Chair of Ceramics (320)

Organisational unit: Chair

101 - 150 out of 534Page size: 50

Research output

  1. 2021
  2. Published

    Design, operation and evaluation of an improved refractory wear testing technique

    Kircher, V., Burhanuddin & Harmuth, H., 17 Apr 2021, In: Measurement. 178.2021, June, 9 p., 109429.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Numerical Investigations on Thermomechanical Behaviour of Purging Plug with Rectangular and Circular Slits

    Tan, F., He, Z., Jin, S., Wang, Q., Pan, L., Li, Y. & Li, B., 11 Apr 2021, In: ISIJ international. 61.2021, 4, p. 4-9 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Investigation of Calcium Aluminate based Mold Slag Compositions

    Harmuth, H. & Marschall, I., 21 Feb 2021.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    The femtosecond laser micro-processing of the field-emission tip arrays in single crystal CeB6

    Zhou, N., Zhang, W., Zhang, X., Liu, H., Liu, Q., Xiao, Y., Liu, Y., Jin, S. & Liao, N., Feb 2021, In: Vacuum. 184 , 8 p., 109929.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Advanced mechanical characterizations and thermomechanical modeling of shaped alumina spinel material in steel ladle

    Samadi, S., 2021

    Research output: Thesis › Doctoral Thesis

  7. Published

    Experimentelle Untersuchung der Auswirkungen des Kohlenstoffgehalts auf das Aufschmelzen von Gießpulvern

    Schweighofer, S., 2021

    Research output: Thesis › Master's Thesis

  8. Published

    In-plant observations and thermomechanical modeling of different vessel types applying an insulation layer

    Rebouillat, L. & Jin, S., 2021, AISTech 2021 - Proceedings of the Iron and Steel Technology Conference. Association for Iron and Steel Technology, AISTECH, p. 1667-1673 7 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 2021-June).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Mechanische Charakterisierung kohlenstoffhaltiger feuerfester Baustoffe bei hohen Temperaturen

    Stückelschweiger, M., 2021

    Research output: Thesis › Doctoral Thesis

  10. Published

    New mold slag compositions for the continuous casting of soft steels

    Kölbl, N., 2021.

    Research output: Contribution to conference › Abstract › peer-review

  11. Published

    New Mold Slag Compositions for the Continuous Casting of Soft Steels

    Kölbl, N., 2021, In: Steel research international. 2022, 93, p. 1-7 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Structural optimization and design of purging plug for improving its service performance

    Tan, F. G., Jin, S. L., He, Z. & Li, Y. W., 2021, In: Journal of iron and steel research international. 29.2022, September, p. 628-635 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Synthesis of ZrX (X=C,O,N) and its possible refractory applications

    Kucheryavaya, A., 2021

    Research output: Thesis › Doctoral Thesis

  14. Published

    Untersuchung von Flotationsabgängen als Ausgangsstoff zur Herstellung von alkali-aktivierten Bindemitteln

    Berner, M., 2021

    Research output: Thesis › Master's Thesis

  15. Published

    Viskositätsbestimmung von nicht newtonschen Schmelzen

    Ablasser, M., 2021

    Research output: Thesis › Master's Thesis

  16. 2020
  17. Published

    Experimental Investigation of the Tension and Compression Creep Behavior of Alumina-Spinel Refractories at High Temperatures

    Teixeira, L., Samadi, S., Gillibert, J., Jin, S., Sayet, T., Gruber, D. & Blond, E., 22 Sept 2020, In: Ceramics. 3.2020, 3, p. 372-383 12 p.

    Research output: Contribution to journal › Article › Transfer › peer-review

  18. E-pub ahead of print

    Modeling hydration of mine tailings: Production of hydraulic binders from alkali-activated materials

    Blanc, P., Lach, A., Lassin, A., Falah, M., Obenaus-Emler, R. & Guignot, S., 9 Sept 2020, (E-pub ahead of print) In: Cement and concrete research. 137.2020, November, 11 p., 106216.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Creep Parameter Determination of a Shaped Alumina Spinel Refractory Using Statistical Analysis

    Samadi, S., Teixeira, L., Jin, S., Gruber, D. & Harmuth, H., Sept 2020.

    Research output: Contribution to conference › Paper

  20. Published

    Review of closed water loops with ore sorting and tailings valorisation for a more sustainable mining industry

    Kinnunen, P., Obenaus-Emler, R., Raatikainen, J., Guignot, S., Guimera, J., Ciroth, A. & Heiskanen, K., Aug 2020, In: Journal of Cleaner Production.

    Research output: Contribution to journal › Article › Research › peer-review

  21. E-pub ahead of print

    R-curves determination of ordinary refractory ceramics assisted by digital image correlation method

    Dai, Y., Harmuth, H., Jin, S., Gruber, D. & Yawei, L., 20 May 2020, (E-pub ahead of print) In: Journal of the European Ceramic Society. 40.2020, 13, p. 4655-4663 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Physical Modeling Evaluation on Refining Effects of Ladle with Different Purging Plug Designs

    Tan, F., He, Z., Jin, S., Pan, L., Yawei, L. & Li, B., 25 Mar 2020, In: Steel research international. 91.2020, 6, 8 p., 1900606.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Statistical study of compressive creep parameters of an alumina spinel refractory

    Samadi, S., Jin, S., Gruber, D., Harmuth, H. & Schachner, S., 1 Mar 2020, In: Ceramics International : CI. 46.2020, 10A, p. 14662-14668 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Improvement of mechanical strength of alkali-activated materials using micro low-alumina mine tailings

    Falah, M., Ohenoja, K., Obenaus-Emler, R., Kinnunen, P. & Illikainen, M., Mar 2020, In: Construction & building materials (Construction and building materials).

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Assessment of mine tailings as precursors for alkali-activated materials for on-site applications

    Obenaus-Emler, R., Falah, M. & Illikainen, M., 25 Feb 2020, In: Construction & building materials (Construction and building materials). 246.2020, 10 p., 118470.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Influence of crystallization on properties and microstructure of fused quartz bricks for hot repair of coke ovens

    Wei, W., Yonghe, L., Yucheng, Y., Shengli, J., Jianhua, N., Wei, C., Jian, Z. & Cailiao, N., Jan 2020, In: Naihuo-cailiao : shuangyuekan = Refractories. 54.2020, 1, p. 41-46 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Mechanical and fracture investigation of magnesia refractories with acoustic emission-based method

    Dai, Y., Yawei, L., Jin, S., Harmuth, H., Yan, W. & Xu, X., Jan 2020, In: Journal of the European Ceramic Society. 40.2020, 1, p. 181-191 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Creep behaviour of refractories under various loading conditions

    Schachner, S., 2020

    Research output: Thesis › Doctoral Thesis

  29. Published

    Fracture mechanical characterisation of model castables with wedge splitting tests

    Gull, R., 2020

    Research output: Thesis › Master's Thesis

  30. Published

    In-plant observations and thermomechanical modeling of different vessel types applying an insulation layer

    Rebouillat, L. & Jin, S., 2020, Proceedings of the Iron and Steel Technology Conference, AISTech 2020. p. 2226-2232 7 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Mechanical properties of a new class of MGO-C castables with extruded graphite pellets

    Paschek, G. H., 2020

    Research output: Thesis › Master's Thesis

  32. Published

    Mechanische Charakterisierung eines kohlenstoffgebundenen feuerfesten MgO-C Werkstoffes im Hochtemperaturbereich

    Bauer, T., 2020

    Research output: Thesis › Master's Thesis

  33. 2019
  34. Published

    Fracture behaviour of magnesia refractory materials in tension with the Brazilian test

    Dai, Y., Li, Y., Xu, X., zhu, Q., Yan, W., Jin, S. & Harmuth, H., Dec 2019, In: Journal of the European Ceramic Society. 39.2019, 16, p. 5433-5441 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Thermomechanical Analysis of Purging Plugs by Applying Fluid–Solid Conjugate Heat Transfer Modeling

    Tan, F., He, Z., Jin, S., Cai, H., Li, B., Li, Y. & Harmuth, H., 1 Nov 2019, In: Steel research international. 90.2019, 11, 9 p., 1900213.

    Research output: Contribution to journal › Article › Research › peer-review

  36. E-pub ahead of print

    Fracture behavior of magnesia refractory materials under combined cyclic thermal shock and mechanical loading conditions

    Dai, Y., Li, Y., Jin, S., Harmuth, H. & Xu, X., 17 Oct 2019, (E-pub ahead of print) In: Journal of the American Ceramic Society. 103.2020, 3, p. 1956-1969 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    A method for steel ladle lining optimization applying thermomechanical modelling and Taguchi approaches

    Jin, S., Hou, A., Harmuth, H. & Gruber, D., 16 Oct 2019, Proceedings of UNITECR 2019: 16th Biennial Worldwide Congress. Yokohama, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Contributions to refractories creep characterisation

    Gruber, D., Jin, S., Schachner, S., Stückelschweiger, M. & Harmuth, H., 16 Oct 2019, Proceedings of UNITECR'19. Yokohama, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Contributions to refractories creep characterisation

    Gruber, D., Jin, S., Schachner, S., Stückelschweiger, M. & Harmuth, H., 16 Oct 2019.

    Research output: Contribution to conference › Presentation › Research

  40. Published

    Benefits of the addition of a structural insulation layer in the refractory lining of rotary kiln: Thermomechanical modeling and In-plant results

    Cole, D., Stover, E., Jin, S. & Rebouillat, L., 13 Oct 2019.

    Research output: Contribution to conference › Paper

  41. Published

    TOWARDS THE PREDICTION OF REFRACTORY EROSION BY LIQUID SLAGS AND METAL

    Leitold, C., Harmuth, H. & Vollmann, S., 26 Sept 2019, Supplier Industries enabling REFRACTORIES. p. 163-166 194 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Effect of crystallization extent on fracture of fused silica bricks

    Wang, W., Liang, Y., Yin, Y., Nie, J. & Jin, S., 25 Sept 2019.

    Research output: Contribution to conference › Paper

  43. E-pub ahead of print

    Inverse Simulation of Fracture Parameters for Cement-Bonded Corundum Refractories

    Pan, L., He, Z., Li, Y., Li, B. & Jin, S., 4 Sept 2019, (E-pub ahead of print) In: JOM. 71.2019, 11, p. 3996-4004 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Effects of Activator Properties and Curing Conditions on Alkali-Activation of Low-Alumina Mine Tailings

    Falah, M., Obenaus-Emler, R., Kinnunen, P. & Illikainen, M., 13 Aug 2019, In: Waste and biomass valorization. 11.2020, September, p. 5027–5039 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Wedge-Splitting Test on Carbon-Containing Refractories at High Temperatures

    Stückelschweiger, M., Gruber, D., Jin, S. & Harmuth, H., 8 Aug 2019, In: Applied Sciences : open access journal. 9.2019, 16, 10 p., 3249.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    耐火材料力学行为表征方法研究进展

    Dai, Y., Li, Y. & Jin, S., 1 Aug 2019, In: Kuei Suan Jen Hsueh Pao / Journal of the Chinese Ceramic Society. 47.2019, 8, p. 1089-1094 6 p.

    Research output: Contribution to journal › Review article › peer-review

  47. Published

    Assessment of mine tailings as precursors for alkali-activated materials for on-site applications

    Obenaus-Emler, R., Falah, M. & Illikainen, M., Aug 2019.

    Research output: Contribution to conference › Paper › peer-review

  48. E-pub ahead of print

    Automated break temperature determination of mould slags for the continuous casting of steel based on temperature-dependent viscosity data

    Kölbl, N. & Harmuth, H., 25 Jul 2019, (E-pub ahead of print) In: Ironmaking and steelmaking. 47.2019, 8, p. 899-902 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Influence of Variation/Response Space Complexity and Variable Completeness on BP-ANN Model Establishment: Case Study of Steel Ladle Lining

    Hou, A., Jin, S., Gruber, D. & Harmuth, H., 16 Jul 2019, In: Applied Sciences : open access journal. 9.2019, 14, 12 p., 2835.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Modelling of a steel ladle and prediction of its thermomechanical behavior by finite element simulation together with artificial neural network approaches

    Hou, A., Jin, S., Gruber, D. & Harmuth, H., 4 Jul 2019, p. 1109 - 1116. 7 p.

    Research output: Contribution to conference › Paper

  51. Published

    A method to characterize asymmetrical three-stage creep of ordinary refractory ceramics and its application for numerical modelling

    Schachner, S., Jin, S., Gruber, D. & Harmuth, H., 6 Jun 2019, In: Journal of the European Ceramic Society. 39.2019, 14, p. 4384-4393 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Thermal and Thermomechanical Responses Prediction of a Steel Ladle Using a Back-Propagation Artificial Neural Network Combining Multiple Orthogonal Arrays

    Hou, A., Jin, S., Harmuth, H. & Gruber, D., 29 Apr 2019, In: Steel research international. 2019, 8 p., 1900116.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Geopolymers from mining tailings for more sustainable raw material supply

    Obenaus-Emler, R., Illikainen, M., Falah, M., Kinnunen, P. & Heiskanen, K., 22 Feb 2019, RICON17: REMINE International Conference Valorization of Mining and other Mineral Wastes into Construction Materials by Alkali-Activation. EDP Sciences, 5 p. 05001

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 6 7 8 ...11 Next
View graph of relations

Contact information

Peter-Tunner-Straße 5, 8700 Leoben
  • Main phone number: +43 3842 402 3201