Chair of Ceramics (320)

Organisational unit: Chair

201 - 250 out of 534Page size: 50

Research output

  1. 2017
  2. Published

    Advanced creep testing of refractories providing new insight into material behaviour

    Jin, S., 2017.

    Research output: Contribution to conference › Poster › Research

  3. Published

    Analyse eines bindemittelhaltigen Pumpversatzes

    Schall, M. & Moser, A., 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162, 6

    Research output: Contribution to journal › Article › Research

  4. Published

    Analyse und Optimierung der Versatzeigenschaften im Scheelit-Bergbau Mittersill

    Walkner, M., 2017

    Research output: Thesis › Master's Thesis

  5. Published

    Anwendung von Gebirgsklassifikationssystemen im untertägigen Bergbau

    Kirschner, P. & Moser, A., 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162, 6

    Research output: Contribution to journal › Article › Research

  6. Published

    Application of rock mass classification systems as a tool for rock mass strength determination

    Moser, A., 2017, Deep Mining 2017: Eighth International Conference on Deep and High Stress Mining.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Challenges and limits of rock mass documentation and classification systems

    Moser, A., 2017, VIII International Research and Practice Conference “Innovations in Mining Enterprise Engineering: Geomechanical Tools in Planning, Design and Mining Operations”.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Charakterisierung des Kristallisationsverhaltens einer fluorfreien Gießschlacke für den Strangguss von Stahl

    Schützeneder, A., 2017

    Research output: Thesis › Master's Thesis

  9. Published

    Combined Effects of Boron Carbide, Silicon, and MWCNTs in Alumina-Carbon Refractories on Their Microstructural Evolution

    Liao, N., Li, Y., Jin, S., Xu, Y., Sang, S. & Deng, Z., 2017, In: Journal of the American Ceramic Society. 100.2017, 1, p. 443-450 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Comparison of Cement- and Hydratable Alumina-Bonded Alumina-Spinel Materials for Steel Ladle Purging Plugs

    Long, B., Buhr, A., Jung, I.-H., Jin, S., Harmuth, H. & Dutton, J., 2017, In: Refractories worldforum. 9, 3, p. 93-106 14 p.

    Research output: Contribution to journal › Article › Research

  11. Published

    Composition and properties of a metakaolin-based geopolymer binder suitable for shaping using a slinger

    Harmuth, H. & Mairitsch, E., 2017, Construction and Building Materials. p. 277-283

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  12. Published

    Compressive creep testing of carbon containing materials under reducing atmosphere

    Li, Y., 2017

    Research output: Thesis › Master's Thesis

  13. Published

    Fracture investigation of refractories under combined mode I and mode II loading

    Zhou, R., 2017

    Research output: Thesis › Master's Thesis

  14. Published

    Geotechnische Beurteilung eines untertägigen Bergbaues

    Schinagl, S. & Moser, A., 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162, 6

    Research output: Contribution to journal › Article › Research

  15. Published

    In situ Untersuchung der ersten Schmelzphasenbildung von infiltrierten Feuerfestprodukten mittels Hochtemperatur- Konfokalmikroskopie

    Riedler, S., 2017

    Research output: Thesis › Master's Thesis

  16. Published

    Main wear mechanisms of SEN slag band materials

    Harmuth, H., Kircher, V. & Kölbl, N., 2017, In: China's refractories. 26.2017, 1, p. 1-7 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Measurement and simulation of refractory creep and fracture

    Jin, S., 2017

    Research output: Thesis › Habilitation thesis › peer-review

  18. Published

    Phase formation in Al2O3-C refractories with Al addition

    Atzenhofer, C., Gschiel, S. & Harmuth, H., 2017, In: Journal of the European Ceramic Society. 37.2017, 4, p. 1805-1810 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Process zone in refractory ceramics

    Dai, Y., 2017

    Research output: Thesis › Doctoral Thesis

  20. Published

    Towards industrial vessel refractories lining design: a case study

    Jin, S., Harmuth, H. & Gruber, D., 2017.

    Research output: Contribution to conference › Paper

  21. Published

    Untersuchung des Schmelz-, Lösungs- und Kristallisationsverhaltens oxidisch-silikatischer Systeme mittels HT-LSCM

    Kircher, V., 2017

    Research output: Thesis › Doctoral Thesis

  22. Published

    Untersuchungen zum Bruchverhalten feuerfester Baustoffe mit einem Mini Keilspaltversuch

    Pressler, M., 2017

    Research output: Thesis › Master's Thesis

  23. 2016
  24. Published

    Assessment of thermal shock resistance by HMOR test with high heating rate

    Gruber, D., Sidi Mammar, A., Harmuth, H. & Grasset-Bourdel, R., 28 Sept 2016, 59th International Colloquium on Refractories - Refractories for Metallurgy. Aachen

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Advanced Measures to Characterize the Mechanical Properties of Refracrories

    Jin, S., Harmuth, H., Gruber, D. & Sidi Mammar, A., 20 Sept 2016, Proceedings of the 7th International Symposium on Refractories ISR 2016, Xi'an, China, September 20-22, 2016. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Main Wear Mechanisms of SEN Slag Band Materials

    Harmuth, H., Kircher, V. & Kölbl, N., 20 Sept 2016, Proc. 7th International Conference on Refractories ISR 2016, Xi'an, China, September 20-22. p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Stability of Magnesia bricks under the conditions of steel degassing – a case study

    Harmuth, H., 18 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    Stand der Technik der Versatztechnologie im untertägigen Bergbau

    Moser, A., Aug 2016, In: Berg- und hüttenmännische Monatshefte : BHM. 161, 8, p. 345-350 5 p., 8.

    Research output: Contribution to journal › Article › Research

  29. Published

    Irreversible thermodynamics applied to diffusional phase transformations

    Gamsjäger, E. & Kircher, V. (Co-editor), 29 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  30. Published

    Fundamental investigations for the design of fluorine free mold powder compositions

    Marschall, I., Yang, X. & Harmuth, H., 22 May 2016, Advances in Molten Slags, Fluxes, and Salts: Proceedings of the 10th International Conference on Molten Slags, Fluxes and Salts. Reddy, R. G., Chaubal, P., Pistorius, P. C. & Pal, U. (eds.). Seattle Washington USA, p. 299 306 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Enhanced mechanical performance of Al2O3-C refractories with nano carbon black and in-situ formed multi-walled carbon nanotubes (MWCNTs)

    Liao, N., Li, Y., Jin, S., Sang, S. & Harmuth, H., 1 Feb 2016, In: Journal of the European Ceramic Society. 36.2016, 3, p. 867-874 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. E-pub ahead of print

    Thermomechanical failure modeling and investigation into lining optimization for a Ruhrstahl Heraeus snorkel

    Jin, S., Gruber, D., Harmuth, H. & Rössler, R., 28 Jan 2016, (E-pub ahead of print) In: Engineering Failure Analysis. 62.2016, April, p. 254-262 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Tensile creep measurements of ordinary ceramic refractories at service related loads including setup, creep law, testing and evaluation procedures

    Sidi Mammar, A., Gruber, D., Harmuth, H. & Jin, S., 14 Jan 2016, In: Ceramics International : CI. 42.2016, 1 May, p. 6791-6799 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    An experimental study to investigate the interaction of backfill and rock mass

    Moser, A., 2016.

    Research output: Contribution to conference › Paper › peer-review

  35. Published

    An experimental study to investigate the interaction of backfill and rock mass

    Moser, A., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  36. Published

    Herstellung und Untersuchung von MgAlON gebundenen Feuerfestprodukten

    Sieger, M., 2016

    Research output: Thesis › Master's Thesis

  37. Published

    Investigation of High Temperature Tensile Creep of Refractories

    Sidi Mammar, A., 2016

    Research output: Thesis › Doctoral Thesis

  38. Published

    Mechanical behaviour of refractories

    Gruber, D., 2016

    Research output: Thesis › Habilitation thesis › peer-review

  39. Published

    The Influence of Al and Si Additives on the Microstructure and Mechanical Properties of Low-Carbon MgO-C Refractories

    Zhu, T., Li, Y., Jin, S. & Sang, S. B., 2016, In: Journal of ceramic science and technology. 7, 1, p. 127-134

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Thermal shock resistance of magnesia spinel refractories—Investigation with the concept of configurational forces

    Gruber, D., Sistaninia, M., Fasching, C. & Kolednik, O., 2016, In: Journal of the European Ceramic Society. 36, p. 4301-4308 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. 2015
  42. Published

    Catalyst-free hybridization of silicon carbide whiskers and expanded graphite by vapor deposition method

    Wang, Q., Li, Y., Jin, S. & Sang, S., Dec 2015, In: Ceramics International : CI. 41, 10, p. 14359-14366

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Correlation of pore structure and alkali vapor attack resistance of bauxite-SiC composite refractories

    Ren, B., Sang Shaobai, Li Yawei & Jin, S., Dec 2015, In: Ceramics International : CI. 41, 10, p. 14674-14683

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Thermography and complementary measurements as tools to detect micro-irregularities in electronic components

    Röhrig, S., Petschenig, I., Bermejo, R., Hofstätter, M., Aldrian, F., Danzer, R. & Supancic, P., Dec 2015, In: Journal of ceramic science and technology. 6, 4, p. 255-260 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Effect of the reactivity and porous structure of expanded graphite (EG) on microstructure and properties of Al2O3-C refractories

    Wang, Q., Li, Y., Sang, S. & Jin, S., 5 Oct 2015, In: Journal of alloys and compounds. 645, p. 388-397

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Simulation of micro-crack formation in a magnesia spinel refractory during the production process

    Fasching, C., Gruber, D. & Harmuth, H., 25 Aug 2015, In: Journal of the European Ceramic Society. 35, p. 4593-4601 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Catalytic formation of one-dimensional nanocarbon and MgO whiskers in low carbon MgO-C refractories

    Zhu, T., Li, Y., Jin, S., Sang, S. & Liao, N., Apr 2015, In: Ceramics International : CI. 41, 3, p. 3541-3548

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Influence of creep on the thermomechanical behavior of a rh-snorkel

    Jin, S., Harmuth, H., Gruber, D. & Rössler, R., 1 Jan 2015.

    Research output: Contribution to conference › Paper › peer-review

  49. Published

    Anwendung der Double Hot Thermocouple Technique zur Charakterisierung von Schlacken

    Stroißnigg, M., 2015

    Research output: Thesis › Master's Thesis

  50. Published

    Assessment of thermal shock resistance by hmor test with high heating rate

    Sidi Mammar, A., Harmuth, H., Gruber, D. & Grasset-Bourdel, R., 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Assessment of thermal shock resistance by HMOR test with high heating rate

    Sidi Mammar, A., Harmuth, H., Gruber, D. & Grasset-Bourdel, R., 2015, UNITECR 2015. Wien, 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Creep Modeling of Magnesia-chromite Bricks in a RH Snorkel During a Process Cycle

    Jin, S., Harmuth, H., Gruber, D. & Roessler, R., 2015, In: China's refractories. 24, 1, p. 22-25

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Entwicklung eines Verfahrens zur Beurteilung des Langzeitverhaltens gipsgebundener Putzträgerplatten für den Außenbereich unter zyklischer Feuchte- und Trocknungsbeanspruchung

    Stückelschweiger, M., 2015

    Research output: Thesis › Master's Thesis

Previous 1 2 3 4 5 6 7 8 ...11 Next
View graph of relations

Contact information

Peter-Tunner-Straße 5, 8700 Leoben
  • Main phone number: +43 3842 402 3201