Chair of Designing Plastics and Composite Materials (250)
Organisational unit: Chair
Research output
- 2019
- Published
Finite Element Models Describing the Failure in Steel Cable Reinforced Rubber Composites
Frankl, S. M., 3 Sept 2019.Research output: Contribution to conference › Abstract
- E-pub ahead of print
Impact Optimization of 3D‐Printed Poly(methyl methacrylate) for Cranial Implants
Petersmann, S., Spoerk, M., Huber, P., Lang, M., Pinter, G. & Arbeiter, F., 30 Aug 2019, (E-pub ahead of print) In: Macromolecular materials and engineering. 304.2019, 11, 10 p., 1900263.Research output: Contribution to journal › Article › Research › peer-review
- Published
Finite element model to describe crack deflection and constrained micro-cracking
Tauscher, M., Pletz, M., Arbeiter, F. & Schuecker, C., 28 Aug 2019, p. 371-374. 4 p.Research output: Contribution to conference › Paper
- Published
Optimization of the specimen geometry of unidirectional reinforced composites with a fibre orientation of 90° for tensile, quasi-static and fatigue tests
Schneider, C., Drvoderic, M., Schuecker, C. & Pinter, G., 28 Jun 2019, 22nd Symposium on Composites. Hausmann, J. M. (ed.). Trans Tech Publications, p. 594-597 4 p. (Key Engineering Materials; vol. 809 KEM).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Investigation of deformation mechanisms in manganese steel crossings using FE models
Wiedorn, J., Daves, W., Ossberger, U., Ossberger, H. & Pletz, M., 13 Jun 2019, In: Tribology International. 138.2019, October, p. 424-434 11 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
FE-Modelle zur Vorhersage des Versagens in stahlseilverstärkten elastomeren Fördergurten
Frankl, S. M., 25 Apr 2019.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Kombinierte Struktur- und Materialoptimierung
Lang, M. C., 25 Apr 2019.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Real-Time Measurement of Dynamic Wheel-Rail Contacts Using Ultrasonic Reflectometry
Zhou, L., Brunskill, H., Pletz, M., Daves, W., Scheriau, S. & Lewis, R., 16 Apr 2019, In: Journal of Tribology. 141.2019, 6, 9 p., 061401.Research output: Contribution to journal › Article › Research › peer-review
- Published
Fatigue characterization of embedded layers in CFR Composites: Fatigue Design 2019, International Conference on Fatigue Design, 8th Edition
Schneider, C., Drvoderic, M., Pinter, G., Schuecker, C. & Gaier, C., 1 Jan 2019, In: Procedia Structural Integrity. 19, p. 370-379 10 p.Research output: Contribution to journal › Conference article › peer-review
- Published
Damage and Failure in Layered Composite Structures
Pettermann, H. E. & Schuecker, C., 2019, Altenbach H., Öchsner A. (eds) Encyclopedia of Continuum Mechanics. Springer BerlinResearch output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer › peer-review
- Published
Entwicklung eines FEM Modellierungsansatzes zur Beschreibung des Verformungsverhaltens von geflochtenen Kunststoffseilen
Fimbinger, N., 2019Research output: Thesis › Master's Thesis
- Published
Evaluation of crack initiation from pores in layered materials using a coupled stress-energy criterion
Schuecker, C., Shevchuk, M., Drvoderic, M. & Pletz, M., 2019.Research output: Contribution to conference › Abstract › peer-review
- Published
Evaluierung mikromechanischer Methoden hinsichtlich praktischer Anwendbarkeit für faserverstärkte Kunststoffe
Schipfer, C., 2019Research output: Thesis › Master's Thesis
- Published
Finite element model for predicting the initiation of subsurface damage in railway crossings—A parametric study
Wiedorn, J., Daves, W., Ossberger, U., Ossberger, H. & Pletz, M., 2019, In: Proceedings of the Institution of Mechanical Engineers. Part F, Journal of rail and rapid transit. 2019, 6, p. Pages 614-628Research output: Contribution to journal › Article › Research › peer-review
- Published
Mechanical Characterization of PMMA Produced by Fused Filament Fabrication as a Potential Material for Cranial Bone Reconstruction
Petersmann, S., Spörk, M., Lang, M. C., Moser, C., Pinter, G. G. & Arbeiter, F., 2019, Abstract Book of the First European Conference on Structural Integrity of Additively Manufactured Materials. 5 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
On the formulation and numerical implementation of anisotropic elasto-plasticity with application to fibre-reinforced composites
Gaddikere Nagaraja, S., 2019Research output: Thesis › Doctoral Thesis
- Published
On the formulation of anisotropic plasticity for polymeric composites - rate-dependent models with non-linear isotropic/kinematic hardening.
Gaddikere Nagaraja, S. & Schuecker, C., 2019, Proceedings in Applied Mathematics and Mechanics 2019.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Schriftenreihe Kunststofftechnik Leoben, Band 9: „28. Leobener Kunststoff-Kolloquium: Simulation in der Kunststofftechnik“
Schuecker, C. & Fuchs, P. F., 2019, Schriftenreihe Kunststofftechnik Leoben, Band 9: „28. Leobener Kunststoff-Kolloquium: Simulation in der Kunststofftechnik“. Vol. 9. (Schriftenreihe Kunststofftechnik Leoben).Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
- Published
THE IMPORTANCE OF THE MECHANICAL INTERACTIONS BETWEEN CONSTITUENT MATERIALS FOR CONSTITUTIVE MODELING OF HYPERELASTIC FIBER–REINFORCED COMPOSITES
Mansouri, M. R., Fuchs, P. F. & Schuecker, C., 2019, Proceedings of ICoNSoM 2019 - International Conference on Nonlinear Solid Mechanics.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Zur Bewertung der Zuverlässigkeit von Verbundbauteilen
Schuecker, C., 2019, Schriftenreihe Kunststofftechnik Leoben: „28. Leobener Kunststoff-Kolloquium: Simulation in der Kunststofftechnik“. Vol. 9.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
