Chair of Ferrous Metallurgy (220)

Organisational unit: Chair

451 - 500 out of 1,066Page size: 50

Research output

  1. 2016
  2. Published

    In-situ observation of the behaviour of non-metallic inclusions at different interfaces in the system steel-slag-refractory

    Michelic, S., Salgado, U. D. & Bernhard, C., 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, p. 012010 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    In situ Untersuchung der Keimung von Azikularferrit an nichtmetallischen Einschlüssen in verschiedenen Stahlgüten

    Mayerhofer, A., 2016

    Research output: Thesis › Master's Thesis

  4. Published

    Investigation of metallurgical phenomena related to process and product development by means of High Temperature Confocal Scanning Laser Microscopy

    Diéguez-Salgado, U., Michelic, S. & Bernhard, C., 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Investigation of the influence of the chemical composition of HSLA steel grades on the microstructure homogeneity during hot rolling in continuous rolling mills using a fast layer model

    Schmidtchen, M., Rimnac, A., Warczok, P., Kozeschnnik, E., Bernhard, C., Bragin, S., Kawalla, R. & Linzer, B., 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, p. 12001 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Non-metallic inclusions Acting as Potential Nuclei for Acicular Ferrite in Different Steel Grades

    Mayerhofer, A., Loder, D. & Michelic, S., 2016.

    Research output: Contribution to conference › Poster › Research

  7. Published

    Numerical simulation and experimental validation of the formation of shrinkage cavity during solidification of steel

    Riedler, M., Michelic, S. & Bernhard, C., 2016, Conference Proceedings to the 25th Anniversary International Conference on Metallurgy and Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    On the formation potential of acicular ferrite microstructure in different steel grades focusing on the influence of carbon content

    Loder, D., Mayerhofer, A. & Michelic, S., 2016, Proceedings AISTech 2016. p. 2465-2474

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    On the modelling of microsegregation in steels involving thermodynamic databases

    You, D., Bernhard, C., Michelic, S., Wieser, G. & Presoly, P., 2016, IOP Conference Series: Materials Science and Engineering. Vol. 119. p. 012027 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    On the systematic investigation of acicular ferrite on laboratory scale

    Loder, D., 2016

    Research output: Thesis › Doctoral Thesis

  11. Published

    Optimierung der Prozessparameter für die Reduktion von Feineisenerzen mittels Wirbelschichtverfahren

    Spreitzer, D., 2016

    Research output: Thesis › Master's Thesis

  12. Published

    Production of Jumbo Blooms by Semi-Continuous Casting: Challenges, Feasibility and Future Potential

    Michelic, S. & Riedler, M., 2016, In: Berg- und hüttenmännische Monatshefte : BHM. 5, p. 39-44

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Segment Casting-an attractive alternative to ingot casting

    Krajewski, P., Michelic, S. & Riedler, M., 2016, Conference Proceedings to the 2nd Medovar Memorial Symposium.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Solidification control in casting of heavy ingots by a novel casting process

    Riedler, M., 2016

    Research output: Thesis › Doctoral Thesis

  15. Published

    Statistical optimisation parameter for lean grade self-reducing nuggets by surface response modelling to produce pig iron

    Biswas, C., Samanta, S., Bhattacharyya, A., Ghosh Choudhuri, M. & Dey, R., 2016, In: Transactions of the institutions of mining and metallurgy. Section C, Mineral processing and extractive metallurgy . Transactions of the Institutions of Mining and Metallurgy: Section C, p. 1 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    The influence of manganese on the initial solidification of near-peritectic steel

    Legerer, C., 2016

    Research output: Thesis › Master's Thesis

  17. 2015
  18. Published

    processo e dispositivo para a separação de substância sólidas em formato de partículas de uma corrente de gás

    Johannes, L. S. (Inventor), Norbert, R. (Inventor), Robert, M. (Inventor) & Thomas, E. (Inventor), 15 Dec 2015, IPC No. B01D 50/ 00 A I, Patent No. BRPI0919875, Priority date 29 Sept 2009, Priority No. WO2009EP62605

    Research output: Patent

  19. Published

    método e dispositivo para operação de um processo de redução de fundição

    Johannes, L. S. (Inventor), Kurt, W. (Inventor) & Robert, M. (Inventor), 8 Dec 2015, IPC No. F02C 6/ 00 A I, Patent No. BRPI0919615, Priority date 29 Sept 2009, Priority No. WO2009EP62607

    Research output: Patent

  20. Published

    processo para a produção de aglomerados de condutores de ferro finamente particulados

    Hado, H. (Inventor), Hans, H. S. (Inventor), Johannes, L. S. (Inventor) & Christian, B. (Inventor), 1 Dec 2015, IPC No. C22B 5/ 14 A I, Patent No. BRPI0918140, Priority date 17 Aug 2009, Priority No. WO2009EP60609

    Research output: Patent

  21. Published

    Behavior of Chromium, Nickel, Lead, Zinc, Cadmium, and Mercury in the Blast Furnace - A Critical Review of Literature Data and Plant Investigations

    Trinkel, V., Mallow, O., Thaler, C., Schenk, J., Rechberger, H. & Fellner, J., 19 Nov 2015, In: Industrial and engineering chemistry research. 54, 47, p. 11759-11771 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Evaluation of the capabilities of direct and smelting reduction processes to enhance the energy efficiency of the steel production in Europe

    Schenk, J., 12 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  23. Published

    Wasserstoff als Reduktionsmittel für die Eisen‐ und Rohstahlerzeugung – Ist‐Situation, Potentiale und Herausforderungen

    Schenk, J., 11 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  24. Published

    aparelho para remover o co2 dos gases de exaustão de usinas para produção de ferro gusa.

    Johannes, L. S. (Inventor) & Robert, M. (Inventor), 3 Nov 2015, IPC No. C21B 13/ 00 A I, Patent No. BR212012005399U, Priority date 6 Sept 2010, Priority No. WO2010EP63023

    Research output: Patent

  25. Published

    Thermodynamic optimization of individual steel databases by means of systematic DSC measurement

    Presoly, P., Six, J. & Bernhard, C., 3 Nov 2015, International Conference on Materials, Processing and Product Engineering. Leoben, 8 p. 29

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Untersuchung des Auflöseverhaltens oxidischer Einschlüsse in CaO-Al2O3-SiO2-MgO Schlacken mittels Hochtemperatur-Laser-Scanning Konfokalmikroskopie

    Michelic, S., Goriupp, J., Feichtinger, S., Kang, Y.-B., Bernhard, C. & Schenk, J., 2 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  27. Published

    método para o controle de um processo de transformação

    Bernhard, H. S. (Inventor), Franz, W. (Inventor), Harald, F. (Inventor), Heinrich, R. M. (Inventor), Johannes, L. S. (Inventor), Kurt, W. (Inventor) & Stefan, S. (Inventor), 27 Oct 2015, IPC No. C21B 5/ 00 A I, Patent No. BRPI0915069, Priority date 7 May 2009, Priority No. WO2009EP55545

    Research output: Patent

  28. Published

    Effect of variable process conditions on the reactivity, strength and structural features of blast furnace cokes

    Bhattacharyya, A., Rantitsch, G., Schenk, J., Thaler, C. & Stocker, H., 5 Oct 2015, p. 606-607.

    Research output: Contribution to conference › Paper › peer-review

  29. Published

    Kinetics of lime dissolution in steelmaking slags

    Cheremisina, E., Schenk, J., Tappeiner, T., Sormann, A. & Wimmer, G., 5 Oct 2015, Asia Steel International Conference 2015 Proceedings. 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    CHALLENGES AND LIMITING FACTOS FOR THE RECYCLING OF STEEL SCRAP IN EUROPE

    Bundschuh, P. & Schenk, J., 1 Oct 2015, MINING THE TECHNOSPHERE: "Drivers and Barriers, Challenges and Opportunities". Lederer, J., Laner, D., Rechberger, H. & Fellner, J. (eds.). 1 ed. Wien, Vol. 1. p. 131-135 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Contribution of the Chair of Ferrous Metallurgy at the Montanuniversitaet Leoben to Enhance the Sustainability of Steel Production and Application

    Schenk, J., Bernhard, C. & Michelic, S., Oct 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 10, p. 489-494

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Reduction Behavior and Structural Evolution of Iron Ores in Fluidized Bed Technologies. Part 1: Method for the Determination

    Skorianz, M., Mali, H., Pichler, A., Plaul, F., Schenk, J. & Weiss, B., 28 Sept 2015, In: Steel research international. 87, 5, p. 633-641 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    A numerical solidification model as link between laboratory experiments and the continuous casting process

    Riedler, M., Arth, G., Bernhard, C., Presoly, P., You, D. & Ilie, S., 24 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  34. Published

    Formation of shrinkage porosity during solidification of steel: Numerical simulation and experimental validation

    Riedler, M., Michelic, S. & Bernhard, C., 23 Sept 2015, Proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Production of Jumbo Blooms by Semi-Continuous Casting: Challenges, Feasibility and Future Potential

    Michelic, S. & Riedler, M., 23 Sept 2015, Proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    In-situ observation of the behavior of non-metallic inclusions at different interfaces in the system steel-slag-refractory

    Michelic, S., Dieguez Salgado, U. & Bernhard, C., 21 Sept 2015, LMPC 2015: Proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting. p. 143-152 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    On the importance of thermodynamic investigations for the re-assessment of selected ternary Fe-base systems

    Presoly, P. & Bernhard, C., 20 Sept 2015, Proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting. Leoben, Vol. 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Charakterisierung von Eisenerzträgern mittels Bildverarbeitung

    Kain - Bückner, B., Hanel, M. & Mali, H., 10 Sept 2015, Mitt. Österr. Miner. Ges..

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  39. Published

    Fabrication of plain carbon steel/high chromium white cast iron bimetal by a liquid–solid composite casting process

    Javaheri, V., Rastegari, H. & Naseri Seftejani, M., Sept 2015, In: International Journal of Minerals, Metallurgy and Materials. p. 950-955 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. E-pub ahead of print

    A Novel Devolatilization Technique of Pre-reduction of Iron Ore Using Lean Grade Coal

    Biswas, C., Bhattacharyya, A., Das, G. C., Ghosh Choudhuri, M. & Dey, R., 20 Aug 2015, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 161.2016, 3, p. 95-101 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    MODEL DEVELOPMENT OF ADDITIVES DISSOLUTION IN THE BOF PROCESS

    Godinho de Carvalho, D. A., Schenk, J. & Adilson Castro, J., 17 Aug 2015, Conference Proceedings ABM Week, August 17th-21st, 2015, Rio de Janeiro, RJ, Brazil.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Analysis of Solidification of High Manganese Steels Using Improved Differential Thermal Analysis Method

    Zhuang, C., Liu, J., Bernhard, C. & Presoly, P., 1 Aug 2015, In: Journal of iron and steel research international. 22, 8, p. 709-714 6 p., 8.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Characterization of Ferrous Burden Material for Use in Ironmaking Technologies/Charakterisierung stuckiger Eisentrager fur den Einsatz in der Eisenerzeugung

    Hanel, M., Schenk, J. F., Mali, H., Hauzenberger, F., Thaler, C. M. & Stocker, H., 1 Jul 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 7, p. 316-319 4 p.

    Research output: Contribution to journal › Article › Research

  44. Published

    Untersuchung der Wirkung von Legierungselementen auf die peritektische Phasenumwandlung in Stählen

    Presoly, P. & Bernhard, C., Jul 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 07, p. 337-341 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Gas Purging Benefits in the BOF: A Focus on Material Efficiency and CO2 Emission Reduction

    Kollmann, T., Bundschuh, P., Samm, V., Schenk, J. & Kirschen, M., 17 Jun 2015, Procdeedings 2nd European Steel Technology and Application Days ESTAD. Düsseldorf, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Experimental und numerical investigations on cooling efficiency in the secondary cooling zone during continuous casting of steel

    Arth, G., Taferner, M. & Bernhard, C., 16 Jun 2015. 7 p.

    Research output: Contribution to conference › Paper

  47. Published

    Simulation des Strangrichtens in einem In-Situ Biegeversuch

    Krobath, R., 19 May 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Effect of Interaction Area on the Thermodynamics and Kinetic Modelling of BOF Converter

    Bundschuh, P., Schenk, J., Schütt, S., Sormann, A. & Panhofer, H., 12 May 2015, Proceedings of The 6th International Congress on the Science and Technology of Steelmaking. p. 151 - 154 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Technologies for Low Carbon Fe-Mn-Si-Al TWIP Steel Smelting

    Liu, J., Liu, H. & Michelic, S., 12 May 2015.

    Research output: Contribution to conference › Poster › Research

  50. Published

    Chemistry vs. Morphology vs. Reducibility — Some (Non-) Existing Correlations

    Hanel, M., Kain-Bückner, B., Schenk, J., Mali, H., Hauzenberger, F., Thaler, C. & Stocker, H., 4 May 2015, AISTech 2015 & ICSTI Proceedings. p. 593-602 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Experimental Analysis of the Interfacial Wetting Phenomena Between Slag and Coke Surface Under Simulated Conditions of the Bosh Region of Blast Furnace

    Bhattacharyya, A., Schenk, J., Arth, G., Stocker, H. & Thaler, C., 4 May 2015, AISTech 2015 & ICSTI Proceedings. p. 713-721 077_30431-5159

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Gas Purging Benefits in the BOF: A Focus on Material Efficiency and CO2 Emission Reduction

    Kollmann, T., Bundschuh, P., Samm, V. & Kirschen, M., 4 May 2015, AISTech 2015 & ICSTI Proceedings. p. 2031 - 2040 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...6 7 8 9 10 11 12 13 ...22 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 2201