Polymers, ‎2073-4360

Journal

ISSNs2073-4360
1 - 70 out of 70Page size: 100

Research output

  1. 2024
  2. Published

    3D-Printed Acrylated Soybean Oil Scaffolds with Vitrimeric Properties Reinforced by Tellurium-Doped Bioactive Glass

    Bergoglio, M., Kriehuber, M., Sölle, B., Rossegger, E., Schlögl, S., Najmi, Z., Cochis, A., Ferla, F., Miola, M., Vernè, E. & Sangermano, M., 23 Dec 2024, In: Polymers. 16.2024, 24, 19 p., 3614.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Synthesis and Characterization of Rebondable Polyurethane Adhesives Relying on Thermo-Activated Transcarbamoylation

    Bautista-Anguís, D., Reiner, L., Röper, F., Maar, S., Wolfahrt, M., Wolfberger, A. & Schlögl, S., 3 Oct 2024, In: Polymers. 16.2024, 19, 13 p., 2799.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Effect of Surface Contamination on Near-Infrared Spectra of Biodegradable Plastics

    Mhaddolkar, N., Koinig, G., Vollprecht, D., Astrup, T. F. & Tischberger-Aldrian, A., 6 Aug 2024, In: Polymers. 16.2024, 16, 22 p., 2343.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Optimization Strategy for Process Design in Rubber Injection Molding: A Simulation-Based Approach Allowing for the Prediction of Mechanical Properties of Vulcanizates

    Traintinger, M., Azevedo, M., Kerschbaumer, R. C., Lechner, B. & Lucyshyn, T., 17 Jul 2024, In: Polymers. 16.2024, 14, 20 p., 2033.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Multi-Material 3D Printing of Biobased Epoxy Resins

    Bergoglio, M., Rossegger, E., Schlögl, S., Griesser, T., Waly, C., Arbeiter, F. & Sangermano, M., 27 May 2024, In: Polymers. 16.2024, 11, 18 p., 1510.

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2023
  8. Published

    Investigating the Aging Behavior of High-Density Polyethylene and Polyketone in a Liquid Organic Hydrogen Carrier

    Surisetty, J. S. S., Sharifian, M., Lucyshyn, T. & Holzer, C., 15 Nov 2023, In: Polymers. 15.2023, 22, 14 p., 4410.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Feasibility Study for Finding Mathematical Approaches to Describe the Optimal Operation Point of Sensor-Based Sorting Machines for Plastic Waste

    Friedrich, K., Kuhn, N. E., Pomberger, R. & Koinig, G., 30 Oct 2023, In: Polymers. 15.2023, 21, 18 p., 4266.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Impact of Multiple Reprocessing on Properties of Polyhydroxybutyrate and Polypropylene

    Main, P., Petersmann, S., Wild, N., Feuchter, M., Duretek, I., Edeleva, M., Ragaert, P., Cardon, L. & Lucyshyn, T., 18 Oct 2023, In: Polymers. 15.2023, 20, 24 p., 4126.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Enhancing High-Pressure Capillary Rheometer Viscosity Data Calculation with the Propagation of Uncertainties for Subsequent Cross-Williams, Landel, and Ferry (WLF) Parameter Fitting

    Hubmann, M., Schuschnigg, S., Duretek, I., Groten, J. & Holzer, C., 24 Jul 2023, In: Polymers. 15.2023, 14, 21 p., 3147.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Effects of Different Polypropylene (PP)-Backbones in Aluminium Feedstock for Fused Filament Fabrication (FFF)

    Momeni, V., Shahroodi, Z., Gonzalez-Gutierrez, J., Hentschel, L., Duretek, I., Schuschnigg, S., Kukla, C. & Holzer, C., 11 Jul 2023, In: Polymers. 15.2023, 4, 18 p., 3007.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Exploring Aromatic S-Thioformates as Photoinitiators

    Rieger, P., Pueschmann, S., Haas, M., Schmallegger, M., Guedes de la Cruz, G. D. C. & Grießer, T., Apr 2023, In: Polymers. 15.2023, 7, 8 p., 1647.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Influence of Injection Molding Parameters on the Peel Strength between Plasma-Treated Fluoropolymer Films and Polycarbonate

    Hubmann, M., Groten, J., Pletz, M., Grießer, T., Plevová, K., Nemitz, W. & Stadlober, B., 21 Mar 2023, In: Polymers. 15.2023, 6, 19 p., 1568.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Sustainable Bio-Based UV-Cured Epoxy Vitrimer from Castor Oil

    Bergoglio, M., Reisinger, D., Schlögl, S., Grießer, T. & Sangermano, M., 18 Feb 2023, In: Polymers. 15.2023, 4, 12 p., 1024.

    Research output: Contribution to journal › Article › Research › peer-review

  16. 2022
  17. Published

    Vat Photopolymerization 3D-Printing of Dynamic Thiol-Acrylate Photopolymers Using Bio-Derived Building Blocks

    Shaukat, U., Sölle, B., Rossegger, E., Rana, S. & Schlögl, S., 8 Dec 2022, In: Polymers. 14.2022, 24, 14 p., 5377.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Process Optimization of Injection Overmolding Structural Electronics with Regard to Film Distortion

    Hubmann, M., Madadnia, B., Groten, J., Pletz, M., Vanfleteren, J., Stadlober, B., Bossuyt, F., Kaur, J. & Lucyshyn, T., 22 Nov 2022, In: Polymers. 14.2022, 23, 20 p., 5060.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Dynamic Behavior of Thermally Affected Injection-Molded High-Density Polyethylene Parts Modified by Accelerated Electrons

    Mizera, A., Krstulovic-Opara, L., Krempl, N., Karhankova , M., Manas, M., Sanek , L., Stoklasek, P. & Grebo, A., 16 Nov 2022, In: Polymers 2022 / Advances in the Mechanical Behavior of Polymeric Materials). 14:2022, 22, 15 p., 4970.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Influence of Binder Composition and Material Extrusion (MEX) Parameters on the 3D Printing of Highly Filled Copper Feedstocks

    Sadaf, M., Cano Cano, S., Gonzalez-Gutierrez, J., Bragaglia, M., Schuschnigg, S., Kukla, C., Holzer, C., Vály , L., Kitzmantel, M. & Nanni, F., 16 Nov 2022, In: Polymers / Molecular Diversity Preservation International. 14.2022, 22, 23 p., 4962.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    A Bird’s-Eye View on Polymer-Based Hydrogen Carriers for Mobile Applications

    Sharifian, M., Kern, W. & Riess, G., 25 Oct 2022, In: Polymers. 14.2022, 21, 26 p., 4512.

    Research output: Contribution to journal › Review article › peer-review

  22. Published

    Influence of Viscose Fibre Geometry on the Structure–Property Relationships of High-Density Polyethylene Composites

    Slapnik, J., Kraft, G., Wilhelm, T., Hribernik, M., Švab, I., Lucyshyn, T. & Pinter, G. G., 18 Oct 2022, In: Polymers. 14.2022, 20, 15 p., 4389.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Peroxide-Based Crosslinking of Solid Silicone Rubber, Part I: Insights into the Influence of Dicumylperoxide Concentration on the Curing Kinetics and Thermodynamics Determined by a Rheological Approach

    Azevedo, M., Monks, A. M., Kerschbaumer, R. C., Schlögl, S. & Holzer, C., 18 Oct 2022, In: Polymers. 14.2022, 20, 22 p., 4404.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Anti-Adhesive Organosilane Coating Comprising Visibility on Demand

    Kern, W., Müller, M., Bandl, C., Krempl, N. & Kratzer, M., 24 Sept 2022, In: Polymers. 14.2022, 19, 20 p., 4006.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Evaluation of improvements in the separation of monolayer and multilayer films via measurements in transflection and application of machine learning approaches

    Koinig, G., Kuhn, N., Barretta, C., Friedrich, K. & Vollprecht, D., 20 Sept 2022, In: Polymers. 14.2022, 19, 28 p., 3926.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Effect of Increased Powder-Binder Adhesion by Backbone Grafting on the Properties of Feedstocks for Ceramic Injection Molding

    Ghasemi-Mobarakeh, L., Cano, S., Momeni, V., Liu, D., Duretek, I., Riess, G., Kukla, C. & Holzer, C., 2 Sept 2022, In: Polymers. 14.2022, 17, 15 p., 3653.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Lifecycle Assessment for Recycling Processes of Monolayer and Multilayer Films: A Comparison

    Koinig, G., Grath, E., Barretta, C., Friedrich, K., Vollprecht, D. & Oreski, G., 1 Sept 2022, In: Polymers. 14.2022, 17, 35 p., 3620.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    A Review of Multi-Material 3D Printing of Functional Materials via Vat Photopolymerization

    Shaukat, U., Rossegger, E. & Schlögl, S., 16 Jun 2022, In: Polymers. 14.2022, 12, 69 p., 2449.

    Research output: Contribution to journal › Review article › peer-review

  29. Published

    Latent Recycling Potential of Multilayer Films in Austrian Waste Management

    Koinig, G., Rutrecht, B., Friedrich, K., Barretta, C. & Vollprecht, D., 11 Apr 2022, In: Polymers. 14.2022, 8, 15 p., 1553.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Surface-Immobilized Photoinitiators for Light Induced Polymerization and Coupling Reactions

    Müller, M., Bandl, C. & Kern, W., 4 Feb 2022, In: Polymers. 14.2022, 3, 49 p., 608.

    Research output: Contribution to journal › Review article › peer-review

  31. 2021
  32. Published

    Relationships between the Decomposition Behaviour of Renewable Fibres and Their Reinforcing Effect in Composites Processed at High Temperatures

    Slapnik, J., Lucyshyn, T. & Pinter, G., 18 Dec 2021, In: Polymers. 13.2021, 24, 16 p., 4448.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Cross-Linking and Evaluation of the Thermo-Mechanical Behavior of Epoxy Based Poly(ionic Liquid) Thermosets

    Wanghofer, F., Wolfberger, A., Wolfahrt, M. & Schlögl, S., 12 Nov 2021, In: Polymers. 13.2021, 22, 19 p., 3914.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Influence of the Mold Material on the Injection Molding Cycle Time and Warpage Depending on the Polymer Processed

    Lucyshyn, T., Enffans D’Avernas, L. V. D. & Holzer, C., 21 Sept 2021, In: Polymers. 13.2021, 18, 16 p., 3196.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Usage of Near-Infrared Spectroscopy for Inline Monitoring the Degree of Curing in RTM Processes

    Salzmann, M., Blößl, Y., Todorovic, A. & Schledjewski, R., 17 Sept 2021, In: Polymers. 13.2021, 18, 13 p., 3145.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    The Relationship between a Defined Microstructure within the Mold Surface and the Corresponding Roughness on the Part: A Systematic Study on Particle Size, Filler-, and Compatibilizer Content

    Kerschbaumer, R. C., Bolka, S., Pesl, T., Duretek, I. & Lucyshyn, T., 17 Aug 2021, In: Polymers. 13.2021, 16, 23 p., 2757.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    On the Influence of Viscoelastic Modeling in Fluid Flow Simulations of Gum Acrylonitrile Butadiene Rubber

    Stieger, S., Mitsoulis, E., Walluch, M., Ebner, C., Roman Christopher, K., Haselmann, M., Mostafaiyan, M., Kämpfe, M., Kühnert, I., Wießner, S. & Friesenbichler, W., 15 Jul 2021, In: Polymers. 13.2021, 14, 18 p., 2323.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Dielectric properties of shrinkage-free poly(2-oxazoline) networks from renewable resources

    Blaschke, F., Marx, P., Hirner, S., Mühlbacher, I., Wewerka, K. & Wiesbrock, F., 13 Apr 2021, In: Polymers. 13.2l021, 8, 15 p., 1263.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Expanding Monomers as Anti-Shrinkage Additives

    Marx, P. & Wiesbrock, F., 6 Mar 2021, In: Polymers. 13.2021, 5, 32 p., 806.

    Research output: Contribution to journal › Review article › peer-review

  40. Published

    Study of the synergetic effect of co-pyrolysis of lignite and high-density polyethylene aiming to improve utilization of low-rank coal

    Kojić, I., Bechtel, A., Aleksić, N., Životić, D., Trifunović, S., Gajica, G. & Stojanović, K., 1 Mar 2021, In: Polymers. 13, 5, p. 1-25 25 p., 759.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Processability of Different Polymer Fractions Recovered from Mixed Wastes and Determination of Material Properties for Recycling

    Möllnitz, S., Feuchter, M., Duretek, I., Schmidt, G., Pomberger, R. & Sarc, R., 31 Jan 2021, In: Polymers. 13.2021, 3, p. 1-43 43 p., 457.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Temperature Profile in Rubber Injection Molding: Application of a Recently Developed Testing Method to Improve the Process Simulation and Calculation of Curing Kinetics

    Traintinger, M., Roman Christopher, K., Lechner, B., Friesenbichler, W. & Lucyshyn, T., 26 Jan 2021, In: Polymers. 13.2021, 3, p. 1-12 12 p., 380.

    Research output: Contribution to journal › Article › Research › peer-review

  43. 2020
  44. Published

    Recent Advances in Functional Polymers Containing Coumarin Chromophores

    Cazin, I., Rossegger, E., Guedes de la Cruz, G., Griesser, T. & Schlögl, S., 25 Dec 2020, In: Polymers. 13.2021, 1, 48 p., 56.

    Research output: Contribution to journal › Review article › peer-review

  45. Published

    Tailored Interfaces in Fiber-Reinforced Elastomers: A Surface Treatment Study on Optimized Load Coupling via the Modified Fiber Bundle Debond Technique

    Beter, J., Maroh, B., Schrittesser, B., Mühlbacher, I., Griesser, T., Schlögl, S., Fuchs, P. F. & Pinter, G., 24 Dec 2020, In: Polymers. 13.2020, 1, p. 1-17 17 p., 36.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Development of Porous Polyurethane Implants Manufactured via Hot-Melt Extrusion

    Koutsamanis, I., Spoerk, M., Arbeiter, F., Eder, S. & Roblegg, E., 10 Dec 2020, In: Polymers. 12.2020, 12, p. 1-22 22 p., 2950.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Investigation of the influence of viscoelastic behaviour on the lifetime of short fibre reinforced polymers

    Stadler, G., Primetzhofer, A., Jerabek, M., Pinter, G. & Grün, F., Dec 2020, In: Polymers. 12, 12, p. 1-13 13 p., 2874.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    The Tension-Twist Coupling Mechanism in Flexible Composites: A Systematic Study Based on Tailored Laminate Structures Using a Novel Test Device

    Beter, J., Schrittesser, B., Meier, G., Lechner, B., Mansouri, M., Fuchs, P. F. & Pinter, G., 24 Nov 2020, In: Polymers. 12.2020, 12, p. 1-16 16 p., 2780.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Processing Conditions of a Medical Grade Poly(Methyl Methacrylate) with the Arburg Plastic Freeforming Additive Manufacturing Process

    Hentschel, L., Kynast, F., Petersmann, S., Holzer, C. & Gonzalez-Gutierrez, J., 2 Nov 2020, In: Polymers. 12, 11, p. 1-15 15 p., 2677.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Investigation of the Adsorption Behavior of Jet-Cooked Cationic Starches on Pulp Fibers

    Ferstl, E., Gabriel, M., Gomernik, F., Müller, S. M., Selinger, J., Thaler, F., Bauer, W., Uhlig, F., Sprik, S. & Chemelli, A., 29 Sept 2020, In: Polymers. 12.2020, 10, 13 p., 2249.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Causes of the Gloss Transition Defect on High-Gloss Injection-Molded Surfaces

    Gim, J., Han, E., Rhee, B., Friesenbichler, W. & Gruber, D. P., 15 Sept 2020, In: Polymers. 12.2020, 9, 16 p., 2100.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Review on UV-induced cationic frontal polymerization of epoxy monomers

    Malik, M. S., Schlögl, S., Wolfahrt, M. & Sangermano, M., Sept 2020, In: Polymers. 12, 9, 2146.

    Research output: Contribution to journal › Review article › peer-review

  53. Published

    Viscoelastic Behavior of Glass-Fiber-Reinforced Silicone Composites Exposed to Cyclic Loading

    Beter, J., Schrittesser, B., Lechner, B., Mansouri, M. R., Marano, C., Fuchs, P. F. & Pinter, G., 19 Aug 2020, In: Polymers. 12.2020, 9, 17 p., 1862.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Biofunctional Glycol-Modified Polyethylene Terephthalate and Thermoplastic Polyurethane Implants by Extrusion-Based Additive Manufacturing for Medical 3D Maxillofacial Defect Reconstruction

    Katschnig, M., Wallner, J., Janics, T., Burgstaller, C., Zemann, W. & Holzer, C., 5 Aug 2020, In: Polymers. 12.2020, 8, 1751.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    The impact of vitrimers on the industry of the future: Chemistry, properties and sustainable forward-looking applications

    Alabiso, W. & Schlögl, S., Aug 2020, In: Polymers. 12, 8, 1660.

    Research output: Contribution to journal › Review article › peer-review

  56. Published

    Introduction of a new in-situ measurement system for the study of touch-feel relevant surface properties

    Ules, T., Hausberger, A., Grießer, M., Schlögl, S. & Gruber, D. P., 1 Jun 2020, In: Polymers. 12.2020, 6, 1380.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Ultra-High Through-Cure of (Meth) Acrylate Copolymers via Photofrontal Polymerization

    Ebner, C., Mitterer, J., Eigruber, P., Stieger, S., Rieß, G. & Kern, W., 1 Jun 2020, In: Polymers. 12, 6, 1291.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Epoxy-anhydride vitrimers from aminoglycidyl resins with high glass transition temperature and efficient stress relaxation

    Giebler, M., Sperling, C., Kaiser, S., Duretek, I. & Schlögl, S., 17 May 2020, In: Polymers. 12, 5, p. 1 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Comparison and Impact of Different Fiber Debond Techniques on Fiber Reinforced Flexible Composites

    Beter, J., Schrittesser, B., Maroh, B., Sarlin, E., Fuchs, P. F. & Pinter, G., 18 Feb 2020, In: Polymers. 12.2020, 2, 11 p., 472.

    Research output: Contribution to journal › Article › Research › peer-review

  60. 2019
  61. Published

    Physical Foaming and Crosslinking of Polyethylene with Modified Talcum

    Kaltenegger-Uray, A., Rieß, G., Lucyshyn, T., Holzer, C. & Kern, W., 9 Sept 2019, In: Polymers. 11.2019, 9, 15 p., 1472.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Mechanical Recyclability of Polypropylene Composites Produced by Material Extrusion-Based Additive Manufacturing

    Spörk, M., Arbeiter, F., Raguz, I., Holzer, C. & Gonzales-Gutierrez, J., 7 Aug 2019, In: Polymers. 11.2019, 8, 18 p., 1318.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Identification and Quantification of Cell Gas Evolution in Rigid Polyurethane Foams by Novel GCMS Methodology

    Galakhova, A., Santiago-Calvo, M., Tirado-Mediavilla, J., Villafane, F., Rodriguez-Perez, M. A. & Rieß, G., 17 Jul 2019, In: Polymers. 11.2019, 7, p. 1192-1202 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Preparation of a water-based photoreactive azosulphonate-doped poly(vinyl alcohol) and the investigation of its UV response

    Nothdurft, P., Schauberger, J. G., Riess, G. & Kern, W., 18 Jan 2019, In: Polymers. 11, 1, 169.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    The Effect of the Surface Area of Carbon Black Grades on HNBR in Harsh Environments

    Balasooriya, W., Schrittesser, B., Pinter, G., Schwarz, T. & Conzatti, L., 4 Jan 2019, In: Polymers. 11.2019, 1, 61.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Polyethylene Nanocomposites for Power Cable Insulations

    Plesa, G.-I., Schlögl, S., Noţingher, P., Stancu, C. & Wiesbrock, F., 2019, In: Polymers. 11.2019, 1

    Research output: Contribution to journal › Article › Research › peer-review

  67. 2018
  68. Published

    Optimisation of the Adhesion of Polypropylene-Based Materials during Extrusion-Based Additive Manufacturing

    Spörk, M., Gonzalez-Gutierrez, J., Lichal, C., Cajner, H., Berger, G., Schuschnigg, S., Cardon, L. & Holzer, C., 2 May 2018, In: Polymers. 10.2018, 5, 16 p., 490.

    Research output: Contribution to journal › Article › Research › peer-review

  69. 2017
  70. Published

    Calculation of the contact Angle of Polymer Melts on Tool Surfaces from Viscosity Parameters

    Zitzenbacher, G., Dirnberger, H., Längauer, M. & Holzer, C., 30 Dec 2017, In: Polymers. 10.2017, 38, 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Effect of interfacial polarization and water absorption on the dielectric properties of epoxy-nanocomposites

    Marx, P., Wanner, A. J., Zhang, Z., Jin, H., Tsekmes, I. A., Smit, J. J., Kern, W. & Wiesbrock, F., 28 May 2017, In: Polymers. 9.2017, 6, 16 p., 195.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Ammoxidized Fenton-Activated Pine Kraft Lignin Accelerates Synthesis and Curing of Resole Resins

    Ghorbani, M., Konnerth, J., Budjav, E., Requejo Silva, A., Zinovyev, G., van Herwijnen, H. W. G., Edler, M., Grießer, T. & Liebner, F., 28 Jan 2017, In: Polymers. 9.2017, 2, 17 p., 43.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    A Review of Multiscale Computational Methods in Polymeric Materials

    Gooneie, A., Schuschnigg, S. & Holzer, C., 9 Jan 2017, In: Polymers / Molecular Diversity Preservation International. 9.2017, 1, 80 p., 16.

    Research output: Contribution to journal › Article › Research › peer-review

  74. 2016
  75. Published

    Atomistic Modelling of Confined Polypropylene Chains between Ferric Oxide Substrates at Melt Temperature

    Gooneie, A., Gonzalez-Gutierrez, J. & Holzer, C., 14 Oct 2016, In: Polymers / Molecular Diversity Preservation International. 8.2016, 10, p. 361-380 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Mechanical Properties of Composites Used in High-Voltage Applications

    Moser, A. & Feuchter, M., 2016, In: Polymers / Molecular Diversity Preservation International.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Mica/Epoxy Composites in the Electrical Industry: Applications, Composits for Insulations, and Investigations on Failure Mechanisms for Prospective Optimizations

    Kern, W., Andraschek, N., Wanner, A. J., Ebner, C. & Rieß, G., 2016, In: Polymers. 8, 5, p. 201

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Microfibrillated Lignocellulose Enables the Suspension-Polymerisation of Unsaturated Polyester Resin for Novel Composite Applications

    Yutao Yan 1, Sabine Herzele 2, Arunjunai Raj Mahendran 2, Matthias Edler 3, Thomas Griesser 3, Bodo Saake 4, Jianzhang Li 1,* and Wolfgang Gindl-Altmutter 5,*, 2016, In: Polymers. 8, 255

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Properties of Polymer Composites Used in High-Voltage Applications

    Plesa, G.-I., Noţingher, P., Schlögl, S., Sumereder, C. & Muhr, M., 2016, In: Polymers. 2016, 8

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations