Alloy Nitrides

    Tabelander, M., 2023

    Research output: Thesis › Master's Thesis

  33. Published

    The micromechanical characterization of silicon up to 950 °C

    Schaffar, G. J. K., Tscharnuter, D. & Maier-Kiener, V., 2023.

    Research output: Contribution to conference › Poster › Research

  34. Published

    Towards Atom Probe Crystallography of Thin Films

    Rainer, D., 2023

    Research output: Thesis › Master's Thesis

  35. 2022
  36. Published

    Determination of Cooling Rate and Temperature Gradient during Formation of Cathode Spot Craters in a Vacuum Arc

    Mogeritsch, J., Franz, R., Golizadeh, M., Mitterer, C. & Kharicha, A., 19 Oct 2022, In: Crystals. 12.2022, 10, 13 p., 1486.

    Research output: Contribution to journal › Article › Research › peer-review

  37. E-pub ahead of print

    Anomalous thermal conductivity in amorphous niobium pentoxide thin films: A correlation study between structure and thermal properties

    Mitterhuber, L. M., Kaliyaperumal Veerapandiyan, V., Deluca, M., Misture, S., Schaeperkoetter, J., Tkadletz, M., Mitterer, C. & Spitaler, J., 13 Oct 2022, (E-pub ahead of print) In: Materialia. 26.2022, December, 9 p., 101601.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Coffee Waste-Derived Nanoporous Carbons for Hydrogen Storage

    Stock, S., Kostoglou, N., Selinger, J., Sprik, S., Tampaxis, C., Charalambopoulou, G., Steriotis, T., Rebholz, C., Mitterer, C. & Paris, O., 26 Sept 2022, In: ACS Applied Energy Materials. 5.2022, 9, p. 10915-10926 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Interpreting the differences between SAXS and SANS signals from nanoporous carbon surfaces

    Stock, S., Fritz-Popovski, G., Seyffertitz, M., Kostoglou, N., Demé, B. & Paris, O., 26 Sept 2022.

    Research output: Contribution to conference › Poster › Research

  40. Published

    Precipitation-based grain boundary design alters Inter- to Trans-granular Fracture in AlCrN Thin Films

    Meindlhumer, M., Ziegelwanger, T., Zalesak, J., Hans, M., Löfler, L., Spor, S., Jäger, N., Stark, A., Hruby, H., Daniel, R., Holec, D., Schneider, J. M., Mitterer, C. & Keckes, J., 15 Sept 2022, In: Acta materialia. 237.2022, 15 September, 18 p., 118156.

    Research output: Contribution to journal › Article › Research › peer-review

  41. E-pub ahead of print

    On the influence of the Cr/(Cr + Ta) ratio on the microstructure, mechanical properties and thermal stability of magnetron sputtered CrxTa1-xN coatings

    Kainz, C., Kölbl, L. & Schalk, N., 13 Sept 2022, (E-pub ahead of print) In: Surface & coatings technology. 447.2022, 15 October, p. 1-7 128877.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    In-situ small-angle neutron scattering study of hydrogen physisorption in nanoporous carbons

    Stock, S., Seyffertitz, M., Demé, B., Cristiglio, ‪., Rols, S., Prehal, C., Kostoglou, N. & Paris, O., 21 Aug 2022.

    Research output: Contribution to conference › Poster › Research

  43. Published

    Nanoporous Carbon Electrodes Derived from Coffee Side Streams for Supercapacitors in Aqueous Electrolytes

    Selinger, J., Stock, S., Schlemmer, W., Hobisch, M., Kostoglou, N., Abbas, Q., Paris, O., Mitterer, C., Hummel, M. & Spirk, S., 1 Aug 2022, In: Nanomaterials. 12.2022, 15, 15 p., 2647.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    In situ micromechanical analysis of a nano-crystalline W-Cu composite

    Burtscher, M., Alfreider, M., Kainz, C., Schmuck, K. S. & Kiener, D., Aug 2022, In: Materials and Design. 220.2022, August, 9 p., 110848.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Tribological investigations of Mo films deposited on thin polyimide substrates

    Kobierska, E., Žák, S., Hirn, S., Cordill, M. J., Franz, R. & Rebelo de Figueiredo, M., 25 Jul 2022, In: Surface & coatings technology. 442-2022, 25 July, 11 p., 128549.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Evolution of the fracture properties of arc evaporated Ti1-xAlxN coatings with increasing Al content

    Waldl, H., Tkadletz, M., Lechner, A., Czettl, C., Pohler, M. & Schalk, N., 16 Jul 2022, In: Surface & coatings technology. 444.2022, 25 August, 6 p., 128690.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Mitigating the detrimental effects of galvanic corrosion by nanoscale composite architecture design

    Renk, O., Weißensteiner, I., Cihova, M., Steyskal, E.-M., Sommer, N., Tkadletz, M., Pogatscher, S., Schmutz, P., Eckert, J., Uggowitzer, P., Pippan, R. & Weinberg, A. M., 16 Jun 2022, In: npj Materials degradation. 47.2022, 6, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Evolution of the fracture behavior of arc evaporated Ti1-xAlxN coatings with increasing Al content

    Waldl, H., Tkadletz, M., Lechner, A., Czettl, C., Pohler, M. & Schalk, N., 31 May 2022.

    Research output: Contribution to conference › Poster › Research

  49. E-pub ahead of print

    Atomic-scale understanding of the structural evolution of TiN/AlN superlattice during nanoindentation—Part 1: Deformation

    Chen, Z., Zheng, Y., Huang, Y., Gao, Z., Sheng, H., Bartosik, M., Mayrhofer, P. H. & Zhang, Z., 19 May 2022, (E-pub ahead of print) In: Acta materialia. 234.2022, 1 August, p. 1-13 118008.

    Research output: Contribution to journal › Article › Research › peer-review

  50. E-pub ahead of print

    Influence of matrix composition and MC carbide content on damage behaviour of TiN-coated high speed steel due to cyclic shear and compression load

    Gsellmann, M., Klünsner, T., Mitterer, C., Marsoner, S., Leitner, H., Boumpakis, A., Skordaris, G., Maier-Kiener, V. & Ressel, G., 16 May 2022, (E-pub ahead of print) In: Surface & coatings technology. 442.2022, 25 July, 8 p., 128546.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Evaluation of the CO2 Storage Capacity in Sandstone Formations from the Southeast Mesohellenic trough (Greece)

    Christopoulou, M. A., Koutsovitis, P., Kostoglou, N., Paraskevopoulou, C., Sideridis, A., Petrounias, P., Rogkala, A., Stock, S. & Koukouzas, N., 10 May 2022, In: Energies : open-access journal of related scientific research, technology development and studies in policy and management. 15.2022, 10, 25 p., 3491.

    Research output: Contribution to journal › Article › Research › peer-review

  52. E-pub ahead of print

    Atomic-scale understanding of the structural evolution in TiN/AlN superlattice during nanoindentation—Part 2: Strengthening

    Chen, Z., Zheng, Y., Huang, Y., Gao, Z., Sheng, H., Bartosik, M., Mayrhofer, P. H. & Zhang, Z., 5 May 2022, (E-pub ahead of print) In: Acta materialia. 234.2022, 1 August, p. 1-11 11 p., 118009.

    Research output: Contribution to journal › Article › Research › peer-review

  53. E-pub ahead of print

    Synthesis and structure of refractory high entropy alloy thin films based on the MoNbTaW system

    Gruber, G., Lassnig, A., Žák, S., Gammer, C., Cordill, M. J. & Franz, R., 22 Apr 2022, (E-pub ahead of print) In: Surface & coatings technology. 439.2022, 15 June, 10 p., 128446.

    Research output: Contribution to journal › Article › Research › peer-review

  54. E-pub ahead of print

    Thermal stability of a cathodic arc evaporated Cr 0.74 Ta 0.26 N coating

    Kainz, C., Tkadletz, M., Stark, A., Schell, N., Czettl, C., Pohler, M. & Schalk, N., 22 Apr 2022, (E-pub ahead of print) In: Materialia. 22.2022, May, 8 p., 101434.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Erratum to “Energetic balance and kinetics for the decomposition of supersaturated Ti1-xAlxN” [Acta Materialia 55 (2007) 1441–1446]

    Mayrhofer, P. H., Fischer, F.-D., Böhm, H. J., Mitterer, C. & Schneider, J. M., 1 Apr 2022, In: Acta Materialia. 227.2022, 1 April, 1 p., 117741.

    Research output: Contribution to journal › Letter › peer-review

  56. Published

    Oxidation resistance of cathodic arc evaporated Cr0.74Ta0.26N coatings

    Kainz, C., Saringer, C., Burtscher, M., Tkadletz, M., Stark, A., Schell, N., Pohler, M., Czettl, C., Kiener, D. & Schalk, N., 1 Apr 2022, In: Scripta materialia. 211.2022, 1 April, 5 p., 114492.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Influence of multilayer architecture on microstructure and fracture properties of arc evaporated TiAlTaN coatings

    Waldl, H., Tkadletz, M., Czettl, C., Pohler, M. & Schalk, N., 15 Mar 2022, In: Surface & coatings technology. 433.2022, 15 March, 7 p., 128098.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloy

    Zhang, Z., Ketov, S. V., Fellner, S., Sheng, H., Mitterer, C., Song, K. K., Gammer, C. & Eckert, J., 10 Mar 2022, In: Materials and Design. 216.2022, April, 8 p., 110530.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Microstructural and micro-mechanical investigation of cathodic arc evaporated ZrN/TiN multilayer coatings with varying bilayer thickness

    Frank, F., Kainz, C., Tkadletz, M., Czettl, C., Pohler, M. & Schalk, N., 25 Feb 2022, In: Surface & coatings technology. 432.2022, 25 February, 9 p., 128070.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Impact of Si on the high-temperature oxidation of AlCr(Si)N coatings

    Jäger, N., Meindlhumer, M., Zitek, M., Spor, S., Hruby, H., Nahif, F., Julin, J., Rosenthal, M., Keckes, J., Mitterer, C. & Daniel, R., 20 Feb 2022, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 100.2022, 20 February, p. 91-100 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Biocompatibility and antibacterial properties of TiCu(Ag) thin films produced by physical vapor deposition magnetron sputtering

    Rashid, S., Vita, G. M., Persichetti, L., Iucci, G., Battocchio, C., Daniel, R., Visaggio, D., Marsotto, M., Visca, P., Bemporad, E., Ascenzi, P., Capellini, G., Sebastiani, M. & di Masi, A., 30 Jan 2022, In: Applied surface science. 573.2022, 30 January, 12 p., 151604.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Materials Engineering for Flexible Metallic Thin Film Applications

    Cordill, M. J., Kreiml, P. & Mitterer, C., 25 Jan 2022, In: Materials. 15.2022, 3, 25 p., 926.

    Research output: Contribution to journal › Review article › peer-review

  63. Published

    Hard coatings for cutting applications: Physical vs. chemical vapor deposition and future challenges for the coatings community

    Schalk, N., Tkadletz, M. & Mitterer, C., 15 Jan 2022, In: Surface & coatings technology. 429.2022, 15 January, 30 p., 127949.

    Research output: Contribution to journal › Review article › peer-review

  64. Published

    Microstructure-dependent phase stability and precipitation kinetics in equiatomic CrMnFeCoNi high-entropy alloy: Role of grain boundaries

    Daniel, R., Zalesak, J., Matko, I., Baumegger, W., Hohenwarter, A., George, E. P. & Keckes, J., 15 Jan 2022, In: Acta materialia. 223.2022, 15 January, 8 p., 117470.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Influence of B content on microstructure, phase composition and mechanical properties of CVD Ti(B,N) coatings

    Tkadletz, M., Schalk, N., Lechner, A., Hatzenbichler, L., Holec, D., Hofer, C., Deluca, M., Sartory, B., Lyapin, A., Julin, J. & Czettl, C., 10 Jan 2022, In: Materialia. 21.2022, March, 9 p., 101323.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Bond strength between TiN coating and microstructural constituents of a high speed steel determined by first principle calculations

    Gsellmann, M., Scheiber, D., Klünsner, T., Zalesak, J., Zhang, Z., Leitner, H., Mitterer, C., Ressel, G. & Romaner, L., 1 Jan 2022, In: Acta materialia. 222.2022, 1 January, 9 p., 117439.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Nanoporous polymer-derived activated carbon for hydrogen adsorption and electrochemical energy storage

    Kostoglou, N., Koczwara, C., Stock, S., Tampaxis, C., Charalambopoulou, G., Steriotis, T., Paris, O., Rebholz, C. & Mitterer, C., 1 Jan 2022, In: Chemical Engineering Journal. 427.2021, 1 January, 10 p., 131730.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Combined electro-mechanical and tribological behavior of MoN films deposited on thin polyimide foils

    Rebelo de Figueiredo, M., Kirchmair, M., Kobierska, E., Kreiml, P., Franz, R. & Cordill, M., 2022.

    Research output: Contribution to conference › Poster › Research

  69. Published

    Development of TiAlN based hard coatings applying advanced characterization methods

    Waldl, H., 2022

    Research output: Thesis › Doctoral Thesis

  70. Published

    Film thickness and architecture effects in biaxially strained polymer supported Al/Mo bilayers

    Cordill, M., Kreiml, P., Putz, B., Trost, C. O. W., Lassnig, A., Mitterer, C., Faurie, D. & Renault, P.-O., 2022, In: Materials Today Communications. 31.2022, June, 11 p., 103455.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    High-temperature micromechanical testing of silicon

    Schaffar, G. J. K. & Tscharnuter, D., 2022.

    Research output: Contribution to conference › Poster › Research

  72. Published

    Investigation of MoNbTaW-X(X=Ti, V, Cr, Mn, Hf) refractory high entropy alloy thin films deposited by high power impulse magnetron sputtering

    Gruber, G., Žák, S., Lassnig, A., Gammer, C., Cordill, M. J. & Franz, R., 2022.

    Research output: Contribution to conference › Poster › Research

  73. Published

    Microstructure and mechanical properties of TiN/CrN multilayer coatings deposited in an industrial-scale HiPIMS system

    Sala Bascompte, N., Abad, M. D., Rebelo de Figueiredo, M., Franz, R., Kainz, C. & Colominas, C., 2022.

    Research output: Contribution to conference › Poster › Research

  74. Published

    Microstructure, mechanical properties and thermal stability of arc evaporated Cr0.69Ta0.20B0.11N coatings

    Kainz, C., Pohler, M., Tkadletz, M., Czettl, C. & Schalk, N., 2022.

    Research output: Contribution to conference › Poster › Research

  75. Published

    Oxidation mechanism of TiSiN and TiAlSiN coatings investigated by in-situ X-ray diffraction

    Moritz, Y., Saringer, C., Tkadletz, M., Stark, A., Schell, N., Czettl, C., Pohler, M. & Schalk, N., 2022.

    Research output: Contribution to conference › Poster › Research

  76. Published

    Oxidation resistance of arc-evaporated Cr0.74Ta0.26N coatings

    Kainz, C., Saringer, C., Burtscher, M., Tkadletz, M., Stark, A., Schell, N., Pohler, M., Czettl, C., Kiener, D. & Schalk, N., 2022.

    Research output: Contribution to conference › Poster › Research

  77. Published

    Synthesis and characterization of B1-AlN containing superlattice structures

    Becker, M.-T., 2022

    Research output: Thesis › Master's Thesis

  78. Published

    The micromechanical characterization of silicon up to 950

    Schaffar, G. J. K., Tscharnuter, D., Imrich, P. J. & Maier-Kiener, V., 2022.

    Research output: Contribution to conference › Poster › Research

  79. Published

    TiN/CrN , TiSiN/CrN and NbN/CrN multilayer coatings deposited in an industrial scale HiPIMS system

    Sala Bascompte, N., Rebelo de Figueiredo, M., Franz, R., Kainz, C., Colominas, C. & Abad, M. D., 2022.

    Research output: Contribution to conference › Poster › Research

  80. Published

    Tuning the microstructure of MoNbTaWZr high entropy alloy films by adjusting the HiPIMS parameters

    Gruber, G., Lassnig, A., Žák, S., Gammer, C., Cordill, M. J. & Franz, R., 2022.

    Research output: Contribution to conference › Poster › Research

  81. Published

    ZrN-based hard coatings deposited by chemical and physical vapor deposition

    Frank, F., 2022

    Research output: Thesis › Doctoral Thesis

  82. 2021
  83. Published

    The influence of bias voltage on structure, thermal stability and mechanical properties of arc evaporated Cr0.69Ta0.20B0.11N coatings

    Kainz, C., Pohler, M., Tkadletz, M., Czettl, C. & Schalk, N., 25 Dec 2021, In: Surface & coatings technology. 428.2021, 25 December, 8 p., 127867.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Rapid solidification and metastable phase formation during surface modifications of composite Al-Cr cathodes exposed to cathodic arc plasma

    Golizadeh Najafabadi, M., Mendez Martin, F., Wurster, S., Mogeritsch, J., Kharicha, A., Kolozsvári, S., Mitterer, C. & Franz, R., 20 Dec 2021, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 94:2021, 20 December, p. 147-163 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Influence of the deposition parameters on the nanolamella periodicity of chemical vapor deposited Ti1-xAlxN

    Saringer, C., Tkadletz, M., Thurner, J., Czettl, C. & Schalk, N., 15 Dec 2021, In: Materials letters. 305.2021, 15 December, 4 p., 130819.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Stainless steel reveals an anomaly in thermal expansion behavior of severely deformed materials

    Renk, O., Enzinger, R. J., Gammer, C., Scheiber, D., Oberdorfer, B., Tkadletz, M., Stark, A., Sprengel, W., Pippan, R., Eckert, J., Romaner, L. & Ruban, A., 30 Nov 2021, In: Physical review materials . 5.2021, 11, 113609.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Fracture properties of α– and k–Al2O3 hard coatings deposited by chemical vapor deposition

    Konstantiniuk, F., Tkadletz, M., Czettl, C. & Schalk, N., 4 Nov 2021, In: Coatings. 11.2021, 11, 10 p., 1359.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Anisotropic wet-chemical etching for preparation of freestanding films on Si substrates for atom probe tomography: A simple yet effective approach

    Tkadletz, M., Lechner, A., Pölzl, S. & Schalk, N., Nov 2021, In: Ultramicroscopy. 230, 113402, p. 1-4 113402.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Mechanical properties of CrN-based superlattices: Impact of magnetism

    Löfler, L., Hahn, R., Mayrhofer, P. H., Bartosik, M. & Holec, D., 1 Oct 2021, In: Acta materialia. 218.2021, 1 October, 13 p., 117095.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Cathode spot behavior in nitrogen and oxygen gaseous atmospheres and concomitant cathode surface modifications

    Golizadeh Najafabadi, M., Mendez Martin, F., Kolozsvári, S., Anders, A. & Franz, R., 15 Sept 2021, In: Surface & coatings technology. 421.2021, 15 September, 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Microstructure and mechanical properties of arc evaporated Ti(Al,Si)N coatings

    Moritz, Y., Kainz, C., Tkadletz, M., Czettl, C., Pohler, M. & Schalk, N., 15 Sept 2021, In: Surface & coatings technology. 421.2021, 15 September, 8 p., 127461.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Improved fracture resistance of Cu/Mo bilayers with thickness tailoring

    Cordill, M. J., Jörg, T., Többens, D. & Mitterer, C., Sept 2021, In: Scripta materialia. 202.2021, September, 5 p., 113994.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Morphology of cracks and shear bands in polymer-supported thin film metallic glasses

    Glushko, O., Gammer, C., Weniger, L.-M., Sheng, H., Mitterer, C. & Eckert, J., Sept 2021, In: Materials Today Communications. 28.2021, September, 11 p., 102547.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Flexible nanoporous activated carbon for adsorption of organics from industrial effluents

    Zulfiqar, U., Kostoglou, N., Thomas, A. G., Rebholz, C., Matthews, A. & Lewis, D. J., 27 Aug 2021, In: Nanoscale. 13.2021, 36, p. 15311-15323 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Porosity evolution in organic matter-rich shales (Qingshankou Fm.; Songliao Basin, NE China): Implications for shale oil retention

    Zhang, P., Misch, D., Hu, F., Kostoglou, N., Sachsenhofer, R., Liu, Z., Meng, Q. T. & Bechtel, A., Aug 2021, In: Marine and petroleum geology. 130.2021, August, p. 1-17 17 p., 105139.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Influence of bias voltage on microstructure, mechanical properties and thermal stability of arc evaporated Cr0.74Ta0.26N coatings

    Kainz, C., Pohler, M., Gruber, G., Tkadletz, M., Ebner, A., Czettl, C. & Schalk, N., 15 Jul 2021, In: Surface & coatings technology. 417.2021, 15 July, 8 p., 127212.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Extracting information from noisy data: strain mapping during dynamic in situ SEM experiments

    Alfreider, M., Meindlhumer, M., Maier-Kiener, V., Hohenwarter, A. & Kiener, D., 14 Jun 2021, In: Journal of materials research (JMR). 36.2021, 11, p. 2291-2304 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Additive manufacturing of magnesium alloy using uniform droplet spraying: modeling of microstructure evolution

    Jaffar, S. M., Kostoglou, N., Fukuda, H., Rebholz, C., Ando, T., Liao, Y. & Doumanidis, C. C., Jun 2021, In: MRS Advances. 6, 15, p. 391-403 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    High temperature nanoindentation as a tool to investigate plasticity upon phase transformations demonstrated on Cobalt

    Kappacher, J., Tkadletz, M., Clemens, H. & Maier-Kiener, V., May 2021, In: Materialia. 16.2021, May, 9 p., 101084.

    Research output: Contribution to journal › Article › Research › peer-review

  100. E-pub ahead of print

    Evolution of the microstructure of sputter deposited TaAlON thin films with increasing oxygen partial pressure

    Schalk, N., Saringer, C., Fian, A., Terziyska, V., Julin, J. & Tkadletz, M., 29 Apr 2021, (E-pub ahead of print) In: Surface & coatings technology. 418.2021, 25. July, 7 p., 127237.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Microstructure and Mechanical Properties of ZrN, ZrCN and ZrC Coatings Grown by Chemical Vapor Deposition

    Frank, F., Tkadletz, M., Czettl, C. & Schalk, N., 22 Apr 2021, In: Coatings. 11.2021, 5, p. 1-13 491.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Strength ranking for interfaces between a TiN hard coating and microstructural constituents of high speed steel determined by micromechanical testing

    Gsellmann, M., Klünsner, T., Mitterer, C., Krobath, M., Wurmshuber, M., Leitner, H., Ecker, W., Marsoner, S., Maier-Kiener, V., Kiener, D. & Ressel, G., 31 Mar 2021, In: Materials and Design. 204.2021, June, 11 p., 109690.

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    High temperature fracture toughness of single-layer CrAlN and CrAlSiN hard coatings

    Drnovsek, A., Vo, H., Rebelo de Figueiredo, M., Kolozsvári, S., Hosemann, P. & Franz, R., 15 Mar 2021, In: Surface & coatings technology. 409.2021, 15 March, 7 p., 126909.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben
  • Main phone number: +43 3842 402 4201