Materials and Design, ‎0264-1275

Journal

ISSNs0264-1275, 0261-3069
Additional searchable ISSN (electronic)1873-4197
1 - 20 out of 104Page size: 20

Research output

  1. 2025
  2. Published

    3D multi-site hydrogen evolution reaction catalysts on nanoimprinted surfaces, structured via multi-photon lithography derived masks

    Jelinek, A., Neumüller, D., Gammer, C., Eckert, J. & Kiener, D., Apr 2025, In: Materials and Design. 252, 113809.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Combined X-ray microdiffraction and micromechanical testing for direct measurement of thin film elastic constants

    Janknecht, R., Hahn, R., Koutná, N., Todt, J., Meindlhumer, M., Davidok, A., Riedl, H., Keckes, J. & Mayrhofer, P. H., 15 Feb 2025, In: Materials and Design. 252.2025, April, 11 p., 113720.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    A high-throughput framework for pile-up correction in high-speed nanoindentation maps

    Rossi, E., Duranti, D., Rashid, S., Zitek, M., Daniel, R. & Sebastiani, M., 11 Feb 2025, In: Materials and Design. 251.2025, March, 18 p., 113708.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    20 kHz X-ray diffraction on Cu thin films explores thermomechanical fatigue at high strain-rates

    Ziegelwanger, T., Reisinger, M., Vedad, B., Hlushko, K., Van Petegem, S., Todt, J., Meindlhumer, M. & Keckes, J., 31 Jan 2025, In: Materials and Design. 251.2025, March, 9 p., 113664.

    Research output: Contribution to journal › Article › Research › peer-review

  6. 2024
  7. Published

    Enhanced hydrogen evolution via nano-patterned Pt-based metallic glass and dynamic copper oxide foam formation

    Cai, F.-F., Sarac, B., Akman, A., Londoño, J. J., Gümrükcü, S., Schweiger, L., Hantusch, M., Schroers, J., Blatter, A., Gebert, A., Spieckermann, F. & Eckert, J., 12 Dec 2024, In: Materials and Design. 249.2025, January, 11 p., 113530.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Assessing the fracture toughness in Tungsten-based nanocomposites: A micro-mechanical approach

    Schmuck, K. S., Burtscher, M., Alfreider, M. & Kiener, D., 6 Nov 2024, In: Materials and Design. 247.2024, November, 11 p., 113433.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Dispersoid evolution in Al–Zn–Mg alloys by combined addition of Hf and Zr: A mechanistic approach

    Wessely, V., Töpfer, U., Basu, I., Schäublin, R. E., Pogatscher, S., Uggowitzer, P. & Löffler, J. F., 6 Oct 2024, In: Materials and Design. 247.2024, November, 17 p., 113366.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Glass and nanocrystalline phase formation in CuZrAg alloys: Insights from combinatorial thin film libraries studied by mapping synchrotron X-ray diffraction

    Putz, B., Milkovič, O., Mohanty, G., Ipach, R., Pethö, L., Milkovičová, J., Saksl, K. & Michler, J., Aug 2024, In: Materials and Design. 244, 113144.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Automatic and time-resolved determination of fracture characteristics from in situ experiments

    Schmuck, K. S., Antenreiter, M., Alfreider, M. & Kiener, D., Jul 2024, In: Materials & design. 243.2024, July, 12 p., 113038.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Probing local adhesion: A miniaturized multi-photon lithography design demonstrated on silanized vs. untreated surfaces

    Jelinek, A., Rossegger, E., Schlögl, S., Kiener, D. & Alfreider, M., Jun 2024, In: Materials and Design. 242.2024, June, 13 p., 112994.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Additive manufacturing of 3D yttria-stabilized zirconia microarchitectures

    Winczewski, J. P., Zeiler, S., Gabel, S., Maestre, D., Merle, B., Gardeniers, J. G. E. & Susarrey-Arce, A., 1 Feb 2024, In: Materials and Design. 238.2024, February, 11 p., 112701.

    Research output: Contribution to journal › Article › Research › peer-review

  14. 2023
  15. Published

    Nanoscale printed tunable specimen geometry enables high-throughput miniaturized fracture testing

    Jelinek, A., Žák, S., Cordill, M. J., Kiener, D. & Alfreider, M., Oct 2023, In: Materials and Design. 234.2023, October, 17 p., 112329.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Microstructural refinement by spontaneous recrystallization without prior deformation of a 15-5 PH steel alloy and its mechanism

    Ressel, G., Brandl, D., Hönigmann, T., Lukas, M., Stark, A., Gruber, C., Lukas, S., Stockinger, M. & Kozeschnik, E., 27 Sept 2023, In: Materials and Design. 234.2023, October, 11 p., 112370.

    Research output: Contribution to journal › Article › Research › peer-review

  17. E-pub ahead of print

    Mapping strain across Co80Ta7B13 / Co62Ta6B32 glassy interfaces

    Evertz, S., Zalesak, J., Hans, M., Jansen, H. C., Keckes, J., Sheng, H., Eckert, J. & Gammer, C., 15 Sept 2023, (E-pub ahead of print) In: Materials and Design. 234.2023, October, 7 p., 112327.

    Research output: Contribution to journal › Article › Research › peer-review

  18. E-pub ahead of print

    Design of high-strength martensitic steels by novel mixed-metal nanoprecipitates for high toughness and suppressed hydrogen embrittlement

    Moshtaghi, M., Maawad, E., Bendo, A., Krause, A., Todt, J., Keckes, J. & Safyari, M., 14 Sept 2023, (E-pub ahead of print) In: Materials & design. 234.2023, October, 15 p., 112323.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Direct observation of crack arrest after bridge notch failure: A strategy to increase statistics and reduce FIB-artifacts in micro-cantilever testing

    Zhang, Y., Bartosik, M., Brinckmann, S., Lee, S. & Kirchlechner, C., Sept 2023, In: Materials and Design. 233.2023, September, 7 p., 112188.

    Research output: Contribution to journal › Article › Research › peer-review

  20. E-pub ahead of print

    Ti40Zr10Cu36Pd14 bulk metallic glass as oral implant material

    Rezvan, A., Sharifikolouei, E., Soprunyuk, V., Schranz, W., Todt, J., Lassnig, A., Gammer, C., Sifferlinger, N. A., Asci, A., Okulov, I., Schlögl, S., Keckes, J., Najmi, Z., Cochis, A., Scalia, A. C., Rimondini, L., Sarac, B. & Eckert, J., 16 Aug 2023, (E-pub ahead of print) In: Materials and Design. 233.2023, 10 p., 112256.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Exploring the high-temperature deformation behavior of monocrystalline silicon – An advanced nanoindentation study

    Schaffar, G., Tscharnuter, D. & Maier-Kiener, V., 29 Jul 2023, In: Materials and Design. 2023, 233, 10 p., 112198.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Exploring the mechanical properties of additively manufactured carbonrich zirconia 3D microarchitectures

    Winczewski, J. P., Zeiler, S., Gabel, S., Susarrey-Arce, A., Gardeniers, J. G. E. & Merle, B., 11 Jul 2023, In: Materials and Design. 232.2023, August, 11 p., 112142.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Nanoindentation creep of supercrystalline nanocomposites

    Yan, C., Bor, B., Plunkett, A., Domenech, B., Maier-Kiener, V. & Giuntini, D., Jul 2023, In: Materials and Design. 231.2023, July, 14 p., 112000.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 Next
View graph of relations