Chair of Casting Research (330)

Organisational unit: Chair

251 - 300 out of 434Page size: 50

Research output

  1. 2013
  2. Published

    Erweiterung des Eigenschaftspotentials der Legierung Al Mg5Si2Mn durch eine gezielte Wärmebehandlung

    Petkov, T., Künstner, D., Pabel, T., Faerber, K., Kneißl, C. & Schumacher, P., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 104-112

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Evidence for an extensive, undercooling-mediated transition in growth orientation and novel dendritic seaweed microstructures in Cu-8,9wt% Ni

    Schumacher, P. (Reviewer), 2013, UK : Elsevier.

    Research output: Other contribution › Transfer › peer-review

  4. Published

    Evolution of Texture and its Correlation with Microstructure and Mechanical Property Anisotropy in AA7010 Aluminium Alloy: Reportnr.: 5703; Auftraggebern: Indian Institute of Science Bangalore 560 012, Indien, Mr. Chandan Mondal; Review

    Schumacher, P. (Reviewer), 2013

    Research output: Other contribution › Transfer › peer-review

  5. Published

    Hot cracking susceptibility of AlSi7MgCu alloys

    Pabel, T., Kneißl, C., Schumacher, P., Faerber, K. & Bozorgi, S., 2013, In: Foundry review. 5, 1, p. 4-5

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Hot cracking susceptibility of AlSi7MgCu alloys and effects of alloying elements magnesium and copper

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., 2013, In: China Foundry. 4, p. 248-253

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Modification of the eutectic Mg2Si-Phase of AlMgSi-Cast Alloys

    Pabel, T., Petkov, T., Kneißl, C. & Schumacher, P., 2013, Modification of the eutectic Mg2Si-Phase of AlMgSi-Cast Alloys. p. 303-304

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Modification of the Eutectic Mg2Si-Phase of AlMgSi-Cast Alloys

    Pabel, T., Petkov, T., Kneißl, C. & Schumacher, P., 2013, Light Metals 2013. p. 303-304

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  9. Published

    Nichtmetallische Einschlüsse in Edelstählen: Korrelation von unterschiedlichen Prüfmethoden

    Tazreiter, A., Schützenhöfer, W., Beck, R. & Schumacher, P., 2013, In: Practical metallography = Praktische Metallographie. Sonderband, p. 221-226

    Research output: Contribution to journal › Article › Research

  10. Published

    Refinement of Eutectic Si Phase in Al-5Si Alloys with Yb Additions

    Li, J., SUETSUGU, S., TSUNEKAWA, Y. & Schumacher, P., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, p. 669-681

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Solution Strengthened Ferritic Ductile Cast Iron According DIN EN 1563: 2012-Properties, Production and Application: Reportnr. 1733, Auftraggeber: 2013 Keith Millis Sympostium, AFS Transactions, Review

    Stets, W., Löblich, H., Schumacher, P. & Gassner, G., 2013, Proceedings of the 2013 Keith Millis Symposium on Ductile Cast Iron. American Foundry Society

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Tailoring Precipitates in Mg-6Zn-2Gd based Alloy subjected to high pressure torsion

    Li, J. & Schumacher, P., 2013, Tailoring Precipitates in Mg-6Zn-2Gd based alloy subjected to high pressure torsion. p. 351-356

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Tailoring Precipitates in Mg-6Zn-2Gd based Alloy Subjected to High Pressure Torsion

    Li, J. & Schumacher, P., 2013, Magnesium Technology 2013. p. 351-356

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  14. Published

    The grain refinement mechanism of cast aluminium by zirconium

    Schumacher, P. (Reviewer), 2013, Elsevier.

    Research output: Other contribution › Transfer › peer-review

  15. Published

    The microstructure of melt-spun Al-5Ti-1B-1Re master alloy and its refining efficiency on as-cast A356 alloys

    Schumacher, P., 2013, In: Journal of alloys and compounds. D, p. 1-1

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Untersuchung der Wirkung von lokalem Nachverdichten im Druckgießverfahren und Entwicklung einer geeigneten Versuchsform zur Bestimmung optimaler Nachverdichtungsparameter

    Künstner, D., 2013

    Research output: Thesis › Master's Thesis

  17. Published

    Vergleich und Bewertung verschiedener Reinheitsgradauswertungsmethoden anhand ausgewählter Edelstähle

    Tazreiter, A., 2013

    Research output: Thesis › Master's Thesis

  18. Published

    Vliv legujicich prvků na slévárenskych slitin AlSi7MgCu ke vzniku trhlin za tepla

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., 2013, In: Slévárenství. p. 263-270

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Werkstoffe in der Fertigung

    Petkov, T., Künstner, D., Pabel, T., Faerber, K., Kneißl, C. & Schumacher, P., 2013, In: Werkstoffe in der Fertigung. p. 39-42

    Research output: Contribution to journal › Article › Research › peer-review

  20. 2012
  21. Published

    Änderung der Warmrissneigung bei AlSi7MgCu legierungen in Abhängigkeit vom Kupfer- und Magnesiumgehalt

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., Sept 2012, In: Metall. 66, 9, p. 391-396 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Einfluss der Legierungselemente auf die Heißrissneigung bei AlSi7MgCu-Gusslegierungen

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., Sept 2012, In: Giesserei. 99, 9, p. 30-37

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Änderung der Warmrissneigung bei AlS7MgCu Legierungen in Abhängigkeit vom Kupfer- und Magnesiumgehalt

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., 2012, In: Metall. p. 336-341

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Az AlSi7MgCu ötvözetek melegrepedési hajlama és az ötvözöelemek (magnézium és réz) hatásai

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., 2012, In: Bányászati és kohászati lapok = Zurnal gornogo dela i metallurgija = Zeitschrift für Berg- und Hüttenwesen / Kohászat = Metallurgija = Hüttenwesen. 145, 5, p. 19-24

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Bildanalytische Methode zur Charakterisierung des Veredelungsgrades von Aluminium-Silizium Gusslegierungen

    Heugenhauser, S., Stauder, B., Djurdjevic, M. & Schumacher, P., 2012, Fortschritte in der Metallographie : Sonderbände der praktischen Metallographie. Frankfurt: DGM, Vol. 44. p. 231-237 6 p. (Sonderbände der praktischen Metallographie; vol. 44).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  26. Published

    Charakterisierung der Heissrissempfindlichkeit von Aluminium-Gusslegierungen

    Staggl, S., Pabel, T., Bozorgi, S., Faerber, K., Kneißl, C. & Schumacher, P., 2012, In: Giesserei-Praxis. p. 192-196

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Effect of alloying Elements on hot cracking suscetibility of AlSi7MgCu-alloys

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., 2012, In: International foundry research = Giessereiforschung. p. 29-34

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Effect of SiC reinforcement particles on the grain density in a magnesium-based metal-matrix composite: Modelling and experiment

    Lelito, J., Pawel L., Z., Shirzadi, A. A., Greer, A. L., Krajewski, W. K., Suchy, J. S., Faerber, K. & Schumacher, P., 2012, In: Acta materialia. 60, p. 2950-2958

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Effect of Y addition and cooling rate on refinement of eutectic Si in Al–5 wt-%Si alloys

    Li, J. & Schumacher, P., 2012, In: International journal of cast metals research. 25, p. 347-357

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Einfluss der Legierungselemente auf die Heißrissbildung bei AlSi7MgCu-Gusslegierungen

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., 2012, In: Giesserei. 99, p. 30-37

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Einfluss von Seltenen (Erd) Metallen auf eutektische und peritektische Erstarrung in Aluminium-Legierungen

    Faerber, K., 2012, 171 p.

    Research output: Thesis › Doctoral Thesis

  32. Published

    Ermittlung der Wärmebehandlungsparameter für eine AlMgSi-Gusslegierung

    Petkov, T., Künstner, D., Pabel, T., Faerber, K., Kneißl, C. & Schumacher, P., 2012, In: Giesserei. 99, p. 26-37

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Ermittlung prozesskritischer Grenzen für Kornfeinung und Veredelung von untereutektischen Al-Si-Cu Gusslegierungen

    Heugenhauser, S., 2012, 105 p.

    Research output: Thesis › Master's Thesis

  34. Published

    Hot cracking susceptibility of AlSi7MgCu-Alloys and the effects of alloying elements (Magnesium and Copper)

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., 2012, In: Revista de turnătorie : RT ; publicaţie a Asociaţiei Tehnice de Turnătorie din România . 9-10

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Improved properties of aluminium cast parts through the use of inorganic cores

    Pabel, T., Kneißl, C., Schumacher, P., Brotzki, J. & Müller, J., 2012, In: Foundry trade journal international. 186, 3696, p. 257-261

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Improvement of the resistance of titanium aluminides to environmental embrittlement

    Masset, P. J., Bleicher, F., Bortolotto, L., Geiger, G., Kolitsch, A., Langlade, C., Paul, J., Pelic, B., Pyczak, F., Rafaja, D., Schumacher, P., Schütze, M., Wolf, G. & Yankov, R. A., 2012, In: ECS transactions. 50, 44, p. 127-141 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Messung und Simulation des Verzugs von Druckgussbauteilen

    Hofer, P., 2012, 220 p.

    Research output: Thesis › Doctoral Thesis

  38. Published

    Modification of Al-Si alloys

    Li, J., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  39. Published

    Optimierung der Sphärogussbehandlung mittels einer Drahteinspultechnik

    Sönmez, S. S., 2012

    Research output: Thesis › Master's Thesis

  40. Published

    Optimierung der Wärmebehandlung einer AlMgSi-Gusslegierung

    Petkov, T., Künstner, D., Pabel, T., Faerber, K., Kneißl, C. & Schumacher, P., 2012, In: Gießerei-Rundschau. 58, p. 194-200

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Optimierung der Wärmebehandlung einer AlMgSi-Gusslegierung

    Petkov, T., Künstner, D., Pabel, T., Faerber, K., Kneißl, C. & Schumacher, P., 2012, In: Giesserei-Praxis. p. 268-274

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Phase Selection in 6082 Al-Mg-Si Alloys

    Wimmer, A. C., Li, J. & Schumacher, P., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. p. 301-305

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Precipitation microstructure and age-hardening response of an Mg-Gd-Nd-Zn-Zr alloy

    Li, J., Sha, G., Wang, T., Jie, W. & Ringer, S., 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 534, p. 1-6

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Precipitation microstructure and their strengthening effects of an Mg-2.8Nd-0.6Zn-0.4Zr alloy with a 0.2 wt. % Y addition

    Li, J., Sha, G., Jie, W. & Ringer, S., 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 538, p. 272-280

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Simulation of distortion and residual stress in high pressure die casting - modelling and experiments

    Hofer, P., Kaschnitz, E. & Schumacher, P., 2012, In: IOP Conference Series: Materials Science and Engineering. 33.2012, p. 1-8 8 p., 012055.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Susceptibilitatea fisurării la cald a aliajelor AlSi7MgCu şi influenţa elementelor de aliere (Magneziu şi Cupru)

    Pabel, T., Bozorgi, S., Kneißl, C., Faerber, K. & Schumacher, P., 2012, In: Revista de turnătorie : RT ; publicaţie a Asociaţiei Tehnice de Turnătorie din România . 9-10, p. 2-11

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Untersuchungsmethoden zur Charakterisierung der Heißrissempfindlichkeit von Aluminium-Gusslegierungen

    Staggl, S., Bozorgi, S., Pabel, T., Faerber, K., Kneißl, C. & Schumacher, P., 2012, In: Gießerei-Rundschau. p. 137-143

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Werkstoff- und fertigungstechnische Grundlagen der Herstellung und Anwendung von hoch siliciumhaltigem Gusseisen mit Kugelgraphit

    Gassner, G., Bauer, W., Schumacher, P., Löblich, H. & Stets, W., 2012, In: Giesserei. p. 20-23

    Research output: Contribution to journal › Article › Research › peer-review

  49. 2011
  50. Published

    Änderung der Warmrissneigung bei AlSi7MgCu-Legierungen in Abhängigkeit vom Kupfer- und Magnesiumgehalt

    Pabel, T., Bozorgi, S., Kneißl, C., Haberl, K. & Schumacher, P., 2011, In: International aluminium journal. 3, p. 61-65

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Beitrag zu Formstoffen in Hochtemperaturanwendungen

    Steiner, J., 2011

    Research output: Thesis › Master's Thesis

  52. Published

    Bestimmung technologischer Eigenschaften von Al-Legierungen – Einsatz eines neu entwickelten Kokillensets im Niederdruckkokillengießverfahren

    Kneißl, C., Pabel, T., Dambauer, G. & Schumacher, P., 2011, In: Giesserei. p. 22-28

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Correlation of porosity detected by computed tomography and fatigue strength of aluminium alloys

    Pabel, T., Geier, G., Habe, D., Rosc, J., Petkov, T. & Schumacher, P., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 12 3 4 5 6 7 8 9 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 3301