Materials and Design, ‎0264-1275

Journal

ISSNs0264-1275, 0261-3069
Additional searchable ISSN (electronic)1873-4197
41 - 60 out of 104Page size: 20

Research output

  1. 2021
  2. Published

    Assessment of grain boundary cohesion of technically pure and boron micro-doped molybdenum via meso-scale three-point-bending experiments

    Jakob, S., Hohenwarter, A., Lorich, A., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., 24 May 2021, In: Materials and Design. 207.2021, September, 8 p., 109848.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Machine learning assisted calibration of a ductile fracture locus model

    Baltic, S., Asadzadeh, M. Z., Hammer, P., Magnien, J., Gänser, H. P., Antretter, T. & Hammer, R., May 2021, In: Materials and Design. 203.2021, May, 15 p., 109604.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Enhanced fracture toughness in ceramic superlattice thin films: On the role of coherency stresses and misfit dislocations

    Wagner, A., Holec, D., Mayrhofer, P. H. & Bartosik, M., Apr 2021, In: Materials and Design. 2021, 202, 10 p., 109517.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Strength ranking for interfaces between a TiN hard coating and microstructural constituents of high speed steel determined by micromechanical testing

    Gsellmann, M., Klünsner, T., Mitterer, C., Krobath, M., Wurmshuber, M., Leitner, H., Ecker, W., Marsoner, S., Maier-Kiener, V., Kiener, D. & Ressel, G., 31 Mar 2021, In: Materials and Design. 204.2021, June, 11 p., 109690.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Adhesion evaluation of thin films to dielectrics in multilayer stacks: A comparison of four-point bending and stressed overlayer technique.

    Lassnig, A., Putz, B., Hirn, S., Többens, D., Mitterer, C. & Cordill, M. J., 15 Feb 2021, In: Materials and Design. 200, 15 February, 8 p., 109451.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    The MoN–TaN system: Role of vacancies in phase stability and mechanical properties

    Klimashin, F., Lobmaier, L., Koutná, N., Holec, D. & Mayerhofer, P. H., 9 Feb 2021, In: Materials and Design. 202.2021, April, 12 p., 109568.

    Research output: Contribution to journal › Article › Research › peer-review

  8. E-pub ahead of print

    Laser powder bed fusion of an engineering intermetallic TiAl alloy

    Schimbäck, D., Braun, J., Leichtfried, G., Clemens, H. & Mayer, S., 22 Jan 2021, (E-pub ahead of print) In: Materials and Design. 201.2021, March, 11 p., 109506.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    An understanding of hydrogen embrittlement in nickel grain boundaries from first principles

    Mai, H. L., Cui, X.-Y., Scheiber, D., Romaner, L. & Ringer, S. P., 2021, In: Materials and Design. 2021, 212, p. 1-16

    Research output: Contribution to journal › Article › Research › peer-review

  10. 2020
  11. E-pub ahead of print

    Evolution of stress fields during crack growth and arrest in a brittle-ductile CrN-Cr clamped-cantilever analysed by X-ray nanodiffraction and modelling

    Meindlhumer, M., Brandt, L. R., Zalesak, J., Rosenthal, M., Hruby, H., Kopecek, J., Salvati, E., Mitterer, C., Daniel, R., Todt, J., Keckes, J. & Korsunsky, A. M., 28 Nov 2020, (E-pub ahead of print) In: Materials and Design. 2021, 198, 16 p., 109365.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Multi-scale interface design of strong and damage resistant hierarchical nanostructured materials

    Daniel, R., Meindlhumer, M., Zalesak, J., Baumegger, W., Todt, J., Ziegelwanger, T., Keckes, J., Mitterer, C. & Keckes, J., Nov 2020, In: Materials and Design. 196, November, p. 1-11 109169.

    Research output: Contribution to journal › Article › Research › peer-review

  13. E-pub ahead of print

    Multi-method characterization approach to facilitate a strategy to design mechanical and electrical properties of sintered copper

    Wijaya, A., Eichinger, B., Chamasemani, F. F., Sartory, B., Hammer, R., Maier-Kiener, V., Kiener, D., Mischitz, M. & Brunner, R., 28 Sept 2020, (E-pub ahead of print) In: Materials and Design. 2021, 197, 11 p., 109188.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Open-cell tungsten nanofoams: Scaling behavior and structural disorder dependence of Young's modulus and flow strength

    Zhao, M., Schlueter, K., Wurmshuber, M., Reitgruber, M. & Kiener, D., 26 Sept 2020, In: Materials and Design. 2021, 197, 12 p., 109187.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Nanoscale stress distributions and microstructural changes at scratch track cross-sections of a deformed brittle-ductile CrN-Cr bilayer

    Meindlhumer, M., Zalesak, J., Ecker, W., Rosenthal, M., Niese, S., Gawlitza, P., Hruby, H., Mitterer, C., Daniel, R., Keckes, J. & Todt, J., 5 Aug 2020, In: Materials & design. 195.2020, October, 16 p., 109023.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Warm-forming of pre-aged Al-Zn-Mg-Cu alloy sheet

    Österreicher, J. A., Tunes, M. A., Grabner, F., Arnoldt, A., Kremmer, T., Pogatscher, S. & Schlögl, C. M., Aug 2020, In: Materials and Design. 193, p. 108837 1 p., 108837.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    An analytical solution for the correct determination of crack lengths via cantilever stiffness

    Alfreider, M., Kolitsch, S., Wurster, S. & Kiener, D., 27 Jun 2020, In: Materials and Design. 194.2020, September, 3 p., 108914.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Fracture properties of thin film TiN at elevated temperatures

    Buchinger, J., Löfler, L., Ast, J., Wagner, A., Chen, Z., Michler, J., Zhang, Z., Mayrhofer, P. H., Holec, D. & Bartosik, M., 13 Jun 2020, In: Materials & design. 194.2020, September, p. 1-10 10 p., 108885.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Room temperature recovery of cryogenically deformed aluminium alloys

    Gruber, B., Grabner, F., Falkinger, G., Schökel, A., Spieckermann, F., Uggowitzer, P. J. & Pogatscher, S., 23 May 2020, In: Materials & design. 193.2020, August, 108819.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Thermally activated deformation mechanisms and solid solution softening in W-Re alloys investigated via high temperature nanoindentation

    Kappacher, J., Leitner, A., Kiener, D., Clemens, H. & Maier-Kiener, V., 1 Apr 2020, In: Materials and Design. 189.2020, April, 6 p., 108499.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Microstructures, mechanical properties and deformation of near-rapidly solidified low-density Fe-20Mn-9Al-1.2C-xCr steels

    Zhang, J., Hu, C., Zhang, Y., LI, J., Song, C. & Zhai, Q., 15 Jan 2020, In: Materials and Design. 186.2020, 15 January, 13 p., 108307.

    Research output: Contribution to journal › Article › Research › peer-review

  22. 2019
  23. Published

    Influence of annealing on microstructure and mechanical properties of ultrafine-grained Ti45Nb

    Völker, B., Maier-Kiener, V., Werbach, K., Müller, T., Pilz, S., Calin, M., Eckert, J. & Hohenwarter, A., 5 Oct 2019, In: Materials and Design. 179.2019, 5 October, 11 p., 107864.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 Next
View graph of relations