Chair of Ferrous Metallurgy (220)

Organisational unit: Chair

301 - 350 out of 1,066Page size: 50

Research output

  1. 2019
  2. Published

    Thermodynamic Model of Ion-Exchange Process as Exemplified by Cerium Sorption from Multisalt Solutions

    Cheremisina, O. V., Schenk, J., Cheremisina, E. A. & Ponomareva, M. A., 1 Jan 2019, In: Journal of Mining Institute. 237.2019, p. 307-316 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Bedeutung des Reinheitsgrads für die Zerspanungseigenschaften ausgewählter Stahlsorten

    Maunz, M., 2019

    Research output: Thesis › Master's Thesis

  4. Published

    Charakterisierung der Spritzwasserkühlung in der Sekundärkühlzone einer Brammenstranggießanlage

    Preuler, L., 2019

    Research output: Thesis › Doctoral Thesis

  5. Published

    Ein Studium über die Krustenbildung im Meniskus in der Kokille beim Stranggießen

    Li, T., 2019

    Research output: Thesis › Master's Thesis

  6. Published

    Evaluation of AHSS concepts with a focus on the product properties and appropriate casting characteristics of Arvedi ESP thin slab casters

    Bernhard, C., Linzer, B., Presoly, P., Watzinger, I. & Watzinger, J., 2019, In: IOP Conference Series: Materials Science and Engineering. 529.2019, 012071, p. 1-10 10 p., 012071.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Experimental research and mathematical modelling of the melting and dissolution behaviour of scrap in liquid hot metal

    Penz, F., 2019

    Research output: Thesis › Doctoral Thesis

  8. Published

    Investigation of water droplet impingement under conditions of the secondary cooling zone of a continuous slab caster

    Preuler, L., Peyha, M., Weiß, C., Bernhard, C. & Ilie, S., 2019, AISTech - Iron and Steel Technology Conference Proceedings. Vol. 2019-May. p. 1441-1449 9 p. (AISTech - Iron and Steel Technology Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  9. Published

    KIC RawMaterials: Iron Balance—Austria

    Wolfinger, T., Spreitzer, D., Zarl, M., Pichler, A. & Schenk, J., 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 4, p. 183 - 187 5 p.

    Research output: Contribution to journal › Article › Research

  10. Published

    Microstructural Evolution of Blast Furnace Coke During Experimental Heating —The IFORS Approach

    Rantitsch, G., Bhattacharyya, A. & Schenk, J., 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 2019, 130, p. 1 - 4 4 p.

    Research output: Contribution to journal › Article › Research

  11. Published

    Modeling of the secondary refining process of steel

    You, D., Michelic, S. K. & Bernhard, C., 2019.

    Research output: Contribution to conference › Presentation › Research › peer-review

  12. Published

    Thermodynamische Modellierung des Betriebs von Direktreduktionsanlagen mit maximalem Anteil an Wasserstoff

    Baumgartner, H.-J., 2019

    Research output: Thesis › Master's Thesis

  13. Published

    The role of FeTi-addition on micro-inclusions in the production of ULC steel grades via RH-process route

    Bernhard, C., Dorrer, P., Michelic, S. K. & Rössler, R., 2019, Proceedings of the 4th European Steel Technology and Application Days (ESTAD). 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Untersuchungen zur Oberflächenrissbildung beim Stranggießen von Stahl

    Krobath, R., 2019

    Research output: Thesis › Doctoral Thesis

  15. Published

    Validation of AlN precipitation modelling results by in-situ austenite grain growth observations

    Schnalzger, M., 2019

    Research output: Thesis › Master's Thesis

  16. 2018
  17. Published

    Dissolution of Scrap in Hot Metal under Linz-Donawitz (LD) Steelmaking Conditions

    Penz, F. M., Schenk, J., Ammer, R., Kloesch, G. & Pastucha, K., 18 Dec 2018, In: Metals : open access journal . 8.2018, 1078, 9 p., 1078.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Thermodynamic of Liquid Iron Ore Reduction by Hydrogen Thermal Plasma

    Naseri Seftejani, M. & Schenk, J., 11 Dec 2018, In: Metals : open access journal . 8, 12, 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Abrasiveness of mining slurries: influence of the morphology, concentration of slurries, mean grain size and nature of the abrasive particles

    Moreira, V. E. S., Silva, F. C., Quintao, V. M., Siqueira, F., Kaelber, F., Meinhold, S., Schenk, J. & Rodrigues da Costa, A., 3 Dec 2018.

    Research output: Contribution to conference › Paper › peer-review

  20. Published

    Dissolution behaviour of ULC steel in carbon saturated hot metal

    Penz, F. M., Schenk, J., Ammer, R., Pastucha, K. & Maunz, B., Dec 2018, In: Metallurgia Italiana. 110.2018, 11-12, p. 36-45 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Influence of Iron Minerals on the Volume, Strength, and CO2 Gasification of Ferro-coke

    Xu, R., Zheng, H., Wang, W., Schenk, J. & Xue, Z., Dec 2018, In: Energy and Fuels. 32, 12, p. 12118-12127

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Slag characterisation of 308L-type stainless steel rutile flux-cored wires

    Holly, S., Mayer, P. M., Bernhard, C. & Posch, G., 30 Nov 2018, In: Welding in the world. 63, p. 293-311

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Experimental determination of the strength and reactivity of lumpy and briquetted chars from non-coking coals under melter-gasifier conditions

    Bhattacharyya, A., Schenk, J. & Heckmann, H., 26 Nov 2018, In: Ironmaking and steelmaking. 45, 10, p. 907-912

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Freisetzungsbestimmende Mechanismen von Schwermetallen in Stahlwerksschlacken - Analyse, Modellierung, Synthesen

    Neuhold, S. F., Vollprecht, D., Presoly, P., Schenk, J. & Adamczyk, B., 7 Nov 2018, Recy & DepoTech 2018: Vorträge-Konferenzband. Leoben, p. 135-140 122

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Neuartige Zweistoffdüsen steigern die Energieeffizienz der Sekundärkühlung

    Wolff, R., Frick, J., Bernhard, C. & Taferner, M., 7 Nov 2018, In: Stahl und Eisen. 2018, 138, p. 111-114

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Transport Properties of HPSR Gases

    Naseri Seftejani, M. & Schenk, J., 24 Oct 2018, The Chinese Society for Metals.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Influence of casting temperature on the microstructure of AISI M42 high speed steel

    Baumgartner, K., Bernhard, C., Pfeiffer, A., Wieser, G. & Hafok, M., 18 Oct 2018, Ingot rolling, casting, forging 2018. p. 321 - 329 ICRF-173

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Experimental Investigation of the System Nonmetallic Inclusion-Molten Steel-Refractory System at High Temperatures

    Diéguez Salgado, U., Dorrer, P., Michelic, S. K. & Bernhard, C., Oct 2018, In: Journal of Materials Engineering and Performance. 27, 10, p. 4983-4988 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Guest Editorial - EUROMAT 2017 Symposia on Processing

    Kaban, I., Agathopoulos, S., Valenza, F., Sommitsch, C., Schenk, J., Papaefthymiou, S. & Karantzalis, A., Oct 2018, In: Journal of Materials Engineering and Performance. 27.2018, 10, p. 4981-4982

    Research output: Contribution to journal › Editorial › peer-review

  30. Published

    Effect of the Particle Size of Iron Ore on the Pyrolysis Kinetic Behaviour of Coal-Iron Ore Briquettes

    Zheng, H., Wang, W., Xu, R., Zan, R., Schenk, J. & Xue, Z., 29 Sept 2018, In: Energies : open-access journal of related scientific research, technology development and studies in policy and management. 11, 10, 16 p., 2595.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    THERMODYNAMIC ASPECTS OF HYDROGEN PLASMA SMELTING REDUCTION OF IRON OXIDES

    Naseri Seftejani, M. & Schenk, J., 20 Sept 2018, Austrian Society for Metallurgy and Materials: ASMET. ASMET

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    An alternative approach for the experimental verification of microsegregation models using an in-situ hot tensile test during solidification of steel

    Bernhard, M. C., Presoly, P., Bernhard, C. & You, D., 3 Sept 2018, Proceedings of the 7th International Conference on Solidification and Gravity 2018. Miskolc-Lillafüred, Hungary

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    High concentrations at the final solidification of advanced steels: Thermodynamic evaluation of replicated “segregation-samples” by means of DTA/DSC-measurements

    Presoly, P., Bernhard, M. C., You, D. & Bernhard, C., 3 Sept 2018, Solidification and Gravity VII. p. 138-143

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    MICROSTRUCTURAL EVOLUTION OF BLAST FURNACE COKE DURING EXPERIMENTAL HEATING – THE IFORS APPROACH

    Rantitsch, G., Bhattacharyya, A. & Schenk, J., Sept 2018, Proceedings of 8th International Congress on Science and Technology of Ironmaking.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    STRUCTURAL CHARACTERIZATION OF COKE FROM THE TUYERE REGION OF THE BLAST FURNACE

    Bhattacharyya, A., Rantitsch, G., Schenk, J., Janhsen, U. & Guenbati, A., Sept 2018, Proceedings of 8th International Congress on Science and Technology of Ironmaking.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Fluid Force-Induced Detachment Criteria for Nonmetallic Inclusions Adhered to a Refractory/Molten Steel Interface

    Dieguez Salgado, U., Weiß, C., Michelic, S. K. & Bernhard, C., 1 Aug 2018, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 49, 4, p. 1632-1643 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Kinetics of molten iron oxides reduction using hydrogen

    Naseri Seftejani, M. & Schenk, J., Jul 2018, In: Metallurgia Italiana. n. 7/8 2018, 0026-0843, p. 5-14 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    DISSOLUTION BEHAVIOUR OF ULC STEEL IN CARBON SATURATED HOT METAL

    Penz, F. M., Schenk, J., Ammer, R., Pastucha, K. & Maunz, B., 13 Jun 2018, p. ICS070. 12 p.

    Research output: Contribution to conference › Paper › peer-review

  39. Published

    Formation of multi-type inclusions during the cooling and solidification of steel: A trend model

    You, D., Michelic, S. K. & Bernhard, C., 13 Jun 2018, In: Metals : open access journal . 8, 6, 452.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    The way to a carbon free steelmaking

    Sormann, A., Schenk, J., Naseri Seftejani, M., Zarl, M. A. & Spreitzer, D., 10 Jun 2018.

    Research output: Contribution to conference › Paper › peer-review

  41. Published

    Modelling the dependence of sinter bed permeability on sinter porosity and structure

    Höftberger, A., Bhattacharyya, A., Schenk, J., Weiß, C., Schaffer, C. & Schuster, E., Jun 2018, Proceedings of ADMET 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Investigation of the Fe-C-Si-Mn system with special focus on the Fe – 3 wt.-% Si – high Mn section

    Presoly, P., Bernhard, M. C. & Bernhard, C., 30 May 2018, CALPHAD XLVII - Conference Program. p. 50

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Characterization of Ironmaking Raw Materials Using Computed Tomography

    Bhattacharyya, A., Schenk, J., Habe, D. & Oberdorfer, B., May 2018, AISTECH 2018 Proceedings. p. 211 216 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Evolution of Metallurgical Properties and Microstructures of Lump Coal During the Descending Process in COREX Gasifier

    Xu, R., Zheng, H., Wang, W., Schenk, J., Bhattacharyya, A., Xue, Z. & Song, M., 18 Apr 2018, In: International journal of coal preparation and utilization. p. 1-17 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Investigation of the content hexavalent chromium occurred in slags during steel making process

    Cheremisina, E. & Schenk, J., 1 Apr 2018, In: Ćernye metally : dvuchnedel'nyj proizvodstvenno-techničeskij žurnal po problemam černoj metallurgii . 4, p. 11-12 2 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Gasification Reactivity and Structure Evolution of Metallurgical Coke under H2O/CO2 Atmosphere

    Xu, R., Dai, B., Wang, W., Schenk, J., Bhattacharyya, A. & Xue, Z., 15 Feb 2018, In: Energy and Fuels. 32, 2, p. 1188-1195 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Fundamentals of hydrogen plasma smelting reduction (HPSR) of iron oxides, a new generation of steelmaking processes

    Naseri Seftejani, M. & Schenk, J., 6 Feb 2018.

    Research output: Contribution to conference › Paper › peer-review

  48. Published

    Analysis of the Alkali Flow in Ironmaking Reactors by a Thermochemical Approach: Blast Furnace

    Pichler, A., Hauzenberger, F., Schenk, J., Stocker, H. & Thaler, C., 1 Feb 2018, In: Steel research international. 89, 2, 1700303.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Effect of iron ore type on the thermal behaviour and kinetics of coal-iron ore briquettes during coking

    Xu, R., Dai, B., Wang, W., Schenk, J. & Xue, Z., 12 Jan 2018, In: Fuel Processing Technology. 173.2018, May, p. 11-20 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Dissolution rate of various MgO materials in steel and secondary metallurgy slags

    Cheremisina, E., Schenk, J., Viertauer, A., Nilica, R. & Roessler, R., 1 Jan 2018, AISTech 2018 Proceedings - Iron and Steel Technology Conference and Exposition. Association for Iron and Steel Technology, AISTECH, Vol. 2018-May. p. 1103-1115 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Kinetics of hydrogen plasma smelting reduction of iron oxides

    Seftejani, M. N. & Schenk, J., 1 Jan 2018, ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0. Associazione Italiana di Metallurgia

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Bestimmung der Korrelation zwischen Oxidation und Reduktion von magnetitischem Eisenerzkonzentrat

    Wolfinger, T., 2018

    Research output: Thesis › Master's Thesis

Previous 1...3 4 5 6 7 8 9 10 ...22 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 2201