Chair of Ferrous Metallurgy (220)

Organisational unit: Chair

801 - 850 out of 1,066Page size: 50

Research output

  1. 2009
  2. Published

    Experimentelle Untersuchungen über das Aluminium-Sauerstoff-Gleichgewicht in Eisen-Mangan-Schmelzen bei 1600°C

    Goriupp, J., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  3. Published

    FINEX - Ein Wunschtraum der Eisen- und Stahlindustrie wurde Wirklichkeit

    Schenk, J., 2009, In: Scale up. p. 8-9

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Influence of heat treatment on the microstructure and toughness of din 1.2083 - type plastic mould steels

    Perko, J., Leitner, H., Strobl, V., Schneider, R. & List, M., 2009, Proceedings of the 8th International Tooling Conference. p. 597-609

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Interfacial Propperties in Metallurgy

    Karasangabo, A., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  6. Published

    Investigation of Decarbuization in Spring Steel Production Process-Part I: Experiments

    Dejun, L., Anghelina, D., Burzic, D., Zamberger, J., Kienreich, R., Schifferl, H., Krieger, W. & Kozeschnik, E., 2009, In: Steel research international. 4, p. 298-303

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Investigation of Decarburization in Spring Steel Production Process - Part I: Experiments

    Dejun, L., Anghelina, D., Burzic, D., Zamberger, J., Kienreich, R., Schifferl, H., Krieger, W. & Kozeschnik, E., 2009, In: Steel research international. 80, p. 298-303

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Investigation of Decarburization in Spring Steel Production Process - Part II: Simulation

    Dejun, L., Burzic, D., Anghelina, D., Krieger, W. & Kozeschnik, E., 2009, In: Steel research international. 80, p. 304-310

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Metallurgische Herausforderungen neuer Legierungskonzepte am Beispiel von Induced Plasticity (IP)-Stählen

    Wiener, J., Gigacher, G., Penz, S. & Bernhard, C., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 154, p. 33-39

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Modelling and Experiments on Kinetics of Atmosphere Purification by Argon Purging in a High Temperature Apparatus

    Karasangabo, A. & Anghelina, D., 2009, In: Metalurgia international. XIV, p. 5-11

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Modelling Solidification in Continuous Casting: Algorithms and Boundary Conditions

    Michelic, S., Bernhard, C., Rauter, W., Erker, M. & Sormann, A., 2009, Modelling Solidification in Continuous Casting: Algorithms and Boundary Conditions. ASMET, p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Neue Schlackentechnologie zur Herstellung hoch stickstofflegierter Stähle im Druck-Elektroschlackeumschmelzverfahren

    Hasenhündl, R., 2009, 125 p.

    Research output: Thesis › Doctoral Thesis

  13. Published

    Nichtmetallische Einschlüsse in der Sekundärmetallurgie

    Wiener, J., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    Nitridische nichtmetallische Einschlüsse in hoch manganhaltigen Stählen

    Wiener, J., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Numerische Simulation von Gießprozessen

    Michelic, S., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    Projektvorstellung: „Physical and numerical modelling of phase changes during and immediately after solidification of critical steel grades” - Visionen & experimentelle Möglichkeiten

    Presoly, P., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    Reinheitsgrad beim ESU-Prozess

    Michelic, S., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    Sekundärmetallurgie hoch manganhaltiger Stähle

    Wiener, J., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    Systematische Untersuchung des Verhaltens nichtmetallischer Einschlüsse in sekundärmetallurgischen Prozessschritten

    Werl, R., 2009

    Research output: Thesis › Master's Thesis

  20. Published

    Technisch-wirtschaftliche Betrachtung einer Elektroden-Stub-Schweißverbindung für ESU-Anlagen

    Schneeberger, G., 2009, 85 p.

    Research output: Thesis › Master's Thesis

  21. Published

    Über die Bildung von Heißrissseigerungen in Stahl: Metallographische Analyse und Charakterisierung

    Pierer, R., Griesser, S., Reiter, J. & Bernhard, C., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 154, p. 346-353

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Untersuchung der Fehlerbildung während der Anfangserstarrung von Fe-Ni und Fe-Ni-Cr Legierungen

    Hanel, M., 2009

    Research output: Thesis › Master's Thesis

  23. Published

    Vergleich zweier druckaufgestickter, korrosionsbeständiger Stähle unterschiedlicher Herstelltechnologie

    Hammer, M., 2009, 172 p.

    Research output: Thesis › Master's Thesis

  24. Published

    Wetting and Interfacial Reaction Investigations of Iron-Based Alloys/Alumina Systems by Means of the Sessile Drop Shape Analysis Method

    Karasangabo, A., 2009

    Research output: Thesis › Doctoral Thesis

  25. 2008
  26. Published

    Verfahren zur Herstellung eines Stahlbandes

    Bernhard, C. (Inventor), Eckerstorfer, G. (Inventor), Hohenbichler, G. (Inventor) & Linzer, B. (Inventor), 15 Oct 2008, Patent No. A 1593/2006

    Research output: Patent

  27. Published

    Method for reducing a particulate material containing a metal, especially iron ore

    Konstantin, M. (Inventor), Johann, R. (Inventor), Siegfried, Z. (Inventor), Hanspeter, O. (Inventor), Johannes, S. (Inventor) & Leopold, W. K. (Inventor), 29 May 2008, IPC No. C21B 13/ 14 A I, Patent No. AU2002331402B, Priority date 28 Aug 2002, Priority No. WO2002AT00254

    Research output: Patent

  28. Published

    Method and device for producing molten material

    Robert, M. (Inventor), Bogdan, V. (Inventor), Johann, W. (Inventor), Norbert, R. (Inventor), Kurt, W. (Inventor), Franz, H. (Inventor), Johannes, S. (Inventor) & Martin, S. (Inventor), 24 Apr 2008, IPC No. C21B 13/ 14 A I, Patent No. AU2007312665, Priority date 1 Oct 2007, Priority No. WO2007EP08514

    Research output: Patent

  29. Published

    Method and device for producing molten material

    Wieder, K. (Inventor), Schenk, J. (Inventor), Bogdan, V. (Inventor), Martin, S. (Inventor), Wurm, J. (Inventor), Millner, R. (Inventor), Hauzenberger, F. (Inventor), Rein, N. (Inventor), Kurt, W. (Inventor), Schenk, J. (Inventor), Bogdan, V. (Inventor), Martin, S. (Inventor), Johann, W. (Inventor), Robert, M. (Inventor), Hauzenberger, F. (Inventor) & Rein, N. (Inventor), 24 Apr 2008, IPC No. C21B 13/ 00 A I, Patent No. AU2007312666, Priority date 1 Oct 2007, Priority No. WO2007EP08515

    Research output: Patent

  30. Published

    A model for predicting the austenite grain size at the surface of continuously cast slabs

    Bernhard, C., Reiter, J. & Presslinger, H., 2008, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 39, p. 885-895

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Analyse der Einschlusslandschaft von hochlegierten Stählen vor und nach dem Umschmelzen - Zwischenbericht

    Penz, S., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    Analyse und Adaption des Heißzugversuches zur Beschreibung des Umformverhaltens von Super-Duplexwerkstoffen

    Herzer, H., 2008

    Research output: Thesis › Diploma Thesis

  33. Published

    Austenite grain size in the continuous casting process: Metallographic methods and evaluation

    Reiter, J., Bernhard, C. & Presslinger, H., 2008, In: Materials characterization. 59, p. 737-746

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Auswahl eines Härtemittels zur Herstellung perlitischer und bainitischer Schienen und Ermittlung der optimalen Prozessparameter

    Vanovsek, W., 2008

    Research output: Thesis › Master's Thesis

  35. Published

    Berechnungsmöglichkeiten für die Wärmeleitfähigkeit von Stahl

    Babilli, Z., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  36. Published

    Characterisation of Nonmetallic Inclusions by Automated SEM/EDX Analyses

    Penz, S., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Characterization of hot tear segregations in continuous casting of slabs

    Ilie, S., Reiter, J., Presslinger, H., Fluch, J. & Bernhard, C., 2008, 6th European Conference on Continuous Casting 2008. p. -Paper -122

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Determination of reservoir model from well test data, using an artificial neural network

    Kharrat, R. & Razavi, S. M., 2008, In: Scientia Iranica. 15, 4, p. 487-493 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Dokumentation und Bewertung der Raffinations-Phase und der Vakuumkohlenstoffdesoxidation im VIDP

    Presoly, P., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  40. Published

    Einfluss von Gießspiegelschwankungen auf den makroskopischen Reinheitsgrad

    Roppl, P., 2008

    Research output: Thesis › Master's Thesis

  41. Published

    Electrical Conductivity and corresponding Specific Energy Consumption of new MgO-containing ESR-slags

    Presoly, P., Korp, J. & Schneider, R., 2008, In: Archives of metallurgy and materials. 53, p. 567-574

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Evaluation of Solution Algorithms for Modelling Solidification Processes

    Michelic, S., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Experimentelle Bestimmung der spezifischen elektrischen Leitfähigkeit hoch CaF2-haltiger Schlacken (Teil II: Ergebnisse aus Labor und industrieller Praxis)

    Korp, J., Schneider, R., Presoly, P. & Krieger, W., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 175-181

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Fluidized-bed technology for the production of iron products for steelmaking

    Plaul, F., Böhm, C. & Schenk, J., 2008, Proceedings IFSA 2008. p. 334-346

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Heat Transfer in a Round CC Mould: Measurement, Modelling and Validation

    Michelic, S., Rauter, W., Erker, M., Brandl, W. & Bernhard, C., 2008, 6th European Continuous Casting Conference. Associazione Italiana di Metallurgia, p. Paper-30

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Improvement of the Characterisation of Nonmetallic Inclusions Especially Focusing on High Purity Steels

    Penz, S., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Klassifizierung von Oberflächenfehlern an überwalztem Knüppelmaterial mittels einer optischen Rissprüfanlage (SIAS - Surface Inspection Automated System)

    Krumphals, A., 2008

    Research output: Thesis › Master's Thesis

  48. Published

    Limiting Steps in Multistage Iron Ore Fines Reduction with H2-rich Gases in Fluidized Beds at Elevated Pressure

    Sturn, J., Weiss, B., Winter, F. & Schenk, J., 2008, Proceedings of the 9th International Conference on Circulating Fluidized Beds. p. 47-53

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Metallurgische Grundlagen als Basis zur Entwicklung alternativer Schweißzusatzwerkstoffe im Pipelinebau

    Fiedler, M. S., 2008

    Research output: Thesis › Doctoral Thesis

  50. Published

    Metallurgische Grundlagen als Basis zur Entwicklung von alternativen Schweißzusatzwerkstoffen im Pipelinebau

    Fiedler, M., Krieger, W. & Klagges, W., 2008, In: Schweiß- & Prüftechnik. p. 67-70

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Metallurgische Untersuchungen zur Ermittlung alternativer Wege zur Herstellung eines Vorsinterproduktes für Weichferrite

    Wolfmeir, H., 2008

    Research output: Thesis › Doctoral Thesis

  52. Published

    On the influence of carbon on secondary dendrite arm spacing in steel

    Pierer, R. & Bernhard, C., 2008, In: Journal of materials science. p. 6938-6943

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...13 14 15 16 17 18 19 20 ...22 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 2201